Related
Hello All,
I have just joined the forum and need help from all senior members
I am from pakistan and have LG G2.(LS-980 -Sprint) running at Kitkat 4.4.2, Kernal Version 3.40 Software Version LS980ZVD
I am facing some issues in using this cell.
1. When i try to connect cell with laptop using LG Mobile Support Tool, i can not find the option in Setting >USB Connection > PC Software option in cell phone.
2. I am not able to check the update of Frimware , it gives the authentication error when i try to check for update.
Can any one please help me in solving these problems.. i am again mentioning that i am using this cell in Pakistan and it is unlocked to all networks.
Regards
Adnan
if your already on ZVD, then your on the latest already
jcwxguy said:
if your already on ZVD, then your on the latest already
Click to expand...
Click to collapse
there is one other issue, i can not configure internet setting for cellular network provider. why it is so..? neither i can go for 4g setting,. not allowing me to add APN etc . can you guide me how can i configure internet setting, i am attaching screenshot of the same. i really need to solve this thing. help me out
adnannaveed said:
there is one other issue, i can not configure internet setting for cellular network provider. why it is so..? neither i can go for 4g setting,. not allowing me to add APN etc . can you guide me how can i configure internet setting, i am attaching screenshot of the same. i really need to solve this thing. help me out
Click to expand...
Click to collapse
flash cm11 or 2faced rom and see if it has that option
or follow this guide
http://forum.xda-developers.com/showthread.php?t=2655133
jcwxguy said:
flash cm11 or 2faced rom and see if it has that option
or follow this guide
http://forum.xda-developers.com/showthread.php?t=2655133
Click to expand...
Click to collapse
please guide me how to do that.. or give me some link or thread so i can view the process. thanks
I saw that my.phone isn't necessarily listed as being able to support volte but I did see that users said they got it working. I have a bullhead running oreo and when I run *#*#4636#*#*, there is
Mods delete please. I resolved my issue .
Hello all together,
I wondered why VOLTE was not working here in Germany with Vodafone carrier. So I tried older solutions.
Here is what worked for me:
Install new Oneplus Logkit:
https://www.apkmirror.com/apk/oneplus-ltd/onepluslogkit/onepluslogkit-1-0-release/
Android 9 version also works on Android 10.
Found the helping post at https://forum.xda-developers.com/showpost.php?p=79577939&postcount=23
Then do the following
Open the dialer: *#800# --> oneplus Logkit --> Function Switch --> enable VoLTE + VoWifi switch
found at https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
After reboot VOLTE was instantly on and working.
Aa always: Do at your own risk. I am not repsonsible for bricked HW, nuclear war and alien invasions :cyclops:
Cool, thank you for sharing. I use Vodafone here in Germany as well and was wondering why it didn't work.
I have the volte icon , how do I know if I'm using it ?
hightech316 said:
I have the volte icon , how do I know if I'm using it ?
Click to expand...
Click to collapse
Make a call and try and use the internet at the same time. No data on call? No VoLTE.
Everything working good so far, provider Orange in Poland, thanks for sharing. [emoji1308]
Wysłane z mojego HD1903 przy użyciu Tapatalka
Still unable
I have tried the logkit app and successfully enabled but still while making call the icon drops to H or 3G. and also by dialing *#*#4636#*#*, still the icon for VoWIFI and VoLTE provisioned are shown enabled but grayed out.. Any solutions ? I am from Malaysia and my both 2 telco has enabled the service on my sim and already tested using huwaei p20 pro. only This OP 7T does not have the feature.
dearshakya said:
I have tried the logkit app and successfully enabled but still while making call the icon drops to H or 3G. and also by dialing *#*#4636#*#*, still the icon for VoWIFI and VoLTE provisioned are shown enabled but grayed out.. Any solutions ? I am from Malaysia and my both 2 telco has enabled the service on my sim and already tested using huwaei p20 pro. only This OP 7T does not have the feature.
Click to expand...
Click to collapse
Same here. Your OP7T is China or global set?
dngff said:
Same here. Your OP7T is China or global set?
Click to expand...
Click to collapse
same using china set
In order to get VoLTE and VoWiFi working with Orange in Belgium, I followed this guide :
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
To access Engineering Mode I had to install it from apkmirror, then it's accessible by dialing *#801#.
https://www.apkmirror.com/apk/onepl...-0-171117173719-25c8842-android-apk-download/
Serial causes fc, but full-port switch works and it's enough.
Thanks for this post. I recently upgraded from OP6 to OP7T and lost the VoLTE + Wifi calling on the OP7T - I am on Vodafone UK.
I did the stuff in the first post and after the reboot the VoLTE logo appeared and the additional options under SIM settings.
I have a poor Vodafone signal at work - so this really makes a difference for me,.
Thank you!
Silly question but do I need to / should I uninstall the apk after enabling VOLTE?
Thanks
Successfully enabled
dngff said:
Same here. Your OP7T is China or global set?
Click to expand...
Click to collapse
China set but currently using global oxygen os. and also i have successfully enabled volte and vowifi and testing for 1 week. so far ok. i follow the video tutorial provided below.
www(#)youtube(#)com/watch?v=X11kw0z7U_E&t=427s
While using "India-vodafone commecial" profile and others, i faced one issue, "unable to receive calls from other number to my oneplus 7 volte enabled sim:crying:.. for example sim 1 i am using "UNIFI" and sim 2 i am using "DIGI". from both num i was able to make call but sometime unable to receive call. i suspect this was due to different country profile settings. To solve the issue, i have used "Telefonica-UK-Commercial" and now the issue is gone:good::good::laugh:.
the file link also provided below:
www98(#)zippyshare(#)com/v/cOKFso6s/file(#)html
One thing also i want to share, when we change the sim, we need to setup the profile again using PDC app. This thing is bit irritating.
sorry but due to i am new user for the forum, the forum does not allow me to post the external link on my post. so PLEASE replace " (#) " with " . " (dot) from the link and try to open the link.
I left it on the phone for future purpose. It is a system app which just was updated.
harryw66 said:
Silly question but do I need to / should I uninstall the apk after enabling VOLTE?
Thanks
Click to expand...
Click to collapse
Did anyone notice battery life diffrence after doing this? I'm not talking about normal diffrences causign by the volte actualy working, but strange -1h battery life after only enabling the volte vowifi switches from the onepluslogkit
So mad because most of the profiles in PDC arent giving me VoLTE. Is rooting the phone would solve this issue?
Qualcomm drivers for Oneplus 7T
Hello, guys...
Maybe someone could send a link for the qualcomm drivers for Oneplus 7T? Because all links in the thread are not working..
I have managed to install PDC in QPST in my laptop, but there is no driver shown...
I believe it is before I have the wrong Qualcomm drivers...
Any ideas or help?
Thanks in advance[/QUOTE]
KostisTTT said:
Hello, guys...
Maybe someone could send a link for the qualcomm drivers for Oneplus 7T? Because all links in the thread are not working..
I have managed to install PDC in QPST in my laptop, but there is no driver shown...
I believe it is before I have the wrong Qualcomm drivers...
Any ideas or help?
Thanks in advance
Click to expand...
Click to collapse
Follow this guide, as it worked for me. https://www.youtube.com/watch?v=X11kw0z7U_E
EugenStanis said:
Follow this guide, as it worked for me. https://www.youtube.com/watch?v=X11kw0z7U_E
Click to expand...
Click to collapse
I followed the guide, installed all files, but my phone is not shown-connected to PDC.
Any ideas??
Thanks in advance...
KostisTTT said:
I followed the guide, installed all files, but my phone is not shown-connected to PDC.
Any ideas??
Thanks in advance...
Click to expand...
Click to collapse
Do everything like described in guide, then connect device with ADB debugging on (You need root also) and type:
adb shell
su
setprop sys.usb.config diag,serial_cdev,rmnet,adb
EugenStanis said:
Do everything like described in guide, then connect device with ADB debugging on (You need root also) and type:
adb shell
su
setprop sys.usb.config diag,serial_cdev,rmnet,adb
Click to expand...
Click to collapse
@EugenStanis, thanks for your help.
I connected device, ADB on, Rooted and typed the commands.
A window opened in PC (Win 7) which says:
Qualcom USB Composite Device9091 .... Ready for use
Qualcom HS-USB Diagnostics 9091 .... Ready for use
Qualcom HS-USB Modem 9091 .... Ready for use
Qualcom HS-USB WWAN Adapter 9091.... Failed
ADB Interface .... No drivers found
Any ideas??
Thanks again...
Here are some codes, tricks and tips to enter hidden (or not so visible) menus or functions. Gathered from the net. Discovering them was not my merit, I just centralize them, with help of my friend asotmike.
1. Press repeatedly on Android version (Settings, About phone) to see the hidden surprise
2. Press repeatedly on kernel version (Settings, About phone, All specs ) to enter CIT menu
3. Press repeatedly on Internal storage (Settings, About phone, All specs) to enter Phone Info menu
4. Press repeatedly on MIUI logo (Settings, About phone) to activate and see more update settings (in the 3 dot menu, up, right)
5. Activate VOLTE and VOWIFI menus, they will apear in Settings, SIM cards & mobile network, under sim card settings . Dial *#*#86583#*#* for VOLTE and *#*#869434#*#* for VOWIFI
6. When lantern activated and phone display is off, no need to unlock to close lantern. JUst press power button.
Tested under MIUI11, global (european) variant.
Please feel free to add new codes.
I don't know what does every single submenu of submenu of submenu. Test them at your own risk and curiosity and share with us.
ruh01 said:
Here are some codes, tricks and tips to enter hidden (or not so visible) menus or functions. Gathered from the net. Discovering them was not my merit, I just centralize them, with help of my friend asotmike.
Click to expand...
Click to collapse
Here is one more:
Engineer mode on MTK: *#*#3646633#*#*¨
You have to be developer first to enter. :good:
Generaljan said:
Here is one more:
Engineer mode on MTK: *#*#3646633#*#*¨
You have to be developer first to enter. :good:
Click to expand...
Click to collapse
My hardware testing tab even emptier than rn8pro custom rom list
Generaljan said:
Here is one more:
Engineer mode on MTK: *#*#3646633#*#*¨
You have to be developer first to enter. :good:
Click to expand...
Click to collapse
Excellent
the dial option shows up "grayed" and so I can't click it, any way to get around this?
Hi, is there any way to have back miui- phone, messages , contacts on redmi note 8 pro?? I hate Google apps !! Thanks !!
Z750z said:
Hi, is there any way to have back miui- phone, messages , contacts on redmi note 8 pro?? I hate Google apps !! Thanks !!
Click to expand...
Click to collapse
There is.
Either use a Magisk module available on the telegram group called default miui apps or drastically flash Indonesian global Rom which has those by default. You can have further details / discussion in the thread called Call Recorder.
Hope this helps.
sapien438 said:
the dial option shows up "grayed" and so I can't click it, any way to get around this?
Click to expand...
Click to collapse
If you are referring to volte and vowifi you can use the following solution.
https://forum.xda-developers.com/showpost.php?p=81746693&postcount=12
Hello Fellow OP9 Pro users
I just wanted to start a thread for anyone interested in a OP9/Pro in australia that wanted to get Volte, VoWIFI, and 5G working.
I have tested this and confirmed that it is 100% working for Telstra & Vodafone, I have good word that this method will also work on Optus but don't actually have an Optus sim to test this with.
Huge shout out to happiboi from the OP8 forums for the methods used to get this all working with A11.
First step is to download the oneplus logkit from this link: https://downloadmirror.co/1MW9/com.oem.oemlogkit_1.0-1.apk
Once this has been installed, open the dialer on the phone and type in *#800#, tap on the "oneplus logkit" button, scroll down and tap on "Function switch", then tap on "VoLTE switch" but do not click restart click cancel. Then Tap on "VoWiFi switch" this time press reboot.
Once the phone has rebooted open settings, Wi-Fi & Network, SIM & network, SIM 1, then enable both the toggles for VoLTE and VoWIFI. This is probably also a good time to ensure 5G is enabled under "Prefer network type".
Now what we have done so far is essentially just enable the toggles for everything to work, what we still need to do is actually configure the phone to work on the Australian mobile networks, this is where the information and hard work from happiboi really comes in. I have quoted the guide from happiboi below as it is very well written anyway.
happiboi said:
Code:
Prerequisites:
* Need ADB suite available on PC & enabled "ADB debugging" on phone via developer options
* When you permit your PC adb access to the phone after first adb command, make sure you tick always permit this device. When the phone boots after "adb reboot ftm", the screen is inactive so you can't authorise the device when you try to adb shell and are stuck
* Need QPST suite of apps installed on PC (needed PDC tools + EFS explorer)
* If on custom firmware - probably a good idea to backup your phone before you do this. On custom firmware after the first "adb reboot ftm" rebooting again puts the device in a boot loop until you format data
Process:
- Open command prompt on PC & navigate to where your ADB suite is located
- Type command without "":
"adb devices" (I like to do this to ensure adb can speak with phone/computer)
- Should display:
List of devices attached
<if working, your device should be listed here (else, it'll be blank)>
- Type command without "":
"adb reboot ftm"
--> This puts phone into field test mode
- Type command without "":
"adb shell"
--> Creates dialogue for shell command on phone
- In the shell (OnePlus8Pro:/ $ ) type command without "":
"setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb"
--> This opens up ports that we used to be able to in Android 10
- Phone Screen is still blank - but it's OK.
- Start up PDC Tool in Admin mode on PC
- Click drop down, select phone connection (there's only 1 in the list)
--> ** If the drop-down box is empty and no phone/device listed, you cannot proceed.
--> ** Other users have foudn this to be related to a Qualcomm driver issue.
--> ** Delete the drivers you have currently installed and get a new one from here:
--> ** https://gsmusbdriver.com/install-qualcomm-usb-driver.
--> ** Also once the device shows up in PDC don't click on it, open efs explorer and let it start searching directories --> ** before going back to PDC and clicking on the device in the drop down.
--> ** The window may say 'not responding' just leave it until the carrier list populates then carry on with below steps
- Do the profile activation stuff for Telefonica_UK_Commercial:
- Look for "Telefonica_UK_Commercial", right click and SetSelectedConfig for both Sub0 and Sub1
- Click on the above profile again and click on Activate
- Do not restart your phone
- Don't close PDC yet (don't know if it make a difference but I didn't close)
- Open EFS Explorer (I opened in Admin mode too)
- Navigate to "\nv\item_files\ims\"
- Replace ims_user_agent file with one supplied
--> The supplied one has Telstra VoLTE Qualcomm as header instead of Telefonica
- Navigate to "\policyman"
- Replace carrier_policy.xml & carrier_policy.xml_Subscription01 with ones supplied.
--> Just take carrier_policy.xml and make a copy named "carrier_policy.xml_Subscription01"
--> ** Caveat, I further modified the carrier_policy.xml file as it wasn't enabling 5G for me on my IN2020 (Android 11) Oneplus 8 Pro.
--> ** I changed the nr5g_sa_bands base & nr5g_nsa_bands base values to be "hardware" rather than specifically band n78.
--> ** This changes config to allow whatever 5G bands the hardware has available rather than specific bands
--> ** You can't enable bands that the hardware doesn't support anyway so makes sense to enable all
--> ** This gave me the needed 5G access with Telstra
- Type command without "":
"adb reboot"
After phone boots back up, 5G + VoLTE + VoWiFi are all intact and in working order!
[/QUOTE]
Click to expand...
Click to collapse
I am extremely interested to see if anyone running the A12 beta would try this and see what sort of results they are able to achieve.
Cheers guys.
Thanks for this. Can confirm that this works for the UK as well. I'm on VOXI (Vodafone) and saw no option for wifi calling. Just followed the first part to download the logkit, enabled switch, wifi calling working
mhall156 said:
Hello Fellow OP9 Pro users
I just wanted to start a thread for anyone interested in a OP9/Pro in australia that wanted to get Volte, VoWIFI, and 5G working.
I have tested this and confirmed that it is 100% working for Telstra & Vodafone, I have good word that this method will also work on Optus but don't actually have an Optus sim to test this with.
Huge shout out to happiboi from the OP8 forums for the methods used to get this all working with A11.
First step is to download the oneplus logkit from this link: https://downloadmirror.co/1MW9/com.oem.oemlogkit_1.0-1.apk
Once this has been installed, open the dialer on the phone and type in *#800#, tap on the "oneplus logkit" button, scroll down and tap on "Function switch", then tap on "VoLTE switch" but do not click restart click cancel. Then Tap on "VoWiFi switch" this time press reboot.
Once the phone has rebooted open settings, Wi-Fi & Network, SIM & network, SIM 1, then enable both the toggles for VoLTE and VoWIFI. This is probably also a good time to ensure 5G is enabled under "Prefer network type".
Now what we have done so far is essentially just enable the toggles for everything to work, what we still need to do is actually configure the phone to work on the Australian mobile networks, this is where the information and hard work from happiboi really comes in. I have quoted the guide from happiboi below as it is very well written anyway.
I am extremely interested to see if anyone running the A12 beta would try this and see what sort of results they are able to achieve.
Cheers guys.
Click to expand...
Click to collapse
Hey there,
I'm glad this is working for you too - the credit really goes back to all the XDA users who have helped to give guidance in creating these steps
For anyone reading and interested, it has now been confiremd working on OP6, 7, 8 and 9 series phones (as well as Nord).
Great way to get features that should be 'enabled' from OP themselves and remember you will need to do this after every system/OTA update to re-enable these functions.
Happy days, cheers all!
Thanks so much! This worked perfectly for me with an 8pro on Telstra. I work in an area with a 4G only tower so haven't been able to make calls for the last 6 months!
Could the same methodology be followed for my colleague's Xiaomi mi 10t pro 5g?
happiboi said:
Hey there,
I'm glad this is working for you too - the credit really goes back to all the XDA users who have helped to give guidance in creating these steps
For anyone reading and interested, it has now been confiremd working on OP6, 7, 8 and 9 series phones (as well as Nord).
Great way to get features that should be 'enabled' from OP themselves and remember you will need to do this after every system/OTA update to re-enable these functions.
Happy days, cheers all!
Click to expand...
Click to collapse
jbell87 said:
Thanks so much! This worked perfectly for me with an 8pro on Telstra. I work in an area with a 4G only tower so haven't been able to make calls for the last 6 months!
Could the same methodology be followed for my colleague's Xiaomi mi 10t pro 5g?
Click to expand...
Click to collapse
There's no harm in trying on the Xiaomi.
The other way to attempt this was the original process outlined here: https://forum.xda-developers.com/t/volte-and-vowifi-in-australia.4095097/post-82847027
The only reason we (OnePlus users) had to change our method was because OP closed off access to the efs ports after the android 11 updates.
Not working whit Ho mobile Italy carrier
Ho can restore the original versione of. com.oem.oemlogkit
Regards
Thanks a lot for this! thought I was being screwed by Telstra the whole time.
Confirmed working on LE2123, Oxygen build 11.2.6.6.LE15BA with Telstra 5G, VoWIFI & VoLTE, though when installing the Qualcomm driver in Device Manager I had to use the "Qualcomm HS-USB WWAN Adapter 9091" option to make my phone show up in QPST.
happiboi said:
Hey there,
I'm glad this is working for you too - the credit really goes back to all the XDA users who have helped to give guidance in creating these steps
For anyone reading and interested, it has now been confiremd working on OP6, 7, 8 and 9 series phones (as well as Nord).
Great way to get features that should be 'enabled' from OP themselves and remember you will need to do this after every system/OTA update to re-enable these functions.
Happy days, cheers all!
Click to expand...
Click to collapse
Hey there! I have a Nord (EU AC2003 model) and I'm in Bulgaria on the Telenor network. I don't care about VoLTE or VoWIFI but I do want to be able to use 5G as my carrier supports it (and should be compatible with the phone as they are using the n78 band according to Wikipedia and the phone supports it).
On the phone Telenor said it needed no special activation on their side so this is an issue with the device. I don't have the 5G option in preferred network selection at all so I thought this guide would help until I saw that the XML files are for Telstra.
You said that it has been confirmed to work on Nord, my question is, would this guide work specifically to force the phone to use 5G (I have already tried enabling it through the engineering menu via dialing *#*#4636#*#* but that doesn't work for me)? My second question is whether it would be possible for someone show me how to modify the XML files for my carrier (Telenor BG)/modify them for me if that's the case?
mhall156 said:
Hello Fellow OP9 Pro users
I just wanted to start a thread for anyone interested in a OP9/Pro in australia that wanted to get Volte, VoWIFI, and 5G working.
I have tested this and confirmed that it is 100% working for Telstra & Vodafone, I have good word that this method will also work on Optus but don't actually have an Optus sim to test this with.
Huge shout out to happiboi from the OP8 forums for the methods used to get this all working with A11.
First step is to download the oneplus logkit from this link: https://downloadmirror.co/1MW9/com.oem.oemlogkit_1.0-1.apk
Once this has been installed, open the dialer on the phone and type in *#800#, tap on the "oneplus logkit" button, scroll down and tap on "Function switch", then tap on "VoLTE switch" but do not click restart click cancel. Then Tap on "VoWiFi switch" this time press reboot.
Once the phone has rebooted open settings, Wi-Fi & Network, SIM & network, SIM 1, then enable both the toggles for VoLTE and VoWIFI. This is probably also a good time to ensure 5G is enabled under "Prefer network type".
Now what we have done so far is essentially just enable the toggles for everything to work, what we still need to do is actually configure the phone to work on the Australian mobile networks, this is where the information and hard work from happiboi really comes in. I have quoted the guide from happiboi below as it is very well written anyway.
I am extremely interested to see if anyone running the A12 beta would try this and see what sort of results they are able to achieve.
Cheers guys.
Click to expand...
Click to collapse
i previously had 5g working and volte but ever since i updated firmware for the 8t i lose it i also did the steps which got me 5g before still with no success hopefully this will help which you editing stuff for telstra. the ims whch you put for telstra do i need it im with optus
Just wanted to say this guide is working with an Optus network sim card in Australia!
Carrier: Moose Mobile (Optus)
Device: One Plus 8 Pro (In2020)
Android version 11
As @LordFigTree mentioned I also had to use the "Qualcomm HS-USB WWAN Adapter 9091" driver.
Other than that flawless guide, thank you very much to everyone who made this possible!
error:S
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By.TRabZonLu™ said:
error:S
View attachment 5405019
Click to expand...
Click to collapse
Might be something to do with the special characters in your user file name? Not sure but it might be worth trying to copy the file from the root of your drive.
Lofty248 said:
Might be something to do with the special characters in your user file name? Not sure but it might be worth trying to copy the file from the root of your drive.
Click to expand...
Click to collapse
Unfortunately it has nothing to do with it. The problem still persists, I couldn't fix it, I gave up.
Lofty248 said:
Just wanted to say this guide is working with an Optus network sim card in Australia!
Carrier: Moose Mobile (Optus)
Device: One Plus 8 Pro (In2020)
Android version 11
As @LordFigTree mentioned I also had to use the "Qualcomm HS-USB WWAN Adapter 9091" driver.
Other than that flawless guide, thank you very much to everyone who made this possible!
Click to expand...
Click to collapse
did you change anything with the carrier policy and carrier_policy.xml_Subscription01? also the ims file? im on optus aswell
Unfortunately this guide doesn't seem to work anymore, the after the last two updates (now on Oxygen OS 11.2.10.10.LE15BA) try the same process but it i don't see it working.
LordFigTree said:
Unfortunately this guide doesn't seem to work anymore, the after the last two updates (now on Oxygen OS 11.2.10.10.LE15BA) try the same process but it i don't see it working.
Click to expand...
Click to collapse
Hey Mate,
I'm running 11.2.10.10.LE15BA and is working flawlessly for me, have tried both Vodafone AU and Telstra sims with no issues.
Damn ok i'm doing something wrong then, i'll try again, thanks for the info.
LordFigTree said:
Damn ok i'm doing something wrong then, i'll try again, thanks for the info.
Click to expand...
Click to collapse
East as mate, let me know how you go!
I'm just here hoping OOS12 doesn't break this method lmao
mhall156 said:
East as mate, let me know how you go!
I'm just here hoping OOS12 doesn't break this method lmao
Click to expand...
Click to collapse
Weird, just did it exactly the same as I did last time but it has now worked, showing i have full 5G connection.
Thanks @mhall156 i wouldn't have tried again if you didn't say it's still working for you, not sure how i screwed it last time but glad i got 5G back.
Awesome, I'm glad it's working! I have had some attempts not work for seemingly unknown reasons. I've just restarted the phone and tried again and have always seemed to make it work.
It's a shame we have to go through this to make our otherwise great phones work properly.