Develop Bugs

Car Dock doesn't Launch Car Mode

From what I understand, the dock is supposed to Launch the Car Dock screen... Mine doesn't... It charges... I haven't tested Audio yet... But doesn't launch...
Any suggestions?
I'm gonna try my wife's fone (bone stock) tonight and see if it's something I did to my fone that's inhibiting this function
-Casey

I'm having the same problem. I installed the StartTalking app, and it has its own car mode, so that may be the problem.

I had that same problem.
I had gotten a replacement Atrix, and when I tried using it in the car dock, it wouldn't launch unless you first put the phone in the dock, then turned the car on, then unlocked the screen, and even then it would take a few seconds to recognize it. The original phone would just launch automatically no matter if there was power or not.
Both phones had fresh 1.2.6 SBF flashed, it may be a hardware problem.

Mine has never given me any issue. I love using it! Just wish there was a case that the dock would accept!

Okay... so.. tried the wife's unmolested fone, and same thing... I wonder if the 1.57 patch has something to do with it?..
Might have to shoot moto a complaint...

I found an app in the market which was simply a short cut that you could program for your car mode app. You could also use Any Cut or Launcher Pro to do a shortcut. But I agree. It's annoying.
I use another car app and just launch it manually.

Strange. I'm on 1.5.7, rooted, with GingerBlur and my car dock works fine.
Sent from my MB860 using XDA Premium App

Wonder if I've got a bunk dock... 2 phones and neither workin' makes my left eyebrow raise a little... Gonna try w/ one more fone on saturday hopefully and try and figure out wtf is goin' on
I don't wanna hit a button... That's part of the awesomeness of the dock... Not working as designed = not as cool... =\

It's probably your dock. I got one that wasn't working correctly. I exchanged the dock, and the new on is working fine.

I have the same problem, but I don't have a solution yet. I have the home dock and car dock and was running a stock 4.1.8.3. Everything was great until I decided to root. I read that I could not root with 4.1.8.3 so I flashed 4.1.2.6. and I was able to root, but I lost my home and car dock auto launch when I put them into the docks. I upgraded OTA 4.1.5.7 and no fix. I flashed 4.1.5.7 and no fix. I can use Any Cut to run the programs, but that is only good for those without the docks. I tried running the Dock Settings for the audio settings, but I get an error that reads "Dock not found". The phone charges in the docks, but does not recognize that its in a dock. Can anyone help? Thanks in advance.

tpthatsme said:
I have the same problem, but I don't have a solution yet. I have the home dock and car dock and was running a stock 4.1.8.3. Everything was great until I decided to root. I read that I could not root with 4.1.8.3 so I flashed 4.1.2.6. and I was able to root, but I lost my home and car dock auto launch when I put them into the docks. I upgraded OTA 4.1.5.7 and no fix. I flashed 4.1.5.7 and no fix. I can use Any Cut to run the programs, but that is only good for those without the docks. I tried running the Dock Settings for the audio settings, but I get an error that reads "Dock not found". The phone charges in the docks, but does not recognize that its in a dock. Can anyone help? Thanks in advance.
Click to expand...
Click to collapse
Reflash with 4183.
Sent from my MB860 using Tapatalk

That did the trick! Thanks for all the help!
Sent from my MB860 using XDA App

I think people are describing two problems. One was due to the firmware, the other is due to faulty hardware.
I had a faulty standard dock that wouldn't cause an auto-switch on the phone. I replaced it and that one was fine. I suspect that was what at least one poster had with their car dock.
These docks work in USB host mode (which is why the docks can't then be linked through to a PC for syncing). So there is actually electronics in there rather than just a USB pass through.

[Q] 2012 Honda Civic USB doesn't work with Evo 4G

A friend of mine also tried plugging in his HTC G2 (with Cyanogenmod), which also did not work. And I've been looking for a solution all around the place, and it seems to be a problem with Android phones in general; however, I know it's possible to get it working somehow because not everyone has the issue.
Basically, no matter if I have the USB connected via charge only or mass storage, the car display flashes "UNSUPPORTED". I've tried it with and without USB debugging enabled. And with all those combinations, I've tried having a music application open/no music apps running.
I also tried a solution here, which also did not do anything different.
I've also seen a few responses saying to just use Bluetooth instead. My car does not have Bluetooth capabilities. Using an AUX cable is a possibility, though I'd rather have the USB working.
Thanks!

Seems like the system wants to recognize your phone, but USB mode takes a few seconds to enable and therefore the system just rejects it. Disk mode will DEFINITELY have to be activated at some point, but the question is when. Try these steps:
1. With the car on, turn on the radio but don't have it in USB mode yet. Use radio, aux, cd, whatever. This will likely power the USB port at least.
2. Plug in your phone, make sure to select disk/mass storage mode.
3. Wait like 10-15 seconds for it to settle in, THEN select USB mode.
If that doesn't work, try different combinations. Like start with the radio completely off or something. If you have more than one USB port, try a different one. Other than that... I'm stumped. I got it working in a rental Ford Fiesta, but I don't remember the exact method. But it was something like this.

Try the radio with a USB stick drive to see if the radio even works that way
Sent From My Pocket

Sorry thegregbradley, I tried it but it didn't work.
I tried doing a couple of different things similar to that too, and it didn't work either.
As far as using a regular USB drive with some music files on it, it works fine! My friend used her iPod and that worked fine too. I don't see why it has such a problem with Android though...

In doing some reading, I have discovered information that says you need to turn USB debugging OFF for this to work...
Info comes from this thread:
http://www.hondacivicforum.com/foru...nics-10/2012-usb-android-support-88695/page2/
If not that, then I wonder if it's a problem of file management on your SD card? Just as a test, try putting your songs directly in your root folder. Or at most, one folder deep. The Fiesta I rented had bluetooth functionality, so I ended up doing it that way, as it was faster and less problematic. But I definitely would rather just plug it in if it just worked that way.

Iv found that running a rooted rom with debugging off and in mounted mode works great in my car.... No other combo has worked for me

@pwncloud, did you ever get this to work with USB debugging off? Just curious

I have debugging off in my car too and no mods to my android, it's a G2 and I get the same error on my 2012 Civic LX.

To update, no I never got it to work. I've settled with an aux cable.

E4GT and a usb car stereo... help plz

Hey guys... just picked up my E4GT and I have a USB car stereo. The stereo currently gives me a "device error" when I plug the phone in because the phone is not in "storage" mode.
My question is... how can I have the phone default to "usb storage" mode when I plug it into something, so that the stereo can find music on it?
Thanks.

u can either pull down the notifi ation bar and press the mount usb button or u can go to the market and grab an app called multi mount sd-card and it will auto mount it for u every time u plug it back in to the stereo.
Sent from my SPH-D710 using xda premium

Thanks for the tip. For some reason, though, when I plug it into the stereo it doesn't let me change to mass storage by pulling down the notification screen. I tried changing settings, but it didn't have any effect.
I tried multi-mount free version and it didn't seem to do anything at all. I'm kind of skeptical about picking up the paid version since the free version didn't work at all.

been gone for a while. did u ever get that fixed? because i fugured out extra info tonight actually. ive got 2 cables that fit this phone, one will let me switch to mass storage on my radio and one wont. also the best place to have your music is not in what i thought was my sdcard but move your music folder to sdcard/external_sd/ and your head unit will read it way way faster. as for those cables i seem to think some usb cables are charge, data, or charge/data only. just my thought though. hope u get straightened out.

the automount widget by JRT studios, in the market works perfect imo (NOT DUAL USB MOUNT)

ion dk20 dock vs jelly bean

I was wondering if any of you have the same problem as me.
Just bought the dk20 ion dock and pluged my ion jelly bean to it and:
- first nothing happens wen pluging it in, if mouse and power cord connected it charges and cursor appears.
- doesnt autodetect dock
- hdmi (for me most important) does not work..
- pendrives and/or flashdrives are detected ok
so the dock is as for now a nice charger and that is about it!
let me know if any of you are having the same issues, and lets see if wll together we can do something about it.

I have had zero issues with mine. USB capability seems to be hit and miss. My cheap mouse and old Logitech keyboard work fine. I could not get a Logitech k400 to work though. As for getting hdmi to work make sure the cord is plugged in and tv on. Device screen should be off while plugging it in. Once in turn on, unlock, and it should show up. Then you can pull the notifications down and hit tv launcher. You can also set it with smart connect to auto launch.

zackspeed said:
I have had zero issues with mine. USB capability seems to be hit and miss. My cheap mouse and old Logitech keyboard work fine. I could not get a Logitech k400 to work though. As for getting hdmi to work make sure the cord is plugged in and tv on. Device screen should be off while plugging it in. Once in turn on, unlock, and it should show up. Then you can pull the notifications down and hit tv launcher. You can also set it with smart connect to auto launch.
Click to expand...
Click to collapse
Are you using Jelly Bean on your Ion as me?
I have followed your steps and nothing, pluged the HDMI cable into the dock and turned the TV on with the HDMI 1 channel on, with phone screen off connected it (with only the HDMI cable plugged in) and nothing happens. If I use Smart Connect App, when choosing dock it does detect the dock, but the TV mode does absolutely nothing.
Im beggining to think it could be the HDMI port on my Dock that doesn't work properly, I did buy it on ebay.. so you never know!
Let me know what you think, the whole idea was using my Ion as an additional basic PC, but without hdmi it's not going to be to useful..

Yes I am running the Rogers jelly Bean. It is very easy to disturb the hdmi connection when you mess with the dock. I am using a hdmi to micro hdmi adapter. I plug my phone in then hit the power button and unlock it. It then recognizes and shows on the tv. If you pull down the notifications you have options for tv launcher and also hdmi settings.
One thing you can try is connect the hdmi to your device directly and see if it works.

zackspeed said:
Yes I am running the Rogers jelly Bean. It is very easy to disturb the hdmi connection when you mess with the dock. I am using a hdmi to micro hdmi adapter. I plug my phone in then hit the power button and unlock it. It then recognizes and shows on the tv. If you pull down the notifications you have options for tv launcher and also hdmi settings.
One thing you can try is connect the hdmi to your device directly and see if it works.
Click to expand...
Click to collapse
I think it's the HDMI port on my dock then, because it just doesn't even notice the HDMI connection, I'm using the cable that came with the phone, I have a factory unlocked lt28h Ion that came with all the extras, hdmi micro to hdmi cable and smart tags..
I may try doing a downgrade to see if it works ok on the ICS, I have read it had less problems with that version of Android.
Once again thanks ever so much for your help and interested, ill keep the post updated just in case other people are having the same problem as me.
Pd: The HDMI port on my device works fine directly to TV, the only thing is I have to adjust the screen dimensions to 95% now I'm on Jelly Bean so the picture is ok on the TV.
Regards, judgefargo

Finally the new Dock arrived yesterday and guess what.. It works like a charm!!!
So in the end the problem was a faulty HDMI port, the seller was kind enough to send a new one for free.
Thank you all for your help, as compensation ill leave a few discoveries I have made so you can use your ion as a spare PC.
For ROOTED devices i strongly recommend Screen Standby App, that lets you turn the screen of whilst the phone is docket and uses 1/3 of the battery, as well as not bothering you whilst watching a film or other tasks.. it has many other functions to.
Another great app is Paragon, which lets you connect external usb and hard drives in any format, specially NTFS, please note that for usb and hard drives to work the power cord has to be connected, due to the drain of power, as device warns.
That's it for now, hope this info is useful for other Dock owners and users!

Awesome I will try this out. Glad you got a good dock to work with. If you come up with other interesting stuff let us know.

judgefargo said:
Finally the new Dock arrived yesterday and guess what.. It works like a charm!!!
So in the end the problem was a faulty HDMI port, the seller was kind enough to send a new one for free.
Thank you all for your help, as compensation ill leave a few discoveries I have made so you can use your ion as a spare PC.
For ROOTED devices i strongly recommend Screen Standby App, that lets you turn the screen of whilst the phone is docket and uses 1/3 of the battery, as well as not bothering you whilst watching a film or other tasks.. it has many other functions to.
Another great app is Paragon, which lets you connect external usb and hard drives in any format, specially NTFS, please note that for usb and hard drives to work the power cord has to be connected, due to the drain of power, as device warns.
That's it for now, hope this info is useful for other Dock owners and users!
Click to expand...
Click to collapse
I also got the Sony Xperia ion SmartDock DK20,no problem here connecting to tv while charging and connect mouse and keyboard...well,it can connect with an external hard disk?I didn't know that
Can give me more deep tutorial?My External HDD is WD version
Sent from my LT28h using xda premium

UchihaDareNial said:
I also got the Sony Xperia ion SmartDock DK20,no problem here connecting to tv while charging and connect mouse and keyboard...well,it can connect with an external hard disk?I didn't know that
Can give me more deep tutorial?My External HDD is WD version
Sent from my LT28h using xda premium
Click to expand...
Click to collapse
I have not tried a drive yet but it will work. Think it has to be formatted in fat and not ntfs.

zackspeed said:
I have not tried a drive yet but it will work. Think it has to be formatted in fat and not ntfs.
Click to expand...
Click to collapse
Any different between fat and ntfs?
XDAプレミアムを使用 して私のLT28hから送ら れてきた

UchihaDareNial said:
Any different between fat and ntfs?
XDAプレミアムを使用 して私のLT28hから送ら れてきた
Click to expand...
Click to collapse
NTFS is standard format for Windows and for it to work in Android it needs to be fat32 format. Don't think there is much of a difference other than just the type of format. So you would right click your drive you want to use and format it as fat32. Then put what you want to on it and plug it into the dock. The phone should be able to see it at that point but you will need a file browser to access the drive. I will try it in a bit to confirm it works but from what I have read on the Z forum it should work fine.

zackspeed said:
NTFS is standard format for Windows and for it to work in Android it needs to be fat32 format. Don't think there is much of a difference other than just the type of format. So you would right click your drive you want to use and format it as fat32. Then put what you want to on it and plug it into the dock. The phone should be able to see it at that point but you will need a file browser to access the drive. I will try it in a bit to confirm it works but from what I have read on the Z forum it should work fine.
Click to expand...
Click to collapse
Can I change the format without literally format my ext HDD?
XDAプレミアムを使 用して私のSK17iのか ら送られてきた

No. You will have to backup or move what is on the drive and do a format. Formatting wipes the drive and no way around that I know of.

The problem is Android is not programmed to read NTFS format which is a windows format.
But if you install PARAGON app it makes the OS able to read NTFS drives without having to format your hard drive to fat32.
I also have a WD 500GB Hard Drive and faced the same problem, there is other programs but paragon seems to be the one that works best.
Hope that helps, regards and good fortune!

Carperformance.se Uconnect Android system help.

I am hoping I can find some help in here with a couple problems I am running into on this system that would make it so much better to me.
The system is basically an Android box utilizing the touch screen and monitor of my Uconnect 8.4 head unit. The naming in the settings is rk3188 and is running on KitKat 4.4.4, so it is some variant of the Android TV boxes. If there are other specs or info that are needed to help in possibly fixing my issues please let me know.
Issue 1: although not major, there is no option to have OK Google from any screen. Having this option for a car system is obviously something helpful. In the settings of the Google App trying to access the menu for OK Google detection doesn't work, so I can't even get to the screen where that option lives. I have the most up to date version of Google App and Google Play Services. I have Google searched on ways to fix this but nothing has brought that ability up. I know Android version 4.4.4 was capable of this. There was another app that utilized Googles voice engine and allowed this function but Google made him stop using their servers and killed that as an option.
Issue 2: this is the biggest bother to me and I could not find anything even related to what's happening in my searches. The system comes loaded with some apps and using Launcher3 for its front end, it has big buttons but offers almost no ability to customize it. The bottom row has apps that you cannot switch out to anything else, and 3 of them I will never be using. The system works but is not as nice as it could look or function. The obvious answer is to use a different launcher which is where the problem arises. I have tried to use Nova and Apex so far with the same very frustrating outcome. After the install everything is great, I can set the screen up to look amazing and add icons and functionality that really make it a great experience. So everything is working lovely then I shut my truck off and go do whatever. The next time I come back I start the truck up everything loads fine, the new launcher and everything I did to it is working just as expected until about 5 minutes in the screen goes black for a second and then the system goes through a factory reset. Really? Are you kidding me? The first couple times I thought maybe I hit something because I hadn't fully put my truck back together but after playing with it more and having the system factory reset 5 other times I have concluded it is related to changing the launcher. I tried Nova first, then I tried Apex with the same outcome and same sequence of events. Obviously it's annoying everytime testing this because updating and reentering my info everytime just to try the launcher again is time consuming. The last test the only thing I did was a different launcher so that has to be it, but why and how can I fix it?
If anyone has any clue how using a different launcher would cause a factory reset to happen please help me out. Or if there is anything I can do to this system to prevent that. My last resort thought would be to root it but I read someone else who has this system that rooting it caused screen layout issues and made things go 90 degrees off? The loaded apps in the system have touch screen calibration and screen resizing which might be necessary for this to function with the monitor.
Thanks for any help.

I spoke with someone else that has the system and they are not having any issues with running a different launcher so something happen to my particular device. I contacted the company and they will be getting me the firmware to refresh it and hopefully that fixes the resetting issue.

i am looking to get this also. I am very curious how you like the device - it looks great though a bit out of date. Waze & email should work well. How much storage does it have? Can you add a sd card or something?

RichTJ99 said:
i am looking to get this also. I am very curious how you like the device - it looks great though a bit out of date. Waze & email should work well. How much storage does it have? Can you add a sd card or something?
Click to expand...
Click to collapse
I'm getting a new unit sent out, it seems there are 2 versions and for whatever reason mine wouldn't let me customize the launcher.
But even though it's outdated, every app I tried worked just fine, they still install the latest versions. The system has 8gb of on board storage and a microSD card slot that is mainly for loading maps for offline navigation. I think you can still access it for other uses, but they have a better option for that. There is a USB input for flash drives or external drives. I tried my 2TB external drive on it and it accessed my movies fine from it.

How did you get it installed? Who?

got any pics?

Actually I would be interested in this too, I have an Alfa Romeo and the Uconnect 6.5 (european version) which isn't that great, it would be nice to attach a sort of box with ARM hardware running on Android and using the display and touch of the existing Uconnect. The question is, how this can be done?

http://www.dodgedurango.net/forums/.../24632-android-phone-uconnect-8-4-screen.html
I would check out this thread. It has two videos that walk you through the entire process - great info!

I also bought this latest Android system V4 2 weeks ago. Auto launcher pro app is very good working. At the moment there is a issue with the system time, which is not correctly synchronized with gps time. Carperformance Team is working on a fix for that. How can I get root Access for this Android 7 System?

Diabollon said:
I also bought this latest Android system V4 2 weeks ago. Auto launcher pro app is very good working. At the moment there is a issue with the system time, which is not correctly synchronized with gps time. Carperformance Team is working on a fix for that. How can I get root Access for this Android 7 System?
Click to expand...
Click to collapse
glad to hear i'm not going crazy with the clock but there is an issue.
I just bought and installed a V4 a couple weeks back too.
i must have left a loose connection cause i keep having to recall the touchscreen for android. I half-arsed the install cause we were leaving for a 2k mile roadtrip the next day- need to take it apart and do it right. Luckily you can connect a usb mouse in to trigger the calibration app.
id also love root- at the moment im trying to figure out if the one usb port is safe to connect an A to A usb cable into to get ADB. apparently on some versions of nvida sheild, you can. If they provide a firmware update for the clock fix then maybe that gets us an image to futz with for root.
a keyboard also works in teh usb port and i've tried a handful of key combos during boot to get to recovery but haven't stumbled on it yet.
I'll post back if i find anything

michaelk said:
glad to hear i'm not going crazy with the clock but there is an issue.
I just bought and installed a V4 a couple weeks back too.
i must have left a loose connection cause i keep having to recall the touchscreen for android. I half-arsed the install cause we were leaving for a 2k mile roadtrip the next day- need to take it apart and do it right. Luckily you can connect a usb mouse in to trigger the calibration app.
id also love root- at the moment im trying to figure out if the one usb port is safe to connect an A to A usb cable into to get ADB. apparently on some versions of nvida sheild, you can. If they provide a firmware update for the clock fix then maybe that gets us an image to futz with for root.
a keyboard also works in teh usb port and i've tried a handful of key combos during boot to get to recovery but haven't stumbled on it yet.
I'll post back if i find anything
Click to expand...
Click to collapse
Hi @michaelk
Good to hear that I am not alone here with this special system V4. Except for the issue with the system time and no root access, I am fully satisfied so far. I hope to fix it soon. If we had root access then we could solve this issue with the system time with some time apps ourselves.
Thank you for your experiences.
Best regards
Diabollon

wiring harness investigation
so played around some today.
I've got an issue where I need to recalibrate the screen almost every time I boot. it seems the box (or card added to the radio?) forgets things and only works the bottom right corner and also seems to rotate 90 degrees at boot. The end result is unusable screen. I think carperformance is just a reseller because of their response. They're friendly and reply quickly but are really unable to help. The first answer was just randomly fiddle with screen and try to find calibrate setting and reboot- that proved impossible and on my own I discovered a 6 dollar USB mouse from the Walmart could be used to navigate to the calibrate app. When I inquired again when it got more frequent they basically said it's not normal and offered no help except to adjust a personalization setting to run calibrate on boot- that only works once that I can figure (might be related to weird time bug)- so I settled on having tasker run calibrate on each boot. I wonder if there is a battery in the box that needs changing but the warranty sticker keeps me out for not- might add an external battery to keep it alive for a longer time to minimize the rebooting
Anyway took everything apart today to double-check and can't find any connection issues. I traced the harness a bit to try and understand a little and basically, the skinny cables run the daughterboard to snag the screen output and the touchscreen input. But i wanted to figure out what is tapped from the radio harness to the large white plug on the box and see if anything going on their .
DISCLAIMER- I NEED TO CONFIRM (it was hot - laughing) but basically seems what is tapped in radio harness is:
1) power and ground also
2) L&R aux audio signal- interesting here is they tapped a single ground (physically next to the right signal) for common. Earlier i had the RAX hack and their harness used a ground for each L&R and their aux input worked all the time without the little plugin shunt thing to trick aux input. When i dug some more and found a pin diagram from mopar I found that the 'left' ground is actually labeled "aux audio device detect signal" I need to play some more to see what happens but my guess is if we put a switch on that to short it to ground then the aux would just work to avoid the hokey plug.
3) Here's the fun- holding the screen to flip inputs could be the daughterboard running things. BUT since it also reacts to the left steering wheel button pack and switches inputs itself when you need the reverse cam- i figured it reads the can bus. and sure enough, it looks like it taps CAN IHS (+) and CAN IHS (-). Very cool that it would get into the whole bus and read anything- BUT since there are other FCA vehicles that don't auto-switch inputs on revers and they have alternate connections it seems the real dev is not involved to update things to sniff for other reverse signals. Reading around here- seems that there is probably a custom serial port someplace in the box that reads this and there's probably no documentation for us to do anything ourselves. But one can hope...
---------- Post added at 06:12 PM ---------- Previous post was at 06:07 PM ----------
michaelk said:
glad to hear i'm not going crazy with the clock but there is an issue.
I just bought and installed a V4 a couple weeks back too.
i must have left a loose connection cause i keep having to recall the touchscreen for android. I half-arsed the install cause we were leaving for a 2k mile roadtrip the next day- need to take it apart and do it right. Luckily you can connect a usb mouse in to trigger the calibration app.
id also love root- at the moment im trying to figure out if the one usb port is safe to connect an A to A usb cable into to get ADB. apparently on some versions of nvida sheild, you can. If they provide a firmware update for the clock fix then maybe that gets us an image to futz with for root.
a keyboard also works in teh usb port and i've tried a handful of key combos during boot to get to recovery but haven't stumbled on it yet.
I'll post back if i find anything
Click to expand...
Click to collapse
So the spec for the chipset for the V4 says it can handle an OTG port and a couple (maybe 3?) other USB ports. Obviously, the box only has the one USB A port visible on the pigtail. I wish we could get in the box and look for a header for the OTG port to help rooting but.... the darn warranty sticker.
on the FCA/Dodge side of things- I have a Durango with a USB port and SD card reader in the dash (USB Media "Hub" Apparently, FCA uses USB Mini B connectors to interconnect all the ports and the radio. They use latching connectors that are keyed but if you undo them there's a standard USB mini B in there. They do some odd male/female things so you have to pay attention to where you undo cables, but bottom line you can undo the connector on the back of the dash's USB port and stuff a USB mini B female on it and connect it to whatever host device you want.
I first tried an old laptop in case there's anything weird going on. My Dash "Hub" actually has 2 mini-B connectors and a multipin auto harness. Without the harness when you connect it to windows it sees a USB Hub, but the USB port was still dead. So I assumed it needs power from the harness on the back of the dash hub and connected that. UP popped up a USB mass storage device which I believe is the SD card reader- didn't get around to confirming and then the USB port also comes to life. Knowing that it was safe at that point I connected it to the USB A Host port on the box and presto chango now I have the in-dash port connected to the android tv box without any exposed wiring.
Connected the "android auto dongle" through the cars USB port and that works perfectly. I ordered a used 2 USB dash hub from eBay (later model years have 2 and will see what that does. The pictures of that also show the 2 mini B ports- I'll play some more when I get that. I'm not sure what is in those dongles but from the other folks hacking android auto into older models (by using newer radios) apparently, one port works for android auto and the other doesn't. The scuttle is its a body module programming thing but I wonder if maybe there's something physical in there and so the dongle won't be necessary any longer with the new hub? My other thought is if the two USB min B jacks allow you to connect to 2 different hosts- I would try one on the original Uconnect (in case I ever need to update the software) and the other for the android TV box.
So apparently the android tv box handles hubs just fine. As I mentioned earlier it handles a mouse or USB keyboard fine. Also, I played around and connected my hotspot by USB instead of wifi so the device sees it as a modem and that works just fine- so I assume a USB modem works out of the box too. (again odd if that works that carperformance sells a hotspot and not USB modem- like they don't know what the box can do)

I disassembled my display 2 times until it worked. After the first start, I had a black screen. I thought that was it... After 3 times it finally worked. I also had a cable on the plug which has easily resolved. I think you will also have a loose contact somewhere. One time I also had the display calibration gone. Then I connected my old usb keyboard and could then start the display calibration. I reset the system before. So far, the system works without problems. I also have a passive 4-way usb hub to connect.
I have already connected cables for the frontcam but have not yet moved into the engine compartment.
In the video tutorial of Carperformance, you can see when you switch to drive, the display then changes to the frontcam or signal from the cam, but the display does not change to the Frontcam signal with me.
Do you have with you the signal on the display of the camera when switching to drive?

Adw2 = bad mix
Went back and forth many times in email and turns out my calibration issue was probably all ADW2 launcher, guess it conflicts with whatever app they use to communicate with the display.
in the process of troubleshooting I got the update zip for the current version but I don't think those have recovery partition in there and so can't help root? I need to read some more.
I've ripped everything apart like 12 times with the screen, so that my front cam is not connected right now. For the brief time I had it, it was connected to one of the smaller video in pin connectors and don't think it worked in drive by itself, but can't really say for certain. I think certain models can't get the canbus command to see reverse and if I understand they connect in to the video in on the main connector and then use a point on the car that is energized to trigger the switch on that connection. If your adventurous they seem to have to flip a dip also. I think it's the Cherokees or maybe grand Cherokee so maybe Google their thread's? This site gives connector pin outs
http://connectors.dcctools.com/home.htm
There might be a lead for the drive on your shifter if lucky. I think I read the reverse shoulder comes from a body control box in the passenger wheel well?
Also they're super friendly and never wrong when you email but they can be brief. So you could ask if there's a dipswitch to flip to enable auto switching one of the inputs. Hec maybe we should just ask for a table of where the dips do...
(Sorry for any typos... Will try to edit later)

Supposedly it is enough to connect the extra input cable for DVD or CMMB. That answered me Carperformance. Before, I had no external input cable connected. That's why no signal came. The OEM rearcam works flawlessly.

Also, I forgot, they have a workaround for the clock bug
For the clock there is a fix
https://www.youtube.com/watchv=3OEEbah53QY&t=1s

michaelk said:
Also, I forgot, they have a workaround for the clock bug
For the clock there is a fix
https://www.youtube.com/watchv=3OEEbah53QY&t=1s
Click to expand...
Click to collapse
Unfortunately it's not available.

Diabollon said:
Unfortunately it's not available.
Click to expand...
Click to collapse
try this-
https://www.youtube.com/watch?v=3OEEbah53QY&t=1s

michaelk said:
try this-
https://www.youtube.com/watch?v=3OEEbah53QY&t=1s
Click to expand...
Click to collapse
It's a cheaper fix but so no solution. Carperformance should offer a software update with root access. Then we would be satisfied. We should expect it for the money.
My frontcam is working now good.
You already tried Android auto? Which USB dongle do you use? Do you need a special app for this?
My China usb dongle does not want to connect properly with my oneplus 6T.
Edit:
Android auto is working with Pumpkin USB dongle and autoplaybox app. The noname China scrap goes back to shop.
The time fix is working until now also. Thanks for this info. The carperformance, they wrote or informed the affected people who ordered it. I did not get any info.

Diabollon said:
...
My frontcam is working now good.
...
Click to expand...
Click to collapse
besides powering your camera and connecting the yellow RCA video signal did you have to do anything else?
something with the red signal wire maybe?
I cant consistently get a signal on my front cam and not sure if the camera is bad or my setup
---------- Post added at 12:55 PM ---------- Previous post was at 12:42 PM ----------
few other notes for others-
FCA "aux audio device detect signal" harness line is actually normally closed (I think shorted to ground)- if you break the connection the oew radio flips right to aux in. make the connection again and it flips back to previous input.
the in dash usb port is infact a powered hub. I originally had a usb + SD card combo and replaced it with 2 usb port and works fine. FCA uses mini b connections to it- just use a usb a to mini b cable to connect it to the android auto box and your indash usb port(s) will work on android auto (And provide more watts to charge your stuff). oddly either dahs hub has a second usb mini b connector that i played around with a little but never could figure out what it does
more can bus fun! - i updated the dongle firmware on the android auto dongle sold direct from carperforance and now it has a beta feature to map buttons. somehow it seems to be sniffing the canbus through the android tv box. it has arrow keys, numbers, enter, etc and you use the app to select the input to assign then you press the same button on the car twice- it sniffs the signal and assignes it. I My durango has the button packs on the steering wheel and i was able to assign up, down, left, right and get it to have the android auto respond. Need to play more but i think it actually goes android wide. For example i think the down button on my steering wheel was sending page down to the chrome browser i had open on the box. Pretty cool stuff if they expand that.