Related
HI,
I upgraded to 1.93 also...
A new problem that I have is in the contacts tab - when I want to add a new favorite, if that contact has more than one number or details.
it shows me error msg. with Manila.exe.
Anyone else has this problem ?
Anyone knows what to do ?
another things :
1. Wake up on new sms ?
2. screen off - after recieving a call ?
3. loading app. time ( new sms ) a bit laggy ?
4. Pulling staylus - has no effect ( yes it is marked to do it in the options ).
5. how can I check if the 850 band was added ?
Thanks
Itay
DISCLAIMER:
I WILL NOT BE HELD RESPONSIBLE IF YOU BRICK YOUR PHONE AFTER FOLLOWING THIS GUIDE. BUT I ASSURE YOU THAT THESE FIRMWARES HAVE BEEN PERSONALLY TESTED BY ME AND WORKS WITHOUT ANY HINDRANCE!!!
COPYRIGHT NOTICE: ;D ;D ;D
If anyone wishes to share my work with other users on other forums, they are free to do so under the condition that they credit me in their post and if possible link to my post here.
Thank You.
***************** THE FIRST MODIFIED INDIAN FIRMWARES ******************
****************************** ENJOY ********************************
A very good afternoon to all fellow wavers!!! ;D ;D ;D I am finally done with my exams and have finished the modification to the Indian bada 1.2 (DDKD1) and bada 1.0.2 (DDJI2). ;D ;D
NOTE: For some features to work, you will have to first flash to the modified DDJI2 and then flash to DDKD1. SO I advice everyone that they flash DDJI2 (1.0.2) first. Thank you for your understanding.
Firmwares Included:
1. Modified DDJI2.
2. Modified DDKD1. Only includes the CSC and PFS files, since they are the ones which were modified. So first you will need to download the actual DDKD1 from here: http://rapidshare.com/files/459305949/DDKD1.rar (THANKS TO ROHIRRIM ) and then replace the CSC and PFS files with the files I am uploading. Sorry for the inconvenience, but my net sucks.
For those who want CALL RECORDING, I am separately uploading two files: apps_compressed.bin and a CSC file. NOTE: If you flash these two files, you will have call recording, but you won't be able to update with kies anymore. Kies will show your firmware as S8500JVKC1/S8500ODDKD1. So the choice is yours. For more detailed explanation on how to get call recording keep reading.
Links to the files:
Modified DDJI2 - http://www.multiupload.com/1P61TNH9U0
Modified DDKD1 - http://www.multiupload.com/GMBM6PPQBY
NOTE: You will need 7-zip to extract files. Its free. You can google for it. Thanks.
CHANGE LOGS:
1. Bada 1.0.2 - DDJI2:-
a. The default browser bookmarks are now editable and can be deleted.
b. Social Hub Premium
c. Max MMS size is now 600 KB.
d. Faster GPS. (Lock within a minute under clear sky. ;D)
e. Now max receiver address for messages is 100. (In original DDJI2 it was 50.)
f. Faster booting. About 10 second faster switch on and about 5 sec faster switch off.
g. The default and only CSC region is India. So no need of pre-configuration worries.
h. Deleted all the pre-installed java apps.
i. Included Utalk java locked app with background running and push notifications.
j. Changed Java heap sizes for better java app performance.
k. Increased media player, music player, recorder and VOICE CALL volumes.
l. Deleted the pre-loaded images except the default theme background image,
m. Flash and ad-blocking is now enabled as default.
n. Improved the Secondary Camera (Front Camera) recording quality and increased it's framerate.
o. Increased the youtube streaming bitrate while on wifi.
j. Includes ASPHALT 5 (v1.1.1)
2. Bada 1.2 - DDKD1
a. All the features of Bada 1.2.
b. Support for Youtube 3d.
c. All the features mentioned in DDJI2.
For Social Hub Premium with bada 1.2:
If you want to enjoy Social Hub Premium on DDKD1, you need to first flash to DDJI2. Or else it won't work.
For Call Recording:
For call recording, you will need to flash to the modified DDJI2 and then the modified DDKD1. After that you will need to flash only the apps_compressed.bin file, link to which I am posting below. BUT AS I SAID EARLIER, if you want call recording, YOU CAN'T UPDATE USING KIES ANYMORE.. Your firmware will now look as: S8500JVKC1/S8500ODDKD1 (INU). This is because the apps_compressed.bn is fro the Turkish firmware. I have also included the Turkish CSC file with Indian pre-configuration. So if you wish you can flash the CSC file too to change your CSC version also to TURKISH one.
Download link:
apps_compressed.bin: http://www.multiupload.com/T7E7ZMRKWU
CSC file: http://www.multiupload.com/JI63RFB4YM
HOW TO FLASH:
Here is a video guide on how to flash, made by an user from this forum: Samsung Wave Flashing Guide
I have also attached a pdf guide to this post. The guide is from samfirmware.com. Remember not to check bootchange in multiloader even though the pdf guide asks you to do so.
WHAT TO DO IF AN ERROR COMES UP DURING FLASHING:
If during flashing, multiloader show an error like "Error: apps write" or "Errror: Rc1 write" or aything else for that matter, do not panic. First thing to do is press port search again and re-download the whole firmware again. If the error shows again, close multiloader, remove your phone from the usb, turn it off and then go back to download mode again. Open multiloader and then connect your phone. Then browse for the firmware files again, press port search and press Download. This time it should work without errors.
WHAT TO DO BEFORE FLASHING:
Before each flash, it is recommended that you do a hard reset. Type in "*2767*3855#" without quotes onto the keypad. Remember to take out the sim card and memory card before doing a hard reset. Also remember to backup all the stuff stored on the phone since the hard reset and flashing process wipes away internal memory.
WHAT TO DO AFTER FLASHING:
After each flash do a hard reset again. After the final flash, followed by a hard reset, do the following:
1. Pre-configuration:
Although the Pre-Configuration is already set to INU, and even though there are no other Pre-Configuration options, it is recommended to do the Pre-config process.
How to proceed:
Type in "*#5239870*#" without quotes. Select Pre-configuration. Type in the following in the password field without quotes: "*#27236*#" an press confirm. You will only see INU and it is already selected but it is better to select it again. NOTE: This process is similar to a hard reset. So remove sim and memory card.
2. Voice quality
Enter *#197328640#
1. Choose "[5] Audio"
2. Choose "[1] CP Config"
3. Choose "[1] RCV Config"
4. Choose "[7] Rx AGC"
5. Set "[0] enable flag" to 0 (both read and write)
Repeat step 3 with 2/3/4 (EAR/SPK/BTH).
3. Battery Callibration:
Type "*#0228#" without quotes. Then charge your phone until the top three parameters are 100%. If charging stops in between, unplug charger and then plug it again. Do this until you get 100% on all three.
4. Camera Update: (VERY RISKY!)
If you want to see the camera improvements I mentioned, please follow his step. But this process is very risky.
Caution: Do this very carefully. Make sure you are not out of battery before you proceed.
1. Enter *#36287#
2. Press 3
3. Wait for 4 minutes!! Do not touch your phone during the update process. Do nothing until it says that update is complete!!!
FOR SOCIAL HUB PREMIUM WITH FACEBOOK AND ICQ:
The default Social Hub premium only supports Yahoo, MSN and Google. If you want facebook and ICQ follow the guide in these two websites:
http://www.bada-blog.de/2011/02/17/anleitung-icq-account-mit-dem-google-talk-account-verknupfen/
http://badanation.de/topic.php?t=3313
NOTE: The websites are in German. So use google translate. If someone from this forum who is a native German and could translate the guide for us, it would be great! ;D ;D
Hope everybody has a great time ;D ;D ;D ;D ;D ;D
d. Faster GPS. (Lock within a minute under clear sky. ;D)
Click to expand...
Click to collapse
how did you do this??
thanks in advance
haha, ...
For faster gps there is some ini file to be editrd
change some adress to supl.google.com
i forgot what those "some" is
kadavil said:
For faster gps there is some ini file to be editrd
change some adress to supl.google.com
i forgot what those "some" is
Click to expand...
Click to collapse
hahahahaha
that change kills gps on bada 1.2
also it doesn't make it that much fast to drop down the time from 7-10 min to 1min
anyway thanks for telling
1. You say you have deleted the pre-loaded images, what about audio files?
2. Does your firmware allow Facebook to update via Samsung Apps for Facebook chat?
3. How about adding Answering Machine to the firmware?
no it doesnt :O
my gps works perfectly after changing those settings, its really fast and very accurate
@ TC can u increase the sms memory because it sux only 1300 sms memory dude
For a faster gps, I edited the ini files to enable auto download, data receive type from 2 to 1, device type to 1 from 3, enabled magnetic sensor and enabled ULTSon. Also there is a gps property in the csc file which you can change to s-gps (simultaneous gps).
And these settings do not harm the gps in anyway and its blazing fast on the Indian firmware at least.
The message memory setting is somewhere deep in the system files which are heavily protected. Most probably they are one of the .so file in the ShpAPP dump.
sinstoic said:
1. You say you have deleted the pre-loaded images, what about audio files?
2. Does your firmware allow Facebook to update via Samsung Apps for Facebook chat?
3. How about adding Answering Machine to the firmware?
Click to expand...
Click to collapse
1. I have deleted the pre-loaded images except for the default theme image. I have also deleted most of the ringtones save a few and also deleted the alert tones which are not used as default by the phone.
2. Yes, the facebook app can be updtaed.
3. I didn't understand what you meant here??
Does this custom rom support launching of spoofed apps from menu...
Some Bada Firmware has answering machine. This saves quite some money by avoiding operator voicemail service.
m90ultimate said:
Does this custom rom support launching of spoofed apps from menu...
Click to expand...
Click to collapse
The DDJI2 (Bada 1.0.2) firmware I posted, does support spoofing from menu. That's because it's an older firmware. However DDKD1 (Bada 1.2) doesn't support spoofing.
GPS+
Hello Astrotom forgive my bad English.
I would like clarification on the GPS function +, if you've made the changes you can make all the FW?
Can you explain how?
In all the firmware I tested the GPS + does not work.
I confirm with you that your firmware when you enable GPS + downloads work data and the 3G icon blinks and turns red?
Then you find the kb downloaded packet data?
DDKD1 carcked games r working?
can u make lockscreen as bada 1.2
did any body experienced JPJH1 middle eat version 1.02.It has buit in ans macine along with call rec. only SHP is not there. Can we extract the app frow th FW n install in ddkd1 or ddjI2.. Thank you for the gr8 work
masterdex said:
Hello Astrotom forgive my bad English.
I would like clarification on the GPS function +, if you've made the changes you can make all the FW?
Can you explain how?
In all the firmware I tested the GPS + does not work.
I confirm with you that your firmware when you enable GPS + downloads work data and the 3G icon blinks and turns red?
Then you find the kb downloaded packet data?
Click to expand...
Click to collapse
Yes. The gps+ setting works for me. The 3G icon turns red and downloads the satellite data valid for 168 hours or so. And once you download that data, you never need to worry about gps locks as long as you are outdoors. You will get a alock within seconds there on. However if you disable location services, the data will have to be downloaded again and it may take a minute or two.
Good
astrotom said:
Yes. The gps+ setting works for me. The 3G icon turns red and downloads the satellite data valid for 168 hours or so. And once you download that data, you never need to worry about gps locks as long as you are outdoors. You will get a alock within seconds there on. However if you disable location services, the data will have to be downloaded again and it may take a minute or two.
Click to expand...
Click to collapse
Thank you for responding.
It would be good that you've done as you communicate to Samsung, because they still were not able to activate the GPS service +.
I do not doubt your words, but I want to be sure before risking overwriting.
I think this is one of the biggest bugs Bada.
Important The below codes are not for noobs. If you by-chance brick your phone. I am no-where responsible. You can regain your firmware by flashing it to the phone. That is no Problem
Note-P.S- All the codes can be entered using the dialer...The code will be executed after you enter the last # ( i.e. if you just enter the codes below, it will execute it without permission
*2767*3855#
Think twice before you use this code. It is a Factory reset code. This will wipe off all your data be it in the internal memory or the external memory. I advice you people to use this code with the External SD card and the SIM removed.
Once you have entered this code, There is no way you can stop it.
*#197328640#- This code is used to enter the Service mode. You can change settings here and run some tests. Any changes except for the camera part will no crash your FW.
*#0228#- This code gives you information about your phone battery.
*#7465625#- This code can be used to check the status of SIM lock, Network LOCK,etc.
Codes to get Firmware Version Information
*#4986*2650468# - SW Version, HW Version, MP, RF Cal Date, CSC Version, CSC Model Spec, FFS Version, RC2 Version
*#1234# - SW Version and CSC Version
*#1111# - FTA SW Version
*#2222# - FTA HW Version
Wi-Fi and Bluetooth testing codes
*#526# - Wi-Fi Manual MFG Test Mode
*#232337# - BT RF Test Mode
Code to launch various factory tests
*#0*# - LCD test
*#0673# OR *#0289# - Melody test
*#0842# - Vibration test
*#2663# OR *#2664# - TM Command
*#4097*4097# - GPS menu
*#272*time* - csc pre configuration
example *#272*1423* ( if the time is 14:23)
*#0002*28346# - Another service menu
*#0228#- Battery test
*#232337#- Bluetooth addrs
*#5239870*# - Admin settings
*#66225*# Motion Calibration
PS- Many users have complained that the motion sensor calibration code is resulting in the incorrect functioning of the Accelerometer. If you encounter such a problem or if you want to use the Motion sensor Calibration code, Please be sure to place the phone on a flat surface and wait for about a minute!
And tell me how you like it!
Nice post. The code for the battery is very helpful, since I cannot find an app that displays the percentage, like in android.
emiok said:
Nice post. The code for the battery is very helpful, since I cannot find an app that displays the percentage, like in android.
Click to expand...
Click to collapse
.. Settings - About your phone (or Info .. I don't know how is write in English) - System Info - Battery ...
Fahrenheit51 said:
.. Settings - About your phone (or Info .. I don't know how is write in English) - System Info - Battery ...
Click to expand...
Click to collapse
Ya.. but i don't think it is so informative..As mentioned, it is like the battery info on Android Settings...!!
*#0*# = full test menu
*#272*time* = csc pre configuration
example *#272*1423* ( if the time is 14:23)
roxyroot said:
Ya.. but i don't think it is so informative..As mentioned, it is like the battery info on Android Settings...!!
Click to expand...
Click to collapse
what do you mean? I shows me about 73% and bada under settings tell me 74% maybe its uprounded...
And what is the real data? Bat RAW SOC or BAT adjusted SOC?
Thx to op for this thread...
Very useful, thanks!
Dont forget the gps menu -
*#4097*4097#
edit : this does not work in BADA 2.0.1
The bada 2.0 equivelent is *#3214789650# (for versions prior to PKH2 this needs the phone in MID debug level)
Samuel Sung said:
what do you mean? I shows me about 73% and bada under settings tell me 74% maybe its uprounded...
And what is the real data? Bat RAW SOC or BAT adjusted SOC?
Thx to op for this thread...
Click to expand...
Click to collapse
adjusted SOC
duxxyuk said:
Dont forget the gps menu -
*#4097*4097#
Click to expand...
Click to collapse
Man! Thanks for reminding! I wrote it down..But forgot to put it on!
roxyroot said:
Man! Thanks for reminding! I wrote it down..But forgot to put it on!
Click to expand...
Click to collapse
Heh, if you want to live dangerously (newbies - stay WELL CLEAR) it's possible with certain firmwares to unlock the master debug mode :
Unlock debug by dialing *#33284*# then choosing mid or high. The phone will then reboot.
It is now possible to dial up the debug menu by dialing *#7092463*#
Do be aware that the debug modes will slow down your phone as this activates a second serial port to which loads of information is being dumped... I's been very useful for the bootloader work.
All the best ~D
duxxyuk said:
Heh, if you want to live dangerously (newbies - stay WELL CLEAR) it's possible with certain firmwares to unlock the master debug mode :
Unlock debug by dialing *#33284*# then choosing mid or high. The phone will then reboot.
It is now possible to dial up the debug menu by dialing *#7092463*#
Do be aware that the debug modes will slow down your phone as this activates a second serial port to which loads of information is being dumped... I's been very useful for the bootloader work.
All the best ~D
Click to expand...
Click to collapse
i didn't know that! ( It is not the Nat Geo show!)
*#66225*# Motion Calibration
sitcoms said:
*#66225*# Motion Calibration
Click to expand...
Click to collapse
Woah, that's the one that had me RE-calibrating my phone whilst holding it at 45° to the right with the top touching the floor and the bottom about 2cm's off the floor .
If your accelerometer works... DON'T fix it
^
just put the phone on a flat surface then calibrate it
sitcoms said:
^
just put the phone on a flat surface then calibrate it
Click to expand...
Click to collapse
This doesn't work at all times if the sensor itself is not placed properly in the device. I too had to calibrate it with the phone at odd angles to perfect the sensor. Now the accelerometer works absolutely fine.
After changing files with sTune should i send *2767*3855# for factory reset? Is this correct? Thanks!
Thanks man! You rock! Wanted some of these!!
@Gremo What files are you changing and why? If you want the hard reset, just go to the dialer and type "*2767*3855#", it will conduct the reset automatically!
@dancegirl You are welcome!
Hi All
I have Oppo Reno 6 pro 5G, the Snapdragon Version, model # CPH2247, for some reason the Wifi calling option doesn't appear in the setting, also the Volte feature doesnt appear, can someone tell me how to force them to appear? as I know the guys in India has this option in their setup menu
Follow the steps -; Settings>Mobile network>Select sim (1/2)> wifi calling > enable then wifi calling prefrence . Select and enjoy
But for some reason, I don't have the wifi calling option at all so I can't enable what doesnt exist
is there a way to make it appear
Can you visit to nearest Oppo Service Center and they'll install a new software in it.
NOTE :- Please take a backup before.
Hi, did you resolve it? I have the same problem
beesh2021 said:
But for some reason, I don't have the wifi calling option at all so I can't enable what doesnt exist
is there a way to make it appear
Click to expand...
Click to collapse
Hi, did you resolve it? I have the same problem
Hi all,
New to Realme, I've only really dealt with more mainstream devices here in the UK (Samsung/Sony/Motorola etc)
I have a TIM Italy branded C21 - RMX3201 that I was hoping to remove the branding for a 'Global/EU' SIM free variant of firmware. First question does anyone know if its possible? or has done it? with it being a MTK chipset will it be a SP Tool flash as other devices with their chipsets (CAT, some Motos etc?)
Build - RMX3201_11_A.36
Baseband - M_V3_P10,M_V3_P10
Kernel 4.9.190
Color OS - V7
Android 10
Any help would be gratefully received
Laird_Attwood said:
Hi all,
New to Realme, I've only really dealt with more mainstream devices here in the UK (Samsung/Sony/Motorola etc)
I have a TIM Italy branded C21 - RMX3201 that I was hoping to remove the branding for a 'Global/EU' SIM free variant of firmware. First question does anyone know if its possible? or has done it? with it being a MTK chipset will it be a SP Tool flash as other devices with their chipsets (CAT, some Motos etc?)
Build - RMX3201_11_A.36
Baseband - M_V3_P10,M_V3_P10
Kernel 4.9.190
Color OS - V7
Android 10
Any help would be gratefully received
Click to expand...
Click to collapse
Hi, in fact i have no idea.
I believe you can get an aswer from realme community servers, i will sent you discord and reddit links of them.
Remember that, this community groups has no staff from realme.
Yes it can be done. Will be able to find details here in XDA, it is engineernetwork mode and I believe it's changing or unlocking country codes/network.
Is simple enough to do, will put a care package together and instructions. It's same process for all realme/oppo. Just not in front of my computer at moment
@Laird_Attwood
1 Activate developer mode
2 Enable usb debugging
3 Download Oppo_Free_Unlock_v1.0.zip file from xda
4 In Windows 10 device property management - NETWORK ADAPTER - THEN UNDER ADVANCED - "network Address" entered code: 3497F6990DEA7 - IF THIS DOES NOT WORK - THEN ADD NEW LEGACY HARDWARE - NETWORK ADAPATER - MICROSOFT - KM-TEST LOOPBACK AND THEN REEPEAT ABOVE NETWORK ADDRESS FOR KM-TEST ADAPTER
5 Connect Find X2 Pro is in MTP
6 Open file "Oppo_Free_Unlock_v1.0.zip"
7 Open Sec5.exe
8 Click unlock
9 Number on the left and ok on the right
10 Click Stop unlock
11Closed Windows Sec5.exe
12 Disconnect Oppo
13 Open dialer anc type * # 3954391 #
14 "Switch" appears for a moment
15 Enter * # 391 #
any troubles flick me a message or reply
smiley.raver said:
@Laird_Attwood
1 Activate developer mode
2 Enable usb debugging
3 Download Oppo_Free_Unlock_v1.0.zip file from xda
4 In Windows 10 device property management - NETWORK ADAPTER - THEN UNDER ADVANCED - "network Address" entered code: 3497F6990DEA7 - IF THIS DOES NOT WORK - THEN ADD NEW LEGACY HARDWARE - NETWORK ADAPATER - MICROSOFT - KM-TEST LOOPBACK AND THEN REEPEAT ABOVE NETWORK ADDRESS FOR KM-TEST ADAPTER
5 Connect Find X2 Pro is in MTP
6 Open file "Oppo_Free_Unlock_v1.0.zip"
7 Open Sec5.exe
8 Click unlock
9 Number on the left and ok on the right
10 Click Stop unlock
11Closed Windows Sec5.exe
12 Disconnect Oppo
13 Open dialer anc type * # 3954391 #
14 "Switch" appears for a moment
15 Enter * # 391 #
any troubles flick me a message or reply
Click to expand...
Click to collapse
I have tried this on the Oppo Find X3 Pro its found the digits in the left side of the program but wont unlock can you look in to this please ?
Disconnect your ethernet adaptor, then once km test loopback has connect as a network , then re enable the ethernet cable. Or use your mobile phone as a tethering to your computer or a wifi adpater and it will go through