i just received the newer evo with hardware 4 and gingerbread installed on it, i rooted the phone using the new root method and installed mikfroyo 4.62, the wifi is not connecting right or wont connect, ive tried at home, school, and a friends house, is there something i can change like wimax, NV, Pri, radios...just throwing stuff out there, but you know what i mean, anything like that, that i can change so wifi will work again??
Have you tried reflashing the rom? Did you install on a clean install?
Did you flash a custom kernel? Sometimes an incompatible kernel will mess with your wifi.
Sent from my PC36100 using Tapatalk
I have a similar issue that just occurred, I've had it working all until last week now any ROM I flash/restore will connect to wifi then immediately disconnect.
Any other thoughts?
same here then I wiped everything two times and flashed synergy RLS1 + godmode 3.0 rom and now its back. So maybe try that and let me know if it works for you or if it just worked for me.
sorry i thought i hit submit message like a weeks back lol, yeah i got it to work, i flashed a different rom and kernal then went back to the rom i like and it worked, weird, something must have not flashed write
Related
Okay, I was using BakedSnack and everything worked fine. Switched to Fresh and everything worked fine. I did SOMETHING, though. No idea what. But my wifi isn't working correctly. I can connect to different networks, but there's no internet connection. I can connect fine though 3G/2G. But anytime I use wifi...no internet.
I flashed back to BakedSnack from a nandroid backup and wifi worked. Tried flashing CM6 on top of that and...boom...no more wifi.
Does anyone have any ideas?
and you have done a complete wipe? not just cache?
start with the stock 2.2 odex or deodex rom....
are you using clockwork or amon ra recovery?
if you are restoring everything with titanium bqck up after you flash then stop it....
Sent from my PC36100 using XDA App
+1 on the titanium issue. Titanium can create a lot of trouble if used for more than just apps, and some system things, if done very selectively. When 2.2 first dropped, people were flashing to 2.2, then restoring all kinds of stuff from Android 2.1, creating much havoc.
Sent from my PC36100 using XDA App
Yeah, I'm wiping cache, data, and davlick cache every time. As soon as I boot into CM6 from a working version of bakedsnack, I try connecting via wifi with no luck. I updated the radios last night on both (I have no idea if that would have helped or not. just a desperation move). Wifi worked no matter what on bakedsnack, before and after. On CM6 it didn't matter what I did.
I'm using clockwork recovery. I haven't touched titanium (I could never really utilize it when I was switching between a Sense ROM and a non-Sense. Never knew what I should omit from my restore process).
Switched to Amon recovery to see if that made a difference. No luck yet. (bump)
Flash a stock rooted rom and test your luck. If it still doesn't work after wiping + cache + dalvik then there is something wrong with your phone.
I'm trying to flash a stock ROM now, but I keep getting an error:
"write_raw_image PACKAGE...." installation aborted. something like that.
Limited research appears to indicate that the stock ROM is too big for my boot partition or somesuch.
I can install CM6 all day long. I can nandroid restore anything.
I don't know if this is relevant or not...trying to research. but my hboot version is 0.76.2000. I'm running all the latest radios/wimax.
You might try looking at your firmware settings in both a rom that wifi works and one where it doesn't.
http://forum.xda-developers.com/showthread.php?t=733773
http://forum.xda-developers.com/showthread.php?t=726877
Don't know how you could have inadvertently changed these but, who knows.
Try this in a terminal emulator
/ $ getprop persist.wimax.fw.version
That value should not change between ROMs.
Alogcat from market will display the status messages generated while you try to get on wifi. Start Alogcat then tap home tap wifi, tap home resume Alogcat select logs... look for red.
Sent from my PC36100 using XDA App
Thanks for the tips, willy. I'll try these out later today after work or if things slow down.
I did have some progress, though. I was able to get wifi to work on the Fresh ROM. I had installed a "wiredtetherfix" from the Wired Tether for Evo is working/patched thread. That fixed my wired tether, but evidently broke the wifi. So applying his "wiredtetherrestore" fix got my wifi working again. Unfortunately, a fresh install of CM6 from that piont (with full wipes beforehand) didn't cure wifi for that ROM. That's the one I want most, CM6, so I can go back to a faster ROM that had all the tethering apps as native applications.
On FreshROM the wimax fw version is: 4.6.2.2v26023_
Will update later with CM6 wimax version.
Okay, I flashed CM6 again and tried to pull the wimax fw version. There is no wimax on CM6, though. I think that's the problem, anyway. When I run the command, nothing happens. When I run wimax_mtd, it says "not found."
CM6
wifi MAC: 38:E78:17:CB:**
android version: 2.2.1
Baseband: 2.15.00.09.01
Kernel version: 2.6.34.5-cyanogenmod
Build number: FRG83
bump. Anyone have any ideas?
HW version 0003
Myns release 4
3.30.651.3
HTC Kernel 17
Washington DC area
for some odd reason i have no data. no 3g, 4g, only wifi. updated profile and prl. Did the ##data# reset in edit mode with the PRL. Shut off and let sit without battry for a while.
Any ideas?
changed kernel to netarchy 4.1.9.1 cfs and put the new radio and wimax radio on...same thing
munsterrr said:
changed kernel to netarchy 4.1.9.1 cfs and put the new radio and wimax radio on...same thing
Click to expand...
Click to collapse
flash a stock rom.
munsterrr said:
changed kernel to netarchy 4.1.9.1 cfs and put the new radio and wimax radio on...same thing
Click to expand...
Click to collapse
Don't resort to flashing radios you can really screw up your 4g.....Did you try factory reseting your phone but back everything up first and see if that works if not try flashing a stock rom or a ruu.
Update Profile/PRL. If that doesn't work, flash a stock RUU and Update Profile/PRL. If that doesn't work do a ##786# reset. That should get you up and running.
If you still have problems post back and I will point you in the right direction to fixing your data profiles.
I also have the same problem using myn rls4, but have net 4.2.1 cfs HAVS more kernal. Out of nowhere the data will just cut out and stop working. I will try some of the suggestions in the thread.
Did any of out suggestions work for you?
h2o-pr00f said:
I also have the same problem using myn rls4, but have net 4.2.1 cfs HAVS more kernal. Out of nowhere the data will just cut out and stop working. I will try some of the suggestions in the thread.
Click to expand...
Click to collapse
well i went back to CM 6.1(newest build) and about 45 minutes ago it happened again while i was at the bar. guess imma go to a non rooted RUU to see what happens
not to be "that" guy but one bump for a hopefully permanent fix.
As much as half of us have a rom flashing addiction. I cannot do this every day lol.
munsterrr said:
well i went back to CM 6.1(newest build) and about 45 minutes ago it happened again while i was at the bar. guess imma go to a non rooted RUU to see what happens
Click to expand...
Click to collapse
If that doesn't work. Call sprint and tell them your phone is having really slow data and it's going in and out tell them it happened after updating your phone through system update then they will say it's due to software update and they will send you a replacement next day.That is my suggestion because you don't want to screw something up that might be noticeable trying to fix your current evo just get a new one and start over with everything updated. I hope I was helpful
I did this, using the debug menu once. I reset all data and then it wouldn't update my profile so I couldn't access my 3G and the web data was gone. I tried to update my profile/prl and it wouldn't, kept timing out.
Every time I would reboot the handset it would try to update automatically but fail. It turns out the rooted rom I was on, (Fresh EVO) was interfering with the update. I flashed the stock RUU...then the phone attempted the same update profile, and afterwards it was back to normal.
So try going back to a stock rom, and then if it doesn't automatically try to update your profile, go to your settings and do so manually, should do the trick.
Basically do what APH noted in his post...sorry must have skipped your posting.
This same thing happened to me on the Hero. I RUU'd back to Sprint's crap and then called them. They walked me through some things and then told me to take it in. The repair guy did the same thing I did (RUU and then data fix) and it started working. So, if all else fails, RUU and bring it back to the store.
thank goodness i have a long weekend. Guess if the new PRL update doesnt fix this then ill head over.
I flashed the ROM a few nights ago and followed the instructions regarding flashing the new Radio pack but after noticing that 4G just wouldn't turn on I tried going back into recovery and flashing the .zip again. Still didn't work.
Eventually I restored the previous backup because of an unrelated data-loss incident. I restored the backup I made of Warm and tried re-flashing the radio .zip but it still wont work, anyone care to point out what I'm doing wrong?
I've tried searching the ROM's thread but "4g" must not be long enough to search for, and "radio" yielded no help either. I would've posted this there but evidently I need 10 posts before I can post to the Dev forum(A new rule?).
Thanks for reading!
What's your phone information(build,kernel,hboot)?
I thought that stuff was controlled by the ROM developer. It's on HTC kernel 15, build is warm 2.2 RLS 5.
Sent from my PC36100 using XDA App
As it turns out, last night I was able to turn 4g on, but I'm no longer able to do it now. Anyone know what's up?
Sent from my PC36100 using XDA App
I had the exact same problem as you. This just happened out of nowhere which is even more weird. The rom was working fine and then all of a sudden it just stopped allowing me to turn on 4g. I get the scanning then disconnect really quick. Or I get turning on and turning off over and over again. It shows really quick.
What I did was I flashed back to stock with an old nandroid. I went to a area without 4g and tried to let it connect. Of course it couldn't. I then updated my profile 4 times. I flashed back to another rom and it is working again. Still a little buggy but way better than not being able to connect at all.
Jjday7 said:
What I did was I flashed back to stock with an old nandroid. I went to a area without 4g and tried to let it connect. Of course it couldn't. I then updated my profile 4 times. I flashed back to another rom and it is working again. Still a little buggy but way better than not being able to connect at all.
Click to expand...
Click to collapse
Did you go back to Warm? And what profiles are you talking about exactly, and what does that do? I like this fRom a lot so I'd hate to have to switch.
Sent from my PC36100 using XDA App
motherboyxxx said:
Did you go back to Warm? And what profiles are you talking about exactly, and what does that do? I like this fRom a lot so I'd hate to have to switch.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I have been bouncing back and forth between his and mikfroyo. You go into settings and go to system updates and update profile. When it's done hit ok. Do that a few times and restart the phone. See if that works. It took me days to get mine working again. I think it was from flashing from rom to rom all the time and updating and upgrading the radio's that caused the problem. I don't think it's his rom that is causing it in my case at least. Good luck
My standard process when flashing roms and kernels has always been and will be when im done with the flashing . Setup widgets and where I want them , apps , general settings etc etc etc . Then perform Update Profile followed by Update PRL . When those processes are done I usually let the phone settle down some then do a reboot . Again let the phone settle down from the reboot . Then check your 4G connection it should work . My only advice is to stick with roms running off the newest radios . That way you cut out flashing radios causing possible issues with 4G .
So i am having issues with this ROM and was wondering if anyone is having the same issue. Well i see that my awake and run time are the same and spare parts is showing 100% usage on the CPU.
ive tried using all the different kernels to no success.
any help would be appreciated.
Myn's warm 2.2 RLS 5
updated radios
kings 11
I've installed Myn and my 4G doesn't work. It switches between on and off really fast and then sometimes it'll go further and scan, connect, disconnect, and repeat.
Specs: myn's warm TwoPointTwo (RLS5)
Baseband: 2.15.00.11.19
Kernel: 2.6.32.25-netrarchy-toastmod-4.2.1-cfs-bfq-havs-more-smartass
PRI version: 1.90_003
PRL version 60674
NOTE!! I've already checked if my RSA keys have been lost and they haven't.
Any tips would be grateful, I'm going to flash Fresh tonight and hopefully it works.
Jj, and SouthernEvo, thanks for the tips! I cracked the glass on my phone and just got a replacement, when I flashed the radios I didn't get the images the dev said I would: "While the radios are flashing you'll see a little green arrow phone icon for a bit afterwords, Wait on this. You will then automatically be taken back to recovery."
If this time around it doesn't work again I guess I'll try flashing a re-downloaded Radio package!
running_onCode, seems that we might be having the same issues, did you notice anything strange while flashing the radio package? Like I said on this second Evo, when I flashed it I paid attention and didn't get any green exclamation points.
I have this problem as well. I've used the app that checks for the RSA keys and it says I'm good. I've also checked via a console app.
What happens is exactly like everyone else here. Once the WiMax radio is turned on it'll scan for 3-5 seconds, then it says connecting to Sprint for about .5 seconds, then it says disconnect, and repeats. I've flashed and reflashed with the latest radio pack at the top here: http://forum.xda-developers.com/showthread.php?t=715485 . I did that so I could run Myn's Wyrm RLS5. H boot has not been flahed ( think I have a really old version). I've tried different ROMs and there is no difference. I tried going back to my previous ROM and it still didn't work. I tried updating Profile and PRL 5x and doing a shutdown>reboot and there was no change. Any help would be great.
I tried
Standby time: 10
Scan Rate: 30
NAI: [YourMAC]@sprintpcs.com
User Name: your sprintpcs.com account
Realm: sprintpcs.com
Center Frequency: 2647000, 2657000, 2667000
Bandwidth: 10, 10, 10
NAPDIS: 000002
NSPDIS: 000004
Wimax_Scan_Attempt_Timeouts: 1
Wimax_Scan_Retrys: 15
Wimax_Idle_Sleeps: 10
Wimax_Entry_RX(RSSI): -98
Wimax_Entry_CINR: 4
Wimax_Entry_Delays: 0
Wimax_Exit_CINR: 1
Wimax_Exit_Delays: 15
Handoff Threshold: 0
Idle Mode Timer: 0
TLS: Enable
TTLS: Disable
and theres no change
motherboyxxx said:
Jj, and SouthernEvo, thanks for the tips! I cracked the glass on my phone and just got a replacement, when I flashed the radios I didn't get the images the dev said I would: "While the radios are flashing you'll see a little green arrow phone icon for a bit afterwords, Wait on this. You will then automatically be taken back to recovery."
If this time around it doesn't work again I guess I'll try flashing a re-downloaded Radio package!
running_onCode, seems that we might be having the same issues, did you notice anything strange while flashing the radio package? Like I said on this second Evo, when I flashed it I paid attention and didn't get any green exclamation points.
Click to expand...
Click to collapse
Yeah, it seems like we do have the same issue. I'll flash Myn's rom when there is a fix for the 4G or maybe it's just our phones? I got tired of waiting so I flashed MikFroyo and everything is working. I was using 4G a couple minutes after leaving my house yesterday.
Yeah I'm thinking of just flashing another ROM, can't get much help without posting to the ROM thread itself and I guess I can't do that anymore!
It's too bad though, the first time around I had amazing battery life, but this time it's a lot worse
Are you using Titanium Backup? I had the same problem when I used TB, I would wipe everything, flash Myn's rom and them restore all my apps using TB and 4g would not turn on at all, RSA keys were intact but no 4g. I actually did a Nand backup before running TB and after using TB and trying to restore Nand 4g still would not work!
It actually took a while before I figured out it was TB borking the 4g (3-4 installs and reboots). I had to write down all my backed up apps and download them one by one
Hope this helps!
Jfree3000 said:
Are you using Titanium Backup? I had the same problem when I used TB, I would wipe everything, flash Myn's rom and them restore all my apps using TB and 4g would not turn on at all, RSA keys were intact but no 4g. I actually did a Nand backup before running TB and after using TB and trying to restore Nand 4g still would not work!
It actually took a while before I figured out it was TB borking the 4g (3-4 installs and reboots). I had to write down all my backed up apps and download them one by one
Hope this helps!
Click to expand...
Click to collapse
Can anyone confirm this? I'd love to go back to Myn's Rom.
Sent from my Supersonic MikFroyo using Tapatalk.
Jfree3000 said:
Are you using Titanium Backup? I had the same problem when I used TB, I would wipe everything, flash Myn's rom and them restore all my apps using TB and 4g would not turn on at all, RSA keys were intact but no 4g. I actually did a Nand backup before running TB and after using TB and trying to restore Nand 4g still would not work!
It actually took a while before I figured out it was TB borking the 4g (3-4 installs and reboots). I had to write down all my backed up apps and download them one by one
Hope this helps!
Click to expand...
Click to collapse
As a matter of fact I am using Titanium! So I should flash the rom and install the apps one by one or what? That's not really something I'm looking forward to
motherboyxxx said:
As a matter of fact I am using Titanium! So I should flash the rom and install the apps one by one or what? That's not really something I'm looking forward to
Click to expand...
Click to collapse
I doubt it is titanium, I had the same problems with RLS 5 not getting 4g. Have used titanium on Calks, Mik, and Azrael without having 4g scanning / disconnecting issues. There was a fix for this a couple weeks ago, somewhere. Too much for me so I moved on. Ricsim said that battery life is 97% driven by the kernel, not the Rom.
Bump! Anyone?
Done lots of searching, so if I have missed something, feel free to point me to the thread I've been looking for, thank you!
With Amon RA: I have just flashed Synergy RLS1 with Warm Sprinkles, and decided that's the rom I am gonna stick with for awhile. I have also flashed Lithid's .8 More-Freedom kernel (the universal one, is this the correct one?) and the phone has booted up successfully. Ok sweet.
So now: my 4g is broken, and my sense launcher keeps force closing every time I unlock the phone. Everything else works great! I've tried flashing a few different radios, cleared/wiped all cache and data multiple times. Reflashed Synergy twice now. What am I missing? Most people seem to get great results from the synergy/freedom combo.
You can try to fix permissions with ROM manager or from ra under other/fix mismatch uid or what ever its called.
Sent from my PC36100 using XDA App
I am using Golden Monkey1.0 with SynergyRC2 at the moment. Everything is as smooth as butter.
i will try both of those, thank you!
Okay, the Wimax radio powers on now and scans. Says: Connecting to Spring... > Authenticating with Sprint > disconnected > Scanning...
So I figured my phone just wasn't provisioned because of all the rom flashing I have been doing, right? called sprint and everything shows up fine on their network. They want me to take it to the store to fix the issue. Hell. No.
OK here's the deal. I rooted my wife's Inc 2. Put on miui the newest version. Then I put on tiamat 1.1.5 kernel. When u turn on wifi, make a call or restart the phone bye battery pull or power button it will lose 3g. It is impossible to get it back. I have tried everything that I can think of. Airplane mode, wifi on and then off, restarting phone check all options that could affect it. I have tried with the miui kernel and no luck. Also I have the same setup on my phone and I have no issues. If anyone has any ideas on why this is happening I would love to hear them.
You should try updating the kernel, that will most likely solve your problem.
Do u mean just a different kernel?
fbmustang69 said:
Do u mean just a different kernel?
Click to expand...
Click to collapse
Tiamat works great with miui. My first flash borked the wifi too, and a simple reflash of the same kernel fixed it. The kernel included with miui is from cyanogenmod, i believe, and it works fine too.
Do you use a script to wipe the old kernel before installing the new one?
I use the ultimate kernel cleaning script v2 and have had no issues with tiamat.
Thanks for the ideas I will try them out.
Can you give us a feed back I am desperate ,
I downloaded miui from rom manager and miui.us. If I used miui rom from miui.us 3g did not work. If i used the one from rom manager it did work. I know it weird but i was using the one from rom manager on my phone and the 3g was working. Since i didnt put rom manager on her phone i used miui.us. so when I put rom manager on her phone and used that it worked. I dont know why this happened just glad she gets 3g again.
With MUIU right ? i will try it soon , thanks for the idea
It's weird but if i get get back my 3G with it i will use it
If you can run other rom as virtuous an confirm that this method work ,it will be grateful and more hopeful , now too many guys include me are in this situation.
Thanks in advance now five days without 3G, is terrible
up
Any idea here ?
i used rom manager to download miui and the 3g worked. when i used the download from miui.us it 3g did not work. Im also not using miui kernel if that matters. i have used tiamat 1.1.5. i'm Using aeroevan_inc2-0.4 kernel now.