[Q] Flashing radio whitout Radio s-off :( - Desire HD Q&A, Help & Troubleshooting

Is it something that can be done whit my friend phone now?

AA--92 said:
Is it something that can be done whit my friend phone now?
Click to expand...
Click to collapse
everytime you want answers you must give as much as possible details
like
does the phone still booting(can you Open the phone)
can you acces Hboot/bootloader (with the phone closed press Power button and Volume Down at the same time) and what Exactly did you did (beside the Obvious Question ...What Was your Friend THINKING ...flashig radio without having Radio S-off)
ofc , if you c an acces HBOOT
the steps will be
1. Downgrade to 1.32..and get Permanent ROOT
2. RADIO S-offf
3 . Eng s-OFF
flash radio again.....THE WRIGHT WAY
Hit tnx, and Have fun....and arm yourself with patience

Saluco said:
everytime you want answers you must give as much as possible details
like
does the phone still booting(can you Open the phone)
can you acces Hboot/bootloader (with the phone closed press Power button and Volume Down at the same time) and what Exactly did you did (beside the Obvious Question ...What Was your Friend THINKING ...flashig radio without having Radio S-off)
ofc , if you c an acces HBOOT
the steps will be
1. Downgrade to 1.32..and get Permanent ROOT
2. RADIO S-offf
3 . Eng s-OFF
flash radio again.....THE WRIGHT WAY
Hit tnx, and Have fun....and arm yourself with patience
Click to expand...
Click to collapse
I can acces h-boot. Thx for helping me

Related

Can someone explain this?

I've got the HTC P3300 for a few months now. I wanted to upgrade to WM6, which I did. Everything is fine.
Now I want to downgrade to WM5 WWE, but it doesn't work.
My pda is not sim-locked, but it still fails. There are a lot of threads regarding this, so I wont ask this, but ..... What the h*ll is CID lock?
I have read a lot about this, but I don't understand. Where is it good for, why can I upgrade, but not downgrade?
Please, can someone explain this in a simple yet effective manner to me?
Hope to read soon,
With regards,
Ronald.
And bootloader?
oh, yes,
What is the bootloader mode? How do I get there, and what does it do?
If you want to know specific what CID is and why to run USPL, you should ask the master-mind behindt the prog. him selv (Clik on "USPL" further down.
If you have the correkt original ROM made for you unit it should not be a problem to run it without using USPL. But personally i use this genius lille flash (just in case) - Why take any chance
Follow thise instruction and it should go great
Hard reset your device
Run USPL - klik here for further explanation
Run upgrade / Downgrade
rljb1804 said:
oh, yes,
What is the bootloader mode? How do I get there, and what does it do?
Click to expand...
Click to collapse
Here you can see hov to access bootloader..
I have downgraded my orbit easily after running USPL utility. This utlity is to temporary unlock the phone. Please try to downgrade or upgrade after this tool run to unlock CID
(The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears)
MicTh said:
Here you can see hov to access bootloader..
Click to expand...
Click to collapse
just to point this out because a friend of mine misunderstood this: this wiki article shows both how to do a hard reset and also how to enter bootloader. you dont have to do a hard reset first to enter bootloader. just do what abshie wrote (even though i dont think pressing the power button is necessary).
You are right
soardiac said:
just to point this out because a friend of mine misunderstood this: this wiki article shows both how to do a hard reset and also how to enter bootloader. you dont have to do a hard reset first to enter bootloader. just do what abshie wrote (even though i dont think pressing the power button is necessary).
Click to expand...
Click to collapse
I just mentioned the way to enter boot loader is because he asked for it.
No need to do anything in the bracket to upgrade or downgrade OS.
Just run USPL and you can easily do it.
ronald
rljb1804 said:
oh, yes,
What is the bootloader mode? How do I get there, and what does it do?
Click to expand...
Click to collapse
you use the bootloader mode for... well, for upgrading and downgrading your ROM, for one thing!!!
you can always downgrade, but remember, first you must run the USPL each time you want to change your rom. then you won't have a problem. you don't even need to downgrade to your original rom, unless you bricked your device. but if you didn't brick it and you just want to change/downgrade your rom, just run USPL first then flash your device with your choice rom!

[Q] Help needed

Hi all
I had just try root my desire to get froyo installed.
First I run downgrade23 folder with included files, to get Hboot from 0.93 to 0.80
After that my phone crash, its hang with HTC logo.
Some one help me to get my phone back to life...
I am a noob on this so please explain carefully so I understand...
HELP please......
tefortwo said:
Hi all
I had just try root my desire to get froyo installed.
First I run downgrade23 folder with included files, to get Hboot from 0.93 to 0.80
After that my phone crash, its hang with HTC logo.
Some one help me to get my phone back to life...
I am a noob on this so please explain carefully so I understand...
HELP please......
Click to expand...
Click to collapse
someone realls should update the tutorial. There is no need to downgrad to older hboot with the newest unrevoked.
EDIT: Is your phone branded? Did you write down you exact version number before you flashed anything?
Have you tried to run the new unrevoked in the state its in now?
Branded?version number?
What you mean....
I try to run the new unrevoked3 but program just say "waiting for device"
I check in device manager and can see that Android bootloader iinterface appear.
But nothing happend....
What to to??HELP ME
I need to get my phone back to life...
There must be away to fixx it??
was you phone network branded? as in did a network logo appear when you turned your phone on
tefortwo said:
I try to run the new unrevoked3 but program just say "waiting for device"
I check in device manager and can see that Android bootloader iinterface appear.
But nothing happend....
What to to??HELP ME
I need to get my phone back to life...
There must be away to fixx it??
Click to expand...
Click to collapse
Did you enable USB Debugging? Settings > Applications > Development > USB Debugging.
There probably is a way to recover your phone, but it isn't helping that you didnt write down you version numbers and/or read in the forum before you started the root process.
Is your phone branded?: Is it a provider-phone i.e. t-mobile, vodafone etc? To give a definite answer on that you need to know the exact version number (like 2.29.405.5). Without this number you can afaik just guess - did you see a logo other than htc's on bootup? Where there any provider-specific apps preinstalled on your phone? Where did you buy it?
My first guess is to boot into fastboot (power on while holding "back"-key) and flash the correct ruu ( Download here)
If its unbranded, the correct RUU is RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe.
After that your phone is completely back to stock and you can retry the rooting-prodedure but with the newest unrevoked and without downgrading hboot
EDIT: Am I correct in thinking that you can't boot up your phone and a stuck on the first htc-logo (before the annoying sound)? If no, forget all the above.
Can you boot into recovery? (power on while hitting vol-, then wait 10 seconds, then highlight "recovery" with vol-/vol+, select with power, wait another 5 seconds, hit vol+ + power (I think ^^)
Hi
I check before I do the downgrade procedure that its hads this number:2.29.405.5
And I try to get unrevoked now and no communication.
I also had USB debugging on before it crash.
Now its just freeze on HTC logo and after that a red triangle with a phone symbol.
tefortwo said:
Hi
I check before I do the downgrade procedure that its hads this number:2.29.405.5
Click to expand...
Click to collapse
That means your phone is not branded ('405' is the important part).
The get unrevoked working you need your phone to be booted up. So you probably need to run the ruu first.
How can I start ruu?
What is the step to install that RUU?
Do I need to install something on the SDcard?
Do I need a PC to do this?
tefortwo said:
How can I start ruu?
What is the step to install that RUU?
Do I need to install something on the SDcard?
Do I need a PC to do this?
Click to expand...
Click to collapse
As I said, you download the RUU[...].exe I posted earlier. Then you boot your phone into fastboot (power+back-Key ) and run the downloaded ruu.exe on your PC. Piece of cake.
But wait for someone else to confirm.
I try to start the RUU but got an Error....on the PC
What to do?
I run Windows7 on PC.
Why can`t I run the RUU file??any clue....
Are you using 32 or 64 Bit? Sometimes 64 bit cause problems. What did the error say?
Just right click and and run as administrator.. run your RUU that way
Well, I use 32bit Enterprise version and right click as administrator, still fail to open....
Help......
This is the error message below:
SetupNew\setup.cpp(140)
PAPP
PVENDOR:
PGUID
$
@Wndows Vista Service Pack 1(7601)
IE Version 9.0.8112.16421
What RUU is for me????
I have Telia simcard...Its seems that your info dont help me....
There must be some expert out there....can someone help me please...
I run this
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release_159811_signed.exe.
Its start but get an error "170" USB connection...well
I am confused now....seems that I cant connect to phone..
Help me....please
Is the phone dead now????do I need to send it back to vendor for repair???

[Q] Extra slow booting&hboot operation after downgrading 2.50.405.2

Hello! Got DHD 2.50.405.2, downgraded it with fr3evo and misc_version to 1.32, and after this something happend with ?hboot? - powering up takes about 30 minutes - 20 minutes just black screen(so I thought phone completely broken), then HTC logo with approx 10 mins vibro, approx 5 mins silent, boot to android and then - working fast as usual. USB connection not recognizes, reboot to bootloader takes eternity and locks up in menu(maybe its just makes a move onse an hour, I dont tested so long)
Any advises?
... and you've flashed a new radio, flashed a 3rd party recovery, and a new rom as well?
.... or are you still running 1.32 since you didnt really understand why you were downgrading in the first place?
JSLEnterprises said:
... and you've flashed a new radio, flashed a 3rd party recovery, and a new rom as well?
.... or are you still running 1.32 since you didnt really understand why you were downgrading in the first place?
Click to expand...
Click to collapse
I am running unrooted 1.32 because bootloader freezes and usb connection not recognizes, just charging. This thing begins on the first reboot after 1.32 flashing, so I was unable to root, s-off etc. I have a plan to try root\s-off and manualy write hboot\radio in partitions area from terminal emulator, but want to gather some info before doing this, maybe there is another way? And what is so special in 2.50 stock rom phones so they acting so strange way on downgrade? Differs in hardware, deep fw versions or it was just corrupted 1.32 flashing?
Hello.
First sorry for my bad english.
I have exact the same problem after I tryed this new tool : Advanced Ace Hack Kit
But my phone is root and s-off
I can not boot to recovery. Not with buttons and not with my rom manager.
How can I flash new image?
Please can anyone help us.
Thanks a lot
Picture is not from my phone but almost like that
Now I can boot to Recover with 4ext Recovery Control.
I can flash any rom but it need 15 minutes to boot up
Need help to fix it.
slow boot
me too...downgraded...now taking lots of time to boot...what did u do to correct...am going to flash a gb rom to c how it goes...
Did anyone find a fix for this issue? I'm currently having the same problem!
Help!!! Does anyone know a solution to this??
Slow boot as in the bootloader part(white HTC)?is is followed by long vibrate?
markmmxtech said:
Slow boot as in the bootloader part(white HTC)?is is followed by long vibrate?
Click to expand...
Click to collapse
Yeah that's the one, once loaded it's fine so currently just hoping the battery doesn't run down or that I need a restart soon - but can't live like this forever
goldielocks said:
Yeah that's the one, once loaded it's fine so currently just hoping the battery doesn't run down or that I need a restart soon - but can't live like this forever
Click to expand...
Click to collapse
as ive said..after downgrading, update through OTA or install an RUU then root it with Ace advance kit..I was having the same issue before, the one I mentioned above solve that matter
markmmxtech said:
as ive said..after downgrading, update through OTA or install an RUU then root it with Ace advance kit..I was having the same issue before, the one I mentioned above solve that matter
Click to expand...
Click to collapse
It worked!! Now back to booting very quickly
Thanks for your help!!
cheers
It worked!! Verry thanks for your help!!
!!! After downgrading 1.32, i flash 2.50 used Advance Ace Kit. (copy "PD98IMG.zip" ver 2.50 into "aahk-29102011\PD98IMG\" ) It very very long time..... So be patient !!!
how much of time it takes please help ? because I need more info about this ?
Thanks
please help me
goldielocks said:
It worked!! Now back to booting very quickly
Thanks for your help!!
Click to expand...
Click to collapse
Hey ma., will u please help me, i have the same issue, my dhd not going to bootloader anymore, will u please tell me the steps u did in Ace Hack toolkit.
Thanks a lot

[Q] [Help] How to downgrade and root using AAHK without Volume Up button ??

Hello, i wish to downgrade and root my Desire HD, but it has the Volume Up button broken, the Volum Down is ok.
When i run the AAHK procedure at the first restart it check the downgrade Zip file and then ask me to push Volume Up !!! This is the problem, but how i can resolve it ??
I have tried also other way to root the phone but it has 2.3.5 and 3.12 version and i think is only AAHK procedure the right way to root.
Have you suggestions to resolve this problem ??
Is possible to add textual command in the procedure to made the press button Volume Up at the end of the file check ?? (if yes, where and which ?? )
I wait your help, thank you, bye.
Hi there,
I have the same issue and my level of knowledge is 'limited' too
What I figured out is that we can flash signed images. I don't know whether flashing an older signed image may work...
Once downgraded you need to root. There no vol+ is needed... and then we could flash ClockModWork and flash whatever ROM. I don't know if for that last step we need Vol+.
Another route of investigation would be the unlocked bootloader via HTCdev.com... but don't know if that would be of any help.
There's anyway a light at the end of the tunnel... ICS may eventually come to us too as an official upgrade sometime this year... sometime...
Cheers,

[HBOOT][RADIO] [S-OFF] [gsm] HBOOT & Radio collection

Edit: uploading the radio along with hboots. All the HBOOT and Radio is ripped from official RUU for EU. I have tried the latest four radios. But the older two I'm not so sure. Uploading them for experiments anyways. Let me warn you these radio and hboot flashing is far more riskier than flashing rom. Actually this is the way you can brick your phone actually.
Radio_47.23e.35.3038H_7.57.39.10M &HBOOT_0.90.0000 (VERY RISKY)
Radio_47.23e.35.3038M_7.57.39.01M & HBOOT_1.03.0000 (RISKY)
Radio_47.23c.35.3037_7.54.39.28M & HBOOT_1.08.0000 (SAFE)
Radio_47.23a.35 .3035H_7.53.39.03M & HBOOT_1.08.0000 (SAFE)
Radio_47.10g.35.3032H_7.49.36.01M & HBOOT_1.09.0099 (SAFE)
Radio_47.10.35.3029H_7.46.35.08 & HBOOT_1.09.0099 (SAFE)
=======================================================================
Hi everyone, I had a lot of trouble after s-off my phone via XTC clip from a nearby shop. Just because my phone became HBOOT-0.90.0000. It has many disadvantages like U cant flash roms other than GB. So, after bricking my phone twice by flashing latest radio(every time I had to go back to that shop and he got a JTAG to fix the phone) I have found a solution. The first thing you need to do with your S-OFF device i think flash an RUU.
IF YOU WANT TO FLASH ONLY RADIO IT'S VERY RISKY. U NEED TO UPDATE HBOOT ETC. TO FLASH LATEST RADIO VERSIONS. NEW HBOOT IS NORMALLY INCLUDED IN RUU (Rom Update Utility). THIS HBOOT LOOKS COOL AS ITS SIMPLE.
Hboot 1.08.0000 => dowloadlink
My phone is A510e. S-OFF.
ENJOY.
** please rename the files to PG76IMG.zip before use and delete after flashing one at a time.
finance.resat said:
Hi everyone, I had a lot of trouble after s-off my phone via XTC clip from a nearby shop. Just because my phone became HBOOT-0.90.0000. It has many disadvantages like U cant flash roms other than GB. so after bricking my phone twice (every time I had to go back to that shop and he got a JTAG to fix the phone) I have found a solution. The first thing you need to do with your S-OFF device i think flash HBOOT-1.08.0000 from bootloader.
As it has to be ripped from a RUU uploaded by d33ps1x I am uploading a link for newbies like me.
Hboot 1.08.0000 dowloadlink =>PG76IMG.zip
After upgrading U can flash this RUU from this linkhttp://forum.xda-developers.com/showthread.php?t=1577175 and do fota update to upgrade to latest firmware and get back to HBOOT 1.08.0000. After getting back to 1.08.0000 you CAN EASILY FLASH CWM FROM BOOTLOADER AND ROOT AND EVERYTHING ELSE without going through any trouble.
My phone is A510e. S-Off.
ENJOY.
Click to expand...
Click to collapse
If you have S-OFF with XTC clip, you have also S-OFF in the radio which means you can flash whatever radio and hboot you want.
modpunk said:
If you have S-OFF with XTC clip, you have also S-OFF in the radio which means you can flash whatever radio and hboot you want.
Click to expand...
Click to collapse
No sir. U can't flash everything even with S-Off. Some radios are killed by bootloader when flashed as my mentor (who jtag my phone to unbrick) says. And when that happens you won't know before the next power button press as the bootloader screen will say flash successful, but in real your phone is bricked means you will only see a white screen blinking on and off when u press power. When press vol up and power ull get 3 vibration, when press vol up vol down and power you will get 7 vibration. LOL.
Your hboot has to be 1.08.0000 to become like you said (flash everything). And like I said I bricked twice trying to flash different radio versions. And there isn't a single post about this matter not in xda or anywhere else I searched.
My hboot became 0.90.0000 while I S-Off. So this post is for gsm S-Off users who has hboot below 1.08. Thanks to d33ps1x for the ruu post. There is not much post about S-Off.
finance.resat said:
No sir. U can't flash everything even with S-Off. Some radios are killed by bootloader when flashed as my mentor (who jtag my phone to unbrick) says. And when that happens you won't know before the next power button press as it bootloader screen will say flash successful, but in real your phone is bricked means you will only see a white screen blinking on and off when u press power. When press vol up and power ull get 3 vibration, when press vol up vol down and power you will get 7 vibration. LOL.
Your hboot has to be 1.08.0000 to become like you said (flash everything). And like I said I bricked twice trying to flash different radio versions. And there isn't a single post about this matter not in xda or anywhere else I searched.
My hboot became 0.90.0000 while I S-Off. So this post is for gsm S-Off users who has hboot below 1.08. Thanks to d33ps1x for the ruu post. There is not much post about S-Off.
Click to expand...
Click to collapse
Well you "mentor" hasn't a clue then to be honest, I had the triple vibrate blank screen problem, phone was far from bricked, all I had to do was re run the RUU and it worked fine, even at 1.08.0000 radio, the whole idea of s-off is you can do what you want...
Ko_Ka said:
Well you "mentor" hasn't a clue then to be honest, I had the triple vibrate blank screen problem, phone was far from bricked, all I had to do was re run the RUU and it worked fine, even at 1.08.0000 radio, the whole idea of s-off is you can do what you want...
Click to expand...
Click to collapse
Sir u can't run ruu when ur phone is bricked. Because u can't connect ur phone to pc via usb and also u can't go to bootloader when u press power and vol down u ll see nothing happens..
All I'm saying is when your bootloader is below 1.08 and u r S-Off u may be in risk as some radio don't support below 1.08. 1.08 is ok I also said that in post.
The thing I said wrong which u misinterpret is U can flash everything with S-Off true. But u can brick atleast there is a chance as I bricked twice I experienced, don't try flashing all radios if ur bootloader is below 1.08.
It's just a caution derived from my experience. I'm no dev. Just passing time here. Do whatever with ur phone at ur own risk.
Cheers for the help dude. I'm sure it'll save a good amount of people out there in this position xD
Sent from my Wildfire S A510e using xda app-developers app
chaplinb said:
Cheers for the help dude. I'm sure it'll save a good amount of people out there in this position xD
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Thanks. I hope so.
I have HBOOT 1.09.0099 & truly i did porting all the ROM's out there, no one getting problem.
As you said in the PM about CM7 or in this post to UPDATE/DOWNDATE (Don't understand which should be called if anyone go from HBOOT 1.09.0099 to 1.08.0000) the boot loader, i think modpunk is right here & you need to downing the kernel as alquez specified in CM7 post if someone getting problem porting any ROM like cyanogenmod.
Check this link ~
[ROM] Unofficial Cyanogenmod 7.2 (UPDATE) (Full maintenance release)
http://forum.xda-developers.com/showthread.php?t=1226765
[KERNEL][GPL]CM7 Custom BFS Kernel 2.6.35
http://forum.xda-developers.com/showthread.php?t=970543&page=2
finance.resat said:
Hi everyone, I had a lot of trouble after s-off my phone via XTC clip from a nearby shop. Just because my phone became HBOOT-0.90.0000. It has many disadvantages like U cant flash roms other than GB. So, after bricking my phone twice by flashing latest radio(every time I had to go back to that shop and he got a JTAG to fix the phone) I have found a solution. The first thing you need to do with your S-OFF device i think flash HBOOT-1.08.0000 from bootloader if not an RUU.
IF U CAN GET AN RUU IT'S OKAY. BUT IF YOU WANT TO FLASH ONLY RADIO IT'S NOT. YOU NEED THIS HBOOT ONLY IN THAT CASE. U NEED TO UPDATE HBOOT TO FLASH LATEST RADIO VERSIONS. NEW HBOOT IS NORMALLY INCLUDED IN RUU(Rom Update Utility).
Hboot 1.08.0000 => dowloadlink
My phone is A510e. S-OFF.
Hboot 1.09.0099 just in case =>downloadlink.
ENJOY.
** please rename the files to PG76IMG.zip before use and delete after flashing one at a time.
Click to expand...
Click to collapse
dude you have any ENG hBOOT rather than PVT-SHIP..???
Hi
cleansafi said:
I have HBOOT 1.09.0099 & truly i did porting all the ROM's out there, no one getting problem.
As you said in the PM about CM7 or in this post to UPDATE/DOWNDATE (Don't understand which should be called if anyone go from HBOOT 1.09.0099 to 1.08.0000) the boot loader, i think modpunk is right here & you need to downing the kernel as alquez specified in CM7 post if someone getting problem porting any ROM like cyanogenmod.
Check this link ~
[ROM] Unofficial Cyanogenmod 7.2 (UPDATE) (Full maintenance release)
http://forum.xda-developers.com/showthread.php?t=1226765
[KERNEL][GPL]CM7 Custom BFS Kernel 2.6.35
http://forum.xda-developers.com/showthread.php?t=970543&page=2
Click to expand...
Click to collapse
Doesn't matter if you are 1.8 or 1.99 call it update or downgrade. You shouldnt have problems when ur hboot is 1.99.
Anyways U need this post only if your hboot is 0.90, that will be the case when someone is just s-off and hasn't applied any RUU.
NO
kantry123 said:
dude you have any ENG hBOOT rather than PVT-SHIP..???
Click to expand...
Click to collapse
No. I haven't yet seen HBOOT other than PVT ship for MARVEL.
finance.resat said:
Edit: uploading the radio along with hboots. All the HBOOT and Radio is ripped from official RUU for EU. I have tried the latest four radios. But the older two I'm not so sure. Uploading them for experiments anyways. Let me warn you these radio and hboot flashing is far more riskier than flashing rom. Actually this is the way you can brick your phone actually.
Radio_47.23e.35.3038H_7.57.39.10M &HBOOT_0.90.0000 (VERY RISKY)
Radio_47.23e.35.3038M_7.57.39.01M & HBOOT_1.03.0000 (RISKY)
Radio_47.23c.35.3037_7.54.39.28M & HBOOT_1.08.0000 (SAFE)
Radio_47.23a.35 .3035H_7.53.39.03M & HBOOT_1.08.0000 (SAFE)
Radio_47.10g.35.3032H_7.49.36.01M & HBOOT_1.09.0099 (SAFE)
Radio_47.10.35.3029H_7.46.35.08 & HBOOT_1.09.0099 (SAFE)
=======================================================================
Hi everyone, I had a lot of trouble after s-off my phone via XTC clip from a nearby shop. Just because my phone became HBOOT-0.90.0000. It has many disadvantages like U cant flash roms other than GB. So, after bricking my phone twice by flashing latest radio(every time I had to go back to that shop and he got a JTAG to fix the phone) I have found a solution. The first thing you need to do with your S-OFF device i think flash an RUU.
IF YOU WANT TO FLASH ONLY RADIO IT'S VERY RISKY. U NEED TO UPDATE HBOOT ETC. TO FLASH LATEST RADIO VERSIONS. NEW HBOOT IS NORMALLY INCLUDED IN RUU (Rom Update Utility). THIS HBOOT LOOKS COOL AS ITS SIMPLE.
Hboot 1.08.0000 => dowloadlink
My phone is A510e. S-OFF.
ENJOY.
** please rename the files to PG76IMG.zip before use and delete after flashing one at a time.
Click to expand...
Click to collapse
Out of curiosity why is it that every one of these files has the same hboot 1.09 in them even thought they are listed as being different????
Radio_47.23e.35.3038H_7.57.39.10M &HBOOT_0.90.0000 (VERY RISKY)
Radio_47.23e.35.3038M_7.57.39.01M & HBOOT_1.03.0000 (RISKY)
Radio_47.23c.35.3037_7.54.39.28M & HBOOT_1.08.0000 (SAFE)
Radio_47.23a.35 .3035H_7.53.39.03M & HBOOT_1.08.0000 (SAFE)
Radio_47.10g.35.3032H_7.49.36.01M & HBOOT_1.09.0099 (SAFE)
Radio_47.10.35.3029H_7.46.35.08 & HBOOT_1.09.0099 (SAFE)
machv5 said:
Out of curiosity why is it that every one of these files has the same hboot 1.09 in them even thought they are listed as being different????
Radio_47.23e.35.3038H_7.57.39.10M &HBOOT_0.90.0000 (VERY RISKY)
Radio_47.23e.35.3038M_7.57.39.01M & HBOOT_1.03.0000 (RISKY)
Radio_47.23c.35.3037_7.54.39.28M & HBOOT_1.08.0000 (SAFE)
Radio_47.23a.35 .3035H_7.53.39.03M & HBOOT_1.08.0000 (SAFE)
Radio_47.10g.35.3032H_7.49.36.01M & HBOOT_1.09.0099 (SAFE)
Radio_47.10.35.3029H_7.46.35.08 & HBOOT_1.09.0099 (SAFE)
Click to expand...
Click to collapse
nope they are not...i uploaded different... they cant get changed on the web... i will verify and remove if so... (to err is human meaning{man is mortal})
dont get confused... every ruu comes with a radio & hboot... u must apply the radio & hboot of same ruu... or there is risk of brick...

Categories

Resources