Why can`t I download doomlord`s wifi modules from his threads (v08)?
It`s saying I don`t have permissions to acces the page...
and i must post this here because i dont cant post in the Dev forum...
Please, i want to flash his kernel but i need also the modules!! (i downloaded the Doomkernel)
Here ya go
Looking for the Doom kernel wifi zip
Can't access the downloads for the wifi zip for the overclocked kernel on my x10 (i ran this x10_2.3.3_DooMKernel-v05.ftf ) and so far love the speed of the kernel but i need some wifi. Anyhelp as to where i can find it. Cheers
---------- Post added at 10:38 PM ---------- Previous post was at 10:20 PM ----------
Found the right zip, installed via Recovery, and still get error message when i try to turn on wifi. Any tips or tricks.
read doomlords signature
Sent from my Xperia Play using xda premium
Wifi modules not working
Hi, I am using the DoomKernel for my xperia play and I have tried 2 wifi modules from doomlord but none of them seems to work for me, I can activate wifi but not get the ip from my network, it has been working perfectly before. Anyone know what can be the problem?
Thanks
I'm in the same boat
since multi upload is down I googled the file names of the modules and found them on rapid share but I think I may have the wrong kernel also ( none of the kernel link work either ) could use some help with links to the cdma 2.0ghz kernel and the wifi modules for it.
I flashed a kernel that was labeled a doom lord cdma kernel v10 on rapid share and it says under kernel version [email protected] #2 so I'm figuring it some one else's kernel it only goes to 1.6 and wifi doesn't work , I'm assuming its probably a combo of wrong kernel and wrong modules.
help in need of a 2.3.4 R800i uk gsm rom please and will work on lockboot loader
help in need of a 2.3.4 R800i uk gsm rom please and will work on lockboot loader link or upload thanks in advance
lyricalchaos said:
help in need of a 2.3.4 R800i uk gsm rom please and will work on lockboot loader link or upload thanks in advance
Click to expand...
Click to collapse
Why don't u look. Xda.
Sent from my R800i using Tapatalk
Installing wifi module withour clockworkmod
Hi, i'm trying to install the doomkernel wifi modules using only adb commands but it's not always working. I don't want to use to use the update.zip clockworkmod method.
Here's what i did
1 .I remounted using adb remount command
2. Then i pushed each .ko file inside the update.zip to /system/lib/modules
I got it to work a few times but i mostly got an error when i turn on the wifi.
Any ideas how to make this work? or is this not possible?
thanks in advance.
androboid said:
Hi, i'm trying to install the doomkernel wifi modules using only adb commands but it's not always working. I don't want to use to use the update.zip clockworkmod method.
Here's what i did
1 .I remounted using adb remount command
2. Then i pushed each .ko file inside the update.zip to /system/lib/modules
I got it to work a few times but i mostly got an error when i turn on the wifi.
Any ideas how to make this work? or is this not possible?
thanks in advance.
Click to expand...
Click to collapse
Just out of curiosity, why not just use cwm?
You probably need to chmod to set the correct permissions but I'm not sure what the permissions are
Installing wifi module without clockworkmod
Thanks for hasty reply. I'm making some sort of a desktop installer so i'm trying to reduce user interaction as much as I can. If possible i want it to be automated without the user needing to go to cwm.
Any ideas?
Edit: I checked the permissions of the 4 .ko files in /system/lib/modules and they are 777. After seeing other files inside system, most have 644, i changed them to 644. It didn't work.
androboid said:
Thanks for hasty reply. I'm making some sort of a desktop installer so i'm trying to reduce user interaction as much as I can. If possible i want it to be automated without the user needing to go to cwm.
Any ideas?
Edit: I checked the permissions of the 4 .ko files in /system/lib/modules and they are 777. After seeing other files inside system, most have 644, i changed them to 644. It didn't work.
Click to expand...
Click to collapse
Try this:
Code:
adb remount
adb shell rmmod bcm4329.ko
adb push bcm4329.ko /system/lib/modules/
adb shell insmod /system/lib/modules/bcm4329.ko
That should load up the new wifi modules for you
i didn't see that file in the update.zip that i downloaded. I'm trying to look for that file in this forum now but all the links are dead since they banned most of the file hosting sites we use. I'll try that, and get back to you. Thanks man.
wifi...
Hi guys, I have a wifi problem here... On doom's dev thread for Xperia S, he provided 3 links for the wifi modules.zip, but I tried all of them and they don't work on my Xperia S, LT26_6.0.A.3.75_UK Generic on GB.
On the stock wifi module, it says Error when On, as stated in his thread
On the other 2 modules for Doom Kernels' , each time I try to power on the Wifi or Wifi teethering, the phone auto shuts down and restarts by itself :crying:
Any ideas?
cloudelamerz said:
Hi guys, I have a wifi problem here... On doom's dev thread for Xperia S, he provided 3 links for the wifi modules.zip, but I tried all of them and they don't work on my Xperia S, LT26_6.0.A.3.75_UK Generic on GB.
On the stock wifi module, it says Error when On, as stated in his thread
On the other 2 modules for Doom Kernels' , each time I try to power on the Wifi or Wifi teethering, the phone auto shuts down and restarts by itself :crying:
Any ideas?
Click to expand...
Click to collapse
wrong device. please post in your correct device section.
Sent from my R800i using Tapatalk 2
fma965 said:
wrong device. please post in your correct device section.
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
Opps sorry!
is there any Doomkernel version that works with cm9?
using the stock cm9 kernel, but cant undervolt my cpu... need to do it due to bad batterydrain.
lyricalchaos said:
help in need of a 2.3.4 R800i uk gsm rom please and will work on lockboot loader link or upload thanks in advance
Click to expand...
Click to collapse
Heres a link and I hope you know how to use flashtool otherwise like fma says you do a quick search through the xda forums.
http://www.xperiagamer.com/Stock-Roms/234-stock-firmware-for-flashtool.html
cloudelamerz said:
Opps sorry!
Click to expand...
Click to collapse
no problem , wasnt being nasty its just you should get better replies in your device section
Sent from my R800i using Tapatalk 2
fma965 said:
no problem , wasnt being nasty its just you should get better replies in your device section
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
Hey guys can someone help me. I don't wanna post a thread for a question like this, plus it's related.
So I successfully flashed Doomkernel V2 on my xperia play R800X, and then flashed the GB tweaked rom. No problems at all. But for some reason my wifi won't connect. It goes thru this never ending boot loop of obtaining IP, connecting, scanning etc. It's really odd. I've tried 2 wifi modules and the other one gives me an ERROR message on my wifi selection. Any suggestions?
Related
Right have lost track of what update is what I have 2.3.3 UK generic, rooted and bootloader unlocked with doomlords kernel think it was the first one. Have trawled the forums and not sure what the right way to update to 2.3.4 is, like I say I have confused myself
Can some one point me in the right direction please
Sent from my LT15i using Tapatalk
It's quite simple if you have an unlocked BL, and the ability to read - http://forum.xda-developers.com/forumdisplay.php?f=963
right so i have been away and done my reading lol
am i right in thinking i have to use flashtool to install the ftf file first then use fastboot to to install the img file from this post
http://forum.xda-developers.com/showthread.php?t=1269937
just checking as dont wont to bork my phone as need it for work in the morning.
or have i missed something
sorry if this seems a bit simple but i always feel it good to make sure first
rustynuts34 said:
right so i have been away and done my reading lol
am i right in thinking i have to use flashtool to install the ftf file first then use fastboot to to install the img file from this post
http://forum.xda-developers.com/showthread.php?t=1269937
)
Click to expand...
Click to collapse
All you need is the img, which is already rooted, the ftf is for those with a locked boot loader.
ok cool thanks thought i may need to do both as people were complaining of losing wifif, ok here goes then cheers for the help
rustynuts34 said:
ok cool thanks thought i may need to do both as people were complaining of losing wifif, ok here goes then cheers for the help
Click to expand...
Click to collapse
Might be an idea if you do have issues to flash the ftf and wipe user data, but I just flashed the image and haven't had any issues.
Had to do both in the end as WiFi didn't work, all good now though
Sent from my LT15i using Tapatalk
Nice one.
Sent from my LT15i using XDA App
Hi
.Img doesnt replace kernel thats why there is wifi issues
But if u flash .img then doomkernel after it,it will work has doomkernel supports 2.3.4, altho not fully yet.
Hope that helps
Sent from my LT15i using XDA Premium App
pushtostop said:
Hi
.Img doesnt replace kernel thats why there is wifi issues
But if u flash .img then doomkernel after it,it will work has doomkernel supports 2.3.4, altho not fully yet.
Hope that helps
It would have last night lol but never mind its sorted now thanks, but at least i know i can use doomkernel now
Click to expand...
Click to collapse
Ya doomkernel v10test works minus vibration / usb but multimount sd off market fixes usb and vibs not important and will be fixed in v11 I assume when sources are released
Sent from my LT15i using XDA Premium App
Is it possible to have Doomkernel with CM rom?
And is it normal on CM7.2 to show device name LT15i while I have LT18I?
Yes use DooMKernel for CM7.
And you could change your build.prop to look like LT18i.
Sent from my LT18i using xda premium
dp94 said:
Yes use DooMKernel for CM7.
And you could change your build.prop to look like LT18i.
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Ohh. But how do I do that? Do I need to flash Doomkernel first and then CM7 or Doomkernel and then CM7? Would appreciate a little step by step guide.
I tried both options, and in first I got bootloops and in second my touchscreen wasnt responsive at all.
And how do I edit build.prop?
Sorry for so many question at same time.
You should read one of the many tutorial here on xda, the reason why you got a boot loop is probably because you didn't wipe data, cache and dalvik.
To edit you build.prop, you need root access and a root explorer. Once you got that, you go to /system and you edit the build.prop file.
laual said:
You should read one of the many tutorial here on xda, the reason why you got a boot loop is probably because you didn't wipe data, cache and dalvik.
To edit you build.prop, you need root access and a root explorer. Once you got that, you go to /system and you edit the build.prop file.
Click to expand...
Click to collapse
But now when I find build.prob with my root explorer and edit it with text editor, it lets me save it, but when I reopen, nothing changes. [I got root acces]
NVM. Solved that too. Thanks for answers
EDIT2: Ok, Kernel problem ain't solved. Which one should I flash http://forum.xda-developers.com/showthread.php?t=1303635 or http://forum.xda-developers.com/showthread.php?t=1172885
Since the for CM7 is for FXP046/7, and I have FX103.
The first link.
It doesn't matter.
Afaik that was a major release after FXP044/045 (correct me if I'm wrong), but either way it should work for newer FXP versions too.
Sent from my LT18i using xda premium
i think you should just use kernel provided from the zip file,while waiting for doom making new version of his doomkernel for cm7,,
rashid.fairus said:
i think you should just use kernel provided from the zip file,while waiting for doom making new version of his doomkernel for cm7,,
Click to expand...
Click to collapse
DooMKernel is also working for newer release.
Now tested on FXP050 & FXP103 and there are no problems!
dp94 said:
DooMKernel is also working for newer release.
Now tested on FXP050 & FXP103 and there are no problems!
Click to expand...
Click to collapse
i wish to use cm9 + doomkernel touch edition,it would be great
Sent from my LT15i using Tapatalk
Hi all,
I've uploaded this root method because it is the only way I have been able to get root on the first try every time.
Your results may vary. If you don't get it first try, just try again.
Here are the methods I have tried and had fail:
UnlockRoot
Doomlord v1
Doomlord v4
TPSparky
SuperOneClick (Any Version)
So here you go! Here is a method that I have had 100% success with. I will be editing the script to try and make it more clean and less work on your part in the future. I will post new versions on this thread when I get them done.
Required Downloads
LG Nitro HD Root.zip
Enabling Root Rights
Enable USB Debugging and Unknown Sources.
Unzip the zip file to the location of your choice.
Run the file named “Root.bat”.
Follow the instructions on in the CMD window.
Notes
Here is a list of the apps that I have found will brick your Nitro if removed:
AT&T Address Book
AT&T Navigator
Google Play Books*
Google Play Movies*
Google Play Music
Google Play Store/Market
removal of at&t addressbook and navigator doesn't brick your device !
i confirm this !
aaki_rocker said:
removal of at&t addressbook and navigator doesn't brick your device !
i confirm this !
Click to expand...
Click to collapse
Thank you for your input. But, I have removed both of them individually and bricked it. Also, several others have reported in other threads that it has. I believe it just depends on how much luck you have.
Just tried... no worky.
Again, I am trying to root on 2.3.5. Zerg fails, SOC wont make it past rebooting adb...
mattman86 said:
Thank you for your input. But, I have removed both of them individually and bricked it. Also, several others have reported in other threads that it has. I believe it just depends on how much luck you have.
Click to expand...
Click to collapse
Matt your instructions for root say to extract from zip, root.bat. But your link takes me to a apk root file not a zip file...
can you be more specific or maybe the link is misdirected?
are you saying this is a root method via apk from phone?
IM starting to remember why I sold my g2x....nothing changes eh LG??
freakboy13 said:
Matt your instructions for root say to extract from zip, root.bat. But your link takes me to a apk root file not a zip file...
can you be more specific or maybe the link is misdirected?
are you saying this is a root method via apk from phone?
IM starting to remember why I sold my g2x....nothing changes eh LG??
Click to expand...
Click to collapse
yes i try this and i fail to download.. the zip file..
zikario507 said:
yes i try this and i fail to download.. the zip file..
Click to expand...
Click to collapse
Hic hic,me too
Sent from my LG-P930 using xda app-developers app
I assumed he meant to download and run on the computer with phone connected through USB. Can you clarify mattman86?
Sent from my LG-P930 using xda app-developers app
AllstarE4 said:
I assumed he meant to download and run on the computer with phone connected through USB. Can you clarify mattman86?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
But as to what? Run the apk on your pc o_0
His directions say dl zip, yet there is no zip it directs you to a page that looks like what may have been in the zip? Still not clear
The apk root ...it shows up on the phone but still unclear.
Need the link fixed or to be clarified please Mattman when you get a chance thank you.
Edit: is the zip you were refering to the lg tool that reverts you to v18f ?
If so will this work on official ics release via lg tool.
Thanks again in advance
Sent from my LG-P930 using Tapatalk 2
Terribly sorry... The privacy settings on my Google Drive must have been reset somehow.
I've fixed it so that the zip should show now.
But it now says that you have binned the file. It works right, doesn't it?
Mattman your script isnt working.
When I hit "any key to continue" it flashes..but its not flashing anything.
Cmd window turns off (checked process not running at all)
nothing happens.
No instructions , nothing. cmd. window just exits.
so guesse thats another brick wall for root on lg updated firmware to ics.
Mattman sorry but this method does not work.
Or I should say it did not work for me.
I even put togewther my own rendition of your files that you compiled still would not work.
In fact I am now convinced the ONLy root method for the nitro running it the one here:
http://forum.xda-developers.com/showthread.php?p=30209937#post30209937
Im not saying anything against your method, it looks solid, but it would not work.
I tried it on v20c and v18f.
I now have root but want to say your efforts and work are appreciated.
I hope this is not considering hijacking the thread I wanted to post this for others with the same issues.
EDIT: Mattman I been searching through the threads and seen that you initialy used this method off of 2.3.6? Meaning you rooted from 2.3.6? ( from the cwm thread you came up with a way via script to run cwm) I am wondering maybe your method only works from 2.3.6? what firmware did you originally root from?
i tried this method on my v20c and my wife is not working.. and never get root??
please help me
zikario507 said:
i tried this method on my v20c and my wife is not working.. and never get root??
please help me
Click to expand...
Click to collapse
V20c is the latest update... Please read the title of the thread.
mattman86 said:
V20c is the latest update... Please read the title of the thread.
Click to expand...
Click to collapse
yes.. i'm agree with you.. nowadays i can root with your eady guide to unbrick the phone
Does this work for anyone who has followed his steps and also 'not' on the latest firmware like Mat mentions, just want to know before I get my phone??
i'm glad for using this markphyton ROM http://forum.xda-developers.com/showthread.php?t=1790615
but the root is not working, it says some issues and bla bla bla
please help me to fix this root
i follow the instruction for "Install Xperia_Root_Fix.zip", but i can't find where i can download that "Xperia_Root_Fix.zip" ?
by the way im sorry for my bad english
thanks before :laugh:
Just use Lupus kernel and you wont need any SU fix
Sent from my R800i using Tapatalk 2
bhavei said:
Just use Lupus kernel and you wont need any SU fix
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
What version of Lupus kernel will working the root?
i'm using Lupus v5,but its not working
Same behavior here
bestahore said:
What version of Lupus kernel will working the root?
i'm using Lupus v5,but its not working
Click to expand...
Click to collapse
I've Lupus v5 too, I've tried to download Xperia root fix on the web but all links are dead because of copyright problems. And of course, I've problem with sudo su command...
At least I've succeed in giving rights to Titanium backup but at each time an other program ask for admin rights it fails so I don't really know where the problem is coming from. Maybe it come from the lacks of space in internal memory because the Markphyton's rom fills very well it ; I don't know...
If someone have found a solution...
But I just have seen Markphyton is working on a last version so maybe we must just wait for it and the problem will be gone.
fxjohn said:
I've Lupus v5 too, I've tried to download Xperia root fix on the web but all links are dead because of copyright problems. And of course, I've problem with sudo su command...
At least I've succeed in giving rights to Titanium backup but at each time an other program ask for admin rights it fails so I don't really know where the problem is coming from. Maybe it come from the lacks of space in internal memory because the Markphyton's rom fills very well it ; I don't know...
If someone have found a solution...
But I just have seen Markphyton is working on a last version so maybe we must just wait for it and the problem will be gone.
Click to expand...
Click to collapse
have you tried a SU update?
got problem on it?
after update, the root is working or not?
Hello,
I did something very wrong, I tried to change my kernel from Lupus to DoomKernel and picked the wrong one, the Xperia ARC one instead of Xperia Play (v22 instead of v14).
I now have a half-dead phone, stuck with a blank screen at boot, no recovery, no fastboot (fastboot keeps waiting for the device).
The only thing I can do is opening it through ADB shell and see the filesystem. It at least partially seems ok, since I managed to uname the phone and see my kernel version.
I saw matt4321's thread and thought it could help me to flash a new recovery:
http://forum.xda-developers.com/showthread.php?p=25052229
But unfortunatly, the linked online recovery build tool always *crashes* before getting the job done:
http://builder.clockworkmod.com/
repo sync failed.
Build step 'Execute shell' marked build as failure
Archiving artifacts
Finished: FAILURE
Click to expand...
Click to collapse
My question is: can anyone help me to get a working (and ADB flashable) ClockWorkMod "recovery.img" file in order to mend my phone please ? Any working link would be greatly appreciated !
And please forgive my bad english (be assured I do my best to be understandable !).
Regards
lincruste said:
Hello,
I did something very wrong, I tried to change my kernel from Lupus to DoomKernel and picked the wrong one, the Xperia ARC one instead of Xperia Play (v22 instead of v14).
I now have a half-dead phone, stuck with a blank screen at boot, no recovery, no fastboot (fastboot keeps waiting for the device).
The only thing I can do is opening it through ADB shell and see the filesystem. It at least partially seems ok, since I managed to uname the phone and see my kernel version.
I saw matt4321's thread and thought it could help me to flash a new recovery:
http://forum.xda-developers.com/showthread.php?p=25052229
But unfortunatly, the linked online recovery build tool always *crashes* before getting the job done:
http://builder.clockworkmod.com/
My question is: can anyone help me to get a working (and ADB flashable) ClockWorkMod "recovery.img" file in order to mend my phone please ? Any working link would be greatly appreciated !
And please forgive my bad english (be assured I do my best to be understandable !).
Regards
Click to expand...
Click to collapse
Can you enter flash mode? Hold back while plugging usb. If flashtool report that you are in flash mode then just flash stock firmware (ftf) file. That should fix all errors
Bakisha said:
Can you enter flash mode? Hold back while plugging usb. If flashtool report that you are in flash mode then just flash stock firmware (ftf) file. That should fix all errors
Click to expand...
Click to collapse
Thanks for your very fast answer. I'm now downloading Flash Tool on SonyMobile website. Will I loose my root access if it ever works ?
lincruste said:
Thanks for your very fast answer. I'm now downloading Flash Tool on SonyMobile website. Will I loose my root access if it ever works ?
Click to expand...
Click to collapse
That will also work (at least at part to flash stock firmware)
But i mean flashtool from http://flashtool.net
But please, while you are downloading it, read sticky threads in general and q&a section.
Sent from my R800i using xda app-developers app
Bakisha said:
That will also work (at least at part to flash stock firmware)
But i mean flashtool from http://flashtool.net
But please, while you are downloading it, read sticky threads in general and q&a section.
Click to expand...
Click to collapse
Thank you again for the link. I see that Sony flash tool is now called Emma, so it's dead end here.
Bakisha said:
But please, while you are downloading it, read sticky threads in general and q&a section.
Click to expand...
Click to collapse
Sorry about that, I did not mean to be an ass.
lincruste said:
Thank you again for the link. I see that Sony flash tool is now called Emma, so it's dead end here.
Sorry about that, I did not mean to be an ass.
Click to expand...
Click to collapse
Emma is used to flash stock firmware on Xperia phones with unlocked bootloader, it is not dead end.
With Flashtool is just much easier
Edit: no need to apologize, we were all noobs at the begining
Sent from my R800i using xda app-developers app
Bakisha said:
Emma is used to flash stock firmware on Xperia phones with unlocked bootloader, it is not dead end.
With Flashtool is just much easier
Edit: no need to apologize, we were all noobs at the begining
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
It's alive !
Many, many thanks.
Best regards