Related
This kernel is a new one with the recovery STEAM insteaod of the normal one, it support a lot of options, take a look
to use it:
apply extract the zip and apply the tar in odin as pda or also extract the tar and apply the zimage as kernel with heimdall
NOTE this is for the 2 froyo roms i know
EDIT:
V2
This is the v2 version, not many changes but from the SpeedMod Kernel by hardcore i used:
* Optimized compiler flags: -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp -fno-gcse -fprefetch-loop-arrays --param l2-cache-size=512 --param l1-cache-size=64 --param simultaneous-prefetches=6 --param prefetch-latency=400 --param l1-cache-line-size=64
Also there are some memory twaks from that thread, i got 334 of total RAM, please check your SGS before flahsing because by mistake i didnt and now im not sure if it did any change
CHECK camera/vide/radio/tv/games
PD i added ext4 and JFS, but i did not tested them
No go and thank him an zstupy for this great work
Probando...
luismanson said:
This kernel is a new one with the recovery STEAM insteaod of the normal one, it support a lot of options, take a look
to use it:
apply extract the zip and apply the tar in odin as pda or also extract the tar and apply the zimage as kernel with heimdall
Click to expand...
Click to collapse
Is it a fully working Steam??? I will surely try if it is.
i tryed some options and it worked, testing is welcome
Does it replace the CWM? Does it have all the basic CWM functions working? To go back, can we just flash another kernel with CWM or we need to flash a whole ROM?
I guess if you have a 'what's working' list & a 'to-do' list, we can start testing it.
Hello Luis, i put your Kernel in my SGS and now it dont show my IMEI.
I`m using Froyo JPD...
EDIT: Well... I done one Factory Reset and now IMEI turn show again...
What improviment i got with your Kernel? Have BLN?
Cya.
Guto ViP said:
Hello Luis, i put your Kernel in my SGS and now it dont show my IMEI.
I`m using Froyo JPD...
EDIT: Well... I done one Factory Reset and now IMEI turn show again...
What improviment i got with your Kernel? Have BLN?
Cya.
Click to expand...
Click to collapse
i didn't try yet, but it a good thing u to list the improvements done from the stock one.
it should give u more visibility!!
Guto ViP said:
Hello Luis, i put your Kernel in my SGS and now it dont show my IMEI.
I`m using Froyo JPD...
EDIT: Well... I done one Factory Reset and now IMEI turn show again...
What improviment i got with your Kernel? Have BLN?
Cya.
Click to expand...
Click to collapse
Seriously forget about BLN & other petty stuff. Go ahead and make a working STEAM KERNEL..
PS : This is some real good work.
PS2 : You need to put a BOUNTY on it.
PS3: checkout & rename your [ALPHA] to a version # looks good on the Title.
im not doing a lot of improvements, im working on some ideas on the work other ppl does for the other SGSs versions and thinks i would like, like this steam kernel
it is my V3 base kernel, it has tinyRCU, ondemand scheduler and BFQ sched
there is NO BLN because it caused problems with a2dp audio
Will keep a watch on this thread.
great man..lot's of options in steam menu...
some explanation about that? can u provide or give a link about lots of options we have now?
can i put everything in ext2????
everuthing ok unti now
ragin said:
Seriously forget about BLN & other petty stuff. Go ahead and make a working STEAM KERNEL..
PS : This is some real good work.
PS2 : You need to put a BOUNTY on it.
PS3: checkout & rename your [ALPHA] to a version # looks good on the Title.
Click to expand...
Click to collapse
Here we go again.. Please create your own message board where you can edit every topic title to whatever you like!
Ps1: and please stop the non value added replies you're posting all over this board.
Ps2: my apologize for this non value added reply. I'm just trying to make a statement
i wont put a bounty on work that anyone can do, but i really do need money and dont mind on people donating money
i will keep working on steam, but im so short of time that i can not test everything, thats why its alpha, at least on the B version
jersr said:
Here we go again.. Please create your own message board where you can edit every topic title to whatever you like!
Ps1: and please stop the non value added replies you're posting all over this board.
Ps2: my apologize for this non value added reply. I'm just trying to make a statement
Click to expand...
Click to collapse
<----- looks at his thanks meter & smiles,
Can we make the conversion to ext 2, 3 or 4 with this Steam Kernel?
And, it's too complicated to have some overclocking room on near future with this kernel? Like something to make easy to overclock with Set CPU and some setcpu.txt files?
Thanks, Luis! You're one of the most active developers to I9000B and we all should be completely thankful to you!
Keep with the good work! Congrats!
Ok. Running on JFS and everything seems to be ok and pretty fast till now. About 1500 on Quadrant and, just to mention, I've made a full conversion without backup. Wiped out everything to be sure if anything goes wrong it's not caused by apps and past configurations. Missed the ext4 conversion to test. Not tested ext2.
Sent from my GT-I9000B using Tapatalk
Hello Luis, I put your Kernel inside ffabio Froyo light... I change all to JFS, but for now my Titanium Backup doesnt work, i got only FC...
Can be JFS?
Tnx and good work!
Thread's dead?
Oh well...
I'm still running everything on JFS and it's pretty fast and smooth, without bugs as I could see. But after some research found that it could be interesting to put /cache and/or /system to ext2. Anyone already tried this? It really should make some difference?
Thanks! And c'mon! Wake up, people! This is one of the best kernels we have to our i9000B! Let's give some feedback!
ClowReed said:
Thread's dead?
Oh well...
I'm still running everything on JFS and it's pretty fast and smooth, without bugs as I could see. But after some research found that it could be interesting to put /cache and/or /system to ext2. Anyone already tried this? It really should make some difference?
Thanks! And c'mon! Wake up, people! This is one of the best kernels we have to our i9000B! Let's give some feedback!
Click to expand...
Click to collapse
You don't face the time-reset issue at restart?
ragin said:
You don't face the time-reset issue at restart?
Click to expand...
Click to collapse
Nope! But as I said, I've done a full conversion (everything on jfs) and wiped out everything via secret code and via recovery menu, just to be sure it's all clean.
Sent from my GT-I9000B using Tapatalk
What Cy4noobsMod-7.1.3.1 really is? It is Cyanogen for Noobs Mod based on CM7.1 RC3.0 for gio. Yes like its name, it designed for easy and very user friendly purpose. The basic idea I build the latest CM7.1 RC.3.0 ported by phiexz (as I think it's already final or likely will be no more update) and compiled it with the all good things here covered almost all the potentially frustrating common issues to make it as stable as it can be for daily uses basis. I do some few mods but may slightly unnoticeable. It is not a custom-rom. I didn’t change the interface and such. I just want to keep it as original as the origin. The most noticeable thing I did may just enabled bootsound. The rest are minor (but of course important!). OK, let put it simply now all you have to do Just Flash and Play*.
*still there is a pre-condition and some optional follow up action below
Here some features Cy4noobsMod-7.1.3.1 offers:
• Latest port CM7.1 RC.3.0 with the all working features (credit to phiexz & squadzone)
• preinstalled gapps (credit to Msiiek)
• avoid false reformatting sd-ext by cwm-recovery issue when flashing (credit to waqasshahzad1986)
• enabled bootsound (customizable ready)
• fix split screen issue
• S2E ready (no need to mod or reformatting sd-ext partition again)
• avoid potentially market causes reboot issue
• avoid potentially installing application causes reboot issue
• use market 2.3.6 as a default (but still updateable and offer you more optional action)
• fix some other minor common issues
• just flash & play
• noobs, start your 'en-gio-ne'! and say "eat my dust" to your old migraine!!
Click to expand...
Click to collapse
HOW TO INSTALL
WARNING: Dragons Ahead!
But don’t worry the dragon has been tamed. Even dragon is still a dragon, so still don’t be careless & follow the instruction carefully.
First, make sure the pre-conditions fulfilled:
• have any GB 2.3.3 or upper on your device (or any CM7 rom).
• Already made sd-ext partition on your sd-card (and make sure don’t ever let cwm-recovery touch it reformatting again!), recommended use ext4, more over if want to activated S2E (optional). Don't know how to create partition? Go to mr.waqasshahzad1986 section first, believe me he is your best guide here.
• Have cwm-recovery 5.x (recommended px-cwm or px-cwm-v2). You don't have any yet? Please visit mr.phiexz for CM-7.1 RC-3.0 & cwm 5.x section where this rom originally ported.
• Downloaded Cy4noobsMod-7.1.3.1 zip file copied onto your sd card.
Click to expand...
Click to collapse
Download Cy4noobsMod-7.1.3.1 here:
Cy4noobsMod-7.1.3.1.zip
Installation:
• Just Flash & Play!* via cwm-recovery 5.x (press & hold Home+Power button to enter recovery mode)
*no need to wipe or mount anything, install zip from sdcard > choose zip from sd card > CyanoobsMod-7.1.3.1.zip > Yes-Install
• And you just officially 'noobed'! (I mean you already have Cy4noobsMod-7.1.3.1 on your device).
*always recalibrate your battery after flashing any rom!!
Click to expand...
Click to collapse
easy right?
Optional follow up action:
1. Market
If you want to keep market 2.3.6 as your market and don’t want to get any updated, open terminal emulator (pre-installed with your CM7) and type this:
su
pm disable com.android.vending.updater
Click to expand...
Click to collapse
that will disabled your market updater, but you still can enable it anytime if you decided want to get updated. just change the “disable” type to “enable” with the rest script are still the same.
recommended!! do this as soon as possible after flashed before you got updated automatically. if you already updated just uninstall the new market at "setting>applications>manage applications" and hurry type the script or you can activate flight mode so you will not get updated.
You can ignore all the things from the beginning if you want your market soon get updated (you will get your market updated automatically as long as your internet keep active)
2. Activated S2E (sd-ext ext4 needed!)
• Download S2E from market
• Open it and open its menu, setting, checklist all.
• Buffer size value better leave it as default (there is a chance S2E would repel the partition if set more than 256KB)
• Back, open menu again, choose reboot (usually it won’t reboot at your first time, so you may reboot it manually).
• after reboot open S2E again and checklist all (recommended leave the "application data" still uncheck, but you may check it if you want ap2sd extreme activated).
• open menu, choose reboot again (at this time it should be worked).
• and yes now you have your CM7 with S2E activated.
Click to expand...
Click to collapse
You can ignore all the things if you want try any other app2sd like link2sd (even I think it ported optimized with S2E).
Click to expand...
Click to collapse
Issues:
• There’s a known bug on gio that it can’t be helped. Cwm-recovery have a habit to reformatting your sd-ext, but it does not format the card correctly on gio. It may not harm if you not using any app to sd-ext things (S2E/link2sd/ app2sd/… or etc), but it does if you do. That’s why I warn you to avoid cwm-recovery ever touching your sd-ext (ex:wipe/format/restore/...etc). Just format your sd-ext partition into ext4 only using your computer. If you want to do any recovery backup-restore things better use any other apps, like Titanium Backup maybe (sorry it may just my limitation, hope the other dev here can help us there).
Click to expand...
Click to collapse
Notes:
• As it actually designed for noobs, please be wise to use it as it be. Please, don’t try to do silly things to your rom. Don’t try improvised things that some thing to do with your rom like modding or added tweaks. It may ruined your rom (conflict tweaks caution) and please don’t blame me for that. Customize it will be very welcome as long as not touch that area.
• Sure advance users will always have privileges to do sort things (with notes they knew well the risks. sorry noobs, i'm not being double standard here. i'm a noob too anyway). Feel free to have a try my rom for test its stability sir… your reviews would be really very very appreciated.
• Please ignore some grammar error as long as you can understand me.
Click to expand...
Click to collapse
CREDITS
Thx to:
• phiexz accompany with squadzone, who ported this great rom and let us have a great experiences too with it.
• Msiiek (I got inspired from your work sir)
• waqasshashzad1986 (you will be always be my mentor with all your guides and knowledge shares)
• Maclaw & Delanoister (you guys always motivated me with all of your works...)
• And of course all the members here that I may forgot to mentioned one by one
Last but not least... If this work pleased you, don’t shy to hit thanks button. Regards!
added some SS:
explanation (left to right)
1. the version (i use S5660DXKT4 GB 2.3.6 as my baseband)
2. quadrant score: 2037 clocked at min:247 max:787 gov: ondemand
3. quadrant score: 2562 clocked at min:247 max:902 gov: ondemand
4. memory status
5. S2E
6. How the sd-ext mounted look like on Titanium Backup
don't be fooled by its name guys... it noobs by the installation difficulty level...
but it have CM7 fullest potential...
and the most important thing is its stability!!
please have a try and experience it yourself...
(Please take a note: all devices clock stability are vary, please be wise with it!)
-RESERVED-
very nice .if i'm running into problems again with CM 7.2 , this will be the first thing i will try., ty for your work
Hello! First: thank´s for the work!!!! Another thing: i have the Giopro v1.4 on my phone. Can "update" direct with this rom? And the GPS? Work's nice?
nice job bro
thanks for your hardwork
sure don't need partition ext4 again?
okay I'll try
thanks for your work
djph4ntom said:
very nice .if i'm running into problems again with CM 7.2 , this will be the first thing i will try., ty for your work
Click to expand...
Click to collapse
yes, actually that's one of my goal too sir doing this project. i want to made a safety checkpoint for CM7.
that's why i'm using the latest CM7.1 RC-3.0, as long as we can see it look like will be no more any development (already fixed).
currently i'm testing CM7.2 too (build by Mclaw+del-kernell)...
ur welcom...
kompressorgpl said:
Hello! First: thank´s for the work!!!! Another thing: i have the Giopro v1.4 on my phone. Can "update" direct with this rom? And the GPS? Work's nice?
Click to expand...
Click to collapse
ur welcome...
as long as it is GB 2.3.3 & upper based, you already have fulfilled one of the pre-condition sir... yes just do it directly no need to wipe or mount anything... Just Flash & Play!
as for the gps issue you can read the issues section up there...
AskBack said:
nice job bro
thanks for your hardwork
Click to expand...
Click to collapse
u'r welcome bro...
ddiel said:
sure don't need partition ext4 again?
okay I'll try
thanks for your work
Click to expand...
Click to collapse
yup, just do it once only on your computer before flashing it
please take a note don't do wipe or mount anything on cwm-recovery, bcoz it potentially ruined ur partition... so do it just like the motto:
Just Flash & Play!
please try it and ur welcom bro...
einsal said:
please take a note don't do wipe or mount anything on cwm-recovery, bcoz it potentially ruined ur partition...
Click to expand...
Click to collapse
So CWM is basically useless? Doesn't this means we can't do back up/restore?
Wabot said:
So CWM is basically useless? Doesn't this means we can't do back up/restore?
Click to expand...
Click to collapse
You're right after backup it will format ext anyways so all this rom is useless untill new cwm because you still need to use card reader but maybe you can restore from cwm excluding ext partition I dont know anyways I use titanium to backup ext ofcourse maybe Im wrong?
Sent from my GT-S5660 using Tapatalk
Wabot said:
So CWM is basically useless? Doesn't this means we can't do back up/restore?
Click to expand...
Click to collapse
kajjtan said:
You're right after backup it will format ext anyways so all this rom is useless untill new cwm because you still need to use card reader but maybe you can restore from cwm excluding ext partition I dont know anyways I use titanium to backup ext ofcourse maybe Im wrong?
Sent from my GT-S5660 using Tapatalk
Click to expand...
Click to collapse
much n less...
but not really that useless too... it still plays an important role... actually we can still do backup even some wipe action as long nothing to do to our sd-ext... (i just being cautious)... yes just like kajjtan said...
S2e cant read my ext4 , how ??
Im sure i have ext4 , cos minitool says so !
shuegig said:
S2e cant read my ext4 , how ??
Im sure i have ext4 , cos minitool says so !
Click to expand...
Click to collapse
hm... did you do all the step right?
pre-condition > create ext4 (cluster size 4kb) partition first on your computer
installation > flash the rom with cwm with no wipe & mount??
if there still a problem try to re-do the step...
einsal said:
hm... did you do all the step right?
pre-condition > create ext4 (cluster size 4kb) partition first on your computer
installation > flash the rom with cwm with no wipe & mount??
if there still a problem try to re-do the step...
Click to expand...
Click to collapse
Yes I did.. maybe I shall try tomorrow ..
Sent from the GUN in my pants
shuegig said:
Yes I did.. maybe I shall try tomorrow ..
Sent from the GUN in my pants
Click to expand...
Click to collapse
Flash kernel and it will see your partition it helped to me
Sent from my GT-S5660 using Tapatalk
guys i learned & did some little test about gps setting n tweaks... my self conclusion about it gps is very so depend on location (ex:like the country where we live)... it's hard to generalized the issue... some specific setting/tweak can be optimized on some specific location, but can ruined on the other specific location...
so far i have no problem with the current gps, so i just leave it as it is (with the thoughts it's the best default setting)... i won't counted it as an issue as long there is no report so far...
kajjtan said:
Flash kernel and it will see your partition it helped to me
Sent from my GT-S5660 using Tapatalk
Click to expand...
Click to collapse
hm... so there is "an issue"...
anw thx mate for the solution!!
einsal said:
hm... so there is "an issue"...
anw thx mate for the solution!!
Click to expand...
Click to collapse
Yeah I was stuck on this activating S2E few days ago free space was showing my ext but S2E not so I have formated my card about 6 times on cwm on windows on linux even on some other software but no luck so I remembered waqas1986(cant spell his nick to hard remember) words to falsh new kernel so all.credits goes to him.
Sent from my GT-S5660 using Tapatalk
kajjtan said:
Yeah I was stuck on this activating S2E few days ago free space was showing my ext but S2E not so I have formated my card about 6 times on cwm on windows on linux even on some other software but no luck so I remembered waqas1986(cant spell his nick to hard remember) words to falsh new kernel so all.credits goes to him.
Sent from my GT-S5660 using Tapatalk
Click to expand...
Click to collapse
Delans kernal?
Sent from the GUN in my pants
yeah guys... actually there is "an issue"... not with the rom but the s2e itself... (sorry, actually i'm new too to this s2e things)
sometimes there is a chance s2e repel the partition if the buffer size value set default changed... so better just leave it as default... i''ll edited the s2e activation step...
oh yeah u can try some custom kernel from Delanoister, use the kernel for CM-7.1...
EDIT* After trying for so much on learning how to deodex a rom I finally found the way to do it. I take NO credit for what I'm going to post. i Found this tutorial browsing and searching online for a while and thanks to WANAM for telling me he uses dsinxda to deodex his roms. and DSIXDA for making the tool. Im just going to post the steps I did in order to get my stock rom deodexed. If I make a mistake or use wrong any term please forgive me I'm learning as you are. I just want to help you guys to be able to deodex your rom. I'M NOT GOING TO POST DOWNLOAD LINKS, JUST THE THREADS WHERE YOU NEED TO GO AND DOWNLOAD EVERYTHING FOR YOURSELF. (This to avoid issues with OP of other threads)
DOWNLOAD YOUR STOCK ROM IN A FORMAT TO BE FLASHED BY ODIN. GO TO http://sammobile.com and download your rom. After you have it REMOVE the .md5 at the end. Leave it as .tar
First of all you need to have java, android SDK installed and adb. for this FIRST OF ALL go here and follow the steps
STEP 1 http://www.support-4-you.com/main/i...d-adb-installation&catid=40:how-tos&Itemid=57
http://www.dummies.com/how-to/content/downloading-and-installing-the-java-development-ki.html
Afterwards go here and read a little bit. It will give you an overall of what you need http://forum.xda-developers.com/showthread.php?t=1939300 (Yeah I now is for the s3 BUT BELIEVE ME IT WORKS) leave it open just in case.
then visit this thread
http://forum.xda-developers.com/showthread.php?t=633246 and READ IT!
-Download the kitchen and afterward go to post number 3 to install it, I used the option number one for windows 7. i downloaded dsixda_cygwin_install.zip. If you have other operating system I honestly don't know how to do it.
Also click where it says ''RECOMMENDED: Click here for a pictorial guide to assist you with the Cygwin install (thanks to carl1961).'', it will give you a tutorial on how to install the kitchen. Be patient. sometimes you make the steps and it seems is not doing anything, but its working it's just slow.
follow that pic guide on how to install and when you're setting up your rom when it opens the ext2explore tool you dont see your system.img close the kitchen and delete the working folder and start again setting it up and it will work. (at least for me, the 1st time i had no ext4_system.img, the second time I did)
VERY IMPORTANT. After you extract the system, EXTRACT THE CSC If not your rom WON'T WORK.
(Diskinternals linux reader is found on the kitchen folder, then tools. FYI)
ok. after you have Installed the kitchen and the working folder is ready
go to the working folder and delete ext4_system.img from system folder if there is any. Then
-Choose option 0- Advanced Options
-Then choose option 11 Deodex files in your rom
-Then ''bb'' IF YOU WANT
-Then ''v'' and set android level to 16
-then option ''b'' and sit back and wait.
-Then option ''x'' when it's done
-Choose option 99 and follow the steps. remember to zipalign the apps and sign your rom, then change the name of the rom if you want.
- I did not rooted my rom. i use the method 2 from here http://forum.xda-developers.com/showthread.php?t=1896696 to root it aftwerwards. :fingers-crossed:
FINAL STEP! MANDATORY! PLEASE PRESS THANKS IF THIS POST HELPED YOU! :good: :victory: :highfive:
Then copy the rom to your external sd and wipe data, cache , dalvik and go to mount and storage and format system.
go back and flash rom from external sd.
:angel: there you go, your deodexed rom! :fingers-crossed:
I hope this have been helpfull
Hi I have a stick rom that is deodexed and I use this works like a charm
http://forum.xda-developers.com/showthread.php?t=1953705
Hope it helps
Sent from my GT-N7100 using xda premium
Thanks this id the one that I plan to use after I deodex my rom
I was able to deodex my rom with dsixda! Thanks to wanam for showing me that tool.
plotinus said:
I was able to deodex my rom with dsixda! Thanks to wanam for showing me that tool.
Click to expand...
Click to collapse
Can you explain how to do it ? I mean, how can we do it ?
Laynee1 said:
Can you explain how to do it ? I mean, how can we do it ?
Click to expand...
Click to collapse
Of course. Im working but let me get home and i will post exactly what i did
plotinus said:
Of course. Im working but let me get home and i will post exactly what i did
Click to expand...
Click to collapse
Thanks in advance mate!
Waiting for your reply
Sent from my GT-N7100 using xda premium
THREAD UPDATED. enjoy
Thanks a lot mate.. Due to my exam obligations, ill do this bit later.
Still, thanks! You are awsome..
P.s. And thanks to wanam and rest devs who created threads that this post is reffering to!
Sent from my GT-N7100 using xda premium
Laynee1 said:
Thanks a lot mate.. Due to my exam obligations, ill do this bit later.
Still, thanks! You are awsome..
P.s. And thanks to wanam and rest devs who created threads that this post is reffering to!
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Ok excellent good luck in the exams! Let me know how it goes once you do it
I present to you guys the latest Custom Rom Deodex
C6943_14.4.A.0.109_EAS_CR.zip
First of all I want to thank a lot, and give credit to those who contributed and a lot with this project, that without them I would not have realized:
XDA Developers
@MikeChannon
@Nut
@Rajeev
@Eliminator79
@beniamin24
@ogunja.
@victormagalhaes87
Diego S. Dias
Janeh Magalhães
And a special thanks to @MikeChannon for giving me this opportunity!
And all members of the Xda Developers who contributed their tips and Mods and Apps !!
________________________________________________________________________________________
For the C6903 model, it is necessary that Digital TV is off (Settings / Applications / Digital TV), the more everything is right.
Procedure for Installation and Configuration of Custom Rom:
Video Tutorial Click Here (in Portuguese)
MAKE THE DOWNLADS OF ALL FILES FIRST SAVE AND A CUSTOM ROM ON SD
StockRom
1o. Do a backup (I used up the recovery mode, but use the Titaniun backup if you prefer), and store in sd
2oFlashtools with rom based 14.4.A.0.108 (Android 4.4.4)
3o.Pass the stock rom
4o.Do the basic Root Settings and enable installation from unknown sources (Settings / Security) Enable USB Debugging (Settings / About phone 9 times in one click Number Version) (ZL-BETA-lockeddualrecovery2.7.154 Extract and put in a folder easy to access and click on option 3) click on and install SuperSU,
5o.Entre in Recovery (Power off the device and make the call and when you ascend the LED in green color press Volume mode - And loose click Install and select a custom rom that this was where the installation of custom Rom that in Sd
6o.Wipe Dalvik cache and Restarts
GIVE ALL PERMITS TO BELOW SuperSU APPLICATIONS !!
Xposed
7o. Open the Installer and make the installation of Framework
8o. After the restart enable mods, Xposed Serajr and restart the device
9pen the serajr Xposed and enable Customization (System, System Interface, Xperia Home, media)
In the upper right menu click save, it will ask SuperSU, Authorizes permission and resetting the system)
10th. After this process, updates will appear album, ... etc ... DO NOT FEAR.
I do not use Titanium Backup's option, use the backup of the recovery, but this rom is for those who want to use Titanium and restore backups previously done ..
C6943 14.4.A.0.109 EAS - CustomRom Saved in SD
DO NOT BLAME ME FOR ANY DAMAGES THAT MAY RESULT IN YOUR PHONE!
I am not responsible if you brick your device, make by own risk!
Again Credits and Thanks to All Involved direct and indirect
If you like my work
Click Thanks
And if you want to leave a donation
Click Here
Deodex the latest rom allowing the option of Mods for Xperia Z1, and Custom Already with the following applications and Mods Installed:
Xposed installer,
Serajr,
GEM Xposed,
NDR Utils,
AOSP( NavBAr Buttons)
Sound Mod for both speakers(Top / Bottom)
Titanium Backup
4Shared,
RootExplorer,
Aptoide,
Câmera next da google,
4k,
Timeshift,
Quickboot,
Telegram,
Whatsapp,
Apk do grupo Xperia Mods Z1/Z2
Viper4,
Sound in UPPER AND LOWER SPEAKER
Improvements in performance with Low Battery Consumption
Port Z3:
Home,
Contacts,
Calculator,
SMS,
Album,
Walkman
Update Center
View attachment 2981443View attachment 2981444View attachment 2981445
View attachment 2981446View attachment 2981448View attachment 2981449
Great job
Great job, Eduardo
I hope you continue contributing in this project.....Always stay hungry !!
Thanks for mention
there will be a black version?
I would definitely like to see your Rom
Ohle76 said:
there will be a black version?
I would definitely like to see your Rom
Click to expand...
Click to collapse
Hello friend, could rephrase the question?
Eduardo.xperiaZ1 said:
Hello friend, could rephrase the question?
Click to expand...
Click to collapse
He was asking if you are going to make a black version of certain apps like messaging, settings, dialer, contacts, and other stock apps
Kind of like kit slim rom where he has flushable black apps
Eduardo.xperiaZ1 said:
Hello friend, could rephrase the question?
Click to expand...
Click to collapse
Hello friend, could rephrase the question? If you want to leave it all black, you can visit this link: http://forum.xda-developers.com/showthread.php?p=53790396 @Rajeev friend
ploopower79 said:
He was asking if you are going to make a black version of certain apps like messaging, settings, dialer, contacts, and other stock apps
Kind of like kit slim rom where he has flushable black apps
Click to expand...
Click to collapse
We have a new project that already (as an option for the user's choice), but we are waiting out the update that occurs before the Android Lollipop.
Thank you so much !!!
Eduardo.xperiaZ1 said:
We have a new project that already (as an option for the user's choice), but we are waiting out the update that occurs before the Android Lollipop.
Thank you so much !!!
Click to expand...
Click to collapse
Thank YOU for providing another rom for us to flash and test and taking your time to work hard on it!
ploopower79 said:
Thank YOU for providing another rom for us to flash and test and taking your time to work hard on it!
Click to expand...
Click to collapse
I hope you like and enjoy this custom rom.
what is the app responsible for sms(port z3)?
shoonari said:
what is the app responsible for sms(port z3)?
Click to expand...
Click to collapse
Hello. Yes, the sms that is in this Custom Rom, portei of the Z3(Native).
Thank you
Where the hell did you get android 4.4.5!?
Eduardo.xperiaZ1 said:
Hello. Yes, the sms that is in this Custom Rom, portei of the Z3(Native).
Thank you
Click to expand...
Click to collapse
thanks, but id like to know exact app name is it possible to extract it separately and insert into my current rom, or there are some integration issues?
shoonari said:
thanks, but id like to know exact app name is it possible to extract it separately and insert into my current rom, or there are some integration issues?
Click to expand...
Click to collapse
Sorry, but this is not possible, it may cause conflicts in your Rom, and lose their native sms.
adam20115 said:
Where the hell did you get android 4.4.5!?
Click to expand...
Click to collapse
( Laughs) Android 4.4.5, I could not, it's my creation, due to various changes in the system, but preserving stock Kernel.
Thank you
some help maybe
hi i have one rom for 6943 that already stock but with recovery and root. That mean that you can do your tuto more easier, i supposed. sry my bad bad english.
Rom based on this: https://forum.xda-developers.com/elephone-p9000/development/rom-aokp-nougat-t3690278
Full credits go to the AOKP team who made the rom for P9000.
To use on P9000 Lite you may need CWM 3.0.2.8 and you have to restore the backup zip provided in the link.
Features:
- Same as P9000 AOKP rom.
- Gapps (Micro) come preinstalled.
Warnings:
- The unpacked rom uses up to 5200MB, so make sure you got free space!
- Put the rom backup on an SD Card, not on internal memory.
- Fingerprint options make the settings app crash (Obviously).
Bugs:
- The rom occupies about 20GB because of a bug.
- Charging seems to be painfully slow. (If someone could fix this, it would be really awesome.)
Installation:
You have to put the folder from the zip in TWRP\BACKUPS.
It should appear and then you should be able to see the rom and install it.
Download Links:
http://aftermath-studio.go.ro/IBOVHQ49DEAML78T.zip
http://aftermath-studio.go.ro:8080/Upload/IBOVHQ49DEAML78T.zip - Edit: I also added a torrent in the attachments.
(Please post to mirrors and post comments with the mirrors, and I'll update the original post)
Good luck!
Update:
For my phone, it charged the battery a bit, or so it seems, and then it kept going down.
Not sure what the bug is, at least for now.
So keep this in mind while downloading.
Any contribution is greatly appreciated.
xnd_bogdan said:
Update:
For my phone, it charged the battery a bit, or so it seems, and then it kept going down.
Not sure what the bug is, at least for now.
So keep this in mind while downloading.
Any contribution is greatly appreciated.
Click to expand...
Click to collapse
ATM I can only point you to CONFIG_MTK_PUMP_EXPRESS_(PLUS_)SUPPORT.
Did you set the following in devconfig?
Code:
CONFIG_MTK_PUMP_EXPRESS_SUPPORT=y
CONFIG_MTK_PUMP_EXPRESS_PLUS_SUPPORT=y
Tarkness said:
ATM I can only point you to CONFIG_MTK_PUMP_EXPRESS_(PLUS_)SUPPORT.
Did you set the following in devconfig?
Click to expand...
Click to collapse
he ported the rom, doesnt seem like he build it
Ruben Craveiro said:
he ported the rom, doesnt seem like he build it
Click to expand...
Click to collapse
Yup.
That's what I did
xnd_bogdan said:
Yup.
That's what I did
Click to expand...
Click to collapse
you need to change more modules and change some stuff on boot.img i think on the file init.rc on boot.img to allow charging
Ruben Craveiro said:
you need to change more modules and change some stuff on boot.img i think on the file init.rc on boot.img to allow charging
Click to expand...
Click to collapse
I'll definitely try doing that but for now I took a break, since finals are coming.
If somebody fixes it before I get to have some free time, that would be even better to be honest.
xnd_bogdan said:
I'll definitely try doing that but for now I took a break, since finals are coming.
If somebody fixes it before I get to have some free time, that would be even better to be honest.
Click to expand...
Click to collapse
i doubt that will happend, i dont think many people use the lite version, me in particular use the normal version, so i cant really fix it.
Do we know if anyone fixed it?
Sent from my Redmi 5 Plus using Tapatalk
Hi!
Anybody fixed the problems?
Hello.
I was going to continue porting this but unfortunately my phone failed so I was forced to buy a new one.
I'm afraid I can't work on this anymore, as I no longer have a p9000 lite