OK here's the deal. I rooted my wife's Inc 2. Put on miui the newest version. Then I put on tiamat 1.1.5 kernel. When u turn on wifi, make a call or restart the phone bye battery pull or power button it will lose 3g. It is impossible to get it back. I have tried everything that I can think of. Airplane mode, wifi on and then off, restarting phone check all options that could affect it. I have tried with the miui kernel and no luck. Also I have the same setup on my phone and I have no issues. If anyone has any ideas on why this is happening I would love to hear them.
You should try updating the kernel, that will most likely solve your problem.
Do u mean just a different kernel?
fbmustang69 said:
Do u mean just a different kernel?
Click to expand...
Click to collapse
Tiamat works great with miui. My first flash borked the wifi too, and a simple reflash of the same kernel fixed it. The kernel included with miui is from cyanogenmod, i believe, and it works fine too.
Do you use a script to wipe the old kernel before installing the new one?
I use the ultimate kernel cleaning script v2 and have had no issues with tiamat.
Thanks for the ideas I will try them out.
Can you give us a feed back I am desperate ,
I downloaded miui from rom manager and miui.us. If I used miui rom from miui.us 3g did not work. If i used the one from rom manager it did work. I know it weird but i was using the one from rom manager on my phone and the 3g was working. Since i didnt put rom manager on her phone i used miui.us. so when I put rom manager on her phone and used that it worked. I dont know why this happened just glad she gets 3g again.
With MUIU right ? i will try it soon , thanks for the idea
It's weird but if i get get back my 3G with it i will use it
If you can run other rom as virtuous an confirm that this method work ,it will be grateful and more hopeful , now too many guys include me are in this situation.
Thanks in advance now five days without 3G, is terrible
up
Any idea here ?
i used rom manager to download miui and the 3g worked. when i used the download from miui.us it 3g did not work. Im also not using miui kernel if that matters. i have used tiamat 1.1.5. i'm Using aeroevan_inc2-0.4 kernel now.
Related
Hello can someone help me, I have just flashed latest nightly CM7 build. My call drops after proximity sensor turns off screen. I tried flashing latest radio but it still drops calls, I get message: "Out of service area"
zoky4 said:
Hello can someone help me, I have just flashed latest nightly CM7 build. My call drops after proximity sensor turns off screen. I tried flashing latest radio but it still drops calls, I get message: "Out of service area"
Click to expand...
Click to collapse
What build are you using?
I flashed build 31 , but it was the same with previous builds too
Try a different nightly, one that you know works
Sent from my T-Mobile myTouch 3G Slide using XDA App
Can someone tell which nightly build works fine? Thx
Some people seem to have sat around on 14.
I did myself for a bit. Probably till around 22 or 23.
SefEXE said:
Some people seem to have sat around on 14.
I did myself for a bit. Probably till around 22 or 23.
Click to expand...
Click to collapse
Thank you , I will try it and post result
I tried build 14 but it same thing happens, anyone know why? When screen turns off , phone goes in airplane mode. How can I solve that?
Well let's try to narrow it down.
Do a nandroid, wipe and then flash a different rom, CM 6, CR, or even NB's new rom and just see if the same thing happens.
Or you can try flashing a fresh nightly after wiping.
I flashed CM 6 and it works perfect , but with CM7 it doesen't
Are you using Miguel's kernel? I've noticed with recent builds of cm-7 that my phone wont idle down to min setting like it should. Could cause other problems in different phones.
Sent from my T-Mobile myTouch 3G Slide using XDA App
I don't use Miguels kernel , phone just go to airplane mode when screen turns off in conversation
No one can help me with my problem?
Sent from my T-Mobile myTouch 3G Slide using XDA App
aaldiar said:
Are you using Miguel's kernel? I've noticed with recent builds of cm-7 that my phone wont idle down to min setting like it should. Could cause other problems in different phones.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
Don't mean to hijack a thread, but could you elaborate? I may be having the same issue. Not positive, but I'm running miguels kernel and have had significantly decreased battery life lately.
Sent from my T-Mobile myTouch 3G Slide
Ok , i have rooted the phone , i have s-off and latest radio. I flashed cm7 rc rom , and problem continues , everytime when screen turns off , phone goes automaticaly in airplane mode. Someone please help me if you know what I could do. Thank you
zoky4 said:
Ok , i have rooted the phone , i have s-off and latest radio. I flashed cm7 rc rom , and problem continues , everytime when screen turns off , phone goes automaticaly in airplane mode. Someone please help me if you know what I could do. Thank you
Click to expand...
Click to collapse
Wipe and flash RC1. Back up your user apps with titanium backup, do a factory reset wipe, and flash cm7 rc1, then boot up, restore your user apps, then go through and set all your settings again. Wiping should solve it.
MusicMan374 said:
Wipe and flash RC1. Back up your user apps with titanium backup, do a factory reset wipe, and flash cm7 rc1, then boot up, restore your user apps, then go through and set all your settings again. Wiping should solve it.
Click to expand...
Click to collapse
I tried as you wrote , but it does not work, every time screen goes off , phone goes in airplane mode
zoky4 said:
I tried as you wrote , but it does not work, every time screen goes off , phone goes in airplane mode
Click to expand...
Click to collapse
Do you have the latest radio installed? If you go into settings>about phone, what is your baseband version? Should have 7.15 in there somewhere. If it says 7.09 or something else, you need to update to the latest radio, search froyo radio update in the dev section. It was posted by chiefz_reloaded.
Sent from my T-Mobile myTouch 3G Slide
i have baseband version: 47.63.35.21U_7.15.35.16 and kernel version: 2.6.29.6-cyanogenmod
Q
zoky4 said:
i have baseband version: 47.63.35.21U_7.15.35.16 and kernel version: 2.6.29.6-cyanogenmod
Click to expand...
Click to collapse
Someone correct me if I'm wrong, but doesn't cm7 have a .32 kernel? .29 doesn't work anymore with wifi calling and such. If you have miguels smartass kernel, try flashing that, that's a .32 kernel. But I'm pretty sure cyanogenmod's kernel is .32 now...
Have you flashed a different kernel over cm7? Or did you just flash cm7 w/ gapps?
Sent from my T-Mobile myTouch 3G Slide
I tried to use different ROMs and Radios and no one can help me. When I turn on wi-fi it shows me "Error" all the time. What can I do to fix it? Some sayd me to open my phone, find wi-fi module and check a cable, but I don't have any chance to do it. What can you advise me? Thank
I had the same problem with HoneySense RC1, but I reflashed the ROM then UNITY V4 w/o booting between and has been working good...that's what I did with Honeysense but without knowing what ROM you're using it's hard to say what the problem is!!!!
I have Shokouhi Saga G2 ROM. But I installed a lot of different ROMs and no one helped me. Maybe today or tommorow I will install UNITY v4 and then write there what will happen. thank
installed UNITY v4 and nothing changed. Maybe i've done something wrong? Can You say me, how i should use this? I loaded ROM manager, booted into Recovery and flashed UNITY. What else? Thank
SuperWipeG2
You may wanna try SuperWipeG2:
http://forum.xda-developers.com/showthread.php?t=1044992
You will need to do a fresh install of a ROM but this has worked for me in the past also... Just flash the .zip like a ROM, then flash your ROM and then UNITY4 (only if you're using a Sense ROM)!!! Try that on for size, if that doesn't work you need someone more talented than I am!!!
BTTRDYZ said:
You may wanna try SuperWipeG2:
http://forum.xda-developers.com/showthread.php?t=1044992
You will need to do a fresh install of a ROM but this has worked for me in the past also... Just flash the .zip like a ROM, then flash your ROM and then UNITY4 (only if you're using a Sense ROM)!!! Try that on for size, if that doesn't work you need someone more talented than I am!!!
Click to expand...
Click to collapse
Done all this what you said me and nothing changed I turned on a wi-fi and it started and tried to find network, but after 5 seconds it shows me "can not start a scan for a network"
Maybe when I dropped my phone on the ground and that damaged a wi-fi module...
i just received the newer evo with hardware 4 and gingerbread installed on it, i rooted the phone using the new root method and installed mikfroyo 4.62, the wifi is not connecting right or wont connect, ive tried at home, school, and a friends house, is there something i can change like wimax, NV, Pri, radios...just throwing stuff out there, but you know what i mean, anything like that, that i can change so wifi will work again??
Have you tried reflashing the rom? Did you install on a clean install?
Did you flash a custom kernel? Sometimes an incompatible kernel will mess with your wifi.
Sent from my PC36100 using Tapatalk
I have a similar issue that just occurred, I've had it working all until last week now any ROM I flash/restore will connect to wifi then immediately disconnect.
Any other thoughts?
same here then I wiped everything two times and flashed synergy RLS1 + godmode 3.0 rom and now its back. So maybe try that and let me know if it works for you or if it just worked for me.
sorry i thought i hit submit message like a weeks back lol, yeah i got it to work, i flashed a different rom and kernal then went back to the rom i like and it worked, weird, something must have not flashed write
First Android phone, so I still getting up to speed so hoping someone could answer a couple quick questions. I'll start with the questions and then give the history.
1) How do you determine what ROM you have installed?
2) Any ideas why 4G won't connect? Is there any way to troubleshoot this?
3) Is there anyway to tether on 4G?
So I dove right in after purchasing this phone and flashed a ROM (Zedomax) so I could tether. After installing this ROM my battery life went down the drain and it wouldn't hold a charge for more than 6 hours.
So then I flashed the EG30 stock kernel and my battery life returned to normal. Still wanting to tether I tried another ROM (don't remember which one). This ROM had the same battery issues so I once again flashed the stock kernel back to my phone.
So now my battery life is great, but 4g won't connect (i'm in NYC) for a few days now. I've tried pulling battery, want what not to no success.
I believe I am running the stock kernel, but to my surprise I still have root access. No triangle on the home screen and ODIN says I'm using the Samsung Official binary.
Just to clarify, you are flashing kernels, not ROMs. Zedomax is a kernel, EG30 is a kernel, etc. You can find your current kernel version under Settings > About phone > Kernel version.
Also as an FYI, I wouldn't be going all willy nilly flashing kernels that you can't remember the name of. I'd have to imagine that's a good way to possibly brick your phone or have problems like you are with 4G.
I'm no expert on this stuff by any means but I'd probably recommend flashing Bubby's stock kernel or chris41g's version of it that is packaged up with CWM. These will get you back to the stock kernel (assuming you're not there already) and probably get your 4G working. Otherwise you probably need to update your PRL or something along those lines. Someone who actually knows more about this stuff (i.e. not me) may have a better suggestion for you.
Thanks.
Kernel version is 2.6.35.7-SPH-D710.EG30-CL435734
Is that stock?
walkingcrow said:
Thanks.
Kernel version is 2.6.35.7-SPH-D710.EG30-CL435734
Is that stock?
Click to expand...
Click to collapse
Yep! 10 char
Cool.
So flashing to chris41g's or Bubby's kernels probably won't help me. I'll go searching to figure out how to update my PRL but if anyone has any other ideas I'd be grateful.
Also does anyone know if it is possible to tether over 4G? I was never able to connect unless I turned off 4g before tethering.
It is working again. I started over and flashed Stock-EG30.tar and all is good now.
Out of curiosity did you update your system profile after you flashed? I think it's recommended to do that every time you flash a new kernel.
Settings > About phone > System updates then choose update profile.
Edit - Ahh cool looks like you got it worked out. Cheers!
Nope, I never updated my system profile. That could of been a fix....
Interestingly enough, I was retracing my steps after going stock, after each step I checked 4G connectivity. I lost 4G after enabling AdAway. So I disabled (each change requires a reboot) and got 4G back after the boot. I enabled it again hoping to be able to isolate the issue but after that next reboot I got 4G access with AdAway enabled.
Can't say it is AdAway, but after toggling it, I got 4G back.
OK, so I have AOKP nightly build (Aug, 13th version) and whenever I use toggles to turn on camera flash while on lockscreen and try to turn it off again, it doesn't turn off and doesn't let me connect to the camera... I used Trinity kernel if that'll help, but no luck. Does anyone have this issue? If so, found any solutions?
I tried to fix permission, reflash ROM and wipe the data and do a clean install.. I don't wanna use other ROMs since I am loving this ROM... Got any ideas?
love the Rom, use it with what it comes with.
Don't change kernels on demo rom's
atifsh said:
love the Rom, use it with what it comes with.
Don't change kernels on demo rom's
Click to expand...
Click to collapse
Yup, went back to original kernel that comes with AOKP. But the problem persists. I think it's just a bug... So I have flash off the toggles.. I have widget for it anyways