Develop Bugs

hx4700 - help me PLEASE !

Dear Friends,
I was flashing ROM to my hx4700 (upgrade from the first version of MW 5 to the second official version) when due to power failure my computer switched off and the connection with HP was lost. It was exactly on 62% and now I have a BIG problem..
When I am trying to flash the update again, it says "Incorrect Language. Update cannot continue". It shows ROM version as 4.xx and language as "unknown" (upgrade is for version 2.01.05).
When I try the previous version it shows model: unknown, ROM: unknown, and language: English. Update to version 2.00.39. The update starts.. from 0.1% to 1% (each 0.1% in abt. 15 sec) but then stops.. It shows Error 606 - timeout.
What can I do?? Can I try flash a new ROM from SD card? And if yes, how to do it??
HELP ME PLEASE !!

EdJessops said:
Dear Friends,
I was flashing ROM to my hx4700 (upgrade from the first version of MW 5 to the second official version) when due to power failure my computer switched off and the connection with HP was lost. It was exactly on 62% and now I have a BIG problem..
When I am trying to flash the update again, it says "Incorrect Language. Update cannot continue". It shows ROM version as 4.xx and language as "unknown" (upgrade is for version 2.01.05).
When I try the previous version it shows model: unknown, ROM: unknown, and language: English. Update to version 2.00.39. The update starts.. from 0.1% to 1% (each 0.1% in abt. 15 sec) but then stops.. It shows Error 606 - timeout.
What can I do?? Can I try flash a new ROM from SD card? And if yes, how to do it??
HELP ME PLEASE !!
Click to expand...
Click to collapse
No Problem. Your 4700 will be fine. Go to http://forum.brighthand.com/showthread.php?t=246529 and download the bootloader from Chrismrulz (click on his signature). Use it to flash any ROM you like. This bootloader works like a charm.
Regards,
Sanjay

Many Thanks !!
Sanjay, you are GREAT !!)
Many many thanks) Only 5 hours ago I was devastated, now I am happy - everything is working again) I deserved a bottle of bear - pls let me know if you are ever in London or Vancouver, ok?
I am going to offer my thanks to Chris Mrulz as well. You are absolutely right - the bootloader works like a charm)
The last question - I upgraded it now to version SL6V3. Should I upgrade to CEOS_new?
Kind Regards,
Edward

EdJessops said:
Sanjay, you are GREAT !!)
Many many thanks) Only 5 hours ago I was devastated, now I am happy - everything is working again) I deserved a bottle of bear - pls let me know if you are ever in London or Vancouver, ok?
I am going to offer my thanks to Chris Mrulz as well. You are absolutely right - the bootloader works like a charm)
The last question - I upgraded it now to version SL6V3. Should I upgrade to CEOS_new?
Kind Regards,
Edward
Click to expand...
Click to collapse
Glad to hear your 4700 is alive. As for newer ROMs, all of the WM6.1 you see in this forum on the 4700s is based on ports from other devices. There has been no significant update and frankly, not likely to be. For me at least, later versions do not offer functional benefits that I can use. IMHO, functionality is more important than gaining the last nano-second of speed. I have not been able to improve on the basic SL61V3, and will leave it alone for now. It works well enough although I personally prefer the Lite version without IE and WMP.
My advice would be to try various ROMs to see which ones work best for you. I'm sure you will find one that suits.
Regards,
Sanjay

How can i find my Touch Pro2's Device ID

Hi all
I need help in this
I have been trying to find out my device id but till now no success !!
I have also tried "device.zip" which is available here in this forum but still now luck
When i used the device.zip and ran the file it got
HTC Touch device information - by dsixda
Touch version : Unknown
Device ID :
CID :
IPL :
SPL :
ROM Version : 1.86.401.0 (67102)
ExtROM Version : None
Operator Version: None
AKU Version : 5.0.80
Page Pool : Unknown
RAM Size : MB
ROM Size : MB
Model No. : Unknown
Part Number :
MCC+MNC : Not found
IMEI (private) :
Serial Number (private):
MAC Address (private) :
there is no information at all
during the process it tells me "A attached device is not functioning correctly"
The details of my phone are
ROM : 1.86.4010.0 (67102) WWE
ROM DATE: 09/25/09
RADIO VERSION : 4.49.25.17
CPU : QUALCOMM 7200 A
SPEED: 528 MHZ
RAM SIZE: 288
Addtional information:
I have hard-spl my phone so that i could install cooked roms
Now i have the offical Europe WM 6.5 installed
My phone is T-mobile HTC touch pro 2
I have already tired the system~about~device id
There it tells me my name as device id "jagdesh" but when i try to enter this into any app which needs my device id to unlock its says invalid
On my windows media center it says "Jagdesh's HTC Touch Pro 2"
So how can i find my device id ...help please!!

To find the device ID just hit: Start-->Settings-->About-->Device ID.
However, that probably doesn't matter, because it sounds like the apps probably need the "Owner Name", not the Device ID. You can find that by going: Start-->Settings-->Personal-->Owner Information.

Let me try registering the app with my owner info...
I will let you know it that works
But how can i find my Device ID if i want when i am not able to with the methods above

jagdesh said:
But how can i find my Device ID if i want when i am not able to with the methods above
Click to expand...
Click to collapse
What do you mean? Doesn't that method work for you? That gets you straight to the info you're asking for.

TaurusBullba said:
What do you mean? Doesn't that method work for you? That gets you straight to the info you're asking for.
Click to expand...
Click to collapse
Nope till now guys i have not been able to find out my Device ID
Please help urgently since i need it badly to activate my apps

Guys really need your help to find out my Device ID
Please anyone....

Try search for enableownerinfo, think its a cab for your problem. I had the same problem but cant remember if it was that cab who solved the issue, but you can try...

settings --- all settings --- Today --- Items --- uncheck htc Sense --- check owner info --- ok --- go to homepage --- click tap here to set owner info ---
Hope this is what u need.

rk73 said:
Try search for enableownerinfo, think its a cab for your problem. I had the same problem but cant remember if it was that cab who solved the issue, but you can try...
Click to expand...
Click to collapse
Googled it and installed it now..
But i am not sure if this is what i want
See i am trying to install some apps and when i try to register the it asks me my device id which i dont know how to get that!!
Anyways i will try this method and let you know if this works
Thanks

lombardo8 said:
settings --- all settings --- Today --- Items --- uncheck htc Sense --- check owner info --- ok --- go to homepage --- click tap here to set owner info ---
Hope this is what u need.
Click to expand...
Click to collapse
Thanks i will try this and let you know if it worked
But like i said i do think that Device Id is the same has owner's name .. maybe its some number or something
I read it somewhere that a device id is something which never changes its bunch of numbers and alphabets
Its not the same has IMEI or S/N number ..
Anyways will let you guys know of the results soon

HTC Device ID
Hello Jagdesh, greetings from the Netherlands where this HTC Touch Pro 2 is driving me crazy in may ways. One of them is not being able to find the Device ID. Did you find it at last?
And if so, can you tell me where these HTC people have hidden it?
Many thanks in advance,
Paul

Here's the answer, credit to HTC support the netherlands: look under the battery. There it is. ID starts starts with "HT"
Greetz Paul

pjgross said:
Hello Jagdesh, greetings from the Netherlands where this HTC Touch Pro 2 is driving me crazy in may ways. One of them is not being able to find the Device ID. Did you find it at last?
And if so, can you tell me where these HTC people have hidden it?
Many thanks in advance,
Paul
Click to expand...
Click to collapse
Did you mean the Device ID or the IMEI?

Hi Jagdish,
I faced the same problem you did. I found owner information icon when i bought the phone. Later when I hard reset i dont find it.
you might have solved the problem. for others here is a way to go to owner information. This is the way I did.
Installed TouchShell. On the TouchShell desktop screen tap and hold and goto settings > About tab > Registration > beside the owner id, click Edit tab. You are there.

HOT HD9 (HTC HD2 copy)

Hello everyone.
I got these cell phone and I need help for the SW and the other things that are needed for this device.
Does anyone have this phone, I need help?

Canelis said:
Hello everyone.
I got these cell phone and I need help for the SW and the other things that are needed for this device.
Does anyone have this phone, I need help?
Click to expand...
Click to collapse
Not heard of this device. Perhaps a chinese copy of HD2.
OK, found something. It runs on Android, so you can only run Android apps. BTW what exactly you mean when you say things needed?

Need to se is it last SW, and need GPS for this phone.CoPilot Live- not work on this device !!

Canelis said:
Need to se is it last SW, and need GPS for this phone.CoPilot Live- not work on this device !!
Click to expand...
Click to collapse
It runs 2.2 (as mentioned on the web), I don't have any idea if it can be upgraded, as you may know 2.2 isn't the latest version.
For GPS, you can check its specs if it has GPS or not, if yes then you can install the apps from the market otherwise perhaps connect an external GPS, although I am not sure weather an external will work or not.
You can click on 'Thanks' button, if I helped.

Model number : T8585
Android version: 2.3.4
Based Version : MAUI.11AMD.W11.19.SP.V1,2011/6/23 00:50
Need "working" GPS !!!!!!!

Maybe it could help us to help you if you could post the link.
The chinese website where I saw this, mentioned Android 2.2.

Many app not work on this mobile !

Maybe this will help : - h**p://www.efox-shop.com/hd9-mtk6573-4-3-zoll-kapazitiver-touchscreen-handy-wlan-umts-android-2-2-gps-dual-kamera-dual-sim-bluetooth-p-236121

since it is running android, so the compatible android apps should run on it, but since its a Chinese clone, no guarantees.
You can trying looking at other android phones by HTC or some other brand, to be safe.

You can try this rom Update_HD2_3G.zip www.multiupload.com/XOVS2HZTHO to remove all chinese aplications and to improve everything.
forum.china-iphone.ru/viewtopic.php?f=22&t=15521
Installation Guide
http://forum.xda-developers.com/showthread.php?t=1423489
For fix GPS:
Enter *#*#3646633#*#*
Go to YGPS
Wait for the green satellites appear.
Go to NMEA Log
Click "save" wait 5 minutes and then click "stop". Repeat the process after 1 hour.

Is your cellphone the same of this?
fastcardtech.com/goods.php?u=41964&id=6655
I bought 1 of them.

Now HTC mobile phone is also very popular in China. But i am sorry i don't have it. It is a little expensive.

Is it upgradable to ICS???

.
Thread moved. Would advise you to read forum rules and post in correct section.

[Q] Hello @ all ...need help with my defy

Hi @ all,
1st i have to say thx, that i can reg me on that forum . Now to my actual question, im new in the android world, im very good in iOS stuff but now thats my 1st steps in the android world. I bought a used Motorola MB526 (i hope its a defy), and i think its tmo sim locked, because when i put my sim in i have the message "pin to unlock the sim network" on my display, i dont have any sim-pin or sim-lock on the sim itself.
And cause im new with that, i dont know what steps i have to do now :/ I have some specs from it :
Code:
SystemVersion:
45.0.1251.MB526.T-Mobile.en.DE
Modell:
MB526
Android Version:
2.3.5
Baseband Version:
EPU93_U_00.60.00
Kernel Version:
2.6.32.9-gbdd614e
[email protected] #1
Build Number:
4.5.1-134_DFP-1251
I hope someone can help me out, thx alot in advance

there are serveral ways:
1. you pay a "service" to calculate your unlock code by giving them your imei, country and net-provider
2. you can have a look at the links in this thread: http://forum.xda-developers.com/showthread.php?t=1464645
-root your phone
-install cm7 (which of course i would only do after reading a LOT of stuff here in this forums of course)
-install the software from the external links
-run it
both ways are somewhat risky and you might have a chance to loose some money (1. way) or your phone (2.)
if you have not done it already i would also recommend some searching. there are quite some topics around on this.
cheers

Thanks alot for the reply . I surfed the tmo wepsite, and on it there is a "sim unlock" section where i can enter my imei, i did that and became an unlock code directly on their homepage. And it works
Now i can with my eplus carrier with that defy . Now i have another question, can i update the oS that is installed on the device ? You see my specs above Android Version etc. is that okay or can i go higher ?

j0k3r0815 said:
Thanks alot for the reply . I surfed the tmo wepsite, and on it there is a "sim unlock" section where i can enter my imei, i did that and became an unlock code directly on their homepage. And it works
Now i can with my eplus carrier with that defy . Now i have another question, can i update the oS that is installed on the device ? You see my specs above Android Version etc. is that okay or can i go higher ?
Click to expand...
Click to collapse
Well you could always go higher and higher by rooting
Sent from my MB526 using XDA App

Root rulez!
You do even own a Defy+.
Since I own the same phone i would recommend rooting the phone, install MS2Ginger 2.1 with all the patches you like and even V6 Supercharger, which is really a must-have! My Defy+ got considerably snappier with this script.
But regardless what you do: Do a NANDroid backup first after root!

Help please! Spreadtrum SC6820 HTM GT-T9500 5" ROM

Hi... I bricked my HTM GT-T9500 (Samsung S4 clone) and I can't find a compatible rom anywhere, so if some of you have the original or some modified rom to fit my phone it would be very appreciated
The model is HTM GT-T9500 it runs SC6820 mocordroid 2.3.5 MT6589-C920-EN-V05
http://www.focalprice.com/MH0688W/GTT9500_50_Touch_Screen_480x854_Android_42_SingleCore_SC6820.html
Thx very much and happy new year

Same problem, anybody have tested rom for this phone

blackangel82 said:
Same problem, anybody have tested rom for this phone
Click to expand...
Click to collapse
see here
vvv.vvv.vvv.needrom.com/?s=htm+9500&sa=search&scat=0
I unbrick htm A9500 with a rom from here

BaleaRic_Dj said:
see here
vvv.vvv.vvv.needrom.com/?s=htm+9500&sa=search&scat=0
I unbrick htm A9500 with a rom from here
Click to expand...
Click to collapse
yes i have pac files for a9500 because a9500 have 4.7inch screen is shows only white lines on t9500
t9500 have 5inch screen, all work after flash only display have black and white lines

blackangel82 said:
yes i have pac files for a9500 because a9500 have 4.7inch screen is shows only white lines on t9500
t9500 have 5inch screen, all work after flash only display have black and white lines
Click to expand...
Click to collapse
Well, do not know how to stay out of this with google translation , I hope I explain well
the problem is because the white lines was safe settings as the previous rom flash with new rom the previous settings in the nand flash was not loaded ok ... I also passed through the white lines
We split ... from what I 've seen in the descriptions of your phone have the same but with different names, things Chinese , the same processor and the same specifications of memory ram and rom also the cameras and the screen, which is 480x854 resolution . Ok , here is the rom to retrieve the phone , that if after trying several times hehe, well I found the problem when I put it to recover that failed was just starting BKF_NV , well after trying and trying , reaching the following configuration : wITH ResearchDownload 2.9.7007 ( that I use ) drivers " SciU2S " installed 'll Options ( second tab ) and give it to " Repartition " and "Reset to Normal", then the third is backup pesteña delete all options, then on the fourth tab view all options are removed and clean but the last putting Erase All Flash and loaded .... if flashing goes well start playing nothing but end with the word Orro .
do not use the left upgradedownloader because not configure
here is the rom that I use:vvv.vvv.vvv.needrom.com/wp-content/uploads/2014/01/S18_JHT_DS_ORRO_FT5306_256M_EN_V02-A9500.zip[/url]
good luck

BaleaRic_Dj said:
Well, do not know how to stay out of this with google translation , I hope I explain well
the problem is because the white lines was safe settings as the previous rom flash with new rom the previous settings in the nand flash was not loaded ok ... I also passed through the white lines
We split ... from what I 've seen in the descriptions of your phone have the same but with different names, things Chinese , the same processor and the same specifications of memory ram and rom also the cameras and the screen, which is 480x854 resolution . Ok , here is the rom to retrieve the phone , that if after trying several times hehe, well I found the problem when I put it to recover that failed was just starting BKF_NV , well after trying and trying , reaching the following configuration : wITH ResearchDownload 2.9.7007 ( that I use ) drivers " SciU2S " installed 'll Options ( second tab ) and give it to " Repartition " and "Reset to Normal", then the third is backup pesteña delete all options, then on the fourth tab view all options are removed and clean but the last putting Erase All Flash and loaded .... if flashing goes well start playing nothing but end with the word Orro .
do not use the left upgradedownloader because not configure
here is the rom that I use:vvv.vvv.vvv.needrom.com/wp-content/uploads/2014/01/S18_JHT_DS_ORRO_FT5306_256M_EN_V02-A9500.zip[/url]
good luck
Click to expand...
Click to collapse
Hi mate your display is also 5inch ??
still white and black strips

My Phone
blackangel82 said:
Hi mate your display is also 5inch ??
still white and black strips
Click to expand...
Click to collapse
Is the same phone

BaleaRic_Dj said:
Is the same phone
Click to expand...
Click to collapse
hi i try this what you say without any better results
i post you how looks display when i flash rom from a9500
now i have other rom which have 4 inch display and like you can see is not display properly because my have 5inch

blackangel82 said:
hi i try this what you say without any better results
i post you how looks display when i flash rom from a9500
now i have other rom which have 4 inch display and like you can see is not display properly because my have 5inch
Click to expand...
Click to collapse
Same here, need the rom for T9500 not A9500

allweknowisa said:
Same here, need the rom for T9500 not A9500
Click to expand...
Click to collapse
the phone in china cost around 50 pounds, i think to buy one more download software with all data etc. save in pac format and reflash the old one.
Problem is because i'm not sure the free software can make full backup and save to pac format
Volcano box can due this only is cost around 100 pounds

I brought two of those model's for my niece and nephew for x-mas. After they unpacked it and set it up, they notice some of the buttons are not working. So after contacting the seller directly over the phone they emailed me two of the firmware. it was hit and miss, one work perfectly on one phone and so was the other.
****EDIT***** sorry I can't post outside links. so, they are both uploaded to my mediafire
/download/zqsnu8ma1izvrcv/
and
/download/um14hr6ib630ttd/
just add the mediafire url at the beginning and it should lead to the download. If you need the whole link for some reason just PM me.
They are both in .PAC format to be use with researchdownload. And one more thing make sure on the Calibration tab, uncheck everything or else it will fail at FDL2. The older one label the V06 has more option but just make sure nothing is checked also.
My phone model is the HTM GT-T9500-B SC6820 with the 5" screen. So try them both. :fingers-crossed:

mrkoykang said:
I brought two of those model's for my niece and nephew for x-mas. After they unpacked it and set it up, they notice some of the buttons are not working. So after contacting the seller directly over the phone they emailed me two of the firmware. it was hit and miss, one work perfectly on one phone and so was the other.
****EDIT***** sorry I can't post outside links. so, they are both uploaded to my mediafire
/download/zqsnu8ma1izvrcv/
and
/download/um14hr6ib630ttd/
just add the mediafire url at the beginning and it should lead to the download. If you need the whole link for some reason just PM me.
They are both in .PAC format to be use with researchdownload. And one more thing make sure on the Calibration tab, uncheck everything or else it will fail at FDL2. The older one label the V06 has more option but just make sure nothing is checked also.
My phone model is the HTM GT-T9500-B SC6820 with the 5" screen. So try them both. :fingers-crossed:
Click to expand...
Click to collapse
Will check thanks mate
is quad core or single core ?

blackangel82 said:
Will check thanks mate
is quad core or single core ?
Click to expand...
Click to collapse
its a single core
i checked the spec on the OP website and it is the same as the one i bought

mrkoykang said:
its a single core
i checked the spec on the OP website and it is the same as the one i bought
Click to expand...
Click to collapse
ok firmware works
because my imei change i was repair imei and is ok now, problem because still i not have signal
i have backup from research tool how to write back backup ?
any chance to repair ??

blackangel82 said:
ok firmware works
because my imei change i was repair imei and is ok now, problem because still i not have signal
i have backup from research tool how to write back backup ?
any chance to repair ??
Click to expand...
Click to collapse
let look into it give about 10 mins
---------- Post added at 09:54 AM ---------- Previous post was at 09:48 AM ----------
blackangel82 said:
ok firmware works
because my imei change i was repair imei and is ok now, problem because still i not have signal
i have backup from research tool how to write back backup ?
any chance to repair ??
Click to expand...
Click to collapse
blackangel82 have you tried manually entering in your network's APN ?
settings---->Wireless & network settings------>Mobile network

mrkoykang said:
let look into it give about 10 mins
---------- Post added at 09:54 AM ---------- Previous post was at 09:48 AM ----------
blackangel82 have you tried manually entering in your network's APN ?
settings---->Wireless & network settings------>Mobile network
Click to expand...
Click to collapse
Hi still no signal, maybe is problem with firmware different baseband ? etc.
EDIT.
Successful restored nv backup, still no signal
after restore modem and nv backup again signal comes back
modem.img taken from a9500.pac
Thanks for help and special thanks for @mrkoykang
Best Regards
Lucas

blackangel82 said:
Hi still no signal, maybe is problem with firmware different baseband ? etc.
EDIT.
Successful restored nv backup, still no signal
after restore modem and nv backup again signal comes back
modem.img taken from a9500.pac
Thanks for help and special thanks for @mrkoykang
Best Regards
Lucas
Click to expand...
Click to collapse
No problem, glad to see you got your phone working.

blackangel82 said:
Hi still no signal, maybe is problem with firmware different baseband ? etc.
EDIT.
Successful restored nv backup, still no signal
after restore modem and nv backup again signal comes back
modem.img taken from a9500.pac
Thanks for help and special thanks for @mrkoykang
Best Regards
Lucas
Click to expand...
Click to collapse
Hi, I believe that I have the same problems you had, just 4 years later on, unfortunately it looks like @mrkoykangs files are no longer available on mediafire. By some amazing miracle you wouldn't happen to still have a copy? Many thanks in advance!