Here are some update packages. Usefull to upgrade or recover your tablet.
Full Package (flash trought recovery)
Acer_A101_1.008.06_COM_GEN1 : http://vache-android.com/v1/download.php?fileID=116
Acer_A101_1.013.09_COM_GEN1 : http://vache-android.com/v1/download.php?fileID=115
Acer_A100_1.014.08_COM_GEN1 : http://vache-android.com/v1/download.php?fileID=109
Click to expand...
Click to collapse
Update (flash trought recovery)
Acer_A100_1.014.08_2.007.01_COM_GEN1 : http://dl.dropbox.com/u/8822437/update.zip (thx to aznmode)
Click to expand...
Click to collapse
EUU (flash trought APX mode)
EUUs_SBK_Acer_A100_1.008.05_COM_GEN1 : http://vache-android.com/v1/download.php?fileID=117
Click to expand...
Click to collapse
The topic will be completed when i'll have more files.
Interesting... I didn't think the A101 was released yet?
Well done, we need it very much
FloatingFatMan said:
Interesting... I didn't think the A101 was released yet?
Click to expand...
Click to collapse
You are on all Acer topics
Do you have all Acer android based devices ?
if we flash bootloader.bin of A500 instead of A100，will it replace the bootloader and come back to flash CWM recovery and make it works without verifiled failed？？？
kimycai said:
if we flash bootloader.bin of A500 instead of A100，will it replace the bootloader and come back to flash CWM recovery and make it works without verifiled failed？？？
Click to expand...
Click to collapse
That's not something you should try.
vache said:
You are on all Acer topics
Do you have all Acer android based devices ?
Click to expand...
Click to collapse
Maaaaaaaaaaaaaaybe...
Great post! This is what I've been waiting for! Now I can have some fun and still have the safety-net to save my arse when I inevitably screw something up.
Thanks a lot, I have recovered from ROM Acer_A100_1.022.02_AAP_CUS4 to Acer_A100_1.014.08_COM_GEN1 without any issue.
will any version recover any a100? Also do you just put update.zip in the root and boot to recovery?
Could you please describe how. I tried the APX, but it always says wrong CPUID number, even though it is the right one that I enter.
vache said:
Here are some update packages. Usefull to upgrade or recover your tablet.
The topic will be completed when i'll have more files.
Click to expand...
Click to collapse
Can these roms be overclocked?
Sent from Wicced's rooted A100 16gb HoneyComb 3.2 using XDA PREMIUM
wicced247 said:
Can these roms be overclocked?
Sent from Wicced's rooted A100 16gb HoneyComb 3.2 using XDA PREMIUM
Click to expand...
Click to collapse
No. They're stock ROMs, not custom ROMs.
Just wanted to tell the OP thanks, you saved me after i hosed up my a100 by messing around with the build.prop trying to get HBO Go and Hulu+ to work.
For those who don't know, if you want to use the update.zip, you put it on the root of your External SD card, it does not go on your internal SD in the a100. Then boot into recovery by holding up on the volume rocker and powering up.
KellRT said:
Could you please describe how. I tried the APX, but it always says wrong CPUID number, even though it is the right one that I enter.
Click to expand...
Click to collapse
I worked really hard to flash it as well because I saw it as a way to flash my own custom system.img...
However, with the stock image, I couldn't get it to flash... same error... didn't like my cpuid... and I tried it many ways...
But, I think that is a good thing. I closely compared the A500 Upgrade Software with our A100 and it looks like the A100 package is using the same partition layout as the A500.... this is a worry because, in another thread, it's been reported that the boot and recovery partitions are larger for the A100 than the A500... So we should expect a different partition layout for the A100 - at least when it comes to size...
I think the EUU package maybe significantly predates some changes made to the A100/A101 before release.
---------- Post added at 10:58 AM ---------- Previous post was at 10:55 AM ----------
Successfully flashed the A101 releases to my A100 (for good reason...) using Acer's recovery.
However, could not root the latest A101 release.
Has anyone managed to root that A101 ROM yet? The A100 method certainly doesn't work on it...
Is the roms Android 3.2? And what's the difference with the a100 3.2 rom?
Sent from Wicced's rooted A100 16gb HoneyComb 3.2 using XDA PREMIUM
wicced247 said:
Is the roms Android 3.2? And what's the difference with the a100 3.2 rom?
Click to expand...
Click to collapse
The a101 rom was 3.2.1. When I checked in build.prop, the release date was October 11.
No obvious 3g stuff in Wireless networks except for Tethering.
I tried for the better part of a day to root the a101 rom... seems all the latest stock Acer roms (read a501) aren't rooting unless you can install something custom.
donaldson said:
The a101 rom was 3.2.1. When I checked in build.prop, the release date was October 11.
No obvious 3g stuff in Wireless networks except for Tethering.
I tried for the better part of a day to root the a101 rom... seems all the latest stock Acer roms (read a501) aren't rooting unless you can install something custom.
Click to expand...
Click to collapse
I want to try it but not if I can't root and overclock
Sent from Wicced's rooted A100 16gb HoneyComb 3.2 using XDA PREMIUM
excuse me guys..... I've a serious problem with my a100. After a bad recovery tool installation the tablet doesn't start anymore. I've tried recovery console without results. Now I've installed the upgrade utility from recovery but it need the cpu id of my device.... where's this number?????
Related
Came across a handy app that I think will come in handy. Its on the market and its called Quickboot
Sent from Wicced's rooted A100 16gb HoneyComb 3.2 using XDA PREMIUM
Thanks for pointing out a useful tool, wicced.
I tried the reboot function, it works fine. But when I tried the Recovery function, it just shows a picture of the Android guy with an exclamation point on his chest. What's that about?
jschall said:
Thanks for pointing out a useful tool, wicced.
I tried the reboot function, it works fine. But when I tried the Recovery function, it just shows a picture of the Android guy with an exclamation point on his chest. What's that about?
Click to expand...
Click to collapse
That is the ACER recovery. As soon as a custom recovery is created you will be able to use the same tool to boot into the custom version.
I got the same icon too but I did not mess with it so I powered off. I'm guessing it uses the volume up and down keys and I'm hoping someone that knows about recovery can clarify this
Sent from Wicced's rooted A100 16gb HoneyComb 3.2 using XDA PREMIUM
painter_ said:
That is the ACER recovery. As soon as a custom recovery is created you will be able to use the same tool to boot into the custom version.
Click to expand...
Click to collapse
Thanks for the quick responce and I'm happy I did not mess with it
Sent from Wicced's rooted A100 16gb HoneyComb 3.2 using XDA PREMIUM
painter_ said:
That is the ACER recovery. As soon as a custom recovery is created you will be able to use the same tool to boot into the custom version.
Click to expand...
Click to collapse
OK, but what does it do? How does one recover a borked A100 from that screen? It doesn't respond to screen clicks.
jschall said:
OK, but what does it do? How does one recover a borked A100 from that screen? It doesn't respond to screen clicks.
Click to expand...
Click to collapse
You don't... Many manufacturers when they supply an update to the OS they "may" provide it in the form of an update.zip file. this file would be placed in the root of the SDcard and the system rebooted into this recovery. The recovery will look for the update.zip and apply it.
What I hope will happen is the Clockworkmod or another recovery is ported to the tablet that will allow us to create our own "update.zip" file (ROM). This way we can backup the system, install roms, etc...
So right now the built in recovery is useless to us users.
Here is the completely stock ROM image for the GSM Galaxy Nexus, version ITL41F. It is not rooted, if you wish to root after installing use my Superboot. System and boot images are included, recovery and baseband are not. The baseband version for ITL41F is the same (XXKK1) as ITL41D, which is posted in this topic if required.
I know this will be useful to anyone wishing to revert their phone to get a future OTA, to chefs wanting to base a ROM on it etc. etc., so here it is.
To install, flash this update zip via ClockworkMod.
Enjoy!
DOWNLOAD - MD5: da1a2c364d316f734f5bd75e7a2f7e32
P
hi paul,
i presume this is not the official ITL41F from google, but the one you have cooked yourseld?
qwerp_ said:
hi paul,
i presume this is not the official ITL41F from google, but the one you have cooked yourseld?
Click to expand...
Click to collapse
It's official Samsung firmware.
Thanks for the ROM - this will be useful for many I'm sure
Can I just ask - is there a reason the recovery image isn't included? It seems from recent threads that this is often requested in order to flash completely back to stock, but no-one seems to have one available. I was just wondering if it there was a specific reason why people haven't been posting it?
Cheers
Think I'll have a play about with this in my kitchen - get some practice in for when I get my GN
Shodney said:
Thanks for the ROM - this will be useful for many I'm sure
Can I just ask - is there a reason the recovery image isn't included? It seems from recent threads that this is often requested in order to flash completely back to stock, but no-one seems to have one available. I was just wondering if it there was a specific reason why people haven't been posting it?
Cheers
Click to expand...
Click to collapse
You can't flash the recovery image as your using CWM to flash it
You'll need fastboot to flash the recovery
Evostance said:
You can't flash the recovery image as your using CWM to flash it
You'll need fastboot to flash the recovery
Click to expand...
Click to collapse
Oooh. I can see how that would be a problem
Bit of an issue, the dsixda kitchen won't deodex the ROM. Any suggestions?
EDIT: Ignore me, should've actually checked to see if dsixda had returned to update his kitchen - which he has!
Is this the one with the permanent volume bugfix?
Annie the Eagle said:
Is this the one with the permanent volume bugfix?
Click to expand...
Click to collapse
Yes it is....
solved my own problem
Shodney said:
Thanks for the ROM - this will be useful for many I'm sure
Can I just ask - is there a reason the recovery image isn't included? It seems from recent threads that this is often requested in order to flash completely back to stock, but no-one seems to have one available. I was just wondering if it there was a specific reason why people haven't been posting it?
Cheers
Click to expand...
Click to collapse
install the rom then lock bootloader then recovery should revert back to stock,it worked on the nexus s so i think it should work the same on this i hope lol
http://groups.google.com/group/android-building/browse_thread/thread/2dde45a058a737b9#
Google Official build.
EDIT
Sorry that build is only 4.0.1 (ITL41D)
Sent from my Galaxy Nexus using XDA App
siedkins said:
http://groups.google.com/group/android-building/browse_thread/thread/2dde45a058a737b9#
Google Official build.
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
its a tar file how to use it
siedkins said:
http://groups.google.com/group/android-building/browse_thread/thread/2dde45a058a737b9#
Google Official build.
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
It's also not the volume fix build, which is a shame
Sent from my HTC Sensation Z710e using xda premium
EddyOS said:
It's also not the volume fix build, which is a shame
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Yes apologies - I reedited my post when I saw that also.
Sorry for cross posting on this thread. Hopefully they will release the new updated version soon.
Although it probably worth a look as it has an autoscript to restore your phone to stock by flashing multiple files.
If your phone is rooted and have CWM, Superuser and Adfree installed and you flash this what exactly happens?
Does it uninstall CWM? if not how do you access it?
Stret
Stretlow said:
If your phone is rooted and have CWM, Superuser and Adfree installed and you flash this what exactly happens?
Does it uninstall CWM? if not how do you access it?
Stret
Click to expand...
Click to collapse
I need an answer as well.
is it just me but does cw recovery prevent you from installing ota updates?
I keep getting the alert from Google to update but get the sad hospitalised Droid when trying to install.
If I flash the stock rom but still have cw recovery and root the phone, will the ota updates work?
Ez
Sent from my Galaxy Nexus using Tapatalk
Stretlow said:
If your phone is rooted and have CWM, Superuser and Adfree installed and you flash this what exactly happens?
Does it uninstall CWM? if not how do you access it?
Stret
Click to expand...
Click to collapse
As far as i know this not touching your recovery.You must lock the bootloader in order to have stock recovery.You must root it again and install rom manager to access it through UI enviroment.I dont know for sure how you can access it with button combination (i think middle volume and power button)
طوني تبولة said:
I need an answer as well.
Click to expand...
Click to collapse
Check my answer
djcr33p said:
is it just me but does cw recovery prevent you from installing ota updates?
I keep getting the alert from Google to update but get the sad hospitalised Droid when trying to install.
If I flash the stock rom but still have cw recovery and root the phone, will the ota updates work?
Ez
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I think your problem is cwm recovery and not the root.You must lock the bootloader in order to have stock recovery.After that the update can installed succesfully
ps: not an expert.From what i read and tried
Delete this thread please!
2 Qns
1. Can you mount /data (during backup)
2. Can you boot into it using vol+ + home + power
If not then Galaxy 5's port works too..
I think you have posted in the wrong section.
Sent from my Nexus S using xda premium
bump.
this confirmed to work yet?
it is i think, there is a blog about it with screenshots but some says it soft bricked their phone. i'm currently waiting for a clear and safe one to come and i wish it very very soon.
---------- Post added at 04:01 AM ---------- Previous post was at 04:00 AM ----------
noobwithgalaxyy said:
2 Qns
1. Can you mount /data (during backup)
2. Can you boot into it using vol+ + home + power
If not then Galaxy 5's port works too..
Click to expand...
Click to collapse
yes you can, but it may cause some conflicts. haven't tried it though,
yes you can, but it may cause some conflicts. haven't tried it though,
Click to expand...
Click to collapse
Checked.. can't :|
dont try this. there is a great chance that you will soft/hard bricked your phone. let's just wait for mr.Skin1980's stable cwm port for our phone.
cwm 7 for galaxy y
I think all samsung galaxy series get cwm 7 but galaxy y was getting it
i think if cwm 7 port on galaxy y it can upgrade into 2.3.7
adnanahmad1786 said:
I think all samsung galaxy series get cwm 7 but galaxy y was getting it
i think if cwm 7 port on galaxy y it can upgrade into 2.3.7
Click to expand...
Click to collapse
Cwm7???
I am running cwm4 (I have galaxy fit)...and up till now only cwm5 and cwm4 is available for my device!!!
Maybe you are talking about cm7 (cyanogenmod7)...that is a rom, cwm is a recovery...
Even my device doesn't have official cm on it (there are only unofficial ones)...
So you will have to be patient
2.3.7 was for nexus.
i have a better solution... there's a .zip from the skin1980 thread. each time you need clockwork, just go in recovery mode and apply the zip, it will boot the CWM
sireangelus said:
i have a better solution... there's a .zip from the skin1980 thread. each time you need clockwork, just go in recovery mode and apply the zip, it will boot the CWM
Click to expand...
Click to collapse
this is the best solution so far!!!
need someone dev to porting cyanogen to galaxy y
termagazis said:
this is the best solution so far!!!
Click to expand...
Click to collapse
1. Im running on 2.3.6 build dxkl2. skin1980 CWM starts backup , but fails on mount/data and backup stops. Tried also thru Rom Manager same failure. Any solution.
2. Also i have a one package rom S5360JPKK2_S5360OJPKK1_S5360XXKK7_HOME.tar.md5
Arabia fonts version, copied while updating by kies , any ideas to put it back.
mustang4372 said:
1. Im running on 2.3.6 build dxkl2. skin1980 CWM starts backup , but fails on mount/data and backup stops. Tried also thru Rom Manager same failure. Any solution.
2. Also i have a one package rom S5360JPKK2_S5360OJPKK1_S5360XXKK7_HOME.tar.md5
Arabia fonts version, copied while updating by kies , any ideas to put it back.
Click to expand...
Click to collapse
1.backup-restore works fine for me on skin1980's recovery i dont know why this happen to you...
2.our device dont suport one package firmware flashing!our big problem!
mustang4372 said:
1. Im running on 2.3.6 build dxkl2. skin1980 CWM starts backup , but fails on mount/data and backup stops. Tried also thru Rom Manager same failure. Any solution.
2. Also i have a one package rom S5360JPKK2_S5360OJPKK1_S5360XXKK7_HOME.tar.md5
Arabia fonts version, copied while updating by kies , any ideas to put it back.
Click to expand...
Click to collapse
+1 doesn't work for me too. running on 2.3.6 dxkl2
is not working i thought is was but it isn't
i hope a mod will close this thread
/close
The zip that skin posted is working for me, its the best that we have yet.
i was saying about the method that i write on the first post
thx alot ...
I know exactly what I did wrong. I tried unlocking the bootloader before I updated to ICS.
Now it's stuck at the green acer logo and doesn't seem to make any connections with the computer.
This is what happens when I try to get into recovery.
Erasing cache before SD update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
Any help would be appreciated
KANGED AOKP Showcase
Virtuous Prime ATP
JustinFields95 said:
I know exactly what I did wrong. I tried unlocking the bootloader before I updated to ICS.
Now it's stuck at the green acer logo and doesn't seem to make any connections with the computer.
Any help would be appreciated
KANGED AOKP Showcase
Virtuous Prime ATP
Click to expand...
Click to collapse
hmm...did you try to see if you could put an "update.zip" on your external and flash a stock rom?
edit...
look here
http://forum.xda-developers.com/showthread.php?t=1575345
cheeb said:
hmm...did you try to see if you could put an "update.zip" on your external and flash a stock rom?
edit...
look here
http://forum.xda-developers.com/showthread.php?t=1575345
Click to expand...
Click to collapse
Yeah I've read through that. But he doesn't explain how he got fastboot to work. No matter what i try it refuses to make a connection to the computer.
And yes i have done the update.zip several times with different ROMS and of course the Stock ones. it always ends up saying
Erasing cache before SD update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
and then just hangs.
Updated OP with what is going on with the recovery.
KANGED AOKP Showcase
Virtuous Prime ATP
Drivers
Verify you have the drivers for the A100 installed on your pc. Be sure to get the official ones from the Acer website... Windows acts like it may download and install the correct drivers but they dont work.
http://support.acer.com/product/default.aspx?modelId=3849
I've already done that too. When I connect it to the computer it doesn't even make the windows connected sound.
KANGED AOKP Showcase
Virtuous Prime ATP
I can get into APX mode but I can't get my CPU ID D: so i can't restore
JustinFields95 said:
I can get into APX mode but I can't get my CPU ID D: so i can't restore
Click to expand...
Click to collapse
if u were on ics...the euu wont work.. we need a newer version of euu...
Sent from my A100 using xda premium
ptesmoke said:
if u were on ics...the euu wont work.. we need a newer version of euu...
Sent from my A100 using xda premium
Click to expand...
Click to collapse
I was on honeycomb
Sent from my EPAD using XDA Premium HD app
JustinFields95 said:
I can get into APX mode but I can't get my CPU ID D: so i can't restore
Click to expand...
Click to collapse
my a100 is hc 3.2.1 i tried Euus. but i need cpuid... ive searched every forum... but no one seems to know how... i tried every tip there is.. flashing roms.. stock roms.. tried to another sdcard.. reformatting my sdcard to fat32... the only method that detected my tab was EUUS.. but the cpuid.. where the heck is it?
JJBT said:
my a100 is hc 3.2.1 i tried Euus. but i need cpuid... ive searched every forum... but no one seems to know how... i tried every tip there is.. flashing roms.. stock roms.. tried to another sdcard.. reformatting my sdcard to fat32... the only method that detected my tab was EUUS.. but the cpuid.. where the heck is it?
Click to expand...
Click to collapse
That's exactly what I'm trying to find out....
Sent from my SCH-I500 using XDA Premium HD app
Any answers?
Has anyone figured this out? My friend bricked my tab the same way trying to unlock the bootloader on 3.2.1. Now its in APX mode. I already used abd to get the cpu id, but when I put it in, it says its the wrong one.
cooki3monst3r77 said:
Has anyone figured this out? My friend bricked my tab the same way trying to unlock the bootloader on 3.2.1. Now its in APX mode. I already used abd to get the cpu id, but when I put it in, it says its the wrong one.
Click to expand...
Click to collapse
How did you get adb to work?
Sent from my Transformer Prime TF201 using XDA Premium HD app
ADB
I adb'd it before it was flashed with the ICS bootloader so I could EUU it to stock if something happened....turns out the EUU doesnt work with the Acer A100. Thanks Acer for such a quality Dev team!
euus.. acer why why why
cooki3monst3r77 said:
I adb'd it before it was flashed with the ICS bootloader so I could EUU it to stock if something happened....turns out the EUU doesnt work with the Acer A100. Thanks Acer for such a quality Dev team!
Click to expand...
Click to collapse
is there no euus for a100 that works??
JJBT said:
is there no euus for a100 that works??
Click to expand...
Click to collapse
I don't think so.
Sent from my Transformer Prime TF201 using XDA Premium HD app
How to unbrick A101 when unlocking bootloader?????
JustinFields95 said:
I know exactly what I did wrong. I tried unlocking the bootloader before I updated to ICS.
Now it's stuck at the green acer logo and doesn't seem to make any connections with the computer.
This is what happens when I try to get into recovery.
Erasing cache before SD update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
Any help would be appreciated
KANGED AOKP Showcase
Virtuous Prime ATP
Click to expand...
Click to collapse
@JustinFields95: I met the problem like you when unlock bootloader in HC (before updating to ICS). Now my A101 is stuck on Acer green logo and I can not do nothing. Have you unbricked your A101 tab? Do you have any solutions for this case?
Thank you very much
namdtvt said:
@JustinFields95: I met the problem like you when unlock bootloader in HC (before updating to ICS). Now my A101 is stuck on Acer green logo and I can not do nothing. Have you unbricked your A101 tab? Do you have any solutions for this case?
Thank you very much
Click to expand...
Click to collapse
I sent it in to Acer and they repaired it.
Sent from my Transformer Prime TF201 using XDA Premium HD app
So, I have tried time and time again, and am still no closer to getting my phone rooted. I have spent hours reading all over these forums, and Google in general, and have yet to get a straight answer to my question as to why my phone refuses to root.
I am thankful for the advice offered, such as trying SuperOneClick that does... well, nothing. [Says my device has no drivers, yet,. Windows sees my phone as an Android device, and the program generally locks up after]. Was told that my image is faulty, and yet, somehow it's still installed on the device/working fine. [Was suggested to re-download the CW MOD image, and re-install] And it just goes on and on... then silence from the community.
So, to boil it down to the nitty-gritty, the only thing I am getting is, while I -attempt- to install SuperUser via CW, I get this:
E:failed to verify whole-file signature
E:signature verification failed!
So, please, someone, assist me in getting my phone rooted!
-Haz
Really not that bard should take 5 minutes TOPS seeing as u have all the files u need.
Sent from my SGH-I927 using xda app-developers app
phatryan69 said:
Really not that bard should take 5 minutes TOPS seeing as u have all the files u need.
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
So, I can by-pass the halt? The phone won't install SuperUser. o.o
-Haz
try installing superSU...
Now, super one click ... don't use it, it isn't for our roms.
you should be using Odin to flash CW, and then downloading roms and flashing with CW
If you want support from the community, why not offer more information...
What are you running now ? UCLH ? UCLJ ? Jellybean, Gingerbread, ICS ? How did you obtain the version that is running on your phone now ?
i've discovered the only way to root Gingerbread is to download a pre-rooted rom.
ICS, install CW w/ Odin and then flash supersu or superuser .... There was, at a time, I couldn't get ICS to root and had to download a specific SU or SuperSU not on google store that I found by searching the forums ....
Give us more info, as much and as detailed as possible and we can help you further.
yohan4ws said:
try installing superSU...
Now, super one click ... don't use it, it isn't for our roms.
you should be using Odin to flash CW, and then downloading roms and flashing with CW
If you want support from the community, why not offer more information...
What are you running now ? UCLH ? UCLJ ? Jellybean, Gingerbread, ICS ? How did you obtain the version that is running on your phone now ?
i've discovered the only way to root Gingerbread is to download a pre-rooted rom.
ICS, install CW w/ Odin and then flash supersu or superuser .... There was, at a time, I couldn't get ICS to root and had to download a specific SU or SuperSU not on google store that I found by searching the forums ....
Give us more info, as much and as detailed as possible and we can help you further.
Click to expand...
Click to collapse
I used the official update from Samsung when it was fully released... finally. So, running 4.0.4.
What's SuperSU? Is that different?
For more details, I posted already to the fourms here before they went silent:
http://forum.xda-developers.com/showthread.php?p=35750419 and http://forum.xda-developers.com/showthread.php?p=35811065
As you can see, I tried everything, it's like my phone's being annoying... is it do-able to just re-set the phone to stock Gingerbread, and then just update using another ROM? And, if so, what one do I use? I just want a stable experience. Like, with the leak that came out not too long before the official, there was the keyboard error, and I even had issues with placing and receiving calls...
At this point, it's getting to the point where I am willing to basicly go back to out-of-the-box, then root the sucker, if I can do that. Seems perhaps a clean slate is in order, anywho.
Thanks for the quick reply, though.
-Haz
U need to install CWM b4 u do anything cause its just so simple. Then u flash watever u want....
Sent from my SGH-I927 using xda app-developers app
phatryan69 said:
U need to install CWM b4 u do anything cause its just so simple. Then u flash watever u want....
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
I thought I already had that on there, I'm confused. I did what the guide specified hosted here on the forums, but, I still get stuck at the signature verification thingy.
Am I missing something?
-haz
Sounds like a bad download...
Sent from my SGH-I927 using xda app-developers app
phatryan69 said:
Sounds like a bad download...
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
Tried that as well, unless like, all 10 attempts were bad.
Any other ideas?
-Haz
so why do u just want super user installed?
Sent from my SGH-I927 using xda app-developers app
Why not just install clockwork recovery and flash dmans stock rooted ROM? Since its comes per rooted for you?
Sent from my SGH-i927 using xda premium
Hazarath said:
I used the official update from Samsung when it was fully released... finally. So, running 4.0.4.
At this point, it's getting to the point where I am willing to basicly go back to out-of-the-box, then root the sucker, if I can do that. Seems perhaps a clean slate is in order, anywho.
Thanks for the quick reply, though.
-Haz
Click to expand...
Click to collapse
#1 what version of Odin are you using?
#2 What version of CWM are you using? Where did you download it from ? (Here I hope : http://forum.xda-developers.com/showthread.php?t=2007198 )
#3 Where did you get SuperSU from?
#4 Are you downloading it with your phone's browser, or are you downloading it to a computer and transferring via USB ? (It's possible you have a bad flash card/RAM in the computer/physical hard drive in computer).
Do NOT use Superoneclick, there is no SOC that will work for our phone.
It has been some time since I have used ICS. I had completed the stock download from samfirmware.com, installed CWM 6 with Odin 1.85 and (taadaa) attached to this thread the same version of Superuser I used to install via CWM.
I stumbled on this randomly.. no usb hubs i guess..
Are you using a USB that is a direct connection to the motherboard? usually that can cause issues, if your not on a connection to the motherboard it won't work..
Click to expand...
Click to collapse
#1 what version of Odin are you using?
Click to expand...
Click to collapse
3.04, as linked in the guide.
#2 What version of CWM are you using? Where did you download it from ? (Here I hope : http://forum.xda-developers.com/showthread.php?t=2007198 )
Click to expand...
Click to collapse
Exactly from there. Same version.
#3 Where did you get SuperSU from?
Click to expand...
Click to collapse
The guide's link, and from their website.
#4 Are you downloading it with your phone's browser, or are you downloading it to a computer and transferring via USB ? (It's possible you have a bad flash card/RAM in the computer/physical hard drive in computer).
Click to expand...
Click to collapse
From my computer, via USB, and not likely at all. Every component is new, and to make it more amusing, I did all this in the past with the leaked ROM before I got this new system on my last compy, so, yeah... if -both- computers does the -exact- same thing... prolly time to format the phone, and try again, somehow?
Do NOT use Superoneclick, there is no SOC that will work for our phone.
Click to expand...
Click to collapse
Guess that's one reason why it doesn't work at all.
It has been some time since I have used ICS. I had completed the stock download from samfirmware.com, installed CWM 6 with Odin 1.85 and (taadaa) attached to this thread the same version of Superuser I used to install via CWM.
Click to expand...
Click to collapse
And I thank you, however, that, again, is the same link as before, and, thusly, gives the same error.
Thanks for the reply... think it's time to just tell the phone to start all over, try again?
-Haz
yohan4ws said:
I stumbled on this randomly.. no usb hubs i guess..
Click to expand...
Click to collapse
Nah, just a data transfer connection hooked into the hub on the -back- of my computer.
-Haz
..okes.. I feel like somewhat of an idiot. I decided to just try one last time to get the recovery mod in there again, and, for whatever stupid reason, instead of seeing a blank background with the Android, I saw the CW icon, and a silver icon... I told it to apply SuperUser as I have tried so many other times, and it just... worked.
The closest thing I can figure is that my browser, and my eyes told me that I had multiple copies of the current CW Mod, but, in my working directory, I unzipped the -old- version.
To make it simple; I -now- have root on my Glide, woot!
*runs to un-install all the bloat ware*
-Haz
I didn't realize that CW hadn't installed properly for you ... good to know it's working for you now! ..