Develop Bugs

[REQ] A Good Guide To Sztupy's Universal Lagfix. Sztupy Chips In Here.

Hi,
I for one is an eternal seeker of a lagfree SGS. But, being Sztupy, he can only spew out TECH. Most people either misunderstand, misinterpret or misdo things that he says & get into trouble.
My request here. Can a dev put things into perspective & give out a simple detailed guide for everyone? It needs to be lucid & comprehensive, & to be understood by both a layman as well as Einstein.
Thanks to all of you for the good work. I now feel proud I chose SGS over X10, my daughter gave me 10 seconds to choose.

ragin said:
Hi,
I for one is an eternal seeker of a lagfree SGS. But, being Sztupy, he can only spew out TECH. Most people either misunderstand, misinterpret or misdo things that he says & get into trouble.
My request here. Can a dev put things into perspective & give out a simple detailed guide for everyone? It needs to be lucid & comprehensive, & to be understood by both a layman as well as Einstein.
Thanks to all of you for the good work. I now feel proud I chose SGS over X10, my daughter gave me 10 seconds to choose.
Click to expand...
Click to collapse
Sztupy's stuff is changing almost daily! A guide would be out of date in no time. Wait a week or so for it to get more stable!

I am SOOO curious to know what Sztupy does in real life...
What is he?

cyborg????

RyanZA said:
Sztupy's stuff is changing almost daily! A guide would be out of date in no time. Wait a week or so for it to get more stable!
Click to expand...
Click to collapse
A guide for a kernel that is meant to be for people to make experimenting easy... kinda strange
Of course there might be a guide which tells you how to achieve the most stable config with ultk, but I'd rather flash voodoo in that case as it's much more stable. (but it's not really meant for people who want to experiment with different hacks and tweaks).
Btw. some cookers already use ultk in their config, and provide some guide on which option to choose (usually they tell you use no-rfs advanced ext4). They also have the added benefit that using the same rom there are less problems and more people can actually try to guess what went wrong (as all of the people on that rom topic are actually using more or less the same config).
The ultk, because it's just a kernel can be flashed to a lot of different roms, and it's possible some of it bugs are there because it's in some way or another incompatible with that particular rom.
Although a simple guide would be:
- Reboot to download mode (by holding voldown+home+power while switching on)
- Flash a complete JPM or JP6 based ROM, using Odin (re-partition ticked, use the 512 pit, and use a package that contains all images (dbdata,cache,system), although dbdata might be optional)
- After flashing reboot to download mode.
- Flash the kernel image over on that rom, using Odin (re-partition is not ticked, only the image is set as the PDA part)
- After flashing reboot to recovery mode (by holding volup+home+power while switching on)
- In the recovery menu chose Advanced ULK features->Lagfix options->No -RFS Advanced (a=e4)
- Press "reboot to recovery"
- After reboot chose not to create a backup, nor a restore
- After it boots up in recovery again press reboot again.
- You'll have a clear system with ext4 on all data partitions

Comeon... he is as human as me & you. I meant his WORK.

ragin said:
I am SOOO curious to know what Sztupy does in real life...
What is he?
Click to expand...
Click to collapse
I create facebook spam campaigns for money for an insurance company. (don't worry, only for hungarians)
And I still havent finished the thing with the deadline of tomorrow morning, because I spent all my weekend on XDA.
You happy now?

sztupy said:
A guide for a kernel that is meant to be for people to make experimenting easy... kinda strange
Of course there might be a guide which tells you how to achieve the most stable config with ultk, but I'd rather flash voodoo in that case as it's much more stable. (but it's not really meant for people who want to experiment with different hacks and tweaks).
Btw. some cookers already use ultk in their config, and provide some guide on which option to choose (usually they tell you use no-rfs advanced ext4). They also have the added benefit that using the same rom there are less problems and more people can actually try to guess what went wrong (as all of the people on that rom topic are actually using more or less the same config).
The ultk, because it's just a kernel can be flashed to a lot of different roms, and it's possible some of it bugs are there because it's in some way or another incompatible with that particular rom.
Although a simple guide would be:
- Reboot to download mode (by holding voldown+home+power while switching on)
- Flash a complete JPM or JP6 based ROM, using Odin (re-partition ticked, use the 512 pit, and use a package that contains all images (dbdata,cache,system), although dbdata might be optional)
- After flashing reboot to download mode.
- Flash the kernel image over on that rom, using Odin (re-partition is not ticked, only the image is set as the PDA part)
- After flashing reboot to recovery mode (by holding volup+home+power while switching on)
- In the recovery menu chose Advanced ULK features->Lagfix options->No -RFS Advanced (a=e4)
- Press "reboot to recovery"
- After reboot chose not to create a backup, nor a restore
- After it boots up in recovery again press reboot again.
- You'll have a clear system with ext4 on all data partitions
Click to expand...
Click to collapse
Thank you for giving this guide. It might help a lot of people. ( This isn't there on your post & nobody cared to tell too).
how about a breakdown on each options in the whole menu? Am I asking for much?

sztupy said:
I create facebook spam campaigns for money for an insurance company. (don't worry, only for hungarians)
And I still havent finished the thing with the deadline of tomorrow morning, because I spent all my weekend on XDA.
You happy now?
Click to expand...
Click to collapse
I love this, I am a Gemini hehe
Some politician said a LONG time ago, 'If you want your words to be understood, 'tell it like you are telling it to a donkey'

sztupy said:
I create facebook spam campaigns for money for an insurance company. (don't worry, only for hungarians)
And I still havent finished the thing with the deadline of tomorrow morning, because I spent all my weekend on XDA.
You happy now?
Click to expand...
Click to collapse
Facebook... check.
Spam... check.
Insurance company... check.
Sir, how does it feel to be the most evil being alive?!

RyanZA said:
Facebook... check.
Spam... check.
Insurance company... check.
Sir, how does it feel to be the most evil being alive?!
Click to expand...
Click to collapse
I'm not evil, I just work for the evil

ragin said:
i am sooo curious to know what sztupy does in real life...
what is he?
Click to expand...
Click to collapse
muaddib69 said:
cyborg????
Click to expand...
Click to collapse
roflmao

ragin said:
Thank you for giving this guide. It might help a lot of people. ( This isn't there on your post & nobody cared to tell too).
how about a breakdown on each options in the whole menu? Am I asking for much?
Click to expand...
Click to collapse
not now, maybe a later time Anyway most of the options just turn on and off some features and tweaks other people made.

I started this thread ina good faith.
Please keep it that way.

sztupy said:
I'm not evil, I just work for the evil
Click to expand...
Click to collapse
Dont hate the player, hate the game....

ragin said:
I started this thread ina good faith.
Please keep it that way.
Click to expand...
Click to collapse
/me too, just joking
(anxious for next release of Sztupy)

Will it work with your Multinational ROM 3.0 (latest)?

sebarkh said:
Will it work with your Multinational ROM 3.0 (latest)?
Click to expand...
Click to collapse
Yep, it's actually preferred to use that rom as a base.

Ok, I'll try and flash it. Sztupy, your ROM is the only Froyo ROM I'm using. Thank You GREAT JOB!!!!

Pls correct me if I am wrong (still learning):
'Ext4 + ext2' means loop means buffer does not fsync ? It this safe? Not always 100% sure everything if saved?
Bind means using a faster but smaller partition ? Safe except for 'running out of space' problems ?
Correct? or?
I still need to test read speeds: How fast is RFS reads compared to EXT4 reading speed? I still believe an ALL EXT4 would be the best lag-fix!
Can /efs be made EXT4? I know /SYSTEM can. I need 48 hours in a day!
Thanks
JKay

[ROM] Roto JMG Pre-Rooted Firmware v1 [Deprecated]

This has a bad wifi bug, lets drop it and shuffle on to JMI!
Finally, Roto-JMG!. My development/jtag Tab was stuck in my luggage in Frankfurt due to all the flight cancellations, but Lufthansa delivered it to me at my home at 2am I was actually pleased to be woke up from a sound sleep, thanks!
I've created this for folks who want a safe and easy to install firmware.
This firmware is for any NA, Euro or Asian GSM Tab. They don't contain and won't install protected bootloaders.
All the files are here:
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JMG/
Note:Please backup your apps and settings with Titanium Backup from the market.
Write down ALL your current APN settings in Settings/Wireless/Mobile/Access Point Names/, the one with the green dot next to it. There is 14 settings in all.
New Jan 30, 2011 Roto-JMG-v1
Fixes:
Stock JMG Swype (fullscreen version FC's sorry)
Added OpenVPN
Added cifs.ko
Added slow-work.ko
Added tun.ko
Added Ebook app
Added car home
Added all language locales
Added AppWidgetPicker
Added module loader script
Added perf tweaks
Full version wipes sdcard if corrupt
Code:
81cb74c5a2c173c8feaaf1b6649d1bd6 Roto-JMG-Full-v1.zip
9449a7eb4de1067488100ad2e16ee541 Roto-JMG-Upgrade-v1.zip
If you already flashed Roto-JME (upgrade or full), just re-flash with the Roto-JMG-Upgrade-v1.tar to get the new apps and not loose any settings.
(other than the home screen, but you can restore that from Titanium Backup right?)
The best option is to backup all your data/apps, flash Roto-JMG-Full-v1.tar with the PDA button and partition with P1_add_hidden.pit. Flash the any modem of your choice with the Phone button as well as its going to be erased due to partitioning. Thats a nice clean setup, guaranteed to work the best
Use the upgrade if you already have a lot of apps installed and you feel lucky. Don't use the pit file with the upgrade firmware. Worst case is you flash the whole enchilada later. Backup your data anyways before hand.
Flash using Odin, using PDA button for any file you flash. If you need/want to flash the addons too, use the PHONE and CSC buttons, they all do the same thing.
Simple how-to guide here:
http://forum.xda-developers.com/showthread.php?t=895827

Wow thanks for that. Just a question before I try this out - can I flash this if I have modacos kernal w ext4 conversion? Do I still use the .pit file?
Sent from my GT-P1000 using XDA App

Hi Roto,
Big THX for this and one question: What about Swype in different languages, like German?
In V4 I was a little bit dissapointed not having my german Swype......

irrelevancy said:
Wow thanks for that. Just a question before I try this out - can I flash this if I have modacos kernal w ext4 conversion? Do I still use the .pit file?
Click to expand...
Click to collapse
I haven't tried any ext4 firmwares yet, so I don't actually know. I'd assume you'd have to flash Roto-JMG-Full with the .pit file. I'm sure someone will chime in soon with the answer.

jammysunny said:
Hi Roto,
Big THX for this and one question: What about Swype in different languages, like German?
In V4 I was a little bit dissapointed not having my german Swype......
Click to expand...
Click to collapse
In general I'm disappointed with Swype being so tied to the firmware. Roto-JMG has the stock Swype which includes German. I really want to remove it altogether to reclaim 11mb of valuable space, but we'll see.

OKAY, so i flash your FW now
In V4 I tried to remove the original Swype in order to install my Swype Version, but it failed by uninstalling it "This Software cant be removed"
Maybe you manage this removing of Swype, so users like me can install this later.....

Do we know of any differences between JMG vs KM2?

Was loving and living on JMEv4, downloading now, thank you for your work sir.
you have made my tab alot more fun to use.
I saw and used an app i believe is free, backup APN, maybe include in the release, make it easy for the noobz....
alot easier then writing down all the info.
and or, some way of using the APN file from CM which im sure is open source and includes like 600 APNs...
just thinking outloud.
It is greatly appreciated.
regards,
Killster

Thanks for your work Rotohammer, works smooth!
I cannot seem to find a Chinese locale, is it availeable in this rom or should I look into other roms for this language? Thanks again!

It's working fine CF-Root for JME break autobacklight... and the eBook reader it's not present in the update can you upload it? Thank you!

rotohammer said:
I haven't tried any ext4 firmwares yet, so I don't actually know. I'd assume you'd have to flash Roto-JMG-Full with the .pit file. I'm sure someone will chime in soon with the answer.
Click to expand...
Click to collapse
I've flashed back to jme full+pit+cfroot with odin1.7 from modaco+ext with no problems, once you've flashed cfroot you can then boot into recovery and directly flash modaco+ext.

Noticeably faster than jmev4 at least as far as I can tell. So far the only thing I am missing is full screen swype.
Sent from my GT-P1000 using XDA App

ondoteam said:
It's working fine CF-Root for JME break autobacklight... and the eBook reader it's not present in the update can you upload it? Thank you!
Click to expand...
Click to collapse
It was in there, but the flash space is tight and it didn't all fit. I'm re-uploading a fixed version, grab the Upgrade file.

Flashed running great, hope to see a ext4 vesion soon!

Great job Roto. Tnx. I was thinking about the next version if it would be possible to include Shutdown.apk from ♫ Overcome v1.0.2 ♫ JMG Base ♫. That one has few more options like: reboot/recovery/download. I think they could be quite useful at least for me.
Thanks.

ondoteam said:
It's working fine CF-Root for JME break autobacklight... and the eBook reader it's not present in the update can you upload it? Thank you!
Click to expand...
Click to collapse
Upgrade went perfect from JMEv4... But as stated, no ebook reader.
Thanks again for your work Roto...
I know i keep asking, but with the RotoBackup, isnt there something you can make, or put in the marketplace? to do all that?
Regards,Killster

killster said:
Upgrade went perfect from JMEv4... But as stated, no ebook reader.
Click to expand...
Click to collapse
I re-packaged the tar file, and now the ebook app works for me. Just re-download the upgrade and reflash it and the ebook will work.
killster said:
I know i keep asking, but with the RotoBackup, isnt there something you can make, or put in the marketplace? to do all that?
Click to expand...
Click to collapse
Im trying, but unfortunately real work has to come first. This may be the last firmware I play with as now we have some other cool ones to choose from.

rotohammer said:
..... This may be the last firmware I play with as now we have some other cool ones to choose from.
Click to expand...
Click to collapse
Wow... Waiting for the other cool stuff from You, Bro.
Take Care.
KC

Anyone tried GPS?
Should be finally fixed!
At least on my Gtab I get a GPS fix in less then 5 seconds (in my room)

There are so many new roms sprouting up lately but I've been putting off flashing anyone of them.... waiting for yours to show up because you are my most trusted!! Flashed the update without any problem, and as usual.... smooth & crispy, so far so good Thanks again Roto!!!!!!

[GUIDE] video tutorials how to flash custom kernels/roms and use ADB for beginners!!

Hi everyone.
Im making some video tutorials for beginners/first time flashers showing how to flash a custom kernel and customs roms etc.
I will upload some more video tutorials soon on how to force download/recovery mode through adb; repair bootloader for 3BR and some more!
As i state in these videos, sometimes its easier to watch how to do something than try and read how to do something and this will collate tutorials into one thread
NOTE: Make sure that you have 3 button recovery mode working before you try and flash anything!
Flash anything at your own risk.
I or anyone else will not be held responsible for any damage done to your phone!
Make sure any lag fixes are turned off!
Full credit goes to the awesome developers whose products i used in these videos!
This video will teach you how to flash speedmod kernel to your stock firmware via odin.
This video will teach you how to install a custom rom (Darkyy's rom used in this tutorial) via CWM recovery. See above video on how to flash a kernel to get CWM recovery onto your device
This video will show you how to install and use ADB, and how to push your phone into recovery or download mode through ADB.
This video will show you how to fix the 3 button recovery mode if your is not working. (See how to use ADB video above to push your phone into download mode).
This video will show you some more features of ADB, such as pushing files/apk's to the device... Pulling files/apk's from the device... deleting files/apk's from the device... How to make a new folder on the sdcard and also how to move files/apk's around the phone using ADB.

Reserved
10 char

nice. i hope this will reduce the question about it.
keep going..
**DamianGTO Steam kernel. 350MB Ram. 500HZ. all ext2. Steam Rom. Js5**

DamianGto said:
nice. i hope this will reduce the question about it.
keep going..
**DamianGTO Steam kernel. 350MB Ram. 500HZ. all ext2. Steam Rom. Js5**
Click to expand...
Click to collapse
Thanks mate,
2 more videos uploaded
As you said hopefully this will save a lot of threads about these questions and collate it all into 1 thread.

zolah said:
Thanks mate,
2 more videos uploaded
As you said hopefully this will save a lot of threads about these questions and collate it all into 1 thread.
Click to expand...
Click to collapse
i will look into them later.
you should write some info on the link to your videos so all can see what they are for.
**DamianGTO Steam kernel. 350MB Ram. 500HZ. all ext2. Steam Rom. Js5**

DamianGto said:
i will look into them later.
you should write some info on the link to your videos so all can see what they are for.
**DamianGTO Steam kernel. 350MB Ram. 500HZ. all ext2. Steam Rom. Js5**
Click to expand...
Click to collapse
Good idea. Ive wrote a brief description of each video. Check them out and let me know what you think mate.
Let me know if you can think of any other video's that may be useful for begginers. I think ive covered all the basics here, but if you can think of any more let me know.

Great work man, I think that video tutorials make things a lot easier, keep her up!!!

mloc33 said:
Great work man, I think that video tutorials make things a lot easier, keep her up!!!
Click to expand...
Click to collapse
Thanks.
Im glad you like it =P

Hi thanx for the tuts. Is it maybe possible u make some kind of "how to" of pushing an apk into the system. That would be great!

oodh said:
Hi thanx for the tuts. Is it maybe possible u make some kind of "how to" of pushing an apk into the system. That would be great!
Click to expand...
Click to collapse
Sure ill make one some time this weekend when i get time.
Dont know when it will be though im pretty busy this weekend.

Great work zolah.
Nice thread.
Tricky103 UltraSlim Essential Rom

oodh said:
Hi thanx for the tuts. Is it maybe possible u make some kind of "how to" of pushing an apk into the system. That would be great!
Click to expand...
Click to collapse
Sorry i havent had time to make the video yet but ill make it asap. I'll make one that shows how to push apk's; pull apk's; delete apk's; create files on the SDcard and list apk's in different directories
Tricky103 said:
Great work zolah.
Nice thread.
Tricky103 UltraSlim Essential Rom
Click to expand...
Click to collapse
Thanks im glad you like it Tricky

oodh said:
Hi thanx for the tuts. Is it maybe possible u make some kind of "how to" of pushing an apk into the system. That would be great!
Click to expand...
Click to collapse
I have posted a new video up on the 1st post showing some more features of ADB... Enjoy

Thanx
zolah said:
Sure ill make one some time this weekend when i get time.
Dont know when it will be though im pretty busy this weekend.
Click to expand...
Click to collapse
Thanx a lot for the latest movie. Really helpful!!!!!!!

Ext4 module

this is ext4 module binary for linux kernel 2.6.35.7 (DXLB1 stock firmware). i build to test my tools (compiler, etc.) and ability to load kernel module from stock kernel. if anyone needed, feels free to take it. working with loop device (not testing yet with real partition but it should be working) with following issue :
1. stock kernel not support "huge_file" feature witch is enable by default by mkfs.ext4. make sure to disable it
2. auto detect filesystem in mount command not working because wrong auto detect order. use"-t ext4" param
3. file size is big. not sure fit in initramfs (not investigate yet)
load module with insmod, jbd2.ko first and then ext4.ko.

news
irfan was mentioned in Portal:
:good::good::good: http://www.xda-developers.com/android/huawei-ideos-s7-gets-a-dual-boot-kernel/ :good::good::good:

I dont think it will be able to boot the phone because of the large ramdisk. In that case you need to compress it using lzma
Sent from my GT-S5360 using XDA

@mai77
thanks for your info
hell_lock said:
I dont think it will be able to boot the phone because of the large ramdisk. In that case you need to compress it using lzma
Click to expand...
Click to collapse
this is old thread, my first trial to build loadable module for sgy. few hour after create this thread i find the problem. it's still contain debug info which easily remove using "strip" command. final result is few hundreds kilobyte uncompressed.

irfanbagus said:
@mai77
thanks for your info
this is old thread, my first trial to build loadable module for sgy. few hour after create this thread i find the problem. it's still contain debug info which easily remove using "strip" command. final result is few hundreds kilobyte uncompressed.
Click to expand...
Click to collapse
Welcome back sir...
Are u still use SGY?
Waiting ur work sir..
Sent from my GT-S5360 using xda app-developers app

shoutokuyaki said:
Welcome back sir...
Are u still use SGY?
Waiting ur work sir..
Click to expand...
Click to collapse
back from where ?
i'm still read this forum almost everyday
unfortunately not, i already give it. maybe will do little hacking next week because my girlfriend complain about battery life (still in stock rom/kernel).

irfanbagus said:
back from where ?
i'm still read this forum almost everyday
unfortunately not, i already give it. maybe will do little hacking next week because my girlfriend complain about battery life (still in stock rom/kernel).
Click to expand...
Click to collapse
Are you sure bro, having time next week??
Girl complain is powerfull reason to uprek2 "hack" again.. Unfortunately for me only have 2-3days/month with my little young and hard to doing something..

[ROM][.45][OC]PowerXperia

Ok, I really should contribute to the community somehow So I decided to fix any little problem in my rom i'm currently using and release it, so people like me, that means people who like clean and tidy ROMs with some extra horsepower under the hood and few tweaks that increases usefulness of their device a bit will have their life a little bit easier because I'll try to implement as much awesomeness without unnecessary bloatware to this ROM and learn a bit about modding in the process
And I proudly present you PowerXperia ROM for Xperia S
It's based on official .45 ROM, with following changes:
StatusBar toggles
Percentage battery mod
^ these two were one mod, p3001ee's statusbarmod with quickpanelsettings.
krabappel2548's XperiaSSpeed Kernel V6 with stock bootlogo and "Xperia" background in recovery
serajr's xperia s customizable home launcher
ROM is debloated and some handy apps are included
Click to expand...
Click to collapse
Known issues & TODO:
- When lockscreen disabled and waking up phone with camera button, blank form appear that is canceled by any action. This is caused by Camera app.
- AROMA installer - honestly, i am aware that apps I use aren't apps that everyone want to use
Click to expand...
Click to collapse
Feel free to post suggestions/critic/bug reports/giving thanks etc.
Feel free to mirror, just let me know, ok?
DISCLAIMER: I am not responsible for any damage caused to your phone. You are using this at your own risk, and if you are not willing to take it, do not proceed. Please read carefully all the information below, It's wise to prevent problems...
Installation process:
This is currently standard recovery flashable ZIP file. If you do not have access to recovery you may want to read this thread: http://forum.xda-developers.com/showthread.php?t=1793272 there are several ways how to boot into recovery, you may use any method, the recovery will be reflashed anyway. This rom also requires unlocked bootloader.
1) Place installation package anywhere on your internal card.
2) Boot into recovery (usually with pressing vol up button when prompted by kernel)
3) Select install zip from sdcard.
4) Select choose zip from sdcard
5) Find installation package on SD Card and confirm installation
6) Wait until updater finishes his job and wipe cache partition or (optional) perform hard reset.
7) Profit
Click to expand...
Click to collapse
First boot takes a lil bit longer, don't be scared
DOWNLOAD:
Uloz.to
uploaded.to
(will add some more mirrors soon)

reserved

ladynaamah said:
Ok, I really should contribute to the community somehow So I decided to fix any little problem in my rom i'm currently using and release it, so people like me, that means people who like clean and tidy ROMs with some extra horsepower under the hood and few tweaks that increases usefulness of their device a bit will have their life a little bit easier because I'll try to implement as much awesomeness without unnecessary bloatware to this ROM and learn a bit about modding in the process
And I proudly present you PowerXperia ROM for Xperia S
It's based on official .45 ROM, with following changes:
Known issues & TODO:
Feel free to post suggestions/critic/bug reports/giving thanks etc.
Feel free to mirror, just let me know, ok?
DISCLAIMER: I am not responsible for any damage caused to your phone. You are using this at your own risk, and if you are not willing to take it, do not proceed. Please read carefully all the information below, It's wise to prevent problems...
Installation process:
First boot takes a lil bit longer, don't be scared
DOWNLOAD:
Uploading in progress... stay tuned
Click to expand...
Click to collapse
Good to have another rom... But this is more like a combination of some mods that you have done on your stock rom with krabe's kernel and made it a power rom...
Anyways one new rom for us.. Cheers
Edit : you already told these in the beginning.. My bad
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium

exciting stuff!! Btw, is it overclocked by default??

Harsh7689: The point of this ROM is to ease the effort patching it up to others with similar requirements from their device. I've not said that I have done something special, I don't know java and I know very little from bash and other scripting... only thing I've learned up to today is to find a mod, test it and if it works well use it until i find better. This is my little I can do for the community... Maybe I'll learn from this baby-in-sandbox project something that will allow me to do a bit more for community than this... I agree, it's nothing much fancy, but it might help someone, that's why I posted it here.
imrock: It's kernel is krabappel2548's XperiaSSpeed Kernel V6, so yes, it is overclocked by default and can be overclocked up to 1899 MHz, which me personally finds quite hazardous Anyway default overclock is somewhere around 1,7 GHz which is safe value The package also contains Voltage Control free edition, which will allow you to alter those values to your taste

ladynaamah said:
Harsh7689: The point of this ROM is to ease the effort patching it up to others with similar requirements from their device. I've not said that I have done something special, I don't know java and I know very little from bash and other scripting... only thing I've learned up to today is to find a mod, test it and if it works well use it until i find better. This is my little I can do for the community... Maybe I'll learn from this baby-in-sandbox project something that will allow me to do a bit more for community than this... I agree, it's nothing much fancy, but it might help someone, that's why I posted it here.
imrock: It's kernel is krabappel2548's XperiaSSpeed Kernel V6, so yes, it is overclocked by default and can be overclocked up to 1899 MHz, which me personally finds quite hazardous Anyway default overclock is somewhere around 1,7 GHz which is safe value The package also contains Voltage Control free edition, which will allow you to alter those values to your taste
Click to expand...
Click to collapse
Truly said +1
I know this that's why I thanked you first thank of the rom
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium

Glad you agree uploaded.to mirror nearly ready. Will add it to first post By the way, thanks for thanks

after desperate messing with aroma installer i have another idea how to contribute to community tool that generates aroma scripts

What is the difference between this "ROM"and the other ones like Eratcher and DualCore "ROMS"

It is supposed to be as much stock as possible, while getting some extra functionality, to be honest, i'm not keen using AOSP - themed rom, if i would want to, i'd bought galaxy nexus... i've bought xperia cause i like it's design... by the way, being arrogant and rude is not the best way how to support someone trying to learn something...

Could you send me the kernel only, if possible?
Sent from my LT26i with Tapatalk 2

Felimenta97 said:
Could you send me the kernel only, if possible?
Sent from my LT26i with Tapatalk 2
Click to expand...
Click to collapse
Try the search function...you will also see the kernel dev does not want people mirroring his work...
http://forum.xda-developers.com/showthread.php?t=1761778
Sent from my Xperia S using Tapatalk 2

geekygrl said:
Try the search function...you will also see the kernel dev does not want people mirroring his work...
http://forum.xda-developers.com/showthread.php?t=1761778
Sent from my Xperia S using Tapatalk 2
Click to expand...
Click to collapse
i think he(Felimenta97) is asking for the kernel because ladynaamah has the ka kernel with default sony logo.

You may extract zImage file from archive and flash it via fastboot using command
Code:
fastboot flash boot zImage
provided you have connected your device in fastboot mode
geekygrl: I'm aware of that, but what shall i do? Type here guide how to extract it, modify it, repack it and flash it separately? That's not making much sense, would excessively complicate process that is supposed to be simple...

mharckk said:
i think he(Felimenta97) is asking for the kernel because ladynaamah has the ka kernel with default sony logo.
Click to expand...
Click to collapse
Yeah, exactly. Im using SSpeed v6 right now, but those small customizations seems nice.
ladynaamah said:
You may extract zImage file from archive and flash it via fastboot using command
Code:
fastboot flash boot zImage
provided you have connected your device in fastboot mode
geekygrl: I'm aware of that, but what shall i do? Type here guide how to extract it, modify it, repack it and flash it separately? That's not making much sense, would excessively complicate process that is supposed to be simple...
Click to expand...
Click to collapse
Thanks. I asked for it only as I didn't wanted to download the entire Rom, but I will do it. Thanks
Sent from my LT26i with Tapatalk 2

sorry i can't be of more help currently, I'm at the work right now

Does anyone have the same problem ?
Icon position seems wrong

KennyCHF said:
Does anyone have the same problem ?
Icon position seems wrong
Click to expand...
Click to collapse
Lol funny screen
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium

KennyCHF: It appears on my device too, I'll look into it...

ladynaamah said:
KennyCHF: It appears on my device too, I'll look into it...
Click to expand...
Click to collapse
Thanks ~ wait for your good news ~~~