Related
guys hello,
i am new at the android "scene"
andd i need some help. a lot of people report that oxygen v2 rc5 is a lot
faster-smoother than htc sense. now from what i read it's based on gingerbread
right? and if so if i flash my DHD will i be able to root? and if yes could you provide
a noob's guide to flash my DHD?
thanx in advance.
Oxygen, isn't that for the standard desire? CM6.1.3 is fast and android stock. Isn't gingerbread yet though.
Sent from my Desire HD using Tapatalk
don't ask me i am the noob here!
Did you find it in the development section for the DHD??
Sent from my Desire HD using Tapatalk
i found it while searching on a different thread and i clicked a link and
there i was:
http://forum.xda-developers.com/showthread.php?t=829734&page=1#
It's for the standard desire.
Sent from my Desire HD using Tapatalk
ok so do you have any other rom to suggest.
i am looking for one that isn't lacking any features,
is stable and has a smoother scrolling look on like an
iphone.
ps: no i don't want an iphone i just want my brother
who has one to stop using the only advantage of his phone
over mine to annoy me.
Just backup your existing Rom and start flashing Rom's. LeeDroid is popular, I run CM6.1.3 which I think is very good. Have a play and see what you like. Enjoy.
Sent from my Desire HD using Tapatalk
one last thing --> how do you flash a new rom???????
Read the sticky threads on the developers thread. You really need to understand what your doing before going any further.
Sent from my Desire HD using Tapatalk
ok thanx, will do.
ok so i got everything figured out. it's not as difficult as i thought
but there's a small problem. i install clockworkmod recovery from rom manager
but when i get into recovery i see the phone with the triangle. then i press
volume+ and power and the menu appears but it only has the 4 basics
no nandroid. what do i do?
sivallakos said:
ok so i got everything figured out. it's not as difficult as i thought
but there's a small problem. i install clockworkmod recovery from rom manager
but when i get into recovery i see the phone with the triangle. then i press
volume+ and power and the menu appears but it only has the 4 basics
no nandroid. what do i do?
Click to expand...
Click to collapse
Sounds like you don't have s-off. If you don't have s-off your recovery will be restored to the factory version when you reboot.
Go to the development section and grab the "one click radio s-off" tool. It will take care of the problem for you.
Sent from my performance enhanced Desire HD
ok gonna try that thanx.
read and do this first
http://forum.xda-developers.com/showthread.php?t=841076
then choose any rom from the development section .. place the downloaded file on your sd card .. reboot into recovery choose install zip from sd card .. navigate to your downloaded file and install
I would recommend Android Revolution HD or Leedroid if you are looking for something very stable ..
ok guys thanx for your help but idecided not
to flash because i did some tricks and now my phone running fine.
1)uninstalled task manager (i am on froyo and you know the rest. haha)
2)uninstalled setcpu (i read somewhere that it may cause problems when running even if not profiles or any sort of overclock are active. that was the case with me, although i will miss the 245mhz screen-off profile.)
3)reduced my widgets and pages from 9 to 3 and 6 to 2 respectively
4)changed some options in launcher pro
these resulted in no more fc's and a lot smoother scrolling in menu, sms, homescreens etc.
despite the fact that when i scroll slowly between homescreens it's a bit laggy.
overall great.
thx again guys. if nothing else, i learnt a lot.
Hi there,
because of I have no permissions to post in the official thread of LeeDroid Gingerbread Version I have to do this here.
I read all pages but don't know if the language is now full patched, so that there is evertyhing in the choosen language.
At the moment I use LeeDroid 2.4, can I update without any problems? Full-Wipe required? Any changes on data-format required?
Originally Posted by schlex2010
Is german language supported ???
Click to expand...
Click to collapse
LeeDroid: Some locales are only partial in the build, think a lot of apps are missing German
Sent from me LeeDrOiD loaded Desire HD using the Android XDA Premium app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=12968676&postcount=341
Still the question when / if that will be changed?!
The most apps are in English;
For me worked.
1. flashing radio
2. wipe cache+data
3. flash leedroid
As we are already talking about the latest version.
Is it possible to transfer any Login data of all my wifi networks?
Will there be a fix for a full german (and other languages) support in near future!?
For your question, I dont think so. Perhaps the keys for wifi are saved in a file, but in my opinion this file could be secured.
This was recently asked in the developer thread. We'll see...
I'm currently back to 2.4 and downloading the new 2.4.1
Yes me too
So as many people do at the same time ^^ online 50kb/sek ... with 1mbit connection -.-
Guys, Since i cant post also in dev section, I have to reply here. I need help. After flashing the leedroid 3.0 A2SD, It was just in the HTC screen for 10 minutes. After failing, I tried to restore 2.4 and I got a message "can't mount /dev/block/mmcblk0p2" and hense, I cannot go back.
Tried to boot up and stuck at HTC screen. Now my phone is just sitting there...
Any help guys??
lawrrtan said:
Guys, Since i cant post also in dev section, I have to reply here. I need help. After flashing the leedroid 3.0 A2SD, It was just in the HTC screen for 10 minutes. After failing, I tried to restore 2.4 and I got a message "can't mount /dev/block/mmcblk0p2" and hense, I cannot go back.
Tried to boot up and stuck at HTC screen. Now my phone is just sitting there...
Any help guys??
Click to expand...
Click to collapse
Go back in the recovery and flash your nandroid backup, which you had made before flashing 3.0?!
Pris0n said:
Go back in the recovery and flash your nandroid backup, which you had made before flashing 3.0?!
Click to expand...
Click to collapse
I did flash my nandroid backup before flashing the 3.0 . It says after "can't mount /dev/block/mmcblk0p2 cant formatsdext. So i reboot after still and Im just stuck in the HTC start up screen
lawrrtan said:
I did flash my nandroid backup before flashing the 3.0 . It says after "can't mount /dev/block/mmcblk0p2 cant formatsdext. So i reboot after still and Im just stuck in the HTC start up screen
Click to expand...
Click to collapse
You have what is called a USB brick! It's happened to me too many times...
you will need to download the android sdk if you don't already have it, and then go to the android sdk 'tools' folder in the command prompt.
then type the following command 'fastboot oem enableqxdm 0' and then 'fastboot reboot'
problems you may have; 'adbwinapi.dll' something like that is not found - a quick search on google should find you what you need!
Trackball
Where is the trackball unlock?
Sent from my HTC Desire using XDA App
In my opinion this release of 3.0 is an very early one, not like a beta, but also not a RC or Final. So we all have to wait
HikerMan said:
You have what is called a USB brick! It's happened to me too many times...
you will need to download the android sdk if you don't already have it, and then go to the android sdk 'tools' folder in the command prompt.
then type the following command 'fastboot oem enableqxdm 0' and then 'fastboot reboot'
problems you may have; 'adbwinapi.dll' something like that is not found - a quick search on google should find you what you need!
Click to expand...
Click to collapse
I have already done the command prompt commands and it rebooted itself. But its still in the HTC logo part still? is it normal? its been 5 minutes already
lawrrtan said:
I have already done the command prompt commands and it rebooted itself. But its still in the HTC logo part still? is it normal? its been 5 minutes already
Click to expand...
Click to collapse
Well if you have successfully fixed the sd card problem, you should be able to now restore your backup, so do that!
HikerMan said:
Well if you have successfully fixed the sd card problem, you should be able to now restore your backup, so do that!
Click to expand...
Click to collapse
Im sorry for the noob question, how will i fix the sd card problem? should i reformat it then transfer back the files after?
lawrrtan said:
Im sorry for the noob question, how will i fix the sd card problem? should i reformat it then transfer back the files after?
Click to expand...
Click to collapse
Doing the command prompts is not going to fix your phone yet; it is going to fix the problem you have where you 'Can't mount...' - this is the source of your problem. So if you have done the command prompts then you should be able to access your sd card from recovery and therefore restore the backup you made too; restoring the backup should fix the 'stuck on htc logo' problem you are having
Does anyone know if 3.0 has plans for TUN/TAP support for OpenVPN?
LeeDroid said that help PERHAPS will check if there Iser a solution for the vpn problems.
Now I had flashed 2.4.1. Running stable André without problems.
I will wait some days and check the 3.0 later when it's full stable and translated.
Sent from my HTC Desire using XDA App
Pris0n said:
Is it possible to transfer any Login data of all my wifi networks?
Click to expand...
Click to collapse
wondering the same... is there an app that saves/restores wifi settings (or a file we can save from the filesystem)
2.4 to 3.0?
Hi all,
Sorry to hijack the thread. But I have some questions on flashing GB 3.0.
My Desire info are as follows:
HBoot 0.93
Radio 32.44.00.32U_5.09.05.30_2
LeeDroid 2.4
I'm considering trying out GB 3.0 but i'm nto sure if the new rom can be supported on my phone (software info as above).
Will anyone the ROM work for me? Can my apps+data from Froyo 2.4 be restored back using Titanium Backup and work on GB 3.0?
Hi guys ! I have a Desire rooted & S-OFF and i want to flash cm7r2 hboot to install Runnymede 6.1 with INT2SD. I've burnt a CD with alpharev.iso and booted on my pc ...but after it recognizes my phone it asks me about recovery,etc. so it wants to S-OFF my device. i don't want that,because i've already done this. i just want to flash cm7r2.so where should i type that "fastboot flash hboot.." etc ? do i need some apps installed to pc? (i use windows 7) Oh,and another thing: i'm using Runny rom. can i flash a hboot with a rom installed on my phone ? or should i wipe everything before that?
Thanks in advance
have you googled or searched in xda?
there is a thread called android flasher. check it out.
thanks, i'll try that ! yes, i searched on google, but i found just about this method, with boot from cd.
go to alpharev site, download the PB99IMG.zip file (or the one attached) put it on your SD card and re-name it PB99IMG.zip. boot you phone into bootloader and it should give you the option of changing the hboot after the initial SD card check. clear data and then reboot back into bootloader and it should have changed. much easier than farting around with fastboot etc.
exocetdj said:
go to alpharev site, download the PB99IMG.zip file (or the one attached) put it on your SD card and re-name it PB99IMG.zip. boot you phone into bootloader and it should give you the option of changing the hboot after the initial SD card check. clear data and then reboot back into bootloader and it should have changed. much easier than farting around with fastboot etc.
Click to expand...
Click to collapse
tried that, but it says "No image or wrong image!" , so i decided to try via fastboot . i've used Fastboot Commander v1.51 and it seemed to be ok. but after i had flashed the cm7r2, i opened receovery and received an error : "can't open /cache/recovery/log" Is that importatnt ?
Thanks !!
rares1235 said:
tried that, but it says "No image or wrong image!" , so i decided to try via fastboot . i've used Fastboot Commander v1.51 and it seemed to be ok. but after i had flashed the cm7r2, i opened receovery and received an error : "can't open /cache/recovery/log" Is that importatnt ?
Thanks !!
Click to expand...
Click to collapse
not hugely as far as im aware, i have had the message before and nothings broken lol. No probs! (hit the thanks button if helped )
exocetdj said:
not hugely as far as im aware, i have had the message before and nothings broken lol. No probs! (hit the thanks button if helped )
Click to expand...
Click to collapse
hey ! now i have another problem ) i have a 4 gb card (class 2) with an ext4 partition (1gb) and i've installed the runnymede rom with int2sd-s. now i have 1 gb internal memory, but my desire is very very laggy. I don't know why, but it keeps freezing and i have to wait a few seconds till an app opens. the browser,settings and sense ui are slower than before. Is the card my problem ? Should i buy a class 6 (or 10) one ? Please help !
Thanks
If you are going to run a Sense based rom, it's ideal that you use a class 4 sd card or higher. I heard class 6 is the sweet spot but I'm not sure.
stankyou said:
If you are going to run a Sense based rom, it's ideal that you use a class 4 sd card or higher. I heard class 6 is the sweet spot but I'm not sure.
Click to expand...
Click to collapse
I hope that's the problem ) i think i'll buy a PNY microSDHC 16GB class 10 .. i found it on an online store at about 20£
maybe that will solve my problem(hopefully) . but i have another question .. what happened with my internal memory (that 120mb..) ? can it be possible to be the reason for this ? maybe it's full or.. i don't know.
rares1235 said:
hey ! now i have another problem ) i have a 4 gb card (class 2) with an ext4 partition (1gb) and i've installed the runnymede rom with int2sd-s. now i have 1 gb internal memory, but my desire is very very laggy. I don't know why, but it keeps freezing and i have to wait a few seconds till an app opens. the browser,settings and sense ui are slower than before. Is the card my problem ? Should i buy a class 6 (or 10) one ? Please help !
Thanks
Click to expand...
Click to collapse
I am aware that this version of Sebs (?) rom is a beta so may be due to that. I have a class 4 card and every sense rom i have flashed has run ok with relatively little or no lag at all. As a standard, i just use the CM7 r2 hboot with the ad2sd+ scrip from amarullz. still gives 600MBish of internal memory and runs pretty slick
exocetdj said:
I am aware that this version of Sebs (?) rom is a beta so may be due to that. I have a class 4 card and every sense rom i have flashed has run ok with relatively little or no lag at all. As a standard, i just use the CM7 r2 hboot with the ad2sd+ scrip from amarullz. still gives 600MBish of internal memory and runs pretty slick
Click to expand...
Click to collapse
That sounds good. I think i'll reflash the rom with the adsd+ till i'll buy a new card and the rom will be stable. thanks'
Should give you the option in the aroma installer, need to select custom install. also on the next page of the installer be sure to select market too. (not sure about the 6.1 Beta of seb's rom but on other versions it does, alternatively give the RunnyRom a try )
http://forum.xda-developers.com/showthread.php?t=1526831
had RunnyRom before, but i uninstalled it because i believed that htcsense was a problem of the rom, but i've just found on the forum that it's a htc problem (i was receiving the notification "wrong password"). Yes, the option is in the aroma installer, but i 've selected int2sd (thought it's better) .
off: what memory card do you recommend me: PNY or Verbatim ?
rares1235 said:
had RunnyRom before, but i uninstalled it because i believed that htcsense was a problem of the rom, but i've just found on the forum that it's a htc problem (i was receiving the notification "wrong password"). Yes, the option is in the aroma installer, but i 've selected int2sd (thought it's better) .
off: what memory card do you recommend me: PNY or Verbatim ?
Click to expand...
Click to collapse
I would advise against int2sd, but that's on my personal experience. A really good sd card is sandisk 16gb class 4. But samsungs are pretty good as well, as are Adata.
Do you think that if i'll flash a new radio(or kernel) it will be smoother? I don't know too much about radios/kernels so i'll wait for your answers.
and another thing: can i flash the fatsys hboot after i flashed cm7r2? because i heard there are risks when you try to downgrade the hboot (brick), so i'm afraid of
something like this would happen when i will flash this hboot. Thanks
Can someone answer to my question, please ? thanks
Sent from my HTC Desire using XDA
rares1235 said:
Do you think that if i'll flash a new radio
Click to expand...
Click to collapse
no
rares1235 said:
(or kernel)
Click to expand...
Click to collapse
maybe
rares1235 said:
and another thing: can i flash the fatsys hboot after i flashed cm7r2? because i heard there are risks when you try to downgrade the hboot (brick), so i'm afraid of
something like this would happen when i will flash this hboot. Thanks
Click to expand...
Click to collapse
flash downgrader then fatsys hboot. if done properly, you will NOT brick.
Ok then. I will do these things after I'll buy a new memory card. thanks for answers.
Rares
exocetdj said:
I am aware that this version of Sebs (?) rom is a beta so may be due to that. I have a class 4 card and every sense rom i have flashed has run ok with relatively little or no lag at all. As a standard, i just use the CM7 r2 hboot with the ad2sd+ scrip from amarullz. still gives 600MBish of internal memory and runs pretty slick
Click to expand...
Click to collapse
I've just seen in 4ext recovery in the info tab (as i remember) that i have only 20mb free out of that 145mb from the system. Could that be the problem of the lag ? (I've attached a printscreen of the Quick System Info Pro) ..so, any ideas?
Alright, so sometimes people have a crazy hard time getting a recovery or ROM or kernel to flash and it can be very difficult to resolve in some cases. So I had an idea! What if people could flash the different things from HBOOT with a PG76IMG?!
Well, now you can! I will be making PG76IMGs for anyone who wants them (and has a Marvelc). I will be taking requests for any (existing) Marvelc ROM/Recovery/Kernel/Radio/HBOOT and I will make splash screens for whoever wants them (if you provide a 320x480 image). If you see "[S-OFF]" next to any PG76IMG that means your HBOOT must say "SOFF" somewhere on it.
More will be added as time goes on.
VMUSA FOTA [S-OFF]
WoefulDerelict's TWRP 2.2.20 Marvelc
Just gonna take the second post for if I need it...
So can the marcvelc flash things like hensemod or wildchild?
I would love a pgimage of ANY stable rom that I can use data2sd or links2sd on since I've never been able to get a single rom to flash correctly.
willpower102 said:
So can the marcvelc flash things like hensemod or wildchild?
I would love a pgimage of ANY stable rom that I can use data2sd or links2sd on since I've never been able to get a single rom to flash correctly.
Click to expand...
Click to collapse
HenseMod and WildChild are not compatible with the Marvelc.
in your opinion what is the best marvelc rom out right now?
Basically I want this:
Gapps + Sync - I can install gmail and gtalk if need be
Sense - Mainly for contacts in dialer
Facebook sync
Wifi Hostpot
Data2sd - Or link2sd as long as it works. In my experience link2sd still fills up the limited memory on this phone I need a set it and forget it mode.
I really don't think I'm asking too much, but the marvelc seems to be lacking
willpower102 said:
in your opinion what is the best marvelc rom out right now?
Basically I want this:
Gapps + Sync - I can install gmail and gtalk if need be
Sense - Mainly for contacts in dialer
Facebook sync
Wifi Hostpot
Data2sd - Or link2sd as long as it works. In my experience link2sd still fills up the limited memory on this phone I need a set it and forget it mode.
I really don't think I'm asking too much, but the marvelc seems to be lacking
Click to expand...
Click to collapse
I will have a Sense 2.1 ROM out soon. No ETAs, but I can say it will be available soon with most all of those features. Data2SD will not be enabled by default, but you'll be able to flash it if you want.
willpower102 said:
in your opinion what is the best marvelc rom out right now?
Basically I want this:
Gapps + Sync - I can install gmail and gtalk if need be
Sense - Mainly for contacts in dialer
Facebook sync
Wifi Hostpot
Data2sd - Or link2sd as long as it works. In my experience link2sd still fills up the limited memory on this phone I need a set it and forget it mode.
I really don't think I'm asking too much, but the marvelc seems to be lacking
Click to expand...
Click to collapse
yeah that looks reailly inticeing
i have a nexus 7 and will need hotspot
Excuse me I have a HTC Wildfire s s-off marvelc and I want to flash a cmd rom, but everytime I try it says installation aborted
where do I get the PG76IMG file that supports my device and what cmd rom would work. Can you please provide links? Thank You
Could I ask for one of woefuls twrp? Just wiped my comp and would like to try the offline charging fix.
Sent from my Marvelc using Tapatalk 2
BigChillin said:
Could I ask for one of woefuls twrp? Just wiped my comp and would like to try the offline charging fix.
Sent from my Marvelc using Tapatalk 2
Click to expand...
Click to collapse
Added.
http://forum.xda-developers.com/attachment.php?attachmentid=1288909&stc=1&d=1346195666 (Or see the OP)
Hi guys,
I'm using the 'RSK team sense 3.5 with amaze cam' rom on my desire and was hoping to disable the trackball unlock feature. It keeps unlocking in my pocket and it's really frustrating. I've seen a few fixes around: one that fixes stock and one that fixes cm7 and was wondering whether these can safely be applied, or whether I need a specific fix for this rom OR, alternatively, whether there is a menu option hidden in the rom somewhere I'm just not seeing.
The fix I found for stock and cm7 is this one: http://forum.xda-developers.com/showpost.php?p=14453689&postcount=10687
Thanks for your help!
I think that the option for T2U is in RC mix tweaks option.
Sent from my HTC Desire using Flashes and Thunders
nlooooo said:
I think that the option for T2U is in RC mix tweaks option.
Click to expand...
Click to collapse
There's an option in the aroma installer, but it doesn't appear to work. And although there's an option in the tweaks 3D settings for volume-key wake, there doesn't appear to be one for trackball :S
yh the option is in aroma setup like said above. u could look in the attachments of the rom thread coz theres sometimes zip files u can flash in recovery to disable/enable trackball wake etc etc
Sent from my HTC Desire
Did you ever get to the bottom of this? I'm also using the latest RSK rom and the trackball unlock is really bothering me and there doesn't seem like a way to turn it off.
Tell Me Where is Gandlaf said:
Did you ever get to the bottom of this? I'm also using the latest RSK rom and the trackball unlock is really bothering me and there doesn't seem like a way to turn it off.
Click to expand...
Click to collapse
Like i said above, the answer and zip file is there. Go to desire android development, go down to RSK rom and at the end of the rom title there is a wee paper clip (thats the attachments) click it, zip file there + other usefull sh*t.
:banghead: :banghead:
Sent from my HTC Desire
jmcclue said:
Like i said above, the answer and zip file is there. Go to desire android development, go down to RSK rom and at the end of the rom title there is a wee paper clip (thats the attachments) click it, zip file there + other usefull sh*t.
:banghead: :banghead:
Sent from my HTC Desire
Click to expand...
Click to collapse
Thanks jmcclue, didn't realise you could get to attachments that way.
Installed Deactivate_Trackpad_To_Unlock_Stock.zip from ClockworkMod Recovery (I don't have CM7 hboot) but still the trackpad unlocks..
Tell Me Where is Gandlaf said:
Thanks jmcclue, didn't realise you could get to attachments that way.
Installed Deactivate_Trackpad_To_Unlock_Stock.zip from ClockworkMod Recovery (I don't have CM7 hboot) but still the trackpad unlocks..
Click to expand...
Click to collapse
Hmm... Ok. U could try look in other sense 3.5 roms for the correct 1. This is probably not recommended but i used to do it all the time with sense 3.5 roms and never had a problem. Just nandroid first before flashing anything
Sent from my HTC Desire