My myTouch slide stopped loading the memory card and when I plug it into my computer it doesnt turn on USB Debugging, is there a fix for this?
And yes I did check the USB Debugging box.
Related
I've had a search for this and can't find it, so I'll risk the search police:
I enabled USB debugging so I could create a gold card.
I then wanted to resync with outlook before changing ROM.
I disabled USB debugging in settings>applications>development.
When I plug in the USB cable and select sync it turn on USB debugging.
I've turned the phone off and on, made sure debugging is not selected after this and still when I connect the USB cable and select htc sync it turns on USB Debug. I believe this is stopping me from syncing and frankly I'm getting pissed off now so I'm off to bed.
JAmes.
PS. I guess I should add that I had htc sync all working before.
Hey guys. I have been using cyangen RC rom and I have a problem. I use.my phone to tether. When I plug it in I get USB and USB debugger and tether works fine built in froyo. If I disconnected however and replug my USB in I do not get USB nor USB debugger to show up even if I go into the menu and try to turn them on myself. Because of this for some weirs reason the built in tether wont work unless both of these are on which forces me to reboot my phone everytime. Wtf is going on?
Hey guys.. so just now I was using my desktop computer and my phones internet connection via usb tethering.. but now with tethering turned off, my computer won't see my phone. Can't see the SD card, or in adb either.. what am I doing wrong?
Sent from my Snapped CM6 Evo
Reboot your computer and phone. That usually solves it for me.
I have USB debugging checked in Settings-->Applications-->Development. However, when I plug my phone into my computer via USB, it simply says "Charge Only. When I click the "Charge only" on the notification bar, my only options are: Charge only, HTC Sync, Disk drive, and Mobile Broadband Connect. What's the deal here? I have done USB debugging before....
If USB debugging is on under development settings it should automaticly start USB debugging when you insert a USB cord into both your computer and phone.
There is no menu in the sense nptification interface that has that option but i may be wrong. I haven't used sense since i got my phone.
Sent from my Incredible using Tapatalk
Hmm, then if I have USB Debugging checked, why doesn't it automatically go to USB Debugging when plugged in? Does it matter what ROM I have?
I dont believe your ROM matters but as linuxmotion said, once enable it should automatically turn on once you plug your usb in. It should be on whether you pick charge only or disk drive, etc.. without you having to do anything.
look for a notification about usb debugging when plug your usb in, you should see one if you enabled it in development.
I've had the LG G3 from T-mobile for more than a month now. It worked fine all along, until today I just noticed that when I connect the phone to my laptop via a USB cable it starts charging right away. There's no option that would allow me to view the internal storage as a drive in My Computer or connect it in MTP mode or something. Previously, it used to do this automatically, I mean the drive would appear automatically.
When I try to tether my phone's 4g connection to my laptop through the USB cable, it works. So, I'm guessing nothing's wrong with my USB port or cable. Please help me!