hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me
IT Would help if you Gave the Error Message # for Example If your Getting Error Message 240 It's a Connection Problem.
Try Turning of your Firewall, Have the Rom you are upgrading to in your Root Directory And Always Make sure your Phone is Super CID unlocked.
Hope This Helps.....I"ve been where you were at once... IT was the My Firewall for me.
Try flashing your Operator rom using the SD card method. Or looking at the Unbrick table done by POF. It's all in the WIKI...
halder said:
hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me
Click to expand...
Click to collapse
Try booting in debug mode (hold the Side OK button + power button and reset at the same time)
once you booted into that 4 colored screen with SPL/IPL listed, flash the device with HardSPL 0.7
Link Here
Then upgrade your device again.
using HardSPL it ensures your device will not be overwritten with bad blocks and it enables unsigned rom files to be written to the phone. it's a win-win if you upgrade it.
still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..
halder said:
still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..
Click to expand...
Click to collapse
This 262 Error Message I got this
""ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.""
At this Point I"m Stumpped I"m hoping one of the Big Boys Will Step in on this one and give you a better Solution....
yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work
halder said:
yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work
Click to expand...
Click to collapse
Wam7 has already given the best advice to start unbricking your phone.
1. Get the original Rom which came with your phone. It might be listed here http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades or here http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions. If it is not listed you'll need to search the internet and/or this forum.
2. When you have your original ROM, flash it to your phone from the SD card, not from your computer. Instructions to do this are here http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing. Remember to have a full battery charge before beginning.
Hopefully this will recover your phone. If it does, then make sure that you flash Olipro's HardSPL 2.10 (V7) to your phone http://forum.xda-developers.com/showthread.php?t=296722.
If you get stuck on how to do this correctly, there is some good advice in Mrvanx's upgrade guide http://forum.xda-developers.com/showthread.php?t=299462.
Also, in the future it can help others to help you if you give more information about your phone such as phone type, original ROM, current Rom, Radio version, SPL version etc, etc. Most people include some of this info in their signature so they don't have to keep re-typing it.
thank you very much for replaying...
i tried the sd card method and i download my exact cid rom but still it give the error 0068002 i download more than 5 original shiped rom same message
my phone is htc ...tytn ..not qtek or dopod ....
htc pure
info
r 1.18.00.10
g 32.55.7018.01h
d 3.57
m05 s04 b06
any other solution
i can go to boot menu
plz again
i tried evry possible way to flash my phone but i cannt get it done why??? EROOR 262
i download more than 10 official rom (htc) and i apply the exact sd method steps still it give me 0028002 error
my device is HTC ...BUT HTC WHAT I DONT KNOW...IT JUST HTC ONLY
SO I CANNOT CHOOS MY EXACT CID ROM
PLZ HELP ME OR I WILL THROUGH IT AWAY
plz answer me its very urgent?????
ok i dont want to open a new thread with same question.so if some one plz can help i will be graetful....
i want to knew how to fix error 262
Have you tired flashing from the bootloader?
Have you tired flashing just the rom from mitty ?
Is the phone unlocked? Have you thoroughly read the unbricking thread in the wiki?
WB
i dont know if its unlocked but i flash it with chap 3.7 a then i tried to flash it with chap 4.00 it reach 2% and stoped..ofcouse its unlocked..
it tried the mitty way but it give
level=ff instead of 0
and bad command
it tried the sd card method the error 0068002 or invalid vender id
If you get invalid vendor error doesn't that mean the phone is locked?
since no one helped me here in this thread ...i helped my self..
i found the solution...i send my ID to htc.com and they replay nicey and send me the link to my exact cid rom ..
the problem was my original rom was norway not wwe ..**** who thought that???
anyhow thank you for all who tried to help me..really i benfit from thier method for future desaster???
see u in another problem...
cuz we know nothing we just ask and ask until we find the solution ..
My O2 Xd Mini Got Stuck When I Tried To Upgrade The Rom Nd Now It Displayes Only As "rom " On The Top And Some "vs No 1.02" At The Bottom Plz Help Me What To Do ?
How Do I Upgrade Rom Now ?
How To Strt Bck My Phone ?
And When I Am Trying To Upgrade It Again I Am Getting Some Recovery Error Plz Help How To Do
I freezed at 75% for about 30mins and then I restarted it. The bootloader screen appeared and it said "Upgrade ROM code error Please try again".
What should I do??? THX!!!!!
kelvinka said:
I freezed at 75% for about 30mins and then I restarted it. The bootloader screen appeared and it said "Upgrade ROM code error Please try again".
What should I do??? THX!!!!!
Click to expand...
Click to collapse
what rom are you trying to install
...have you followed the info from the chef to install?
usally found in there 1st & 2nd posts
AT&T DIAMOND [US 3G Rom Base 1.93.422.4]
http://forum.xda-developers.com/showthread.php?t=439859
The normal precedures of flashing rom were followed
full battery?
try and flash again...your rom you have download could be corupt
download it again if it still sticks at the same spot....good luck
how can I flash rom without getting into WINDOWS???
Just staying at the bootloader screen...
ok try this
http://forum.xda-developers.com/showthread.php?t=440050&highlight=stuck+bootloader
hope this helps
good luck
problem solved!!!!
thanks for your help!!!
hope i help in some way
all the best and have a good weekend
Liam
Hi i am a newbee in this forum and i have trouble with my XDA star (nike), because it stucks in boot-mode and i can not get it alive....
Her is what i did:
- i installed the CleanBlack2ReloadedOffice in german on my XDA Star - it worked perfectly ...
- Today i wanted to upgrade the radio from Nike_Radio_1.58.16.27 to the better one Nike_Radio_1.58.21.23_25.65.30.04S_Modded.
Result: the flashing stopped with 99% an now i am stuck on this boot-screen and my phone is a brick :-( It says:
RUUNBH
NIKI300
SPL-1.16.0000
CPLD-4
I tried several things to get the phone alive - but nothing helped every trial failed with the grey screen and a 0% on it - some 5 Minutes later aborted with error.
I copied the sspl-1.16-nike.exe on the device and started the Update. It stuck on 99% - ended with an error.
But now i am not able to install hard spl or anything else? I allways get the 0%-Load-Screen on the device and after 10 Minutes an 262-Error.
I tried now to load every shipped original rom - but the Rainbow-Start-Screen does not go away. Is there any other chance to get this device again working? Did anyone made experiences with this strange behavior?
I really would be glad, if there is a "howto" get into a working communication process between my "Pc" and my phone? Is there hope to get this device running? Any helpfull advices? Thanks in advance
hi everyone, i have a problem here, i have one xperia play locked boot loader with cm10, but, i tried to install gapps jb, but when i do this, my xperia crash everytime, BUT, the question is, how can i flash a ftf ? i have tried with flashtool but i got this problem
29/041/2012 23:41:38 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
29/041/2012 23:41:38 - ERROR - Error flashing. Aborted
so, what should i do? i tried only flash system.sin, but that take a long time, and dont know what to do, please guys, help me to bring my xperia back to life
its a R800a guys
ps: i already flashed gapps jb, it crash on boot
any light?
caiorobsan said:
hi everyone, i have a problem here, i have one xperia play locked boot loader with cm10, but, i tried to install gapps jb, but when i do this, my xperia crash everytime, BUT, the question is, how can i flash a ftf ? i have tried with flashtool but i got this problem
29/041/2012 23:41:38 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
29/041/2012 23:41:38 - ERROR - Error flashing. Aborted
so, what should i do? i tried only flash system.sin, but that take a long time, and dont know what to do, please guys, help me to bring my xperia back to life
its a R800a guys
ps: i already flashed gapps jb, it crash on boot
any light?
Click to expand...
Click to collapse
....anyone?