Related
Hi,
I for one is an eternal seeker of a lagfree SGS. But, being Sztupy, he can only spew out TECH. Most people either misunderstand, misinterpret or misdo things that he says & get into trouble.
My request here. Can a dev put things into perspective & give out a simple detailed guide for everyone? It needs to be lucid & comprehensive, & to be understood by both a layman as well as Einstein.
Thanks to all of you for the good work. I now feel proud I chose SGS over X10, my daughter gave me 10 seconds to choose.
ragin said:
Hi,
I for one is an eternal seeker of a lagfree SGS. But, being Sztupy, he can only spew out TECH. Most people either misunderstand, misinterpret or misdo things that he says & get into trouble.
My request here. Can a dev put things into perspective & give out a simple detailed guide for everyone? It needs to be lucid & comprehensive, & to be understood by both a layman as well as Einstein.
Thanks to all of you for the good work. I now feel proud I chose SGS over X10, my daughter gave me 10 seconds to choose.
Click to expand...
Click to collapse
Sztupy's stuff is changing almost daily! A guide would be out of date in no time. Wait a week or so for it to get more stable!
I am SOOO curious to know what Sztupy does in real life...
What is he?
cyborg????
RyanZA said:
Sztupy's stuff is changing almost daily! A guide would be out of date in no time. Wait a week or so for it to get more stable!
Click to expand...
Click to collapse
A guide for a kernel that is meant to be for people to make experimenting easy... kinda strange
Of course there might be a guide which tells you how to achieve the most stable config with ultk, but I'd rather flash voodoo in that case as it's much more stable. (but it's not really meant for people who want to experiment with different hacks and tweaks).
Btw. some cookers already use ultk in their config, and provide some guide on which option to choose (usually they tell you use no-rfs advanced ext4). They also have the added benefit that using the same rom there are less problems and more people can actually try to guess what went wrong (as all of the people on that rom topic are actually using more or less the same config).
The ultk, because it's just a kernel can be flashed to a lot of different roms, and it's possible some of it bugs are there because it's in some way or another incompatible with that particular rom.
Although a simple guide would be:
- Reboot to download mode (by holding voldown+home+power while switching on)
- Flash a complete JPM or JP6 based ROM, using Odin (re-partition ticked, use the 512 pit, and use a package that contains all images (dbdata,cache,system), although dbdata might be optional)
- After flashing reboot to download mode.
- Flash the kernel image over on that rom, using Odin (re-partition is not ticked, only the image is set as the PDA part)
- After flashing reboot to recovery mode (by holding volup+home+power while switching on)
- In the recovery menu chose Advanced ULK features->Lagfix options->No -RFS Advanced (a=e4)
- Press "reboot to recovery"
- After reboot chose not to create a backup, nor a restore
- After it boots up in recovery again press reboot again.
- You'll have a clear system with ext4 on all data partitions
Comeon... he is as human as me & you. I meant his WORK.
ragin said:
I am SOOO curious to know what Sztupy does in real life...
What is he?
Click to expand...
Click to collapse
I create facebook spam campaigns for money for an insurance company. (don't worry, only for hungarians)
And I still havent finished the thing with the deadline of tomorrow morning, because I spent all my weekend on XDA.
You happy now?
sztupy said:
A guide for a kernel that is meant to be for people to make experimenting easy... kinda strange
Of course there might be a guide which tells you how to achieve the most stable config with ultk, but I'd rather flash voodoo in that case as it's much more stable. (but it's not really meant for people who want to experiment with different hacks and tweaks).
Btw. some cookers already use ultk in their config, and provide some guide on which option to choose (usually they tell you use no-rfs advanced ext4). They also have the added benefit that using the same rom there are less problems and more people can actually try to guess what went wrong (as all of the people on that rom topic are actually using more or less the same config).
The ultk, because it's just a kernel can be flashed to a lot of different roms, and it's possible some of it bugs are there because it's in some way or another incompatible with that particular rom.
Although a simple guide would be:
- Reboot to download mode (by holding voldown+home+power while switching on)
- Flash a complete JPM or JP6 based ROM, using Odin (re-partition ticked, use the 512 pit, and use a package that contains all images (dbdata,cache,system), although dbdata might be optional)
- After flashing reboot to download mode.
- Flash the kernel image over on that rom, using Odin (re-partition is not ticked, only the image is set as the PDA part)
- After flashing reboot to recovery mode (by holding volup+home+power while switching on)
- In the recovery menu chose Advanced ULK features->Lagfix options->No -RFS Advanced (a=e4)
- Press "reboot to recovery"
- After reboot chose not to create a backup, nor a restore
- After it boots up in recovery again press reboot again.
- You'll have a clear system with ext4 on all data partitions
Click to expand...
Click to collapse
Thank you for giving this guide. It might help a lot of people. ( This isn't there on your post & nobody cared to tell too).
how about a breakdown on each options in the whole menu? Am I asking for much?
sztupy said:
I create facebook spam campaigns for money for an insurance company. (don't worry, only for hungarians)
And I still havent finished the thing with the deadline of tomorrow morning, because I spent all my weekend on XDA.
You happy now?
Click to expand...
Click to collapse
I love this, I am a Gemini hehe
Some politician said a LONG time ago, 'If you want your words to be understood, 'tell it like you are telling it to a donkey'
sztupy said:
I create facebook spam campaigns for money for an insurance company. (don't worry, only for hungarians)
And I still havent finished the thing with the deadline of tomorrow morning, because I spent all my weekend on XDA.
You happy now?
Click to expand...
Click to collapse
Facebook... check.
Spam... check.
Insurance company... check.
Sir, how does it feel to be the most evil being alive?!
RyanZA said:
Facebook... check.
Spam... check.
Insurance company... check.
Sir, how does it feel to be the most evil being alive?!
Click to expand...
Click to collapse
I'm not evil, I just work for the evil
ragin said:
i am sooo curious to know what sztupy does in real life...
what is he?
Click to expand...
Click to collapse
muaddib69 said:
cyborg????
Click to expand...
Click to collapse
roflmao
ragin said:
Thank you for giving this guide. It might help a lot of people. ( This isn't there on your post & nobody cared to tell too).
how about a breakdown on each options in the whole menu? Am I asking for much?
Click to expand...
Click to collapse
not now, maybe a later time Anyway most of the options just turn on and off some features and tweaks other people made.
I started this thread ina good faith.
Please keep it that way.
sztupy said:
I'm not evil, I just work for the evil
Click to expand...
Click to collapse
Dont hate the player, hate the game....
ragin said:
I started this thread ina good faith.
Please keep it that way.
Click to expand...
Click to collapse
/me too, just joking
(anxious for next release of Sztupy)
Will it work with your Multinational ROM 3.0 (latest)?
sebarkh said:
Will it work with your Multinational ROM 3.0 (latest)?
Click to expand...
Click to collapse
Yep, it's actually preferred to use that rom as a base.
Ok, I'll try and flash it. Sztupy, your ROM is the only Froyo ROM I'm using. Thank You GREAT JOB!!!!
Pls correct me if I am wrong (still learning):
'Ext4 + ext2' means loop means buffer does not fsync ? It this safe? Not always 100% sure everything if saved?
Bind means using a faster but smaller partition ? Safe except for 'running out of space' problems ?
Correct? or?
I still need to test read speeds: How fast is RFS reads compared to EXT4 reading speed? I still believe an ALL EXT4 would be the best lag-fix!
Can /efs be made EXT4? I know /SYSTEM can. I need 48 hours in a day!
Thanks
JKay
This kernel is a new one with the recovery STEAM insteaod of the normal one, it support a lot of options, take a look
to use it:
apply extract the zip and apply the tar in odin as pda or also extract the tar and apply the zimage as kernel with heimdall
NOTE this is for the 2 froyo roms i know
EDIT:
V2
This is the v2 version, not many changes but from the SpeedMod Kernel by hardcore i used:
* Optimized compiler flags: -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp -fno-gcse -fprefetch-loop-arrays --param l2-cache-size=512 --param l1-cache-size=64 --param simultaneous-prefetches=6 --param prefetch-latency=400 --param l1-cache-line-size=64
Also there are some memory twaks from that thread, i got 334 of total RAM, please check your SGS before flahsing because by mistake i didnt and now im not sure if it did any change
CHECK camera/vide/radio/tv/games
PD i added ext4 and JFS, but i did not tested them
No go and thank him an zstupy for this great work
Probando...
luismanson said:
This kernel is a new one with the recovery STEAM insteaod of the normal one, it support a lot of options, take a look
to use it:
apply extract the zip and apply the tar in odin as pda or also extract the tar and apply the zimage as kernel with heimdall
Click to expand...
Click to collapse
Is it a fully working Steam??? I will surely try if it is.
i tryed some options and it worked, testing is welcome
Does it replace the CWM? Does it have all the basic CWM functions working? To go back, can we just flash another kernel with CWM or we need to flash a whole ROM?
I guess if you have a 'what's working' list & a 'to-do' list, we can start testing it.
Hello Luis, i put your Kernel in my SGS and now it dont show my IMEI.
I`m using Froyo JPD...
EDIT: Well... I done one Factory Reset and now IMEI turn show again...
What improviment i got with your Kernel? Have BLN?
Cya.
Guto ViP said:
Hello Luis, i put your Kernel in my SGS and now it dont show my IMEI.
I`m using Froyo JPD...
EDIT: Well... I done one Factory Reset and now IMEI turn show again...
What improviment i got with your Kernel? Have BLN?
Cya.
Click to expand...
Click to collapse
i didn't try yet, but it a good thing u to list the improvements done from the stock one.
it should give u more visibility!!
Guto ViP said:
Hello Luis, i put your Kernel in my SGS and now it dont show my IMEI.
I`m using Froyo JPD...
EDIT: Well... I done one Factory Reset and now IMEI turn show again...
What improviment i got with your Kernel? Have BLN?
Cya.
Click to expand...
Click to collapse
Seriously forget about BLN & other petty stuff. Go ahead and make a working STEAM KERNEL..
PS : This is some real good work.
PS2 : You need to put a BOUNTY on it.
PS3: checkout & rename your [ALPHA] to a version # looks good on the Title.
im not doing a lot of improvements, im working on some ideas on the work other ppl does for the other SGSs versions and thinks i would like, like this steam kernel
it is my V3 base kernel, it has tinyRCU, ondemand scheduler and BFQ sched
there is NO BLN because it caused problems with a2dp audio
Will keep a watch on this thread.
great man..lot's of options in steam menu...
some explanation about that? can u provide or give a link about lots of options we have now?
can i put everything in ext2????
everuthing ok unti now
ragin said:
Seriously forget about BLN & other petty stuff. Go ahead and make a working STEAM KERNEL..
PS : This is some real good work.
PS2 : You need to put a BOUNTY on it.
PS3: checkout & rename your [ALPHA] to a version # looks good on the Title.
Click to expand...
Click to collapse
Here we go again.. Please create your own message board where you can edit every topic title to whatever you like!
Ps1: and please stop the non value added replies you're posting all over this board.
Ps2: my apologize for this non value added reply. I'm just trying to make a statement
i wont put a bounty on work that anyone can do, but i really do need money and dont mind on people donating money
i will keep working on steam, but im so short of time that i can not test everything, thats why its alpha, at least on the B version
jersr said:
Here we go again.. Please create your own message board where you can edit every topic title to whatever you like!
Ps1: and please stop the non value added replies you're posting all over this board.
Ps2: my apologize for this non value added reply. I'm just trying to make a statement
Click to expand...
Click to collapse
<----- looks at his thanks meter & smiles,
Can we make the conversion to ext 2, 3 or 4 with this Steam Kernel?
And, it's too complicated to have some overclocking room on near future with this kernel? Like something to make easy to overclock with Set CPU and some setcpu.txt files?
Thanks, Luis! You're one of the most active developers to I9000B and we all should be completely thankful to you!
Keep with the good work! Congrats!
Ok. Running on JFS and everything seems to be ok and pretty fast till now. About 1500 on Quadrant and, just to mention, I've made a full conversion without backup. Wiped out everything to be sure if anything goes wrong it's not caused by apps and past configurations. Missed the ext4 conversion to test. Not tested ext2.
Sent from my GT-I9000B using Tapatalk
Hello Luis, I put your Kernel inside ffabio Froyo light... I change all to JFS, but for now my Titanium Backup doesnt work, i got only FC...
Can be JFS?
Tnx and good work!
Thread's dead?
Oh well...
I'm still running everything on JFS and it's pretty fast and smooth, without bugs as I could see. But after some research found that it could be interesting to put /cache and/or /system to ext2. Anyone already tried this? It really should make some difference?
Thanks! And c'mon! Wake up, people! This is one of the best kernels we have to our i9000B! Let's give some feedback!
ClowReed said:
Thread's dead?
Oh well...
I'm still running everything on JFS and it's pretty fast and smooth, without bugs as I could see. But after some research found that it could be interesting to put /cache and/or /system to ext2. Anyone already tried this? It really should make some difference?
Thanks! And c'mon! Wake up, people! This is one of the best kernels we have to our i9000B! Let's give some feedback!
Click to expand...
Click to collapse
You don't face the time-reset issue at restart?
ragin said:
You don't face the time-reset issue at restart?
Click to expand...
Click to collapse
Nope! But as I said, I've done a full conversion (everything on jfs) and wiped out everything via secret code and via recovery menu, just to be sure it's all clean.
Sent from my GT-I9000B using Tapatalk
Since I can't post in the developer section yet i'm asking here, hope it's ok. Been looking at the ROM for a few mins and it looks great, but i've been using MIUI for so long my flashing skills are kind of rusty.
First of all, the kernel is included in the ROM and is the one the developer recommends or have developed right?
And secondly, wich radio is recommended for the ROM? Could'nt find any answer to that in the first post dedicated to the ROM. Should i flash radio before or after i flash the ROM?
Again hope you don't mind me posting this stupid question here and thank you in advance for your answers.
Oh and btw does HTC Watch work with these ROMs? Living in Sweden if it matters.
googleye said:
Since I can't post in the developer section yet i'm asking here, hope it's ok. Been looking at the ROM for a few mins and it looks great, but i've been using MIUI for so long my flashing skills are kind of rusty.
First of all, the kernel is included in the ROM and is the one the developer recommends or have developed right?
And secondly, wich radio is recommended for the ROM? Could'nt find any answer to that in the first post dedicated to the ROM. Should i flash radio before or after i flash the ROM?
Again hope you don't mind me posting this stupid question here and thank you in advance for your answers.
Oh and btw does HTC Watch work with these ROMs? Living in Sweden if it matters.
Click to expand...
Click to collapse
Radio is your personal choice... just pick the one which works best for you. Flash the rom and yes the kernel is included in the rom.
---------- Post added at 10:58 PM ---------- Previous post was at 10:51 PM ----------
googleye said:
Since I can't post in the developer section yet i'm asking here, hope it's ok. Been looking at the ROM for a few mins and it looks great, but i've been using MIUI for so long my flashing skills are kind of rusty.
First of all, the kernel is included in the ROM and is the one the developer recommends or have developed right?
And secondly, wich radio is recommended for the ROM? Could'nt find any answer to that in the first post dedicated to the ROM. Should i flash radio before or after i flash the ROM?
Again hope you don't mind me posting this stupid question here and thank you in advance for your answers.
Oh and btw does HTC Watch work with these ROMs? Living in Sweden if it matters.
Click to expand...
Click to collapse
follow my signature for trouble free flash and welcome to rcmix3d 1.5... best rom out there and if the htc watch service is available in your country then yes it will work.
Transferring the ROM, Supercharger, full wipe 1.5 ext4, and the overclock thing right now, hopefully I'll have it done with the titanium backed up apps installed as well. Your signature actually helped alot.
googleye said:
Transferring the ROM, Supercharger, full wipe 1.5 ext4, and the overclock thing right now, hopefully I'll have it done with the titanium backed up apps installed as well. Your signature actually helped alot.
Click to expand...
Click to collapse
you are welcome just remember while using titanium backup DO NOT restore system apps and ONLY restore user apps without data.. even better if you have not started already just make a folder in the root of your sdcard\RCTeam\app.user and copy all your user apps from data\app folder to sdcard\RCTeam\app.user and let the rom install your apps automatically.
Restoring data was the reason i bought titanium backup
I'll just restore the apps i had then with market links. The ROM is really fast btw, the eyecandy isn't too bad either.
googleye said:
Restoring data was the reason i bought titanium backup
I'll just restore the apps i had then with market links. The ROM is really fast btw, the eyecandy isn't too bad either.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=18238757&postcount=5008
check out that post, and maybe try the zip i attached to it. really improves battery life and performance
I have a serious issue with fkin Wavesecure, whenever I open the app to enter my info and start using it the phone freezes and nothing responds so I have to pull out the battery and start over, after wich it happends again.
Anyone else using Wavesecure with RCMix?
googleye said:
I have a serious issue with fkin Wavesecure, whenever I open the app to enter my info and start using it the phone freezes and nothing responds so I have to pull out the battery and start over, after wich it happends again.
Anyone else using Wavesecure with RCMix?
Click to expand...
Click to collapse
don't use any sort of the anti virus or security apps. you could post in the support thread and see if any one is using wavesecure app who could help you. the support thread is here....
http://forum.xda-developers.com/showthread.php?t=1071455
Actually it seems that the script killersloth linked is the problem as the phone froze again before i even entered my SIM Pin, I'll just flash the restore thing before it freezes the next time.
And Wavesecure is actually really good, I can lock and locate and wipe the phone with simple text messages, though I never use any kind of AV apps.
googleye said:
Actually it seems that the script killersloth linked is the problem as the phone froze again before i even entered my SIM Pin, I'll just flash the restore thing before it freezes the next time.
And Wavesecure is actually really good, I can lock and locate and wipe the phone with simple text messages, though I never use any kind of AV apps.
Click to expand...
Click to collapse
I would just go with a standard Rom flash set it up as my liking then do a nand backup only then I will start playing with oc\uv and fine tuning the rom to my liking... it has saved me a lot of problems faced by many users. just my way of doing things. after every success mod I do a nand backup incase my next mod messes up something I have a backup to come back to saves a lot of time and hassle. IMHO I can't say any thing about killersloth's script coz I have not used it.
NAND backups takes ages xD
However the phone is working as it should now, all thats left is a nice theme, anyone?
I won't be playing around with voltages and speeds on the CPU, default is just fine.
googleye said:
NAND backups takes ages xD
However the phone is working as it should now, all thats left is a nice theme, anyone?
I won't be playing around with voltages and speeds on the CPU, default is just fine.
Click to expand...
Click to collapse
theme is just personal thing. go for the OPB theme 1.51, At the moment I have OPB runny blue 1.50 and I am happy about it.
http://forum.xda-developers.com/showthread.php?t=1265225
A bit too round and smooth for me, is there a topic with theme collections?
Went with this one:
http://forum.xda-developers.com/showthread.php?t=1286427
I have just downloaded this and after nand backup now checking it. It'd giving me weather clock fc. You might be luckier than me
Sent from my HTC Desire HD using XDA Premium App
Nope getting it aswell, I'll try the one you are using.
I can't log in to Facebook using friend stream when I want to put on my lockscreen, just says wrong username or password although I know it's not.
Can I use any of the ROMs listed in the OUT kitchen or do I have to upload my own files as the ones for this specific ROM aren't available.
googleye said:
Nope getting it aswell, I'll try the one you are using.
I can't log in to Facebook using friend stream when I want to put on my lockscreen, just says wrong username or password although I know it's not.
Can I use any of the ROMs listed in the OUT kitchen or do I have to upload my own files as the ones for this specific ROM aren't available.
Click to expand...
Click to collapse
your best bet is to upload the files from your phone or the downloaded rom, in the uot kitchen.. the fc problem in the glass theme is a known issue you overcome it by disabling the sound effects in the weather app
OK, thanks for the fc fix.
Only thing bothering me with the theme is the transparency in the status bar, replacing it and the battery, + a new font. Then I'm happy until I find something fancier
googleye said:
OK, thanks for the fc fix.
Only thing bothering me with the theme is the transparency in the status bar, replacing it and the battery, + a new font. Then I'm happy until I find something fancier
Click to expand...
Click to collapse
give it a try in uot kitchen you never know I and many more users will be installing your theme soon
Well the file uploads been sitting on pending for a while now, and the statusbar preview didn't work so I have no idea how it will turn out, we'll see soon
How can I use this tweak?
well i don't personally use it, but it might be a good idea to do some research.
If you are talking about the supercharger script...there is a whole thread dedicated by the developer.
Its is not a simple click and profit situation. Do some research and give it a shot on your phone.
sjpritch25 said:
well i don't personally use it, but it might be a good idea to do some research.
Click to expand...
Click to collapse
ask nicely and i'll give you the link. Google is your friend though.
sjpritch25 said:
ask nicely and i'll give you the link. Google is your friend though.
Click to expand...
Click to collapse
Dude ffs you sound like "get on your knees and beg me for kindly giving you the link". For real? C'mon...
/edit Or maybe you are trying to get more posts?... Who knows?
Tapped with Xperia Play running AOKP 4.0.4 Milestone 6
olokos said:
Dude ffs you sound like "get on your knees and beg me for kindly giving you the link". For real? C'mon...
/edit Or maybe you are trying to get more posts?... Who knows?
Tapped with Xperia Play running AOKP 4.0.4 Milestone 6
Click to expand...
Click to collapse
I dont know if perhaps that post came off as condescending...but what is odd to me is that the OP asked about V6 tweak, and clearly has some limited knowledge about it, but chose to not read about it and instead wrote a one line post in a completely different forum.
OP should really do a quick xda search - so this way instead of pasting links for others we can test software and help debug/develop it - and maybe learn a new thing or two.
tincbtrar said:
If you are talking about the supercharger script...there is a whole thread dedicated by the developer.
Its is not a simple click and profit situation. Do some research and give it a shot on your phone.
Click to expand...
Click to collapse
That right! I've read all pages and I don't know anythings
langaking said:
That right! I've read all pages and I don't know anythings
Click to expand...
Click to collapse
Then do yourself a favor.... Go back to stock, relock your bootloader and don't look back. If you've read the thread you would need to ask about it here. The first couple posts tell you everything and no one can answer your questions about it better than the dev. Yes, it will work with any android device. Some platforms have different things that need to be done than others (last I looked at it at least) and there are instructions and links for everything in the first few posts.
Sent from Kangdemnation
WTF?
Are you talking about Andy's tweaks for Sense 3.6 ROMs?
I think this is for v6 supercharger
I've been using the v6 supercharger script on the gb energyrom for the past week or so. I've noticed a big difference...
Sent from my ADR6350 using xda premium
Jizzylax said:
WTF?
Are you talking about Andy's tweaks for Sense 3.6 ROMs?
Click to expand...
Click to collapse
no, it's a init.d script..
langaking said:
How can I use this tweak?
Click to expand...
Click to collapse
I've used it a bit. Here are the full steps to get it to work.
1. Find the thread that the dev created for it.
2. Read the instructions there.
3. Download the required files and apps.
4. Follow the instructions that you read in step 2.
Sent from my ICS Dinc2
*Edit* Come to think of it those are the instructions that I use for just about everything I find on XDA.
I've used the supercharger script on the aeroevan's unofficial CM9 rom and macrodroid's ArcticICSed rom with no issues.
Warning....., if you installed the AndyBones tweaks for the Arctic rom (or Tazz's 3.6 ICS) and then run the Supercharger script, you will end up with a blank wallpaper and a reflash is needed to fix it. The Supercharger script will modify your build.prop and init.d scripts (plus install a S99 script) will may conflict with the tweaks program (the Rosie tweaks in the tweaks program include modded winfree values which may be the cause of the conflict).
I hate bringing up an old topic but didn't want to clutter with a new post I'm running aeroeven cm10 does the v6 improve it much I've been reading the main thread and it seems like a lot of mixed emotions on it my thing is the rom I'm running is really smooth and only gets laggy when too many tasks are running a simple task killer fixes it so my question is what do you guys think of it is it worth it or not and is there any draw backs and what addons are you running with it as I saw a lot of options with it I would normally just go for it without asking but with all the options and my current schedule I don't have time to really test everything out
Sent from my Incredible 2 using xda app-developers app
Has anyone used V6 SuperCharger with TSM UKB II 1.3.1 with success?
I know one of the files were patched to work with it, but couldn't find any word of users using it within the OP.
"service.jar patched for v6 supercharger"
(i would have posted in the OP thread, but I don't have permission )
Can someone chime in that has used V6SC with the ROM in question?
Better yet... give me a "howto" for implementing it?
The V6 SuperCharger thread is pretty confusing for newcomers to that concept.
(note: I am not new to flashing and tweaking ROM's... been doing it for years :angel: )
Thanks in advance!
CalvinAMi said:
Has anyone used V6 SuperCharger with TSM UKB II 1.3.1 with success?
I know one of the files were patched to work with it, but couldn't find any word of users using it within the OP.
"service.jar patched for v6 supercharger"
(i would have posted in the OP thread, but I don't have permission )
Can someone chime in that has used V6SC with the ROM in question?
Better yet... give me a "howto" for implementing it?
The V6 SuperCharger thread is pretty confusing for newcomers to that concept.
(note: I am not new to flashing and tweaking ROM's... been doing it for years :angel: )
Thanks in advance!
Click to expand...
Click to collapse
Yes, it works. Just download the script and run it with Su using script manager (or if u want to go old school, use terminal)
Sent from viperDIX B4
I think I´m still a few posts shy of the 10 post magic limit. So I will post it here instead of the developer thread.
As I´m still very much a noob concerning android ROMS, kernels etc, I have a question regarding installation of this ROM.
More specific this line in the installation instructions:
4.Restore my CWM backup > restore system & data for Supercharger V6 optimisations full effect (don't worry, CWM backup is made after a clean restore, so data is clean except Supercharger V6 files)
What I did was reboot into recovery -> "backup and restore" -> "restore" -> choose Milan's .587 v2.1 backup.
Do I need to take additional steps to get it Supercharged?
How can I tell if its supercharged?
Run the SuperCharger script.
Sent from my CM9'd Arc
XperienceD said:
Run the SuperCharger script.
Sent from my CM9'd Arc
Click to expand...
Click to collapse
Thanks
However now we are venturing into uncharted territory for me.
According to this guide: http://forum.xda-developers.com/showthread.php?t=1334834&highlight=install+supercharge
I need to install Script Manager and run the script. Is that correct?
If it is, the problem is the Supercharged script is not placed in the root of my SD card, as the guide descripes.
If anybody who have Supercharged enabled on Milan's .587 v2.1 could post a step by step guide, I would greatly appreciate it.
Anybody?
I would very much like to Supercharge this ROM.
The only guide I can find is the above mentioned and I´m not really sure it applies to Milan's .587 v2.1.
If you do a restore in CWM it restores both the system and data parts and will already be supercharged. I checked mine by running the supercharger script and it said 100% supercharged.
Sent from my LT18i using Tapatalk 2
Thank you
I have no clue to how Supercharger works.
So just for future reference, how did you check it?
I guess you use Script Manager. But do I need to import the script to run it or is it already placed on the phone since it is Supercharged?
Silentbob78 said:
Thank you
I have no clue to how Supercharger works.
Click to expand...
Click to collapse
Well you've posted a link to ONE of the threads explaining how to install it, so you need to show some initiative, and if you had could have this figured out already.
XperienceD said:
Well you've posted a link to ONE of the threads explaining how to install it, so you need to show some initiative, and if you had could have this figured out already.
Click to expand...
Click to collapse
Thank you for being a jerk about it.
I posted a link to guide showing how to install it. It seems it is already installed on my phone. So with my minimal knowledge of android phones, it seemed to me that it was an entirely different situation. That is why I asked.
If I had the time, I would not even have posted in the Q & A section in the first place. I would have figured it out by myself. As I prefer to do it on my own. However, as my time is very limited, I thought my problem fitted the criteria of the Q & A section. Compared to a lot of the other posts, I don´t think my request is especially outrageous.
However you seem to think I´m asking for to much. Why I have no idea. Maybe you just like being an elitist jerk. Nobody forced you to answer. If you thought me being to demanding, you could just have ignored my post.
I will withdraw my question and leave the Q & A to more apparently suited questions.
Silentbob78 said:
Thank you for being a jerk about it.
Click to expand...
Click to collapse
YAWN.
http://forum.xda-developers.com/showthread.php?t=1045941