So, I have tried time and time again, and am still no closer to getting my phone rooted. I have spent hours reading all over these forums, and Google in general, and have yet to get a straight answer to my question as to why my phone refuses to root.
I am thankful for the advice offered, such as trying SuperOneClick that does... well, nothing. [Says my device has no drivers, yet,. Windows sees my phone as an Android device, and the program generally locks up after]. Was told that my image is faulty, and yet, somehow it's still installed on the device/working fine. [Was suggested to re-download the CW MOD image, and re-install] And it just goes on and on... then silence from the community.
So, to boil it down to the nitty-gritty, the only thing I am getting is, while I -attempt- to install SuperUser via CW, I get this:
E:failed to verify whole-file signature
E:signature verification failed!
So, please, someone, assist me in getting my phone rooted!
-Haz
Really not that bard should take 5 minutes TOPS seeing as u have all the files u need.
Sent from my SGH-I927 using xda app-developers app
phatryan69 said:
Really not that bard should take 5 minutes TOPS seeing as u have all the files u need.
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
So, I can by-pass the halt? The phone won't install SuperUser. o.o
-Haz
try installing superSU...
Now, super one click ... don't use it, it isn't for our roms.
you should be using Odin to flash CW, and then downloading roms and flashing with CW
If you want support from the community, why not offer more information...
What are you running now ? UCLH ? UCLJ ? Jellybean, Gingerbread, ICS ? How did you obtain the version that is running on your phone now ?
i've discovered the only way to root Gingerbread is to download a pre-rooted rom.
ICS, install CW w/ Odin and then flash supersu or superuser .... There was, at a time, I couldn't get ICS to root and had to download a specific SU or SuperSU not on google store that I found by searching the forums ....
Give us more info, as much and as detailed as possible and we can help you further.
yohan4ws said:
try installing superSU...
Now, super one click ... don't use it, it isn't for our roms.
you should be using Odin to flash CW, and then downloading roms and flashing with CW
If you want support from the community, why not offer more information...
What are you running now ? UCLH ? UCLJ ? Jellybean, Gingerbread, ICS ? How did you obtain the version that is running on your phone now ?
i've discovered the only way to root Gingerbread is to download a pre-rooted rom.
ICS, install CW w/ Odin and then flash supersu or superuser .... There was, at a time, I couldn't get ICS to root and had to download a specific SU or SuperSU not on google store that I found by searching the forums ....
Give us more info, as much and as detailed as possible and we can help you further.
Click to expand...
Click to collapse
I used the official update from Samsung when it was fully released... finally. So, running 4.0.4.
What's SuperSU? Is that different?
For more details, I posted already to the fourms here before they went silent:
http://forum.xda-developers.com/showthread.php?p=35750419 and http://forum.xda-developers.com/showthread.php?p=35811065
As you can see, I tried everything, it's like my phone's being annoying... is it do-able to just re-set the phone to stock Gingerbread, and then just update using another ROM? And, if so, what one do I use? I just want a stable experience. Like, with the leak that came out not too long before the official, there was the keyboard error, and I even had issues with placing and receiving calls...
At this point, it's getting to the point where I am willing to basicly go back to out-of-the-box, then root the sucker, if I can do that. Seems perhaps a clean slate is in order, anywho.
Thanks for the quick reply, though.
-Haz
U need to install CWM b4 u do anything cause its just so simple. Then u flash watever u want....
Sent from my SGH-I927 using xda app-developers app
phatryan69 said:
U need to install CWM b4 u do anything cause its just so simple. Then u flash watever u want....
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
I thought I already had that on there, I'm confused. I did what the guide specified hosted here on the forums, but, I still get stuck at the signature verification thingy.
Am I missing something?
-haz
Sounds like a bad download...
Sent from my SGH-I927 using xda app-developers app
phatryan69 said:
Sounds like a bad download...
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
Tried that as well, unless like, all 10 attempts were bad.
Any other ideas?
-Haz
so why do u just want super user installed?
Sent from my SGH-I927 using xda app-developers app
Why not just install clockwork recovery and flash dmans stock rooted ROM? Since its comes per rooted for you?
Sent from my SGH-i927 using xda premium
Hazarath said:
I used the official update from Samsung when it was fully released... finally. So, running 4.0.4.
At this point, it's getting to the point where I am willing to basicly go back to out-of-the-box, then root the sucker, if I can do that. Seems perhaps a clean slate is in order, anywho.
Thanks for the quick reply, though.
-Haz
Click to expand...
Click to collapse
#1 what version of Odin are you using?
#2 What version of CWM are you using? Where did you download it from ? (Here I hope : http://forum.xda-developers.com/showthread.php?t=2007198 )
#3 Where did you get SuperSU from?
#4 Are you downloading it with your phone's browser, or are you downloading it to a computer and transferring via USB ? (It's possible you have a bad flash card/RAM in the computer/physical hard drive in computer).
Do NOT use Superoneclick, there is no SOC that will work for our phone.
It has been some time since I have used ICS. I had completed the stock download from samfirmware.com, installed CWM 6 with Odin 1.85 and (taadaa) attached to this thread the same version of Superuser I used to install via CWM.
I stumbled on this randomly.. no usb hubs i guess..
Are you using a USB that is a direct connection to the motherboard? usually that can cause issues, if your not on a connection to the motherboard it won't work..
Click to expand...
Click to collapse
#1 what version of Odin are you using?
Click to expand...
Click to collapse
3.04, as linked in the guide.
#2 What version of CWM are you using? Where did you download it from ? (Here I hope : http://forum.xda-developers.com/showthread.php?t=2007198 )
Click to expand...
Click to collapse
Exactly from there. Same version.
#3 Where did you get SuperSU from?
Click to expand...
Click to collapse
The guide's link, and from their website.
#4 Are you downloading it with your phone's browser, or are you downloading it to a computer and transferring via USB ? (It's possible you have a bad flash card/RAM in the computer/physical hard drive in computer).
Click to expand...
Click to collapse
From my computer, via USB, and not likely at all. Every component is new, and to make it more amusing, I did all this in the past with the leaked ROM before I got this new system on my last compy, so, yeah... if -both- computers does the -exact- same thing... prolly time to format the phone, and try again, somehow?
Do NOT use Superoneclick, there is no SOC that will work for our phone.
Click to expand...
Click to collapse
Guess that's one reason why it doesn't work at all.
It has been some time since I have used ICS. I had completed the stock download from samfirmware.com, installed CWM 6 with Odin 1.85 and (taadaa) attached to this thread the same version of Superuser I used to install via CWM.
Click to expand...
Click to collapse
And I thank you, however, that, again, is the same link as before, and, thusly, gives the same error.
Thanks for the reply... think it's time to just tell the phone to start all over, try again?
-Haz
yohan4ws said:
I stumbled on this randomly.. no usb hubs i guess..
Click to expand...
Click to collapse
Nah, just a data transfer connection hooked into the hub on the -back- of my computer.
-Haz
..okes.. I feel like somewhat of an idiot. I decided to just try one last time to get the recovery mod in there again, and, for whatever stupid reason, instead of seeing a blank background with the Android, I saw the CW icon, and a silver icon... I told it to apply SuperUser as I have tried so many other times, and it just... worked.
The closest thing I can figure is that my browser, and my eyes told me that I had multiple copies of the current CW Mod, but, in my working directory, I unzipped the -old- version.
To make it simple; I -now- have root on my Glide, woot!
*runs to un-install all the bloat ware*
-Haz
I didn't realize that CW hadn't installed properly for you ... good to know it's working for you now! ..
Related
when flashing the build for cm7 could i do it using ClockWork Mod v2.5.1.2 or is there a special recovery i need to flash before trying to put cm7
reason i ask is because on the MT4G you need to flash recovery to v3.0.0.0+ before flashing cm7 build
if someone could please responf on this thread or pm me would be awesome!
Thank You
pretty sure you can just flash it the regular way.. wouldn't see why not as the gingerbread roms are flashed through the regular cwm also
bomber889 said:
pretty sure you can just flash it the regular way.. wouldn't see why not as the gingerbread roms are flashed through the regular cwm also
Click to expand...
Click to collapse
my next question, i tried rooting the phone using the unrevoked program but after it tries running the root it come with an error
"ERROR:Failed to get root. Is your Firmware too new?"
does anyone know anything about this?
Jlom117 said:
my next question, i tried rooting the phone using the unrevoked program but after it tries running the root it come with an error
"ERROR:Failed to get root. Is your Firmware too new?"
does anyone know anything about this?
Click to expand...
Click to collapse
well sounds like you already have the latest Clockwork installed? if so, I believe UnRevoked comes with a downgraded version so I would try and downgrade the version on your phone see if it helps
Well I'm able to go into recovery it's just when I try and use rom manager or titanium backup it comes up saying the phone doesn't have root privileges so I thought it wasnt rooted properly. If I'm rooted because I can go into recovery and it shows s= off in h boot then how do I fix the privileges part of it all?
Sent from my HTC Glacier using XDA App
Jlom117 said:
Well I'm able to go into recovery it's just when I try and use rom manager or titanium backup it comes up saying the phone doesn't have root privileges so I thought it wasnt rooted properly. If I'm rooted because I can go into recovery and it shows s= off in h boot then how do I fix the privileges part of it all?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
This happened to me after I used unrevoked. It ran successfully, I tested w/ rom manager and it worked. I then rebooted a few minutes later and tried using several other root apps and none could obtain root privelages. So, I flashed a custom ROM (cyanogen 6.1) then had full root access again. Maybe that will help?
pokedroid said:
This happened to me after I used unrevoked. It ran successfully, I tested w/ rom manager and it worked. I then rebooted a few minutes later and tried using several other root apps and none could obtain root privelages. So, I flashed a custom ROM (cyanogen 6.1) then had full root access again. Maybe that will help?
Click to expand...
Click to collapse
ok cool ill try that! THANKS!
sounds like superuser isn't installed or you aren't letting it have privileges
Sent from my ADR6300 using XDA App
pete_kowalski83 said:
sounds like superuser isn't installed or you aren't letting it have privileges
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
ok everything went through for the root and privileges, now im having an issue flashing cm7..... is there something special i need to do to flash it?
when i try flashing through recovery using 2.5.1.2 it aborts the installation please help, ive been trying to this for my gf for the passed 2 days.
Thanks
EDIT: still same issue, what do I do to fix?
This is like my 10th android phone however with trying to root this i noticed some techniques have a built in image file or whatever that won't let you install roms? I want to be able to install roms, is there a good one click root option for me? Also what would be the best kernel?
why do you actually have 60 posts? Were the other 59 in the development section as well?
Hhhmmm.......
Sent from "The EVO"
Everything you need is right here:
http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic&useskin=vector
joehunni said:
why do you actually have 60 posts? Were the other 59 in the development section as well?
Click to expand...
Click to collapse
Was that a douchebag comment orrrrr are you actually asking? I don't use xda as much as i did droidxforums, androidforums, androidcentral, and droidforums...
lets not bicker about posts, and just get along.. simple question, quick answer......
1. Unrevoked
2. No one can tell you what will be a good kernel for your phone
3. Wrong section
They're all good kernels. Some just work better with some phones. It really depends on the phone.
Sent from my PC36100 using XDA App
Nickdroid86 said:
This is like my 10th android phone however with trying to root this i noticed some techniques have a built in image file or whatever that won't let you install roms? I want to be able to install roms, is there a good one click root option for me? Also what would be the best kernel?
Click to expand...
Click to collapse
I found its trial and error with different roms also like three previous poster stated depends on phone. Kernels are easy to flash. Just give em a couple days to settle in. its like getting a new puppy. At first it may not look like its going to work out. After a couple days and conditioning things are better lol. Good luck and enjoy your evo! I do!
Sent from my PC36100 using XDA App
Q&A Section I believe would be a good place to start, dont you?
I use unrevoked getting failed but s now off without su..
then trying z4root and succes. I dont know how. I never see this method before. But it works for me..
Sent from my PC36100 using XDA Premium App
snxxxxx said:
I use unrevoked getting failed but s now off without su..
then trying z4root and succes. I dont know how. I never see this method before. But it works for me..
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Well you'll need to run unrevoked again because z4root only gives you temporary root, and goes away once the phone is rebooted, meaning you'll have to run it again.
teh roxxorz said:
Well you'll need to run unrevoked again because z4root only gives you temporary root, and goes away once the phone is rebooted, meaning you'll have to run it again.
Click to expand...
Click to collapse
No my phone is still rooted. Now i use warm rls5, flash kernel, theme,and other and it still rooted.. like before id said. I dont know how it happen. I know in forum or other website that z4root just for temporary root for evo. But now my evo about 1 month being rooted by it with many flashing.
Sent from my PC36100 using XDA Premium App
Awkward...well if it unroots for any reason, or something happens, that's the course of action you should take.
teh roxxorz said:
Awkward...well if it unroots for any reason, or something happens, that's the course of action you should take.
Click to expand...
Click to collapse
you really made me afraid. I really do not know why this could occur. you think what do I do now? I use the latest version unrevoked before and always failed. at least I tried 4 times. and when I use z4root, my evo be like now. all working with normal functions. superuser always work properly.
Sent from my PC36100 using XDA Premium App
snxxxxx said:
you really made me afraid. I really do not know why this could occur. you think what do I do now? I use the latest version unrevoked before and always failed. at least I tried 4 times. and when I use z4root, my evo be like now. all working with normal functions. superuser always work properly.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Not trying to scare you, just saying from what I heard, you lose root after rebooting after z4root, unless the unrevoked did work. But if its all good, no need to go messing with it.
Nickdroid86 said:
This is like my 10th android phone however with trying to root this i noticed some techniques have a built in image file or whatever that won't let you install roms? I want to be able to install roms, is there a good one click root option for me? Also what would be the best kernel?
Click to expand...
Click to collapse
ok if you just got the phone you probably have the newest hboot. I got my phone in december and i had the newest one at the time. (i dont know if its been updated). i wasnt able to use unrevoked, but maybe that has changed since. If you cant use unrevoked, then there should be a sticky on one of the categories, ( i think android development) that will tell you how to root your phone using SDK, abd, and your PC ( thats the way i did it).
As for kernels, like everyone has been saying, it really depends on how the device accepts the kernel, but I am currently using netarchy toastmod 4.3.1 cfs no havs sbc more universal. I would try using the netarchy toastmods, they seem to treat me the best. Download a few and then give them a try. For hardware version 004, dont use BFS... they will cause reboots constantly...
Enjoy your new phone and welcome to the family.
here is the kernels page i use...
http://www.qap.la/~netarchy/
Try this page for rooting...
http://forum.ppcgeeks.com/htc-evo-4g/123714-everything-evo-rooting-nand-flashing-roms-wipe.html
Nickdroid86 said:
This is like my 10th android phone however with trying to root this i noticed some techniques have a built in image file or whatever that won't let you install roms? I want to be able to install roms, is there a good one click root option for me? Also what would be the best kernel?
Click to expand...
Click to collapse
I believe this is what you're looking for: http://forum.xda-developers.com/showthread.php?t=838448
Just plug your phone into your PC and launch the program. The program does all the work until your phone is rooted and nand unlocked. After it's rooted, you can install custom kernel, ROM's, radio's, etc.
http://www.youtube.com/watch?v=GsoVzMadiQE
Hi all,
I've uploaded this root method because it is the only way I have been able to get root on the first try every time.
Your results may vary. If you don't get it first try, just try again.
Here are the methods I have tried and had fail:
UnlockRoot
Doomlord v1
Doomlord v4
TPSparky
SuperOneClick (Any Version)
So here you go! Here is a method that I have had 100% success with. I will be editing the script to try and make it more clean and less work on your part in the future. I will post new versions on this thread when I get them done.
Required Downloads
LG Nitro HD Root.zip
Enabling Root Rights
Enable USB Debugging and Unknown Sources.
Unzip the zip file to the location of your choice.
Run the file named “Root.bat”.
Follow the instructions on in the CMD window.
Notes
Here is a list of the apps that I have found will brick your Nitro if removed:
AT&T Address Book
AT&T Navigator
Google Play Books*
Google Play Movies*
Google Play Music
Google Play Store/Market
removal of at&t addressbook and navigator doesn't brick your device !
i confirm this !
aaki_rocker said:
removal of at&t addressbook and navigator doesn't brick your device !
i confirm this !
Click to expand...
Click to collapse
Thank you for your input. But, I have removed both of them individually and bricked it. Also, several others have reported in other threads that it has. I believe it just depends on how much luck you have.
Just tried... no worky.
Again, I am trying to root on 2.3.5. Zerg fails, SOC wont make it past rebooting adb...
mattman86 said:
Thank you for your input. But, I have removed both of them individually and bricked it. Also, several others have reported in other threads that it has. I believe it just depends on how much luck you have.
Click to expand...
Click to collapse
Matt your instructions for root say to extract from zip, root.bat. But your link takes me to a apk root file not a zip file...
can you be more specific or maybe the link is misdirected?
are you saying this is a root method via apk from phone?
IM starting to remember why I sold my g2x....nothing changes eh LG??
freakboy13 said:
Matt your instructions for root say to extract from zip, root.bat. But your link takes me to a apk root file not a zip file...
can you be more specific or maybe the link is misdirected?
are you saying this is a root method via apk from phone?
IM starting to remember why I sold my g2x....nothing changes eh LG??
Click to expand...
Click to collapse
yes i try this and i fail to download.. the zip file..
zikario507 said:
yes i try this and i fail to download.. the zip file..
Click to expand...
Click to collapse
Hic hic,me too
Sent from my LG-P930 using xda app-developers app
I assumed he meant to download and run on the computer with phone connected through USB. Can you clarify mattman86?
Sent from my LG-P930 using xda app-developers app
AllstarE4 said:
I assumed he meant to download and run on the computer with phone connected through USB. Can you clarify mattman86?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
But as to what? Run the apk on your pc o_0
His directions say dl zip, yet there is no zip it directs you to a page that looks like what may have been in the zip? Still not clear
The apk root ...it shows up on the phone but still unclear.
Need the link fixed or to be clarified please Mattman when you get a chance thank you.
Edit: is the zip you were refering to the lg tool that reverts you to v18f ?
If so will this work on official ics release via lg tool.
Thanks again in advance
Sent from my LG-P930 using Tapatalk 2
Terribly sorry... The privacy settings on my Google Drive must have been reset somehow.
I've fixed it so that the zip should show now.
But it now says that you have binned the file. It works right, doesn't it?
Mattman your script isnt working.
When I hit "any key to continue" it flashes..but its not flashing anything.
Cmd window turns off (checked process not running at all)
nothing happens.
No instructions , nothing. cmd. window just exits.
so guesse thats another brick wall for root on lg updated firmware to ics.
Mattman sorry but this method does not work.
Or I should say it did not work for me.
I even put togewther my own rendition of your files that you compiled still would not work.
In fact I am now convinced the ONLy root method for the nitro running it the one here:
http://forum.xda-developers.com/showthread.php?p=30209937#post30209937
Im not saying anything against your method, it looks solid, but it would not work.
I tried it on v20c and v18f.
I now have root but want to say your efforts and work are appreciated.
I hope this is not considering hijacking the thread I wanted to post this for others with the same issues.
EDIT: Mattman I been searching through the threads and seen that you initialy used this method off of 2.3.6? Meaning you rooted from 2.3.6? ( from the cwm thread you came up with a way via script to run cwm) I am wondering maybe your method only works from 2.3.6? what firmware did you originally root from?
i tried this method on my v20c and my wife is not working.. and never get root??
please help me
zikario507 said:
i tried this method on my v20c and my wife is not working.. and never get root??
please help me
Click to expand...
Click to collapse
V20c is the latest update... Please read the title of the thread.
mattman86 said:
V20c is the latest update... Please read the title of the thread.
Click to expand...
Click to collapse
yes.. i'm agree with you.. nowadays i can root with your eady guide to unbrick the phone
Does this work for anyone who has followed his steps and also 'not' on the latest firmware like Mat mentions, just want to know before I get my phone??
I started doing the Google framework force stop and clear cache today while on wifi and was prompted after 5 or 6 tries. It downloaded, verified download, rebooted and TRIED to install. About 15% through, it said untrusted zip and cwm screen popped up top and asked 'install untrusted zip?' Of course I hit yes.. why isn't it trusted? Its straight from the carrier. Anyway it immediately said installation aborted. I repeated this process again and got the same results. Please someone help. Now that JB is finally here my phone won't take it???
Sent from my Galaxy Nexus using xda app-developers app
Your phone is rooted? If yes you can't install OTA updates
I'm rooted yes. So what do I do? Unroot?
Sent from my Galaxy Nexus using xda app-developers app
htc_woe_is_me said:
I started doing the Google framework force stop and clear cache today while on wifi and was prompted after 5 or 6 tries. It downloaded, verified download, rebooted and TRIED to install. About 15% through, it said untrusted zip and cwm screen popped up top and asked 'install untrusted zip?' Of course I hit yes.. why isn't it trusted? Its straight from the carrier. Anyway it immediately said installation aborted. I repeated this process again and got the same results. Please someone help. Now that JB is finally here my phone won't take it???
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
If you have CWM flashed, you have to manually flash the update -- it won't install over-the-air. If you want to install it over-the-air, flash back the stock recovery then accept the update.
polimeno said:
Your phone is rooted? If yes you can't install OTA updates
Click to expand...
Click to collapse
Not true. Root makes no difference.
efrant said:
If you have CWM flashed, you have to manually flash the update -- it won't install over-the-air. If you want to install it over-the-air, flash back the stock recovery then accept the update.
Not true. Root makes no difference.
Click to expand...
Click to collapse
So either way I will lose all my settings, home screens and what not?
I used Galaxy Nexus Toolkit to do all of my rooting, installing CWM and all-- is there a way to accomplish what I need to on there?
efrant said:
If you have CWM flashed, you have to manually flash the update -- it won't install over-the-air. If you want to install it over-the-air, flash back the stock recovery then accept the update.
Not true. Root makes no difference.
Click to expand...
Click to collapse
It's exact. But root can only be done if you have bootloader unlocked, and with unlocked bootloader can not install OTA updates
htc_woe_is_me said:
So either way I will lose all my settings, home screens and what not?
Click to expand...
Click to collapse
No, updating using an OTA update file will NOT make you lose anything.
htc_woe_is_me said:
I used Galaxy Nexus Toolkit to do all of my rooting, installing CWM and all-- is there a way to accomplish what I need to on there?
Click to expand...
Click to collapse
I can't help you out with the toolkit, but have a look at my signature for some useful links on doing things without a toolkit.
efrant said:
No, updating using an OTA update file will NOT make you lose anything.
I can't help you out with the toolkit, but have a look at my signature for some useful links on doing things without a toolkit.
Click to expand...
Click to collapse
OK, so the best thing would be to flash the stock recovery? Sorry for all the questions, and I really appreciate all your help. I swear I used to know how to do this crap on my Dinc, but it's been years since I did all that.
htc_woe_is_me said:
OK, so the best thing would be to flash the stock recovery? Sorry for all the questions, and I really appreciate all your help. I swear I used to know how to do this crap on my Dinc, but it's been years since I did all that.
Click to expand...
Click to collapse
Go to the Google page with all the images and download the mysid IMM76K image, extract the recovery.img from within, and flash it using fastboot: fastboot flash recovery recovery.img
efrant said:
Go to the Google page with all the images and download the mysid IMM76K image, extract the recovery.img from within, and flash it using fastboot: fastboot flash recovery recovery.img
Click to expand...
Click to collapse
OK, I'm trying this now... I downloaded the images from Google.. extracted its contents... found the recovery image file. Do I need to put that file into a zip file?
htc_woe_is_me said:
OK, I'm trying this now... I downloaded the images from Google.. extracted its contents... found the recovery image file. Do I need to put that file into a zip file?
Click to expand...
Click to collapse
Gnex Toolkit wasn't working because of some missing file... re-installed it and flashed the stock recovery via Gnex Toolkit (I think). Is there a way to check which recovery is running? Anyway, if it is indeed stock, I just got prompted again for the OTA JB update.. it's installing now.... fingers crossed!!!
..OK so now it rebooted... started installing, got about halfway through.. paused, then it went to the stock recovery screen and stayed with a red triangle around an exclamation point! What is happening here?!
I have now re-locked the bootloader and received the prompt for OTA again....
Still won't work for me. I've tried even flashing the stock image and it won't install at all. Actually nothing is installing.
I've never done anything to the phone besides unlocking the BL and rooting and switching to CWM. It seems to have something to do with the SD mount.. nut then again I have no idea.
Where's all the Android gurus at?
Sent from my Galaxy Nexus using xda app-developers app
htc_woe_is_me said:
Still won't work for me. I've tried even flashing the stock image and it won't install at all. Actually nothing is installing.
I've never done anything to the phone besides unlocking the BL and rooting and switching to CWM. It seems to have something to do with the SD mount.. nut then again I have no idea.
Where's all the Android gurus at?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Follow the instructions in the "update" link in my signature.
Sent from my Galaxy Nexus using Tapatalk 2
Guys i am having this EXACT problem, except on a S4 (I337M to be exact)
Here is my thread with the details
http://forums.androidcentral.com/as...t-update-ota-failure-using-triangle-away.html
But basically, im just wondering how i can get stock recovery back and get this ota to work!!!
Thanks!
Every time i install any of the custom rom on my Hong Kong GT-N7105; the screen flickers on the Samsung intro screen and then it goes dark. If I press the buttons a few times it'll finally come on, but it does it every reboot. It also doesn't recognize the SD card and corrupts it. I'll finally get aggravated & go back to stock. What can I do different?
Another question. Why do I have to wipe & reset settings every time before it will reboot on stock after I install it with Odin?
I got an answer 4 u bro. Dont root it again and stop doing it, ok. If u don't know what you doing, then don't do it. It's 4 your own good peace-out
Sent from my GT-N7100 using xda app-developers app
Well, that's about what I decided to do. I don't like stock 4.1.1 looking like Gingerbread. I sure had a lot better luck doing my Note 1 that is when i stayed away from the D2att Roms.
Make sure you are installing a custom rom for the N7105 because the roms for the N7100 don't work on the N7105.
colint3 said:
Make sure you are installing a custom rom for the N7105 because the roms for the N7100 don't work on the N7105.
Click to expand...
Click to collapse
I try to use ones that have t0lte in the file name.
I have the same issue like yours few days ago but i manage to solve it. The problem lies with the root file. May i know what file did you use to root your phone? I use cf-auto-note2 on my N7100 but after changing it to CWM.... it works like charm. Do try it out.
Previously... after root or flash custom rom, my screen flickered. After changing to the right root file.... it is solved 100%
ahkiongkc said:
I have the same issue like yours few days ago but i manage to solve it. The problem lies with the root file. May i know what file did you use to root your phone? I use cf-auto-note2 on my N7100 but after changing it to CWM.... it works like charm. Do try it out.
Previously... after root or flash custom rom, my screen flickered. After changing to the right root file.... it is solved 100%
Click to expand...
Click to collapse
Sorry, I just now saw your response. I use the SuperSU 0.99 root file in the Note 2 Tool kit. There's a Superuser 3.1.3 but it wouldn't install. I'll look for & try the one you suggested. Thanks...
sholsten said:
Sorry, I just now saw your response. I use the SuperSU 0.99 root file in the Note 2 Tool kit. There's a Superuser 3.1.3 but it wouldn't install. I'll look for & try the one you suggested. Thanks...
Click to expand...
Click to collapse
Glad if i really can help. Do let me know the update once flash it. You can take a look at this... http://theunlockr.com/2013/01/15/ho...overy-on-the-samsung-galaxy-note-2-lte-n7105/
ahkiongkc said:
Glad if i really can help. Do let me know the update once flash it. You can take a look at this... http://theunlockr.com/2013/01/15/ho...overy-on-the-samsung-galaxy-note-2-lte-n7105/
Click to expand...
Click to collapse
i just found & ran the CF Auto Root you suggested. It loaded fine, but I tried the Paranoid JB Rom and it still crashed. So, I'm back to square one.
sholsten said:
i just found & ran the CF Auto Root you suggested. It loaded fine, but I tried the Paranoid JB Rom and it still crashed. So, I'm back to square one.
Click to expand...
Click to collapse
Do not use CF Auto Root. I used that before and it crashed too. Look for CWM Recovery.
ahkiongkc said:
Do not use CF Auto Root. I used that before and it crashed too. Look for CWM Recovery.
Click to expand...
Click to collapse
Oh OK. I read your response wrong. I'll try that after I take a Science test. Thanks again.
sholsten said:
i just found & ran the CF Auto Root you suggested. It loaded fine, but I tried the Paranoid JB Rom and it still crashed. So, I'm back to square one.
Click to expand...
Click to collapse
sholsten said:
Oh OK. I read your response wrong. I'll try that after I take a Science test. Thanks again.
Click to expand...
Click to collapse
You are welcome =DD Glad if i can help.
Is the Touch CWM good to use for this?
sholsten said:
Is the Touch CWM good to use for this?
Click to expand...
Click to collapse
You are using Odin to root your phone right?
ahkiongkc said:
You are using Odin to root your phone right?
Click to expand...
Click to collapse
Yes, I use the Toolkit which in turn uses Odin.
sholsten said:
Is the Touch CWM good to use for this?
Click to expand...
Click to collapse
sholsten said:
Yes, I use the Toolkit which in turn uses Odin.
Click to expand...
Click to collapse
I never try the touch based CWM but it should be good to go. Try it and Good Luck =DD
Well, I tried to install the Paranoid JB again and it flickered on the boot again and goes black. I couldn't wake it up til I reinstalled stock again. I may just have to bite the bullet and run stock.