[Q] Please Help - Phone is stuck on Sammy - Epic 4G Q&A, Help & Troubleshooting

I hve been reading thru all the threads I can find. A friend of mine asked if I would root her Epic 4g, and thinking , since I have rooted the 4 I have had in the past year, it would be a breeze.
The root seemed to go fine, It rebooted, then went to instal titanium backup and Rom mgr, and the phone stuck on the Sammy screen. I have seen reference several times on placing your epic into DL mode via battery removal... Can someone please explain this to me in more detail, or point me in the right direction?? I appreciate any help I can get.

jwebe03 said:
I hve been reading thru all the threads I can find. A friend of mine asked if I would root her Epic 4g, and thinking , since I have rooted the 4 I have had in the past year, it would be a breeze.
The root seemed to go fine, It rebooted, then went to instal titanium backup and Rom mgr, and the phone stuck on the Sammy screen. I have seen reference several times on placing your epic into DL mode via battery removal... Can someone please explain this to me in more detail, or point me in the right direction?? I appreciate any help I can get.
Click to expand...
Click to collapse
u don't remove the battery to get into download mode, you hold the '1' button while powering the phone on while it's not plugged in. don't use the cord that came with the epic, find another micro-usb.

I don't think you searched hard enough. Right at the top of Development in the "stickies" is this thread that tells you everything you need to know about getting your phone working again:
http://forum.xda-developers.com/showthread.php?t=1052813

kennyglass123 said:
I don't think you searched hard enough. Right at the top of Development in the "stickies" is this thread that tells you everything you need to know about getting your phone working again:
http://forum.xda-developers.com/showthread.php?t=1052813
Click to expand...
Click to collapse
+1, always read the stickies first...

I read the stickies, and I have used Odin hundreds of times, I have a great data cord, (I have a friend that works for RIM and so I use the Blackberry data chords for my Data cables... What is happening, is that when the battery is replaced after removal, the phone starts back up immediately, not allowing me to press the 1 button. If I replace the battery while I am holding down the 1 button... it still will not go into DL mode. I have pulled the battery and let it stand for overnight with no battery in it... still does the same thing...

bender beerman said:
+1, always read the stickies first...
Click to expand...
Click to collapse
If you continue to read all the way down to the "troubleshooting" portion of that stickie - you would have seen the mthod or thequotes I am referencing... "Allways read the ENTIRE sticky... B)
Sent from my SPH-D700 using xda premium

jwebe03 said:
If you continue to read all the way down to the "troubleshooting" portion of that stickie - you would have seen the mthod or thequotes I am referencing... "Allways read the ENTIRE sticky... B)
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
+1 always read ENTIRE sticky first...
Sent from my SPH-D700 using XDA App

jwebe03 said:
I read the stickies, and I have used Odin hundreds of times, I have a great data cord, (I have a friend that works for RIM and so I use the Blackberry data chords for my Data cables... What is happening, is that when the battery is replaced after removal, the phone starts back up immediately, not allowing me to press the 1 button. If I replace the battery while I am holding down the 1 button... it still will not go into DL mode. I have pulled the battery and let it stand for overnight with no battery in it... still does the same thing...
Click to expand...
Click to collapse
Don't use the battery at all. Odin without it and stick it in when it is all done. The USB provides the power. In that stickie thread it tells you to plug the phone into the computer without a battery and then hold the 1 key and then add pressing and holding the power key and download mode will pop up.

kennyglass123 said:
Don't use the battery at all. Odin without it and stick it in when it is all done. The USB provides the power. In that stickie thread it tells you to plug the phone into the computer without a battery and then hold the 1 key and then add pressing and holding the power key and download mode will pop up.
Click to expand...
Click to collapse
Thanks! I will try it as soon as I get home... I didn't catch the "sequence" I was pressing both at the same time as I would with the Battery in...
Sent from my SPH-D700 using xda premium

jwebe03 said:
Thanks! I will try it as soon as I get home... I didn't catch the "sequence" I was pressing both at the same time as I would with the Battery in...
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Yeah if the phone detects that you pressed the power button a microsecond ahead of the 1 key it will just boot.
Sent from my SPH-D700 using XDA App

It STILL didn't work! Ugh!! Dang... I have put all 4 epics that I have owned thru Flashing HELL! And everyone I have been able to bring back. This thing is tougher than this! Lol!! It needs the "walk it off" speech!! And what I don't understand is, why is it STILL booting on its own??? It is my understanding that the internal memory power fades after a couple hours and that then it will fall back to a completely shut off state?? I'm thinking a week in isolation w/o its battery... we'll see who the tough guy is then!! Lol!
Sent from my SPH-D700 using xda premium

Just for giggles, have you tried an odin with the sd card out?

Yes try it with the sd card out. It should not boot at all without the battery and just the usb cable.
Sent from my SPH-D700 using XDA App

Related

[Q] Bricked during el13 frimware upgrade

Hello all, my name is Matt.
I bricked my Epic 4G Galaxy S installing the EL13 firmware.
I had it rooted with CWM 5.0.2.7 (or whatever) with CleanGB 1.03 and the Samurai kernal (think it's 1.06, whichever is the latest). I was flashing it through Odin3 and it abruptly aborted and failed the transfer. I'm thinking it may have been a bad USB cable. I pulled the battery since it didn't reboot or take any button commands.
I does not show the Samsung logo, and when i plug in power/usb cable it does not show a red light. Do i have to do the Unbrickable MOD or is there anything I can do through a PC?
emtee40 said:
Hello all, my name is Matt.
I bricked my Epic 4G Galaxy S installing the EL13 firmware.
I had it rooted with CWM 5.0.2.7 (or whatever) with CleanGB 1.03 and the Samurai kernal (think it's 1.06, whichever is the latest). I was flashing it through Odin3 and it abruptly aborted and failed the transfer. I'm thinking it may have been a bad USB cable. I pulled the battery since it didn't reboot or take any button commands.
I does not show the Samsung logo, and when i plug in power/usb cable it does not show a red light. Do i have to do the Unbrickable MOD or is there anything I can do through a PC?
Click to expand...
Click to collapse
EL13? Could you link what you were trying to flash? I don't think its for our phone buddy
But either way have you tried taking out the battery and sdcard only plugging it in?
Sent from my SPH-D700 using xda premium
It's the firmware/2.3.6 leaked from samsung I found here.
Is it for the S2?
*EDIT*
Effin crap. Rookie mistake I'm taking it. I didn't pay attention to the 'Touch' in the column for phone. Can I use the Unbrickable MOD to put in the files I need back in it after flashing it in the wrong firmware???
emtee40 said:
It's the firmware/2.3.6 leaked from samsung I found here.
Is it for the S2?
Click to expand...
Click to collapse
Yes it is. Check the forum you are on...
Sent from my SPH-D700 using Tapatalk
sonuvabitch
I'm not a forum newbie (I do a lot of audio engineering), so I feel like a BIG idiot for not double checking my info. I spent 2 week researching rooting before I did it.
I guess I had to much confidence...
I'll make a vid of me doing the Unbrickable MOD for ya guys when I get around to doing it. If I don't mess that up...
emtee40 said:
sonuvabitch
I'm not a forum newbie (I do a lot of audio engineering), so I feel like a BIG idiot for not double checking my info. I spent 2 week researching rooting before I did it.
I guess I had to much confidence...
I'll make a vid of me doing the Unbrickable MOD for ya guys when I get around to doing it. If I don't mess that up...
Click to expand...
Click to collapse
Sorry man id try using odin, iirc the unbrickable mod didn't end up working for us?
Sent from my SPH-D700 using xda premium
emtee40 said:
sonuvabitch
I'm not a forum newbie (I do a lot of audio engineering), so I feel like a BIG idiot for not double checking my info. I spent 2 week researching rooting before I did it.
I guess I had to much confidence...
I'll make a vid of me doing the Unbrickable MOD for ya guys when I get around to doing it. If I don't mess that up...
Click to expand...
Click to collapse
Audio engineering ? How is it? I want to pursue that career after highschool
Sent from my SPH-D700 using XDA Premium App
don't do an unbrickable mod, just download the right file from the sticky in the android dev. section and odin it from download mode. make sure you have the right file!!! it's "EC05" ... good luck!
So if the Unbrickable mod don't work, how am i supposed to get odin to work? it doesn't show up in the COM list when i plug the phone in. I tried the no sdcard/battery trick, and it doesn't do anything.
Am I up the creek then?
*EDIT*
I can't get into download mode. No buttons re-act. It's a hard brick, not a soft brick. I've search everywhere. If it can't be fixed, anybody need parts???
emtee40 said:
So if the Unbrickable mod don't work, how am i supposed to get odin to work? it doesn't show up in the COM list when i plug the phone in. I tried the no sdcard/battery trick, and it doesn't do anything.
Am I up the creek then?
*EDIT*
I can't get into download mode. No buttons re-act. It's a hard brick, not a soft brick. I've search everywhere. If it can't be fixed, anybody need parts???
Click to expand...
Click to collapse
Try popping the battery in and out repeatedly while attempting to go into download mode. It will eventually reset the phone and work. Then try all USB ports until Odin reacts. You will have to pull the battery and reset for Odin to successfully repeat after that. If no ports show the phone, try a Blackberry cable or any other one but stock. Also reinstall the drivers.
emtee40 said:
So if the Unbrickable mod don't work, how am i supposed to get odin to work? it doesn't show up in the COM list when i plug the phone in. I tried the no sdcard/battery trick, and it doesn't do anything.
Am I up the creek then?
*EDIT*
I can't get into download mode. No buttons re-act. It's a hard brick, not a soft brick. I've search everywhere. If it can't be fixed, anybody need parts???
Click to expand...
Click to collapse
Try holding power and 1 with the battery and sd card out and plug in the cable at the same time.
Sent from my SPH-D700 using xda premium
I'll try the download mode W/USB when I get home. I'll try the battery removal tip to. I let it sit for 1 hr then put in the battery and nothing happened. Like I said, even when I plug in the charger the LED don't come on.
emtee40 said:
I'll try the download mode W/USB when I get home. I'll try the battery removal tip to. I let it sit for 1 hr then put in the battery and nothing happened. Like I said, even when I plug in the charger the LED don't come on.
Click to expand...
Click to collapse
Try plugging it in with no battery
Sent from my SPH-D700 using xda premium
Don't Panick Yet
I had a problem flashing ACS recovery with a corrupt zip that effectively bricked my phone to the point Sprint Techs declared it dead and ordered me a replacement. Let me tell you something that worked to revive that phone. Pull off the battery cover. Look just down and to the left of the camera lens for a small button that you press with a pin/paper clip/etc. If I recall, press and hold it for about 5 - 10 seconds, and when you go to boot up, it will immediately boot into download mode. That let me revive my completely non responsive (No charging LED, battery ICON, boot, etc) Epic 4G
kennyglass123 said:
Try popping the battery in and out repeatedly while attempting to go into download mode. It will eventually reset the phone and work. Then try all USB ports until Odin reacts. You will have to pull the battery and reset for Odin to successfully repeat after that. If no ports show the phone, try a Blackberry cable or any other one but stock. Also reinstall the drivers.
Click to expand...
Click to collapse
What kenny said... my neice has flashed the wrong roms on numerous occasions and not once was I not able to get her back into download mode with the slipping the battery in and out while holding 1 and power button while doing it... keep trying it will go... these phones are very hard to brick...
Sent from my SPH-D700 using Tapatalk
emtee40 said:
So if the Unbrickable mod don't work, how am i supposed to get odin to work? it doesn't show up in the COM list when i plug the phone in. I tried the no sdcard/battery trick, and it doesn't do anything.
Am I up the creek then?
*EDIT*
I can't get into download mode. No buttons re-act. It's a hard brick, not a soft brick. I've search everywhere. If it can't be fixed, anybody need parts???
Click to expand...
Click to collapse
Buttons don't work in download mode, nothing works in download mode. It's not standard user mode. Get a better USB cord, and/or plug the cord into the BACK of your computer (ie USB port directly on the motherboard). If that doesn't work, try a newer computer. Also make sure ALL the drivers are installed and fully updated. Also, have Odin open and set up before plugging your phone in (obviously, while in download mode). You're not bricked yet! Just sponged...
BEER!
HODriver said:
I had a problem flashing ACS recovery with a corrupt zip that effectively bricked my phone to the point Sprint Techs declared it dead and ordered me a replacement. Let me tell you something that worked to revive that phone. Pull off the battery cover. Look just down and to the left of the camera lens for a small button that you press with a pin/paper clip/etc. If I recall, press and hold it for about 5 - 10 seconds, and when you go to boot up, it will immediately boot into download mode. That let me revive my completely non responsive (No charging LED, battery ICON, boot, etc) Epic 4G
Click to expand...
Click to collapse
Non exsistent button. I use to believe it, but it's fake.
Sent from my SPH-D700 using xda premium
Originally Posted by emtee40 View Post
So if the Unbrickable mod don't work, how am i supposed to get odin to work? it doesn't show up in the COM list when i plug the phone in. I tried the no sdcard/battery trick, and it doesn't do anything.
Am I up the creek then?
*EDIT*
I can't get into download mode. No buttons re-act. It's a hard brick, not a soft brick. I've search everywhere. If it can't be fixed, anybody need parts???
bender beerman said:
Buttons don't work in download mode, nothing works in download mode. It's not standard user mode. Get a better USB cord, and/or plug the cord into the BACK of your computer (ie USB port directly on the motherboard). If that doesn't work, try a newer computer. Also make sure ALL the drivers are installed and fully updated. Also, have Odin open and set up before plugging your phone in (obviously, while in download mode). You're not bricked yet! Just sponged...
BEER!
Click to expand...
Click to collapse
he said he can't get into download mode. but you could always take it to sprint if you have insurance. just play dumb say the phone wanted to update and the batttery fell out or something like that. before you do that if you have a stand alone battery charger charge your battery on that and retry. I have 2 batterys and when i tried to get my phone UN-bricked both of the batterys had no juice in them. hope you can get it working again.
The hardware reset button its there, I'm looking at it on my phone now. Don't try if you don't want to, I don't really care.
Sent from my SPH-D700 using XDA App
HODriver said:
The hardware reset button its there, I'm looking at it on my phone now. Don't try if you don't want to, I don't really care.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Take your phone apart and take a picture of the "button" then... 50 dollars says there is no button there... and no I'm not talking about the hole I want a pic of the actual button... 50 bucks to anybody that can take a pic of this so called resurection button!!.!!!
Sent from my SPH-D700 using Tapatalk

[Q] bricked? and won't power up (while trying to unroot)

I may have bricked my phone, and now won't power up at all. Here's what happened.
Last night I tried to unroot my phone in order to install EL30. First I powered phone into download mode. Then used Odin to install EC05, but Odin seemed to be taking forever, as the instructions said it would take 7-8 minutes... It appeared to be working but very slowly. So after half an hour, I decided to let it work overnight and went to bed, leaving the Odin screen running on computer and the phone with yellow "Downloading" on screen.
This morning, the Odin screen had several more lines of successful completed steps, but did not say "Finished" yet. The phone screen was off. I thought maybe the battery had died because perhaps in download mode maybe the battery wasn't charging? So I unplugged it from USB cord, put in a fully charged battery, and now to my problem...
Phone won't power up or do ANYTHING. I know of 3 methods to power up phone, (pwr button, #1 + pwr, volume up + camera + pwr) and none of them are doing anything. screen never changes from black. I've removed battery, tried powering up while plugged into usb/computer, with & without sd card, etc. It's like the phone is just broke!
HELP?!
Hold down the little pin next to the camera. Also wait for awhile and eventually itll go into download mode. Make sure you keep the battery out when trying to go into download mode.
Sent from my C9AN0GEN-MOd EpicOG
Also, did you have repartition checked? Only auto reboot should be selected unless your coming from mtd.
Sent from my C9AN0GEN-MOd EpicOG
b16flybye said:
Hold down the little pin next to the camera. Also wait for awhile and eventually itll go into download mode. Make sure you keep the battery out when trying to go into download mode.
Sent from my C9AN0GEN-MOd EpicOG
Click to expand...
Click to collapse
DUDE THERES NO BUTTON [email protected]!?!$#%^?
To the OP:
Did you try leaving the battery out and having plugged into the back of the desktop *if of course its a desktop* and tried to go into download mode using the pc as its power source? Is it a nonstock cable that you used?. Its more than likely because you didn't have a non-stock cable or yours was bad and need a new one. Odin shouldn't take but 5 minutes top..... mine does it around 3:30 minutes..if it seems like its hangs then redo it pull the plug and start over. Usually factoryfs.rfs takes the longest around 2minutes.
Sent From My SPH-D700 Running Android 4.0 :sly:
Biggoron said:
DUDE THERES NO BUTTON [email protected]!?!$#%^?
To the OP:
Did you try leaving the battery out and having plugged into the back of the desktop *if of course its a desktop* and tried to go into download mode using the pc as its power source? Is it a nonstock cable that you used?.
Sent From My SPH-D700 Running Android 4.0 :sly:
Click to expand...
Click to collapse
I think he is talking about on the back of the phone it looks like there is a small recessed button under the left of the camera lens
K3VlN said:
I think he is talking about on the back of the phone it looks like there is a small recessed button under the left of the camera lens
Click to expand...
Click to collapse
I know what he's talking about he "thinks" inside that hole there's a reset button. There's not....
Sent From My SPH-D700 Running Android 4.0 :sly:
First get a better cable, that's why the data wouldn't transfer. 2nd take out the battery and sd card, with Odin up on the computer connect the New USB cable and quickly put it into download mode and Odin away. At this point include the PIT and check repartition. You will need to put the battery back in after it succeeds and tries to boot. For mor tips sea+ch the Development forum for "How to recover a semi-bricked epic" there is a whole thread on it.
Sent from my SPH-D700 using XDA App
No luck on any of the suggestions above. Phone will not power up at all.
I removed battery and SD card, and plugged into usb cable with Odin open on computer and tried powering up phone into Download Mode (#1 + pwr), nothing (also tried holding #1 + pwr for a couple minutes patiently).
I have had a nightmare trying to find a usb cable and usb port on my computer that work together. No this is not the stock Samsung cable. I am using a cable that has worked for me in the past, but often times a cable/port that works one day won't work the next. So you are probably right in that my original issue getting Odin to download to phone last night may have been a cable problem, however my current problem is simply that the phone seems to be nothing more than a paper weight right now. Just won't power up at all.
And no, I didn't have repartition checked. Phone only had been rooted and CMW, no MTD.
Thank you all for your help, and eagerly awaiting additional suggestions?
Umm yeah man bad idea leaving it alone looks like its time to visit the morgue.... search online to see if someone will restore a solid brick its possible especialy if you cannt use a jig to get into download mode
There are people who will hook up their pc to the main chip on the phone and restore it that way.
Sent from my SPH-D700 using xda premium
Biggoron said:
Umm yeah man bad idea leaving it alone looks like its time to visit the morgue.... search online to see if someone will restore a solid brick its possible especialy if you cannt use a jig to get into download mode
There are people who will hook up their pc to the main chip on the phone and restore it that way.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Pardon my ignorance, I'm learning... But what is a jig?
jcole2424 said:
Pardon my ignorance, I'm learning... But what is a jig?
Click to expand...
Click to collapse
Its basically a an ohm resister and a usb port you can google it "download mode jig
You can acutally make a homemade one google will find a how to also ..... this will "jump" you into DLmode and be able to odin.
Sent from my SPH-D700 using xda premium
Biggoron said:
Its basically a an ohm resister and a usb port you can google it "download mode jig"
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Try holding 1 and power button and sliding the battery in and out until download mode boots... it has worked for numerous people in your position...
Sent from my SPH-D700 using Tapatalk
flastnoles11 said:
Try holding 1 and power button and sliding the battery in and out until download mode boots... it has worked for numerous people in your position...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Yes, exactly this^^^^^^^^^^^^^^^^^^^^^^^^
It is like the phone goes into some kind of coma and popping the battery in and out while trying to get into download mode is CPR.
flastnoles11 said:
Try holding 1 and power button and sliding the battery in and out until download mode boots... it has worked for numerous people in your position...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
COMPLETELY forgot about that thanks flast
Sent from my SPH-D700 using xda premium
I'm no pro a bringin epics back from the dead but in his condition I believe the phone is completely dead. I've done this to my phone on several different occasions just to get my phone replaced lol. My good friend works for a sprint repair center and he said that most times pulling the usb during odin will kill the device. I'm not tring to be pessamistic as I really hope you fix it but from what your saying then its VERY VERY unlikely! Especially if you hit repartition and then pulled the cord... if you don't belive me then try it and let me know how it goes lol
Sent from my SPH-D700 using Tapatalk
travismoreno said:
I'm no pro a bringin epics back from the dead but in his condition I believe the phone is completely dead. I've done this to my phone on several different occasions just to get my phone replaced lol. My good friend works for a sprint repair center and he said that most times pulling the usb during odin will kill the device. I'm not tring to be pessamistic as I really hope you fix it but from what your saying then its VERY VERY unlikely! Especially if you hit repartition and then pulled the cord... if you don't belive me then try it and let me know how it goes lol
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Probably 4 out of 5 of these bricks caused by a failed Odin have come back to life by popping the battery in and out and trying to get into download mode. I can count the number that I have seen never come back on my hands. Some people give up to soon, others found leaving it overnight and trying again has worked. But a lot have been revived. Also he did not have repartition checked so has an even better chance.
When you try to put in download mode without the battery are you holding the buttons down while plugging the cable in? If not then do it that way
Sent from my SPH-D700 using xda premium
Biggoron said:
DUDE THERES NO BUTTON [email protected]!?!$#%^?
No need to roll your eyes, geez. What is that button then? Cause there IS a button there.
Sent From My SPH-D700 Running Android 4.0 :sly:
Click to expand...
Click to collapse
Sent from my C9AN0GEN-MOd EpicOG
Man this sucks if any of the aforementioned methods dont work it sounds like you are going to have th make a JTAG to unbrick your phone i found this on the capitvate forums a while back been keeping it around just in case but you can give it a try. i have never had to try any of these methods so if you do let us know how it goes
http://forum.xda-developers.com/showthread.php?p=15330252#post15330252
if nothing else you can always try to take it to sprint and act like you have no idea what happened and dont mention anything about rooting and take your sd card out cause it contains root files
hope you get this worked out bud
b16flybye said:
Sent from my C9AN0GEN-MOd EpicOG
Click to expand...
Click to collapse
Okay then take apart your phone and please take a picture of your non exisitent magical reset button.....there is no button never has been never will be..... people think there is because they usualy left their battery out long enough for the phone to lose charge.
Sent From My SPH-D700 Running Android 4.0 :sly:

[Q] I need help, possible bricked phone

I tried to flash the aokp m5 rom but didn't flash the el26 cwm file. Now when i try to boot the phone, it doesn't start. the blue light just lights up and stays light untill i pull the battery. I also tried to get into recovery and it just does the same thing. I downloaded odin, but im not sure what im supposed to do with it. if anyone knows how to help, i would be extremely grateful. Thank you
Pull battery, put back in, hold volume down to get in download mode, start Odin on pc , plug in phone, press volume up, Odin should respond with COM# click the phone button and select your stock from such as the cwm el26. Just read the forums. Don't feel bad it happens to all of us once in awhile. Thankfully I have managed to fix most of my screw ups. Next time just read everything and save yourself hours......experience
But then again that could make it worse. So for ya sake use the search button
My phone doesn't allow me to get into download mode mode... Does that mean it is bricked?
Well I have more than once brought my device that I though would never come back. I know I have got ton my phone and my friends att infuse to connect to Odin without actually getting a screen on the phone and was able to get a recovery to restore the phone back to normal. From my experience though its been hard to brick these things... I sometimes wonder if people bricking is just user error.... knock on wood....
OmarEvo said:
My phone doesn't allow me to get into download mode mode... Does that mean it is bricked?
Click to expand...
Click to collapse
I don't know what that other guy was saying but you have to hold the volume down Button and the power button until it shows the custom OS menu the press volume up and then download sfhubs one-click EL29 and then open it, its in development fyi, connect your cable to your PC and your phone and the program will have a yellow box light up that will say COM#, don't worry about the number next to COM, then press start and wait until it reboots. Do not unplug the phone or close the program. If it works for you please respond back here so others can hear the results.
Sent from my SPH-D710 using xda premium
Is your phone recognized by adb? Maybe try "adb reboot download"?
Also if you read up about a jigg for the epic touch, in case this doesn't work, them that could also fix it. You might need to spend something though but I can't clarify this because i've never bricked before.
Sent from my SPH-D710 using xda premium
Nabbu said:
I don't know what that other guy was saying but you have to hold the volume down Button and the power button until it shows the custom OS menu the press volume up and then download sfhubs one-click EL29 and then open it, its in development fyi, connect your cable to your PC and your phone and the program will have a yellow box light up that will say COM#, don't worry about the number next to COM, then press start and wait until it reboots. Do not unplug the phone or close the program. If it works for you please respond back here so others can hear the results.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yea he's explained it better than be. I'll just be posting from my laptop here on out. On screen keyboards kill me. I miss my g1s QWERTY. Ah well.
I press volume down and power but the custom os screen doesn't show up, all the phone does flash the blue notification light and the screen looks as if it is off.
This isnt something that a jig can help and for everyone else trying to help he cant access download mode or recovery.
You're most likely hard bricked and the only thing you could try is to leave the battery out overnight then try to turn the phone on again. If you still have black screen with just the notification LED on then the last resort would be a jtag service which isnt guaranteed to work either.
This is a known issue from wiping any partitions on an ics kernel.
What would a jtag service be?
You're going to need a USB jig to get your computer to recognize your phone to download the firmware over the current one. Wait till tomorrow if someone doesn't respond because i'm assuming all the devs and admins are knocked out and they are the ones who can help.
Sent from my SPH-D710 using xda premium
Geez a lot got posted while I was typing.
Seeing as how you can't get into download mode or recovery I'm afraid you're out of luck. (unless the jigg thing works, which I don't think will at this point)
This is a hard lesson to learn but exactly why you don't take any shortcuts when flashing custom ROMs.
What is a jtag service, and how would I go about it if I tried to get it done?
Thanks for helping them out! Its late and I forgot about the overnight battery pull and jtag.
Sent from my SPH-D710 using xda premium
OmarEvo said:
What is a jtag service, and how would I go about it if I tried to get it done?
Click to expand...
Click to collapse
Do a search in this forum, since there's been a lot of bricking I'm sure you'll find a ton of threads concerning this.
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/
Thats one of the companies offering jtag services. I believe some people have used it before but im not sure of their results.
Yeah, I'm only sixteen, so I'm trying to grasp all these different things. I'm used to htc because i had an evo, then i got an evo 3d. I use the e4gt as a second phone, but all the things for a rooted samsung are completely different compared to an htc. Thank you for all your help guys. I have learned my lesson now
Good luck. I hope the overnight battery pull helps or that the jtag folks can get you up and running.
For the overnight battery pull, when I try to boot it, should I try to put it into download mode? Or just plain boot? Thanks again

Epic wont turn after odin...any suggestions?

Fml
Sent from my SPH-L710 using xda app-developers app
metalnerd27 said:
Fml
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
This happened to me and what I did was plug into a wall (not PC), take battery out, hold 1 and power (for DL mode) for as long as 30 seconds if needed until the construction guy shows up and it says downloading. Then, put battery back in phone and put USB in and put in a PC. Then take battery back out and Odin. You may have to repeat this several times if the flash doesn't take or gives errors.
This might help...
I hard-bricked my Epic a few days ago and couldn't power-up or get into DL mode at all, with or without the battery, waiting hours, etc. There's a [How to] thread in the Dev section, I think, that talks about a hidden system reset button. That did not work for me and as far as I can tell is just myth. Searching further, I came across a post (and I can't find it now) that mentioned pressing the power button TWICE with the battery in. I tried that and Voila! Success! I then connected to the USB and pulled the battery ans was able to Odin back to a good build.
Good luck!
Al
arschend said:
I hard-bricked my Epic a few days ago and couldn't power-up or get into DL mode at all, with or without the battery, waiting hours, etc. There's a [How to] thread in the Dev section, I think, that talks about a hidden system reset button. That did not work for me and as far as I can tell is just myth. Searching further, I came across a post (and I can't find it now) that mentioned pressing the power button TWICE with the battery in. I tried that and Voila! Success! I then connected to the USB and pulled the battery ans was able to Odin back to a good build.
Good luck!
Al
Click to expand...
Click to collapse
There is no hidden or secret reset button. That thread from back in the EB13 days was debunked long ago.
Sent from my Nexus 7 using Tapatalk 2

[Q] dead phone after Jiedi Master 16 ROM flash

Hi All,
I tried to flash Jedi Master 16 ROM http://forum.xda-developers.com/show....php?t=1958230 to my ATT unlocked E980 LGGP for T-Mobile. Now the phone is dead, i.e. not responding to anything. Please please help.
Rooting and installing recovering image, Optimus G Pro How to get ClockworkMod CWM and make a backup | LG Optimus Forums - Android Optimus Forums
were successful. Flashed the stock Jedi Master 16 ROM (no change to the zip) all seemed fine till the installer prompt me to reboot with successful installation message displayed. After confirming rebooting, the phone is no longer responsive. Battery is fully charged before I left it alone over night (~6hrs). Battery still had full voltage in the morning. Battery pulled/reinserted a couple times, volume down+home+power pressed many times. Phone still does not respond at all. Connected to the computer, and the computer said the device driver installation failed.
Searched everywhere and found mentioned "deep sleep" symptom. However, battery was not drained. The so called "bricked" seems to referring to looping in booting. Mine is simple not responding to anything at all with or without battery in, with or without wall charger connected, no matter what key/keys pressed.
I suspect that I should have put the right modem file into the Jedi Master 16 zip file.
Please help and thank you in advance.
I'm not even sure what to say.. Why the hell would you install a Samsung Note 2 ROM on your E980???
Can you at least get into recovery mode?
Pull battery then put back in
Hold vol-up+power+home until it passes the lg logo and goes black then release.
Are you in clockworkmod recovery?
My bad. Thought Jedi X is Note 2 specific and Jedi Master is somewhat generic.
Phone won't even boot. Screen is off, and no LED lights/sign of life anywhere with the battery trick and vol-up/down + power + home trick.
When the battery pulled and USB powered, the back and menu led flashed (white) once. Then no more sign of life no matter what key(s) + power buttons combo press.
MrDSL said:
I'm not even sure what to say.. Why the hell would you install a Samsung Note 2 ROM on your E980???
Can you at least get into recovery mode?
Pull battery then put back in
Hold vol-up+power+home until it passes the lg logo and goes black then release.
Are you in clockworkmod recovery?
Click to expand...
Click to collapse
lampadephoria said:
My bad. Thought Jedi X is Note 2 specific and Jedi Master is somewhat generic.
Phone won't even boot. Screen is off, and no LED lights/sign of life anywhere with the battery trick and vol-up/down + power + home trick.
When the battery pulled and USB powered, the back and menu led flashed (white) once. Then no more sign of life no matter what key(s) + power buttons combo press.
Click to expand...
Click to collapse
The only forum you flash roms out of is this one and it must be for the E980. Your only hope is to try and flash back to stock
http://forum.xda-developers.com/showthread.php?t=2302660
if that works and you're back on stock then root and after that you have to use FreeGee to install a loki recovery..i suggest the cwm one. just make sure to select unlock security etc
good luck
http://forum.xda-developers.com/showthread.php?t=2371927
I understand what I should do after the phone boots up. Thank a lot for the resources.
However, I am stuck with how to make the phone boot. Is there a hardware reset button?
Methods tried so far:
1. Pull and reinsert battery, then press power button.
2. Pull and reinsert battery, then press (vol-up/down) + (camera shutter) + (home) + (power button).
3. Left the phone alone for 6hr (no USB charging). Battery is at full voltage (4.12v). Then following step 1 or 2.
MrDSL said:
The only forum you flash roms out of is this one and it must be for the E980. Your only hope is to try and flash back to stock
http://forum.xda-developers.com/showthread.php?t=2302660
if that works and you're back on stock then root and after that you have to use FreeGee to install a loki recovery..i suggest the cwm one. just make sure to select unlock security etc
good luck
http://forum.xda-developers.com/showthread.php?t=2371927
Click to expand...
Click to collapse
lampadephoria said:
I understand what I should do after the phone boots up. Thank a lot for the resources.
However, I am stuck with how to make the phone boot. Is there a hardware reset button?
Methods tried so far:
1. Pull and reinsert battery, then press power button.
2. Pull and reinsert battery, then press (vol-up/down) + (camera shutter) + (home) + (power button).
3. Left the phone alone for 6hr (no USB charging). Battery is at full voltage (4.12v). Then following step 1 or 2.
Click to expand...
Click to collapse
Dude you need to simply do this. Pull battery, put battery back in, hook to computer and while plugging in the cable to your phone, hold volume up and down. If you see the 'download mode' box in the middle of the screen, YOURE SAVED, IF NOT THEN YOURE ****ED!
Never flash anything unless you know what you're doing. I seriously advise you to do a serious amount of reading before ampting any flashing if anything!
Sent from my LG-E980 using XDA Premium 4 mobile app
Points are well taken! I was in a rush which I definitely did not have to.
Tried the vol-up+down combo tip. No response. I guess I need to resort to some JTAG repair.
Thanks a lot.
Jammol said:
Dude you need to simply do this. Pull battery, put battery back in, hook to computer and while plugging in the cable to your phone, hold volume up and down. If you see the 'download mode' box in the middle of the screen, YOURE SAVED, IF NOT THEN YOURE ****ED!
Never flash anything unless you know what you're doing. I seriously advise you to do a serious amount of reading before ampting any flashing if anything!
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello,
Does the CM10 ROM support wifi calling feature for Tmobile?
Thanks a lot.
MrDSL said:
The only forum you flash roms out of is this one and it must be for the E980. Your only hope is to try and flash back to stock
http://forum.xda-developers.com/showthread.php?t=2302660
if that works and you're back on stock then root and after that you have to use FreeGee to install a loki recovery..i suggest the cwm one. just make sure to select unlock security etc
good luck
http://forum.xda-developers.com/showthread.php?t=2371927
Click to expand...
Click to collapse
I mean really LMFAO why
Sent from my LG-E980 using xda premium
lampadephoria said:
Points are well taken! I was in a rush which I definitely did not have to.
Tried the vol-up+down combo tip. No response. I guess I need to resort to some JTAG repair.
Thanks a lot.
Click to expand...
Click to collapse
I dont think there is such thing as a Jtag repair for this phone, if there is no one knows yet.
Also if your going to be flashing just any kind of rom you might like I dont think you should flash anymore roms lol.
Wow, u do know that the note 2 is not the same as lg og pro?
sent from my OG PRO using tapatalk 4
lampadephoria said:
Points are well taken! I was in a rush which I definitely did not have to.
Tried the vol-up+down combo tip. No response. I guess I need to resort to some JTAG repair.
Thanks a lot.
Click to expand...
Click to collapse
It's volume down and power button, hold it simultaneously for about 10-15 seconds.
Sent from my LG-E980 using xda app-developers app
Not sure if legit or trolling?
Sent from my LG-E980 using Tapatalk 2
Clienterror said:
Not sure if legit or trolling?
Sent from my LG-E980 using Tapatalk 2
Click to expand...
Click to collapse
Methinks the former. The OP took a "parts is parts" approach to Android and made an expensive mistake.
Unbricked
My phone is finally unbricked using JTAG thanks to this man!
http://www.ebay.com/itm/Google-LG-N...364?pt=LH_DefaultDomain_0&hash=item3f2334d40c
Everything is bright and shine except the partition table is screwed up where all apps (like camera app) see there is no space in the internal sd card. Waiting on the external micro sd card to arrive. Hopefully that will make the phone usable (beyond just browsing and installing apps).
In this stage, I can't even root it since the rooter can't write onto the internal memory space. And Android Partition Manager Pro, who requires the phone to be rooted at first, won't help either.
Does any one know how to repartition without rooting? Thanks a lot.
This whole thread.....so painful. Some people should not be allowed to have a smartphone...keyword smart
Sent from my LG-E980 using XDA Premium 4 mobile app

Categories

Resources