Develop Bugs

Annoying sound problem

Hello. I have a problem with sound in my kaiser with Android. I tried 2 systems [Cynanogen mod 6 (Froyo) and Myn's Warm Donut], 4 radios (from 1.71 to 1.65) and 2 kernels. Sound never appeared. Why?

what zimage or nbh you using if you are using a older one it might have problems

Did you mean kernel? the newest from this page:
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D

it may be that you have muted the media volume in settings.

No. I don't have any sound. Not only media. When someone calls to me, I cannot hear him too and this person cant hear me too.

Audio issue
I have the same problem. I tried different builds and nothing helps. Any suggestions??

Just a thought, but have you tried flashing a stock rom, then flashing to nand again? Flashing a stock rom clears the entire nand, leaving no possibility of stray bits of data left from custom roms.

I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!

<refresh>.

Mu_aawiyah said:
I have to say, I get the same thing, but with a slight variation. Sound works for me up until i make at least one call (but could happen before that). Once I make that call, either during the call, or after, the sound is gone. I too had myn's donut, and then frayo, and both times, the exact same problem. I will try to flash the stock rom, and then back to android, but it is a problem that I also share.
This is my first post on xda, so please be nice!
Click to expand...
Click to collapse
Yeah, flashed it back to a the most recent stock rom, and then back to andriod.. how works perfectly. Sorry i didnt tell you guys earlier.
I think it was to do with the radio thingy-ma-jig. I flashed it with winmo 6.1 from htc website, and then back again.
Now i'm runnying frayo.

I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/

Wagierek said:
I flashed the newest stock rom from htc site too, then 1.65 radio, but it didn't help :/
Click to expand...
Click to collapse
That is most likely because you didnt flash it right. take the .nhb from it, plug it into your sd card and flash it from sd. try that.

I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?

Wagierek said:
I'm not stupid. I always flash anything like that-not via CustomRUU-because I have damaged my USB socket and now my Kaiser cannot be recognized by computer.
PS: Today when I booted my Kaiser, next to ANDROID word, I saw "handset status changed to 1". When I rebooted, it didn't show. What's this?
Click to expand...
Click to collapse
Well, with regards to how I got it fixed (the detailed explanation), i flashed it with a custom winmob rom initially, but surprisingly, the same problem i had with android was happening with the winmob. I could make a call after reboot, but after that call, the sound completely died, and the camera did not work. So i tried to flash with the latest stock rom. I've uploaded the actual roms i used on my public drop box folder here => "i tried posting the link, but because i'm new, it wouldnt allow me...pm me"
I am not a professional on flashing, rather i am a beginner. My tytn 2 is a european T-mobile version. I tried to flash it, it did it half way...then stopped! I tried to do it again, but then it just said "...loading..." and would not go past it. But when i booted to my custom rom, it was still there, but the problems had gone. I guessed that it flashed the radio, and nothing else.
When i then went to android, it worked perfectly.
That was my journey.
I hope that helped... maybe.

Unfortunately, it didn't help.
Any other ideas?

I solved mine by changing radio ROM,but i lost sound and camera in windows,any ROM that fit both android and windows???

What version did you flash?

1.65.14.06

Me too!
I flahsed froyo last night and didn't test after makng calls. I'm having the same issue (lose sound after a phone call). I followed the sticky guide and sim unlocked the radio before flashing (which I think I had already done before). I will try changing radios when I get home to see if this resolves the issue and post my results.
Update: I flashed 1.71.09.01 on my ATT Tilt and this fixed the issue. Now sound and camera work great. Phone runs faster also!

Bluetooth problem - need help

Bluetooth problem - need help
Here is my situation. I have a EVO 4G Rooted with rooted 3.29.651.5.
My phone's bluetooth paired perfectly with my car for several months.
Then I installed Vlingo and my bluetooth stopped working with my car. I uninstalled Vlingo and the bluetooth worked only sporadically. Since then I have tried almost everything I can and have searched for weeks to get this to work.
I have tried:
* complete wipe and reinstall of ota rooted rom
* reinstalled Vlingo tested, then unistalled again
* deleted and then restored backups of BrcmBlueToothServices 1.0 and Bluetooth Share 2.2
* deleted BrcmBlueToothServices 1.0 and Bluetooth Share 2.2 then flashed rooted ota rom to get clean copies back again (I hope)
* Unpaired my Evo from my car then paired them again.
* Upgraded to rooted 3.30.651.2n.
* Flashed a new King's Kernel #11 (2.6.32.24-king-hav-OcUv)
I know it is not my car as my wife as the same phone I have. I rooted it and except for the recent kernel change on my phone the only real difference is that I never put Vlingo on her phone. I can pair her phone perfectly with my car and it works great just like mine did before Vlingo.
I'm not an expert, my learning curve was huge to get to root and I have done a lot of reading to try to figure this out.
ANY help would be appreciated! I need my phone to work with my car as I'm on the phone a lot.

The kernels will break bluetooth on the CM builds.
The CM framework has been redone and there are few compatable kernels. Yes kings kernel will work, but not everything. Currently, there is no custom kernel (beside the stock CM kernel in each build) that will work and keep bluetooth working on CM roms

kthejoker20 said:
The kernels will break bluetooth on the CM builds.
The CM framework has been redone and there are few comparable kernels. Yes kings kernel will work, but not everything. Currently, there is no custom kernel (beside the stock CM kernel in each build) that will work and keep bluetooth working on CM roms
Click to expand...
Click to collapse
Thanks You very much for your response. Since my technical level is a little limited let me see if I understand. You are saying that my rooted stock ROM is a Cyanogen Mod Build. That ROMS made using this with stock kernels should work with Bluetooth, but if you use a custom kernel there could be a problem.
If this a correct understanding, the only problem is that I was using the stock kernel that came with the ROM and it was working fine for weeks. Then I installed Vlingo and the problem arose. I then unistalled Vlingo and the problem still persisted. Days later I then switched kernels in an attempt to fix the problem. I have the same problem regardless of which kernel I use.
Do you have a suggestion for a solution? Again, thank you.

bluetooth
nykbob said:
Thanks You very much for your response. Since my technical level is a little limited let me see if I understand. You are saying that my rooted stock ROM is a Cyanogen Mod Build. That ROMS made using this with stock kernels should work with Bluetooth, but if you use a custom kernel there could be a problem.
If this a correct understanding, the only problem is that I was using the stock kernel that came with the ROM and it was working fine for weeks. Then I installed Vlingo and the problem arose. I then unistalled Vlingo and the problem still persisted. Days later I then switched kernels in an attempt to fix the problem. I have the same problem regardless of which kernel I use.
Do you have a suggestion for a solution? Again, thank you.
Click to expand...
Click to collapse
i have the same problem did everything mentioned above, rooted my wife evo and mine my Bluetooth doesn't work on mine hers does, maybe the devs could make a backup flashable zip for Bluetooth and htc syn that would be great

Using rooted file manager, I can get to the bluetooth.apk and BrcmBluetoothServices.apk files. When I click on either one of them I get a message that asks:
"Replace Application
This is a system application. Do you still want to replace it?
All previous user data will be saved."​
Question, If I say "OK" what does it replace with? Maybe replacing these two files will change things for me so I can get my BLuetooth function back again.
Any comments?

Nothing I have done has gotten my bluetooth function back again. I'm desperate. Anyone have any ideas. What is frustrating is that my wife's Evo will work just fine in my car, but mine has not ever since I tried Vlingo.
There must be a way to reinstall bluetooth without having to do a factory reset and start all over again. (And I'm not sure that would do it anyway.)
Anyone with suggestions?

Update: I just flashed the updated stock ROM (New_RUU_Supersonic_3.30.651.3_Deodexed_signed - http://www.4shared.com/file/yLaxLUnJ...RUU_Super.html) from http://forum.xda-developers.com/showthread.php?t=836728.
"So Far - So Good" as my bluetooth suddenly worked again. I have flashed the previous stock 3.30.651.2 ROM and nothing changed. This also comes with a updates stock kernel. So who knows, may be this update fixed the problem. I'm keeping my fingers crossed.
BTW, I forgot to wipe anything when I did this update. All good so far.
Later: It works better but not consistent. I still have problems where after a phone call I have to turn the bluetooth off, then on again to make or receive additional phone calls.

I think i fixed my bluetooth !!!!!!
I THINK I FIXED IT !!!!!!
Wow after over 2 months of searching, learning, and trying everything I could think of (other than unrooting and going stock) I stumbled upon what seems to be a solution.
Here is what I did:
Using ASTRO file manager I opened up the "system" folder then opened the "app" folder. From there I scrolled down to the "BrcmBluetoothServices" file and long clicked it until the "File Options" appeared. Then I selected "Edit" and on the next pop-up I selected "Delete". (I was desperate and was going to delete it and reinstall from scratch).
When I selected Delete, a confirmation box appeared that said something that caught my eye like, "Are you sure you want to delete the update as this will return the file to stock?" (or something like that). WOW, when I heard delete the update I figured that Vlingo may have updated this file causing the problems. So I said yes. The update was deleted.
The BrcmBluetoothServices file remained but evidently it reverted to its original stock format. I noticed that my Evo no longer showed a pairing with my car. So I went to my car and deleted that pairing as well and then re-paired my car and phone.
Success! I have been using it for a day and so far so good. My Evo instantly connects with my car when I turn the car on, and I can make and receive phone calls normally. It has only been one day, but it looks good so far!!!
This did fix the problem. Working now for 2 weeks.

[Q] Microphone stops working with latest roms

Right now my G2 is running Cyanogenmod-7.1.0 RC1. For the last few months any time I try to update past this version of the rom I lose my microphone. It works absolutely fine with 7.1 but when I go to 7.2 it breaks. For example, When I am on a call I can hear the other person but it is silent on my end. Voice recording programs do not work either, all that it records is a low level of static noise.
I have also tried CM9 and audacity beta4 with the exact same results. When I flash my phone back to 7.1 everything is fine.
Is there some way that I can flash just the old microphone drivers onto the new roms? I am competent enough to follow instructions but not enough to start breaking builds apart for the individual pieces so I don't know where to start.
I have always done a full wipe on everything before I flash.
Does anyone have any ideas? Thank you!
Currently I am running:
Radio: 12.52.60.25U_26.08.04.30_M3
Kernal: [email protected] #1
Mod: Cyanogenmod-7.1.0 RC1 vision
Build number: GRJ22

a
Didn't try any of those,
but this rom:
http://forum.xda-developers.com/showthread.php?t=1492461
works great on my HTC Desire Z with absolutely no issues
It does take a bit of customizing.

I've tried that rom as well but have a whole different issue with that one for some reason. I flash it and then start to reboot and once the phone gets to the white htc screen it freezes with a few horizontal lines running across it. I have to pull the battery and then flash back to my older rom. I have no idea what is going wrong there.
Here might be a dumb question...
Would it help to flash a new kernal? Are the appropriate kernals included in the roms already?

haymaker said:
I've tried that rom as well but have a whole different issue with that one for some reason. I flash it and then start to reboot and once the phone gets to the white htc screen it freezes with a few horizontal lines running across it. I have to pull the battery and then flash back to my older rom. I have no idea what is going wrong there.
Here might be a dumb question...
Would it help to flash a new kernal? Are the appropriate kernals included in the roms already?
Click to expand...
Click to collapse
Hi! Do you solve your problem? I have the same thing there. All the CM roms above 7.0.3 not working with microphone. Do you have still the Cyanogenmod-7.1.0 RC1 file rom and can you upload for me?
Thank you!

[Q] Can't hear anything when making calls!! HELP!

I probably messed up my phone right when i flashed a radio.img
I honeslty didn't know what I was doing and need major help. I can place calls and calls will go through but i am not hearing anything through the speakers nor can they hear me.
I went back to the toolkit and just flashed everything back to stock but still has the same problems at the moment =(
need help please!

okay, after couple flashes... i can at least hear the others voice but my mic is not working at all. what can fix this issue?

What kind of radio did you flash? One that was for your device, i.e. a gsm radio on a gsm device, or a cdma radio on a verizon device? Maybe it's something simple like lint in the microphone hole. You phone's status connects to your mobile network? Try a recording program to see if its limited to the phone.apk, or if its all microphone input. If not, did you try wiping caches and even a factory reset? Maybe you'd need a reflash of the system.img, if you have not reset it since flashing an (assumed) incorrect radio.

bodh said:
What kind of radio did you flash? One that was for your device, i.e. a gsm radio on a gsm device, or a cdma radio on a verizon device? Maybe it's something simple like lint in the microphone hole. You phone's status connects to your mobile network? Try a recording program to see if its limited to the phone.apk, or if its all microphone input. If not, did you try wiping caches and even a factory reset? Maybe you'd need a reflash of the system.img, if you have not reset it since flashing an (assumed) incorrect radio.
Click to expand...
Click to collapse
I flashed the one specifically for my phone. The verizon Gnex and the radio was for the LTE. I took the radio.img from the verizon samsung galaxy nexus development section as well.
After that I booted it to recovery, did all the steps like wipe cache and dalvik and installed the custom rom, gapps, kernel, and then the radio.
Would that have triggered it?

Are both the custom ROM and radio 4.2.2and for Toro?
Did you clean flash the ROM?
Did you restore apps via titanium?
Does the error happen is you don't have any apps installed?

mrxtokki said:
I probably messed up my phone right when i flashed a radio.img
I honeslty didn't know what I was doing and need major help. I can place calls and calls will go through but i am not hearing anything through the speakers nor can they hear me.
I went back to the toolkit and just flashed everything back to stock but still has the same problems at the moment =(
need help please!
Click to expand...
Click to collapse
I am having intermittent issues where I can't hear anyone nor can I play back videos or music either. It sounds like our issues are similiar. I am on a VZW gnex and I went from stock, unrooted, locked, 4.1.1 to the OTA leaked 4.2.2 and my phone has been crazy ever since. My keyboard will go up and down and up and down randomly, my speakers won't work randomly, and my phone freezes up occasionally. Have you tried flashing the 4.1.1 radios back? So far I haven't went back to 4.1.1, because I don't want to wipe my phone.

grandzu said:
Are both the custom ROM and radio 4.2.2and for Toro?
Did you clean flash the ROM?
Did you restore apps via titanium?
Does the error happen is you don't have any apps installed?
Click to expand...
Click to collapse
The rom and radio was for the 4.2.2 and specifically for the Toro.
I did a clean flash, making sure everything was wiped and formatted before flashing any roms
I did not restore any apps via titanium as i just wanted to have a feel of the custom rom before adding any extra apps.
i believe it may just be the device's problem... i got a re-manufactured GNex from asurion since my original had a huge crack =(
Just to make sure if anything was wrong, i did a Nandroid back up from my original working gnex and transferred everything over to the new GNex asurion sent me. But nothing seemed to fix the problem

dkoon1987 said:
I am having intermittent issues where I can't hear anyone nor can I play back videos or music either. It sounds like our issues are similiar. I am on a VZW gnex and I went from stock, unrooted, locked, 4.1.1 to the OTA leaked 4.2.2 and my phone has been crazy ever since. My keyboard will go up and down and up and down randomly, my speakers won't work randomly, and my phone freezes up occasionally. Have you tried flashing the 4.1.1 radios back? So far I haven't went back to 4.1.1, because I don't want to wipe my phone.
Click to expand...
Click to collapse
I unlocked and rooted my phone first thing I got it from Asurion. When i had received the GNex, it was on 4.1.1 and i was able to make calls and everything was fine until I tried to flash 4.2.2 . I reflashed it back to stock settings of 4.1.1 and that should have fixed and flashed the 4.1.1 radio back. I even went to the length of making a Nandroid back up from my original cracked GNex and flash it over to the new device and that sure did not help the problem as well.
All in all, I called Asurion that my microphone is broken and expected to receive another device by Tuesday. I even asked if they can send me a brand new one since the refurbished was not working as "new". Hopefully I get a brand new one.
Even though I will be getting a new one, i was wondering why or how this could have happened. Software related or was it just the phone itself that just crapped on me

mrxtokki said:
I unlocked and rooted my phone first thing I got it from Asurion. When i had received the GNex, it was on 4.1.1 and i was able to make calls and everything was fine until I tried to flash 4.2.2 . I reflashed it back to stock settings of 4.1.1 and that should have fixed and flashed the 4.1.1 radio back. I even went to the length of making a Nandroid back up from my original cracked GNex and flash it over to the new device and that sure did not help the problem as well.
All in all, I called Asurion that my microphone is broken and expected to receive another device by Tuesday. I even asked if they can send me a brand new one since the refurbished was not working as "new". Hopefully I get a brand new one.
Even though I will be getting a new one, i was wondering why or how this could have happened. Software related or was it just the phone itself that just crapped on me
Click to expand...
Click to collapse
@mrxtokki - Well, in your case it sounds like you are fortunate and have insurance so you're getting a new device, or at least a replacement. However, in case you were wondering, I think I may have found the solution. It appears as though your phone might have a faulty headset jack which causes the speaker and earpiece not to work. There is an app in the PlayStore called SoundAbout, that can disable wiredheadset detection and keeps the phone strictly on speaker and earpiece. This fixed my problem. Here is the thread that I found the solution from:
Here is the thread:
https://community.verizonwireless.com/thread/786886
Hope this helps some other soul like me!

Microphone withouth speaker doesn't work. Help

Hi, my name is Daniel and I am in serious need of some help. I have a rooted T999 for T-Mobile. TWRP recover installed. I am running into some frankly strange issues. If I am in a call and I am not using the speaker, no one is able to hear me. If I am in a call, they can hear me but with occasional clicking sounds and very bad quality. I tried re installing the baseband but it does nothing. Can anyone help me please?
Baseband version: T999UVEMJC
Thank you!

What Rom and Kernel do you have ? If on Stock then can you do factory reset ?

I am running complete stock. The only thing I put was TWRP 2.6.3 I believe. I have factory reset a few times to no effect.

If you are not on Touchwiz Stock 4.3, then please switch the Baseband to LJC.

Will that solve the mic not working without speaker?

Yes I suspect it might.

Ok, I downloaded the correct basebadnd you told me and flashed it through TWRP. I booted and it showed no signal. Then I went into setting, networks, and mobile networks and it said please insert SIM card. I cleared cache and installed the old baseband and it works but in the same manner.

I don't think you mentioned your Current Rom. Please also provide Kernel.

I have taken a screens hot and attached it. Should help answer your question, I hope

Please if possible, try a AOSP Rom instead of Stock Touchwiz. At the least it will rule out hardware issues. If that's not an option, and SELinux is enforcing, I don't know if you can change.

Yeah, I tried a AOSP rom and no dice. I was looking online and saw that I am actually not the only one. Other people who took the 4.3 update seem to be having this issue.

The AOSP Rom took out the TW Rom as a culprit. If you still have an issue the probably a hardware issue.

Hey guys so I was looking and it turns out I'm more clueless than even I originally suspected. The ROM I originally flashed was based off of Touchwiz. What ROM should I be flashing because I cannot seem to find one that is aosp to the core?
The one I was going to try was Dirty Unicorn but I cannot tell if that even is what I should be trying.

Try Liquidsmooth, Pacman, SlimBean and so on. There are a number of quality Roms out there. I only suggested 3 that first popped into mind

Alright. I'll try those.