I freezed at 75% for about 30mins and then I restarted it. The bootloader screen appeared and it said "Upgrade ROM code error Please try again".
What should I do??? THX!!!!!
kelvinka said:
I freezed at 75% for about 30mins and then I restarted it. The bootloader screen appeared and it said "Upgrade ROM code error Please try again".
What should I do??? THX!!!!!
Click to expand...
Click to collapse
what rom are you trying to install
...have you followed the info from the chef to install?
usally found in there 1st & 2nd posts
AT&T DIAMOND [US 3G Rom Base 1.93.422.4]
http://forum.xda-developers.com/showthread.php?t=439859
The normal precedures of flashing rom were followed
full battery?
try and flash again...your rom you have download could be corupt
download it again if it still sticks at the same spot....good luck
how can I flash rom without getting into WINDOWS???
Just staying at the bootloader screen...
ok try this
http://forum.xda-developers.com/showthread.php?t=440050&highlight=stuck+bootloader
hope this helps
good luck
problem solved!!!!
thanks for your help!!!
hope i help in some way
all the best and have a good weekend
Liam
Related
Hi all!
I have a big problem with my MDA Pro, so I'll apriciate all help that you can give me!
I tried to remove simlock and I flashed 0.00.00 Rom and everything went fine. But then, when I rebooted my device on boot screen I see "No GSM" and can't flash my radio rom again, it just says "Updating radio rom - please wait" and after some time it aborts flashing. Everything else is working fine, all other PDA functions, but my phone is dead... I had original T-Mobile rom instaled on my device and bootloader 1.01.
Plz help guys, don't know what to do!!
hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me
IT Would help if you Gave the Error Message # for Example If your Getting Error Message 240 It's a Connection Problem.
Try Turning of your Firewall, Have the Rom you are upgrading to in your Root Directory And Always Make sure your Phone is Super CID unlocked.
Hope This Helps.....I"ve been where you were at once... IT was the My Firewall for me.
Try flashing your Operator rom using the SD card method. Or looking at the Unbrick table done by POF. It's all in the WIKI...
halder said:
hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me
Click to expand...
Click to collapse
Try booting in debug mode (hold the Side OK button + power button and reset at the same time)
once you booted into that 4 colored screen with SPL/IPL listed, flash the device with HardSPL 0.7
Link Here
Then upgrade your device again.
using HardSPL it ensures your device will not be overwritten with bad blocks and it enables unsigned rom files to be written to the phone. it's a win-win if you upgrade it.
still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..
halder said:
still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..
Click to expand...
Click to collapse
This 262 Error Message I got this
""ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.""
At this Point I"m Stumpped I"m hoping one of the Big Boys Will Step in on this one and give you a better Solution....
yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work
halder said:
yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work
Click to expand...
Click to collapse
Wam7 has already given the best advice to start unbricking your phone.
1. Get the original Rom which came with your phone. It might be listed here http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades or here http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions. If it is not listed you'll need to search the internet and/or this forum.
2. When you have your original ROM, flash it to your phone from the SD card, not from your computer. Instructions to do this are here http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing. Remember to have a full battery charge before beginning.
Hopefully this will recover your phone. If it does, then make sure that you flash Olipro's HardSPL 2.10 (V7) to your phone http://forum.xda-developers.com/showthread.php?t=296722.
If you get stuck on how to do this correctly, there is some good advice in Mrvanx's upgrade guide http://forum.xda-developers.com/showthread.php?t=299462.
Also, in the future it can help others to help you if you give more information about your phone such as phone type, original ROM, current Rom, Radio version, SPL version etc, etc. Most people include some of this info in their signature so they don't have to keep re-typing it.
thank you very much for replaying...
i tried the sd card method and i download my exact cid rom but still it give the error 0068002 i download more than 5 original shiped rom same message
my phone is htc ...tytn ..not qtek or dopod ....
htc pure
info
r 1.18.00.10
g 32.55.7018.01h
d 3.57
m05 s04 b06
any other solution
i can go to boot menu
plz again
i tried evry possible way to flash my phone but i cannt get it done why??? EROOR 262
i download more than 10 official rom (htc) and i apply the exact sd method steps still it give me 0028002 error
my device is HTC ...BUT HTC WHAT I DONT KNOW...IT JUST HTC ONLY
SO I CANNOT CHOOS MY EXACT CID ROM
PLZ HELP ME OR I WILL THROUGH IT AWAY
plz answer me its very urgent?????
ok i dont want to open a new thread with same question.so if some one plz can help i will be graetful....
i want to knew how to fix error 262
Have you tired flashing from the bootloader?
Have you tired flashing just the rom from mitty ?
Is the phone unlocked? Have you thoroughly read the unbricking thread in the wiki?
WB
i dont know if its unlocked but i flash it with chap 3.7 a then i tried to flash it with chap 4.00 it reach 2% and stoped..ofcouse its unlocked..
it tried the mitty way but it give
level=ff instead of 0
and bad command
it tried the sd card method the error 0068002 or invalid vender id
If you get invalid vendor error doesn't that mean the phone is locked?
since no one helped me here in this thread ...i helped my self..
i found the solution...i send my ID to htc.com and they replay nicey and send me the link to my exact cid rom ..
the problem was my original rom was norway not wwe ..**** who thought that???
anyhow thank you for all who tried to help me..really i benfit from thier method for future desaster???
see u in another problem...
cuz we know nothing we just ask and ask until we find the solution ..
Ok so I got the phone few months back and it already had ViperX Rom installed. I didn't know much about rooting so this is my first go at it .
I got the Airplane Mode stuck on turning off problem with unknown IMEI and saw that installing stock RUU help some people so I tried that.
Tried a few times to no avail and tried installing CM Rom too but got stuck on boot screen .
The HTC RUU exe gets stuck on sending. I can't do anything with my phone now so please help.
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
chejetikoti said:
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
Click to expand...
Click to collapse
first full charge your phone,downlaod orignal stock rom, make you sure your mobile driver correctly installed in your pc,and then flash with sp flash tool. more for information try this procedure :
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ----------
chejetikoti said:
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
Click to expand...
Click to collapse
if you face connection problem with SP flash tools...then try this driver (install in your pc)
http://d-h.st/xkW
thank you.
007jigar said:
first full charge your phone,downlaod orignal stock rom, make you sure your mobile driver correctly installed in your pc,and then flash with sp flash tool. more for information try this procedure :
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ----------
if you face connection problem with SP flash tools...then try this driver (install in your pc)
http://d-h.st/xkW
Click to expand...
Click to collapse
thank you so much, now its working I tried with new driver, so its done
Now I am facing new problem, with my WCDMA only mode,.. after flashing if I select WCDMA only mode network getting disconnected and showing Cross mork on indicater, previously I used WCDMA only mode on same mobile with same sim, I am using aircel Karnataka , and I am staying in Bangalore.. ANY Solutions for it,..
chejetikoti said:
Now I am facing new problem, with my WCDMA only mode,.. after flashing if I select WCDMA only mode network getting disconnected and showing Cross mork on indicater, previously I used WCDMA only mode on same mobile with same sim, I am using aircel Karnataka , and I am staying in Bangalore.. ANY Solutions for it,..
Click to expand...
Click to collapse
if you using stock rom...then take hard reset your phone...reinsert your sim.
I did hard reset and removed and inserted sim again, but still I am facing same problem. every time when I do hard Reset My mobile IMEI Numbers are Going to INVALID... why?
ok so the main issue is the IMEI number....are you backup your IMEI number ? try this i think it's help you
http://forum.xda-developers.com/showthread.php?t=2380700
yeh i am doing this always when do hard reset
007jigar said:
ok so the main issue is the IMEI number....are you backup your IMEI number ? try this i think it's help you
http://forum.xda-developers.com/showthread.php?t=2380700
Click to expand...
Click to collapse
I am doing this every time,, but after that only I am getting the WCDMA only not working problem, if I select network ball will crossed, no network for it, I checked the same sim in other mobile its working properly
IMEI number successfully installed or not? check the stock rom properly downloaded on your pc or not? again flash the stock rom...Actually i am alos NEWBIE..and i faced some soft-break problem in canvas...but the problem successfully solved with to flash the stock rom...so try it
007jigar said:
IMEI number successfully installed or not? check the stock rom properly downloaded on your pc or not? again flash the stock rom...Actually i am alos NEWBIE..and i faced some soft-break problem in canvas...but the problem successfully solved with to flash the stock rom...so try it
Click to expand...
Click to collapse
IMEI NUMBERS installing is successful I will try again to flash my phone again may ne it will work properly
installation aborted status 7
Plzz help me out guyzzz I tried to install this rom but it was showing error as installation aborted status 7
Now my phone is stuck on the logo plzz help me wat to do
Micromax q334
I face same problem on my micromax q334 please send driver link for my phone urgent.
hey guys, newbie here, so sorry if there's another thread. Last night, my phone (20150907 version) entered boot loop out of its own accord. it keeps restarting but is always stuck on the elephone logo for some reason. I did not do anything to trigger this! I've tried flashing the ROM, but it won't work I have the drivers installed. I've tried entering recovery mode, but that won't work either. Anyone else had this + know what to do? I'm so sick of this phone not functioning properly. Thanks for any help
Are you "downloading" on spflashtool before connecting your phone to the computer?
stonedpsycho said:
Are you "downloading" on spflashtool before connecting your phone to the computer?
Click to expand...
Click to collapse
yep! spflashtool recognises my phone but is stuck on downloading DA
her0yne said:
yep! spflashtool recognises my phone but is stuck on downloading DA
Click to expand...
Click to collapse
I'm also having this problem, can you reply if you find a fix please
Might be worth removing dub drivers and starting again. Skeleton1911 posted a brilliant guide in this forum.
my p8000 is in same condition
hi
I am having the same problem here! after the new update the telephone got stuck on logo and doesn't go any further
Does anybody can help with easy follow steps ( totally dummy on these matters )
I didn't even try to install the newest update... it just got stuck on the elephone logo re-loading again and again until the battery dies. installed the drivers, tried flashing, no luck. re-installed the drivers, flashed with all possible stock ROMs. NOTHING works. I'm starting to hate this phone