Related
Based on: This thread.
-------------------------------------------------------------------------------------------------------------------------
Screenshots:
Video from original thread, so not on Xperia S but Galaxy Nexus.
-------------------------------------------------------------------------------------------------------------------------
Tested working on FXP145 and newer. Older should probably work too, but I'm not sure about that. (CM10 and Xperia S, of course)
Please report if it works and any bug you run in to! And you might want to backup the files modded by this mod (services.jar, framework-res.apk, framework2.jar, framework.jar and android.policy.jar which are all in the system/framework/ folder) in case you want to get back to the original lockscreen.
-------------------------------------------------------------------------------------------------------------------------
Download:
Here.
Warning! Somebody reported to me the mod isn't working properly on FXP149. Somebody else reported it working though, so I guess it should be fine. You probably want to backup your files for the sake of safety though.
Install instructions:
1. Save the zip to your phone's memory.
2. Reboot into recovery.
3. Go to "Install from zip" -> "Install from sdcard" and select the zip file.
4. Follow the onscreen instructions.
5 . Reboot device and enjoy!
-------------------------------------------------------------------------------------------------------------------------
Big thanks to:
evilisto for making the patch needed for this mod!
The FXP team(Bin4ry, Defer, Kali, Jerpelea) for making this beatiful rom!
Been waiting for this and it works great. Only thing is that when you unlock it the time doesn't dissappear straight away, but this is so minor I don't really care. Thanks a lot!
---------- Post added at 02:20 PM ---------- Previous post was at 01:49 PM ----------
Also swipe in any direction doesn't always show up
Sent from my Galaxy Nexus using xda app-developers app
Will this work with Paranoid Android 2.55 ? :x
Probably will work. Back up the files and try it if you want to know, you can always restore!
markk1995 said:
Probably will work. Back up the files and try it if you want to know, you can always restore!
Click to expand...
Click to collapse
I tried, and i'm stuck at bootanimation ^^' it does'nt work :./
martinko23 said:
I tried, and i'm stuck at bootanimation ^^' it does'nt work :./
Click to expand...
Click to collapse
The framework is different. Give him the PA 2.55 framework-res.apk (and maybe a few other files, I don't remember what is used) so he can apply over it.
I am just waiting for FXP to fix the problems on their kernel which was causing problems on dual boot to update my PA to the next version, so consider it, @OP, a request for the future.
markk1995 said:
Been waiting for this and it works great. Only thing is that when you unlock it the time doesn't dissappear straight away, but this is so minor I don't really care. Thanks a lot!
---------- Post added at 02:20 PM ---------- Previous post was at 01:49 PM ----------
Also swipe in any direction doesn't always show up
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot for trying it out!
Yes I know about that first one, but as you can see in the video, it's in the original mod too. So I don't think I can do anything about it. Will look into the source though.
That second thing looks interesting, because here it shows up every time, even though sometimes barely visible. Are you sure it really isn't there sometimes?
Felimenta97 said:
The framework is different. Give him the PA 2.55 framework-res.apk (and maybe a few other files, I don't remember what is used) so he can apply over it.
Click to expand...
Click to collapse
Sadly enough that won't work, because the patch (from the original mod) isn't done to the compiled (framework-res.apk, framework.jar etc...) files, but to the source code. Then I compile it and pick out the files needed, pack them up in a zip file, and deliver them to you .
Felimenta97 said:
@OP, a request for the future.
Click to expand...
Click to collapse
Yeah I was already thinking about that, but I don't know for sure if it will work. Since this patch is made for CM10, I think it might break some things specific to PA. I'll download the PA source and try it out when I have some spare time
TiesB said:
Thanks a lot for trying it out!
Yes I know about that first one, but as you can see in the video, it's in the original mod too. So I don't think I can do anything about it. Will look into the source though.
That second thing looks interesting, because here it shows up every time, even though sometimes barely visible. Are you sure it really isn't there sometimes?
Sadly enough that won't work, because the patch (from the original mod) isn't done to the compiled (framework-res.apk, framework.jar etc...) files, but to the source code. Then I compile it and pick out the files needed, pack them up in a zip file, and deliver them to you .
Yeah I was already thinking about that, but I don't know for sure if it will work. Since this patch is made for CM10, I think it might break some things specific to PA. I'll download the PA source and try it out when I have some spare time
Click to expand...
Click to collapse
It can break something at PA source, but it is based on CM10, so how knows.
"What really matters in this world, anyway?"
At second glance it is there but behind the black background so hardly visible for me
Can you make it for T989 running cm10?
Ynx ion advance.
markk1995 said:
At second glance it is there but behind the black background so hardly visible for me
Click to expand...
Click to collapse
Yeah that's kinda what I thought. I'll look into the code if I can maybe "layer it up" or something, but don't pin me down on that .
ghassir said:
Can you make it for T989 running cm10?
Ynx ion advance.
Click to expand...
Click to collapse
That should be possible for sure. That's the the T-Mo S2 right? Downloading the source code atm.
I'm sorry for the late response, I was at my grandparents' and didn't have a pc with internet over there...
Sent from my Xperia S using xda app-developers app
Doesn't boot with AOKP and the kernel from kali
googleye said:
Doesn't boot with AOKP and the kernel from kali
Click to expand...
Click to collapse
Because it's made for CM10 my friend but still thanks for trying because I now know I'll have to build a special one for PA and AOKP
Btw, a small status update: I've ran out of disk space on my wubi install so I'm waiting on my NAS to come, which should arrive somewhere next week. Then I can move all my media (movies, music etc...) to the NAS, and resize my wubi disk to a lot bigger one Then the sources I was downloading can continue
Perfect in fxp 147
TiesB said:
Because it's made for CM10 my friend but still thanks for trying because I now know I'll have to build a special one for PA and AOKP
Btw, a small status update: I've ran out of disk space on my wubi install so I'm waiting on my NAS to come, which should arrive somewhere next week. Then I can move all my media (movies, music etc...) to the NAS, and resize my wubi disk to a lot bigger one Then the sources I was downloading can continue
Click to expand...
Click to collapse
I thought it would still work, isn't AOKP based on CM or am I way out of line here? Anyways a version for AOKP would be appreciated :good:
googleye said:
I thought it would still work, isn't AOKP based on CM or am I way out of line here? Anyways a version for AOKP would be appreciated :good:
Click to expand...
Click to collapse
AOKP had its own source code.
"What really matters in this world, anyway?"
Are there more themes for lockscreen available?
does not xcream on then?
i love this loocscreen, someone test it in fxp 148?
patato800 said:
Are there more themes for lockscreen available?
Click to expand...
Click to collapse
Yes, the
guy who made this patch (evilisto), also made some other ones like the BB10 (I believe) LockScreen. If you want you can request one from his threads and I should be able to make it
fabidesca said:
does not xcream on then?
Click to expand...
Click to collapse
Nope, I'm sorry. Only works on CM10
Sent from my Xperia S using xda app-developers app
Q&A for [ROM][WIP]NamelessROM [ALPHA][s6810x][20/11/14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][WIP]NamelessROM [ALPHA][s6810x][20/11/14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thanks!!
Thanks @corsicanu for this great job. I'm with CM 0.4.. I need wipe my data or just flash it? Recording audio in WhatsApp is working? Cause CM 0.5 will come out with audio bug yet Thank again
erickbarreto said:
Thanks @corsicanu for this great job. I'm with CM 0.4.. I need wipe my data or just flash it? Recording audio in WhatsApp is working? Cause CM 0.5 will come out with audio bug yet Thank again
Click to expand...
Click to collapse
I tried to flash NamelessRom over wulsic's cm11 and it didn't boot.. So you need to make full wipes... Regarding whatsapp audio, i have this bug also, since is builded with same device three but i'm going to help Winston to fix the source and my alpha 0.2 and his 0.6 build will come faster and also less buggy.. Cheers!
Sent from my GT-I9300 using Tapatalk
6812
no release for the duos version?
Not yet since i don't have the device or sourcecode.. Maybe sometime in the future.. You can try @wulsic commands to enable dualsim from cm11 thread but since in his rom doesn't work, it's a pretty small chance to work in NamelessRom.. For duos i think we need to make a separate device tree..
Sent from my GT-I9300 using Tapatalk
Do you need some logcat?
wow, thx this rom is amazing.
working perfect in M version.
Jus wait for root fix
amaurypastora said:
Do you need some logcat?
Click to expand...
Click to collapse
i think yes,you can log all error you seen ,it's make easly to fix
unable to install on my device. I get a error message "This package is for device nevisp; this deice is nevis"
my device is a s6810p.
is this firmware not designed for this model???
daljitbanga said:
unable to install on my device. I get a error message "This package is for device nevisp; this deice is nevis"
my device is a s6810p.
is this firmware not designed for this model???
Click to expand...
Click to collapse
you need flash last cwm on post sir
found out some bugs:
video recording doesn't work
no unmount external sd options in storage
no root access
still daily usage for me though. thanks
blackwatch92 said:
found out some bugs:
video recording doesn't work
no unmount external sd options in storage
no root access
still daily usage for me though. thanks
Click to expand...
Click to collapse
Build 0.2 is compiling, hopefully with some fixes about root acces and some more optimisations...
I`m intrigued about ram usage - 230mb free after clean install, ~170mb free after installing some usual apps...
Meanwhile:
didn`t knew about sdcard because i don`t have any
video recording worked for me, only front cam recording FC
root missing has been mentioned..
Build 0.3, somewhere this week it will contain fix for framebuffer (still need to merge some things from @wulsic`s patches) and maybe other fixes... I`ll mention them when i will know what i fixed
LE: Build 0.2 is up - still having su issue... I need to dive into it...
I've got a work around for the su fix, use the kernel of wulsic's cm11 build 0.5
blackwatch92 said:
I've got a work around for the su fix, use the kernel of wulsic's cm11 build 0.5
Click to expand...
Click to collapse
I was thinking today at the same thing but i didn`t had time to test... I`ll replace in my zip the kernel with @wulsic`s from 0.5 and i`ll test to see if it works.. Thank you!
wow, thx for the hard work, this rom is amazing, is there a way to install apps into the sd card with your rom?¿
Excellent work. Awesome rom for galaxy fame. Very much faster than stock and also more stable than the wulsic's CM11 0.5 build. Needs a little bit more work. I found following bugs:
Some apps force close.
Calculator does not work.
Laggy boot animation.
At Last Thanks for your great effort for Galaxy Fame and good luck for next builds.
Sent from my GT-S6810P using XDA Premium 4 mobile app
hannan rana said:
Excellent work. Awesome rom for galaxy fame. Very much faster than stock and also more stable than the wulsic's CM11 0.5 build. Needs a little bit more work. I found following bugs:
Some apps force close.
Calculator does not work.
Laggy boot animation.
At Last Thanks for your great effort for Galaxy Fame and good luck for next builds.
Sent from my GT-S6810P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The bootanimation problem is because of the large resolution.. I will probably change it to smaller in the next build..
System/User apps are FC because of some java errors and other..
Indeed is faster than cm11 probably because of the optimisations added by me in the build script.
I`ll try to improve and work further for this rom but i don`t have much time between work and home...
Cheers!
daljitbanga said:
unable to install on my device. I get a error message "This package is for device nevisp; this deice is nevis"
my device is a s6810p.
is this firmware not designed for this model???
Click to expand...
Click to collapse
open upadter-scrpts with Notepad++ delete command is called like nevis,nevisp or something like that,i think in the updater-scripts has 2 lines about nevis and nevisp :3 try it
faizauthar12 said:
open upadter-scrpts with Notepad++ delete command is called like nevis,nevisp or something like that,i think in the updater-scripts has 2 lines about nevis and nevisp :3 try it
Click to expand...
Click to collapse
I`m 100% sure he had cwm 6.0.4.6 so even he changes updater script, it won`t be able to flash it..
I didn`t removed those lines because when you flash 4.4.4 in (my) old recovery it flashes and gives error when setting metadata, and after the device will bootloop.. If the flash is interrupted at start because of the device name, the system is untouched and it can return to the previous state/rom..
It's perfect! But I have a problem... The bluetooth not working altogether. I tried to connect my headphones and not let me, appears to me "Could not connect to Nokia BH-503 because the password or PIN is incorrect".
It can be? Obviously, the headphones do not have a password or PIN.
Please help me!
P.S: Sorry for my bad English...
STOCK ANDROID NOUGAT [N] CAMERA FOR ALL CUSTOM ROM
How To Install
1. Download Zip file
2. Reboot into TWRP recovery
3. Flash Zip file
4. Reboot
5. Done Enjoy Stock Camera on any custom rom
I'd like to give credit to DevendraMilmile121 for the original port here.
Also credits to data365 for his mod here
I patched the apk to avoid the FC when com.motorola.frameworks.core.addon.jar is present.
No need to delete the com.motorola.*** .jar files from system/framework/
Download v6.0.54.1
Download v6.0.78.1
Enable Write to external sdcard:
ExtSD_Fix_rw-signed-v1.9b.zip
Thank you so much. Working fine on pure Nexus
Enviado desde mi Moto G4 mediante Tapatalk
Many thanks for this, working on resurrection remix 5.8.3 26/04 build without issue. how did you get around the FC problem, if I may ask?
Working fine on crDoid. Thank you so much!
echo92 said:
Many thanks for this, working on resurrection remix 5.8.3 26/04 build without issue. how did you get around the FC problem, if I may ask?
Click to expand...
Click to collapse
My understanding is that when /system/framework/com.motorola.frameworks.core.addon.jar is present
com.motorola.camera.device.framework.CameraMotExt.<clinit> fails to find class "android.hardware.Camera$EnvDetectCallback"
So I emptied out the static method (<clinit>) and initialised a couple of variables outside.
I used DexPatcher to modify it.
Then the behaviour is the same as if /system/framework/com.motorola.frameworks.core.addon.jar wasn't there.
Clearly this is a workaround not a fix. It would be nice to know why it can't find the class and fix it so that "CameraMot" is supported (I guess this is some hardware optimisation)
Would you please share another link beside afh because i get some problem with download from afh
Thank you for this. After I deleted those files, an FC message saying "Motorola Settings" has stopped would greet me at every boot. This'll take care of that.
I don't believe it has anything to do with video recording though, does it?
baunthiyal said:
Thank you for this. After I deleted those files, an FC message saying "Motorola Settings" has stopped would greet me at every boot. This'll take care of that.
I don't believe it has anything to do with video recording though, does it?
Click to expand...
Click to collapse
I didn't see issues with video recording either with the patched Moto camera and deleting the .jar files, or using this Moto camera as is. The Motorola settings seems to pop up whenever, but dismissing it doesn't seem to cause issues with the camera app or the system itself - curious!
dedik46 said:
Would you please share another link beside afh because i get some problem with download from afh
Click to expand...
Click to collapse
https://ufile.io/y6fm5
How to change the storage location to external SD card.? It is not accessible through settings.
Thanks in advance.
ramansehra said:
How to change the storage location to external SD card.? It is not accessible through settings.
Thanks in advance.
Click to expand...
Click to collapse
https://forum.xda-developers.com/mo...-motorala-camera-write-to-externalsd-t3498573
gabriwinter said:
My understanding is that when /system/framework/com.motorola.frameworks.core.addon.jar is present
com.motorola.camera.device.framework.CameraMotExt.<clinit> fails to find class "android.hardware.Camera$EnvDetectCallback"
So I emptied out the static method (<clinit>) and initialised a couple of variables outside.
I used DexPatcher to modify it.
Then the behaviour is the same as if /system/framework/com.motorola.frameworks.core.addon.jar wasn't there.
Clearly this is a workaround not a fix. It would be nice to know why it can't find the class and fix it so that "CameraMot" is supported (I guess this is some hardware optimisation)
Click to expand...
Click to collapse
Yes look forward to [emoji4]
gabriwinter said:
STOCK ANDROID NOUGAT [N] CAMERA FOR ALL CUSTOM ROM
How To Install
1. Download Zip file
2. Reboot into TWRP recovery
3. Flash Zip file
4. Reboot
5.Done Enjoy Stock Camera on any custom rom
Download
All credits to DevendraMilmile121 for the original port here.
I just patched to avoid the FC when com.motorola.frameworks.core.addon.jar is present.
No need to delete the com.motorola.*** .jar files from system/framework/
Click to expand...
Click to collapse
Thx!!!!!!!!!!!!!!!!!!
Can we auto-update via Playstore to newer version?
Is quality as good as it's on stock roM? thx!!!!!!
optionalmgrr.la said:
Thx!!!!!!!!!!!!!!!!!!
Can we auto-update via Playstore to newer version?
Is quality as good as it's on stock roM? thx!!!!!!
Click to expand...
Click to collapse
It can't be updated or it would loose the patch.
Quality wise I would say it's close to stock but probably a little below (can someone confirm this?)
For now I think this is the best we can get for non stock roms.
If someone wants to step up and try to get a proper fix that would be ideal.
gabriwinter said:
It can't be updated or it would loose the patch.
Quality wise I would say it's close to stock but probably a little below (can someone confirm this?)
For now I think this is the best we can get for non stock roms.
If someone wants to step up and try to get a proper fix that would be ideal.
Click to expand...
Click to collapse
Cool. Let's hope someone fix this further
i mean, perhaps setup a wrapper to divert the error message.... something like that.
btw, on stock there is a "Camera tuner for Moto G(4)", is it needed?
https://play.google.com/store/apps/details?id=com.motorola.imagertuning_athene
optionalmgrr.la said:
btw, on stock there is a "Camera tuner for Moto G(4)", is it needed?
https://play.google.com/store/apps/details?id=com.motorola.imagertuning_athene
Click to expand...
Click to collapse
I'm using cr droid and had this camera tuner by default
i'm geting "device not compatable" when i open the camera. And nothing to delete com system/framework
i have an moto x2 (xt1097) on aosp extended 7.1.2
help
tiagovicente2 said:
i'm geting "device not compatable" when i open the camera. And nothing to delete com system/framework
i have an moto x2 (xt1097) on aosp extended 7.1.2
help
Click to expand...
Click to collapse
This camera port is for athene only.
I got bored, so I decided to build the latest TWRP. Big thanks to @negamann303 for his source. I only made minor, mostly theme related, tweaks to it. The only non-theme related tweak that I can remember is that I enabled the flag that enables taking advantage of NEON, so that might result in some speed increases, but I haven't done any tests to confirm that.
Q: Sweet! Does ADB backup work?
A: No. Sorry. If you know how to make it work, please let me know and I will implement it.
Q: Oh. So this is basically the same as the previous version?
A: Pretty much. I imagine it supports a whole bunch of new things that our watch isn't capable of, but who cares. It also features the nag screen that asks if you want to install the official TWRP app, which is useless in this case. You can tell it to stop though.
Q:So why should I bother with this?
A: Because you're a flashaholic that needs to have the latest and greatest thing. Duh.
SOURCE
Device: https://github.com/theSt33v/omni_twrp_device
Kernel: https://github.com/Negamann303/Huawei-W-1.5-2.0
TWRP: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Does this work with the android 2.0 on the Huewai? Also, is there an img file to flash in fastboot? Thanks.
jnewberry1 said:
Does this work with the android 2.0 on the Huewai? Also, is there an img file to flash in fastboot? Thanks.
Click to expand...
Click to collapse
It does, and - have you tried downloading the ZIP and checking what's hiding inside?
munky-head said:
It does, and - have you tried downloading the ZIP and checking what's hiding inside?
Click to expand...
Click to collapse
LOL. My bad. I just assumed it was a flashable zip. Thank you.
1st of all: Thank you soo much!!!!
How could I theme this?
(also you only build it with a local manifest or do you also have a git, which I could fork for theme testing?)
BIade said:
1st of all: Thank you soo much!!!!
How could I theme this?
(also you only build it with a local manifest or do you also have a git, which I could fork for theme testing?)
Click to expand...
Click to collapse
Sources are posted in the OP. Help yourself. I don't know much about TWRP theming, but I do know that the files you want to modify are found in device/huawei/sturgeon/watch_mdpi. This is the folder that was modified by @negamann303, and by myself to a lesser extent, to get the theme that you see in the version that I built. There is also a watch_mdpi folder in the TWRP source somewhere that contains the default watch theme. TWRP is also capable of themes that can be applied post-build so you don't have to build a new one every time you want it to look different, but I don't know anything about how to make that happen. Search XDA for flashable TWRP themes for examples, but make sure they're for 3.1.0. The theme template has changed a bit from previous versions. Hope that helps!
TheSt33v said:
Sources are posted in the OP. Help yourself. I don't know much about TWRP theming, but I do know that the files you want to modify are found in device/huawei/sturgeon/watch_mdpi. This is the folder that was modified by @negamann303, and by myself to a lesser extent, to get the theme that you see in the version that I built. There is also a watch_mdpi folder in the TWRP source somewhere that contains the default watch theme. TWRP is also capable of themes that can be applied post-build so you don't have to build a new one every time you want it to look different, but I don't know anything about how to make that happen. Search XDA for flashable TWRP themes for examples, but make sure they're for 3.1.0. The theme template has changed a bit from previous versions. Hope that helps!
Click to expand...
Click to collapse
Worked, thank you very much
Thank you, im really happy now
Cheers
Blade
P.S.: @TheSt33v I changed
Code:
%col1_x_left%
to 50 for some titles, due to the round sceen cutting some header texts in statusbar. (see last screenshot)
BIade said:
Thank you, im really happy now
Cheers
Blade
P.S.: @TheSt33v I changed
Code:
%col1_x_left%
to 50 for some titles, due to the round sceen cutting some header texts in statusbar. (see last screenshot)
Click to expand...
Click to collapse
Sexy. Maybe I'll look into making that an applyable theme for everyone if I find some time. Can you post your watch_mdpi folder?
Looks like 3.1.1 came out today. I'll have to get on that too.
TheSt33v said:
Sexy. Maybe I'll look into making that an applyable theme for everyone if I find some time. Can you post your watch_mdpi folder?
Click to expand...
Click to collapse
I already did ^^
BIade said:
I already did ^^
Click to expand...
Click to collapse
You explained what you did, but I don't see the actual folder uploaded anywhere. It would save me some time if I didn't have to reproduce what you did.
TheSt33v said:
You explained what you did, but I don't see the actual folder uploaded anywhere. It would save me some time if I didn't have to reproduce what you did.
Click to expand...
Click to collapse
Sorry, I meant, I already created a flashable theme-zip. I will share it tonight, when I arrive at home...
BIade said:
Sorry, I meant, I already created a flashable theme-zip. I will share it tonight, when I arrive at home...
Click to expand...
Click to collapse
I hate to nag you, but could you post that theme when you get a chance? I'd like to see it in person.
@TheSt33v Sorry mate, for the late response. As promised here my theme (Just a WIP, I used a template for the filestructure etc.)
This saves me time from having to do it myself, I can look into removing the nag screen if you haven't figured it out yet
Sent from my SM-G935P using Tapatalk
negamann303 said:
This saves me time from having to do it myself, I can look into removing the nag screen if you haven't figured it out yet
Sent from my SM-G935P using Tapatalk
Click to expand...
Click to collapse
I forgot it was even there, so I wasn't looking into it. Once you disable it the first time, it's gone for good unless you wipe the device. Let me know if you figure out how to get rid of it though. I'm surprised there isn't just a flag to enable.
Thx, worked as expected and the good thing is : sideload don't must be fall back to the old protocol
Sorry guys first time flash on android wear however i am familiar with android phone flash. Please tell me how to install this?
long.nguyen said:
Sorry guys first time flash on android wear however i am familiar with android phone flash. Please tell me how to install this?
Click to expand...
Click to collapse
Same as with a phone. Extract the .img file from the zip attached to the post, boot watch in bootloader mode, plug into computer, fastboot flash recovery [path to twrp image file].
Finally Cyberpunk 2077 for 7T!!!
This module contains the following:
>>Cyberpunk Bootanim
>>Cyberpunk edgelights
>>New warp anim and fp anim
>>Custom cyberpunk clock by me
>>Lock , unlock, and warp sound
>>Custom about phone image.
Strictly to be flashed in magisk!
FOR THE MODULE TO WORK, FLASH OVERLAY MOUNT FIX FROM MAGISK REPOSITORY.
*People on rice should choose between either of the 2...(sadly)
Installing this along with rice might mess up your phone and I AM NOT RESPONSIBLE FOR THAT!
THOSE WHO WANT EDGE LIGHTS, PASTE THE feature_list in /oneplus using a sane root explorer. If u mess up, I'm not responsible!
Feature_list link:
feature_list
drive.google.com
Preview:
https://imgur.com/a/Jb29bC9
Download link (for stable):
Cyberpunk7T 10.0.15 & 10.3.7-Magisk.zip
drive.google.com
Download link (for beta 9 users):
Cyberpunk2077 BETA9 7T-Magisk.zip
drive.google.com
Credits to Adil sir and Panl sir for helping throughout!
VICKY is the other guy that made it possible to port it❤
tried it our with lastest stable but didnt work, get bootscreen and was able to get edge lights but no other future besides that.
lil_kujo said:
tried it our with lastest stable but didnt work, get bootscreen and was able to get edge lights but no other future besides that.
Click to expand...
Click to collapse
Some other module u have installed might be conflicting with this one. If on rice, uninstall that. Or try removing all the modules and then installing just this one...I've tried this and many other people did it too, was working fine.
did'nt for my phone too. only boot animation take the changes...
RedSkulxHYDRA said:
Some other module u have installed might be conflicting with this one. If on rice, uninstall that. Or try removing all the modules and then installing just this one...I've tried this and many other people did it too, was working fine.
Click to expand...
Click to collapse
No other module, actually I even clean flash the lastest update cause I was on a custom rom, fully fresh flashed, no modules just that one . Tired several times and no luck. Perhaps is model dependant I don't know. I do get the bootscreen which is very nice, so it is flashing it's just not flashing everything.
By the way i just tried your other module, the one that changes fod and it works just fine. So it might be and issues the the zip file.
cleaned flash beta 9 no mods just this only one and also it didnt work again same thing just bootanimation is working rest of the modifications dont take effect.
lil_kujo said:
cleaned flash beta 9 no mods just this only one and also it didnt work again same thing just bootanimation is working rest of the modifications dont take effect.
Click to expand...
Click to collapse
Flash overlay mount fix from magisk
linozoid said:
did'nt for my phone too. only boot animation take the changes...
Click to expand...
Click to collapse
Flash overlay mount fix from magisk
I flashed this with mount fix when i try to switch CP77 theme in themes it crashes system so hard that it wont even boot beyond to bootanimation. Device is clean flashed OB9 with no other modifications done. Any ideas about it?
bdogan1912 said:
I flashed this with mount fix when i try to switch CP77 theme in themes it crashes system so hard that it wont even boot beyond to bootanimation. Device is clean flashed OB9 with no other modifications done. Any ideas about it?
Click to expand...
Click to collapse
I'll check if something like that is present sir. Will edit and post the new zip soon
RedSkulxHYDRA said:
I'll check if something like that is present sir. Will edit and post the new zip soon
Click to expand...
Click to collapse
Great. Awaiting response from you then
bdogan1912 said:
Great. Awaiting response from you then
Click to expand...
Click to collapse
Sorry for your loss
RedSkulxHYDRA said:
Sorry for your loss
Click to expand...
Click to collapse
Well someone had to test it, gladly i backup all my stuff on cloud account so it doesnt affects me that much for now, i hope it get fixed soon ^^
bdogan1912 said:
Well someone had to test it, gladly i backup all my stuff on cloud account so it doesnt affects me that much for now, i hope it get fixed soon ^^
Click to expand...
Click to collapse
Found the problem. Uploading fix in a few mins. Also, added support for 7 pro.
RedSkulxHYDRA said:
Found the problem. Uploading fix in a few mins. Also, added support for 7 pro.
Click to expand...
Click to collapse
Wowzer! that was hottest hot-fix ever I'll be waitin'!
bdogan1912 said:
Wowzer! that was hottest hot-fix ever I'll be waitin'!
Click to expand...
Click to collapse
Uploaded sir
RedSkulxHYDRA said:
Found the problem. Uploading fix in a few mins. Also, added support for 7 pro.
Click to expand...
Click to collapse
Confirming the fixed version is working without issues. Thanks again!
bdogan1912 said:
Confirming the fixed version is working without issues. Thanks again!
Click to expand...
Click to collapse
Glad u like that
Thanks bro will flash now!