Related
Hi all,
Does the XDA2s and Microsofts Voice Command work on a XDA2s?
I'm not English, but I'm sure my English is good enought!
Whenever I give a voice command I get a "please repeate" error..
I think it's something with the mic gain, but where and how do I set it lower? Enabling/Disabling the Microphone AGC settings did not really help!
Any suggestions?
You should rather forget about this application. I tried to use it but with no success, exactly like you. Then I tried other applications (with the same result) and finally I followed suggestions from this forum: Neuvoice - it works and it's cheap.
Rgds
Maciej L
Maciej L said:
You should rather forget about this application. I tried to use it but with no success, exactly like you. Then I tried other applications (with the same result) and finally I followed suggestions from this forum: Neuvoice - it works and it's cheap.
Rgds
Maciej L
Click to expand...
Click to collapse
Thanks Maciej L,
Yes I think I will dump it.. It really sucks...
Looks nice the Neuvoice. To bad there is no demo to test it 1st
Yes there is a demo version, just download the full version from somewhere and it works as demo until you purchase the unlock code (as far as I can remember - but I'm not 100% sure - so you should by yourself)
Rgds
Maciej L
XDA IIs Fonix Application
I have just received my XDAIIs upgrade from an XDA II and it comes complete with Fonix Voice Dial. It automatically records test voices against your contacts (name number) and then you can call it up any time. You can also record your own voice which makes it more efficient. It also works with bluetooth. It seems an OK applicaiton to me.
Is this what you have been talking about? :lol:
In a quiet environment, it really doesn't have any problems with recognizing my commands. As long as you don't have a terrible English accent. However, you can forget about if you are in a loud environment though.
of where you have downloaded it to you.
I don't find any demo in any place
greetings and thank you
XDA IIs Voice Software
I got mine with the XDA IIs cd but try Handango.com who have a good range of voice software including Vito Voice....
you have registered in your cd ?¿?
regards
Voice Command 1.5
well, I have to say MS Voice Command works great for me. 95% hit rate on about 1000 contacts in my xdaIIs. Even in the car. Far better that V1.01. A couple of tips from my experienece with it.
1. Make sure the microphone auto gain is "disabled"
2. If it initially has problems and hit rate is very low, a soft reset usually sorts it out
3. Map the "record" button to Voice Command for easier access.
4. If your car is noisy, use a wired head set while driving. (I have not been able to get the bluetooth voice dialing to work at this point)
Re: Voice Command 1.5
cbrow51 said:
well, I have to say MS Voice Command works great for me. 95% hit rate on about 1000 contacts in my xdaIIs. Even in the car. Far better that V1.01. A couple of tips from my experienece with it.
1. Make sure the microphone auto gain is "disabled"
2. If it initially has problems and hit rate is very low, a soft reset usually sorts it out
3. Map the "record" button to Voice Command for easier access.
4. If your car is noisy, use a wired head set while driving. (I have not been able to get the bluetooth voice dialing to work at this point)
Click to expand...
Click to collapse
Hmmm... With none of the Voice dial programs I've been able to get the bluetooth to work.. Not sure if it's the bluetooth unit itself, or if it's some ROM version thingy...
The BT headset is a SE HBH-600. The XDA2s is with ROM version 1.12.62 WWE and radio version 1.02.00.
Can/will this work with bluetooth voice dialing??
MS Voice Command & BT Voice Dialing
No, sorry, I have not been able to make it work. I think its still an issue with the implementation of the BT stack (in this case the Widcomm stack) on the HTC devices. I can establish a connect from my headset to the device, but does not "link up" with voice dialing.
I now use a regular noise cancelling wired headset in the car, via an adapter plug sold by PockPCTechs (www.pocketpctechs.com) Other wise just use the phone mic to initiate a voice command dialed call
Regards
Chris
Re: MS Voice Command & BT Voice Dialing
cbrow51 said:
Other wise just use the phone mic to initiate a voice command dialed call
Click to expand...
Click to collapse
I was going to ask how well this works?
I'm getting a BT car kit fitted literally in the next hour and was hoping I'd be able to voice dial like I could my old Nokia, while driving.
I am using
O2 xda2s with microsoft voice software
I have a fairly noisy sports car but it works well..
I have the voice mapped to contacts button so one press and direct voice towards pda and no botha.... about 95% hit rate on 200 contacts..
I must add it has only been that good since buying a brodgit car cradle so it positioned well.. obviously you have to turn stereo off
the only complaint i have with it is that when the voice speaks back to you to confirm what you have said I cant hear it very well..
does anyone know of any settings to improve audio levels..
cheers
stay happy
Hi Guys
I have upgraded my 'Voice Command' handsfree solution as follows.
1. Added an FM 'Sound Feeder' from Pocketpctechs, that connects to the xda via one of 2 different pocketpctechs audio adaptors.
2. Tune the radio to one of the 8 frequencies supported by the Sound Feeder and the xda then plays all audio output through the car stereo system. This works for all apps, including my Navman GPS and Media Player!. I also mapped a button (I used the record button) to Voice Command, so one press activates VC and I can initiate a call by voice from there.
The really nice thing about this arrangement is that if i have media player running through the system, and a call comes in, the music mutes automatically, the phone rings, and i can take the call. When you end the call, media player picks right up again!
3. For the microphone part, there are 2 options:
a. The one I am using right now, is to use the pocketpctech 'single' adaptor, that allows sound to play through the stereo, while keeping the mic of the xda active. This means the xda picks up your voice directly for voice command and telecons, while at the same time playing the sound you normally hear via headphones, through the stereo. This works great for the incoming voice, although you need to talk fairly loudly for the party calling to hear you well. Decent enough though...
b. The upgrade I will make this weekend is to use the 'dual' pocketpctechs adaptor. This one accepts the soundfeeder on one side, plus a regular 2.5mm heasdset on the other. This one disables the internal xda mic, and allows you to use the mic from the headset. So I plan to permantly position this mic (after cutting off the ear bud!) on the door pillar as in normal car hands free installs. This should improve the outbound sound a good bit....
Will let you know how I get on
Regards
Chris
In the end, the Parrot CK3100 car kit has its own built in voice recognition, so I have no worries
Great! I looked at the Parrot a while back. How much was it? Work ok?
Regards
Chris
Well, I've not really had chance to test it properly yet, seems to be good. Cost me £180 to have it fitted, the old one removed and a bit of extra power wired in for my GPS & PDA.
Hi Andy
Sounds good. Let us know how it works out for you. I am interested in how the bluetooth connection holds up. I am still having problems with my xda maintaining a connection with my bluetooth headset.
Regards
chris
Hi, I'm a first time poster and I'm on the verge of pulling my hair out.
I have an SPV M600 and have just bought a Pioneer DEH P75BT car stereo because of its bluetooth capabilities.
It has two bluetooth modes: Telephone and BT Audio. After a lot of playing around I have managed to get both modes working together....ish!!!
I've installed the A2DP hack from this site enabling the streaming audio which actually sounds fantastic through the car speakers.
The problem is that to get the BT Audio to work I have to delete and repair the phone with the stereo every time I get in the car. This involves the following actions:
Open Comm Manager
Tap settings
Tap bluetooth settings
Tap devices
Tap and hold the Pioneer BT unit
Tap delete
Tap yes to confirm deletion
Tap new partnership
Wait for scanning to complete
Tap the Pioneer BT unit
Tap next
Enter passkey (four taps)
Tap next
Tap finish
As you can imagine, this process is a real pain in the backside every time I get in the car so my question is this.
Can the above actions be automated in just one command? If so how? (bearing in mind I do not really know how to write scripts)
If someone could even point me in the direction of learning to write a script for this I would be grateful. I have downloaded and installed MortScript but I don't really know what I'm doing with it.
Why when you tap and hold the device doesn't the "set as wireless stereo" command work the same as when the stereo and phone are newly paired? Surely it's the same command.
Any help would be gratefully received.
Can't help you except to say that I experienced the same with a pioneer BT radio too. My soolution was to return it to the store and buy myself a parrot BT car kit which works just fine...
JRH said:
Can't help you except to say that I experienced the same with a pioneer BT radio too. My soolution was to return it to the store and buy myself a parrot BT car kit which works just fine...
Click to expand...
Click to collapse
Luckily I don't give up this easily. I have played around with and taught myself the basics of mortscript and have managed to write myself a script that does all of the above in one command. It's not quite perfect yet but it does mean that I can get in my car and start driving whilst the phone is busy pairing itself with the stereo.
The problems I am having so far are as follows:
I have to soft reset the phone each time before pairing with the stereo, otherwise the audio only seems to be transmitted to the front left speaker in my car, which is a bit strange.
I am forcing mortscript to try to pair with the first device in the list of detected devices, which is fine if there's no-one alse with a bluetooth device in the vicinity but not if there is and it detects theirs before mine.
Does anyone know if I could get mortscript to select a detected device by it's name "Pioneer BT unit" rather than selecting the device by simulating a tap on the screen? Also, if the device called "Pioneer BT unit" is not found the first time, scan for bluetooth devices again.
Any help would be much appreciated.
Hello I had the same problem: erase, new, etc.
but i have discovered one thing: you must only change de name in the bt description of your hands free
neomagik said:
Luckily I don't give up this easily. I have played around with and taught myself the basics of mortscript and have managed to write myself a script that does all of the above in one command. It's not quite perfect yet but it does mean that I can get in my car and start driving whilst the phone is busy pairing itself with the stereo.
The problems I am having so far are as follows:
I have to soft reset the phone each time before pairing with the stereo, otherwise the audio only seems to be transmitted to the front left speaker in my car, which is a bit strange.
I am forcing mortscript to try to pair with the first device in the list of detected devices, which is fine if there's no-one alse with a bluetooth device in the vicinity but not if there is and it detects theirs before mine.
Does anyone know if I could get mortscript to select a detected device by it's name "Pioneer BT unit" rather than selecting the device by simulating a tap on the screen? Also, if the device called "Pioneer BT unit" is not found the first time, scan for bluetooth devices again.
Any help would be much appreciated.
Click to expand...
Click to collapse
I was just about to point this fella in your direction ...
You'd have to do an indefinite loop while checking a registry value to see if your stereo was found. There is a key, i'm sure, for a list of found devices but I don't know where that is. As for detecting your car stereo as the one to pair with; depends on what keys are saved, sounds like it may just be possible.
I'll have a look into this as I'd like to get this stereo also if it can connect & stream automatically
If returning it is still an option, I'd get the Sony Bluetooth Audio headunit. Works great for listening to audio from your phone. It pairs it automatically. I also use Jawbone headset for talking on the phone. It kicks off the stereo and goes to the headset when a call comes in.
The built in mic is in the headunit and in my loud car, its subpar in quality. Whicj is why I use the excellent Jawbone.
I personally own a Peekton 950 car stereo and it works great with my wm5 (a2dp enabled) and my new WM6. the only thing that it does not do is autodiscover and connect the A2DP while it does it for the headset profile.
one other thing I would enjoy is to have the idtag displayed while getting the A2dp but I guess this is not part of the spec.
As I wrote in this topic, I guess the A2DP profile has two way of linking.
1°) The "headset" way : a bluetooth A2DP headset initiates communication to the music player/WM device.
2°) The "passive" way : The speaker just waits for a known bluetooth audio player to connect/link to it.
What surprises me is the fact you need to unpair-repair your device everytime : have you tried what I explain in the previous topic : just go to bluetooth devices , long tap on your spearker's name and choose "use as bluetooth speaker" (may not be exact name of the option since I've a French phone ).
On my phone, this simple (but annoying enough) action connects my phone to my bluetooth speaker (not an in-car one).
Hope this helps
PS : If you find any way to script/automatize the connection or any app more convenient than opeining the bluetooth setting, I'd be very pleased to be informed
This probably wont help the OP's problem, but for the rest, this freeware is brilliant, and can be automated using command line switches to work via mapped keys.
http://www.teksoftco.com/index.php?section=freeware
Surur
Many thanks for this piece of software Susur. I tried it, but I didn't manage to use it to initiate connection to my bluetooth a2dp speaker.
It's a very usefull software when your device is connected to an A2DP speaker/headphone.
There is a DIY option bluetooth headset acting as audio receiver.
http://www.grynx.com/projects/bluetooth-stereo-in-the-car/5/
does anyone know if you can send the google navigation voice over BT to a BT speaker/car kit?
Yep, works for me - it interrupts any music you may be playing from the phone.
And how do you do it? I have a Nokia Bluetooth carkit which works fine for phone calls but I don't know how I can play music or have the navigation voice speaking through the car speakers?
@thewebface
What make of car kit do you have thewebface? I suspect a lot of the bluetooth features depend on the carkit.
thanks
LM
It's an original Nokia CK-7W.
I've got a Motorola T505 bluetooth carkit / FM transmitter and Desire does work fine with it for both navigation and music. Out of the box configuration, no parameter setup needed.
The feature I liked most was that I could set up individual volume levels for each application running in parallel (i.e. max volume for calls, 2/3 for navigation, 1/3 for music) and then control the general volume from the car stereo.
I've got Bluetooth built in to my car, will this do the same thing?
Didn't even know you could do that! I bought Co-Pilot, is it possible with that too?
Would be great if it was as at the moment Im using Front Aux on the head unit which is cutting out all the music!
Running CM6 9-25 nightly with latest radios:
I recently installed vlingo on my evo and successfully managed to remap the h2headset.kl entry for the bt button from headsethook to search in an attempt to get the voice recognition button on the parrot to launch the Vlingo search.
When i do get the voice prompt though i find that the parrot tries to play back whatever music i'm playing via its speakers as a mono bt stream. There is no option in the bluetooth device properties to turn off audio as the parrot isn't an a2dp device and therefore only has the phone profile.
My question is, does CM6, or the stock stack for that matter, automatically try to stream the audio out via bt no matter what the device? I was never able to get audio out to the parrot without using some kind of bt mono out hack.
Maybe this should be posted on a car forum (actually tried that and never got a response). But i was hoping someone might know of a way where i can by pass the voice control built into the radio of my kia soul, and instead just use the voice control built into android but using the BT mic and speakers in the car? i.e. have the bt system in the car act like a bt headset
Not entirely sure its possible.
Your BT in your vehicle is trying to use voice commands to control your phone, and you would rather use the IN PHONE voice commands and not allow the KIA to control your phone.. right?
Aside from using the audio input feature and allowing the phones mic to operate.. i dont think its currently possible.
right - i want the car to be dumb and just relay everything to/from the phone without trying to do anything itself. Right now when i connect the phone to the car, it downloads a copy of the phone book and i dial by telling the car who i want to call and it then tells the phone to call them.
Man if there's no way to disable the car's voice controls, that's incredibly short sighted of whoever makes the BT system in the car. I guess it's too much to hope that they even considered making the controls updatable through USB or something huh?