Does wireless charging work on any AOSP ROMs yet, specifically 7.1.0.1?
Sent from my ADR6350 using XDA App
volfman said:
Does wireless charging work on any AOSP ROMs yet, specifically 7.1.0.1?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
Considering the bugs they've experienced as of late, I wouldn't hold MY breath.
My $ .02
Well I just tried it on CM7.1.0.1...
The wireless charger still makes a beep, and the charging light flashes, but the OS does not see that the battery is being charged, and it doesn't actually charge, the battery % just drops.
Any idea if something can be ported over to CM7 so it supports it?
No ideas? Can the wireless charging portion of one of the Sense ROM's be ported to CM7 or another AOSP ROM?
volfman said:
No ideas? Can the wireless charging portion of one of the Sense ROM's be ported to CM7 or another AOSP ROM?
Click to expand...
Click to collapse
If it were that simple, it would be done.
Related
I'm a noob, so feel free to set me straight. I have tried several of the custom roms and while I enjoy certain aspects (speed, UI, themes, etc.), they all have small quirks or seem incomplete. My question is: Is anyone working on a Supersonic based Rom with a Sense 3.0 experience while fully functional (hdmi, camera,)?
Sent from my PC36100 using XDA App
Sent from my PC36100 using XDA App
Yes there are several roms actually Like AllianceROM http://forum.xda-developers.com/showthread.php?t=1120734
some roms are sense 2.1 with 3.0 elements like synergy
http://forum.xda-developers.com/showthread.php?t=1144447
virusrom kingdom
http://forum.xda-developers.com/showthread.php?t=1071547
and mikg http://forum.xda-developers.com/showthread.php?t=1038967
And all are still being supported
All of these roms are fantastic but I prefer synergy then kingdom roms
Battery life might be awful but give it 2 days and the battery life will settle in...
Later there will be custom kernels to increase battery life so much but htc hasnt released their kernel source yet
I've tried them and they have great a great feel. I don't understand why Netflix and Hulu is such a priority w/o working hdmi. Cart before the horse.
Sent from my PC36100 using XDA App
hdmi will come soon. once htc releases the kernel source, somebody will put in HDMwIn mods into the kernel, and you can use the HDMwIn app with it. so that's where hdmi will come from.
same with battery life. havs, smartass, undervolting, and sbc will all come once htc releases the source.
btw: flash synergy. flash the 3.0 carousel rosie in the same recovery session. laugh in the face of danger.
I like Alliance a lot, but I'm back to stock rooted again. Synergy had some issues but not bad. I even tried team xron's 3d port, but it has some serious compatibility issues.
Sent from my PC36100 using XDA App
Can't wait for FULLY functional.
Sent from my PC36100 using XDA App
jadden said:
All of these roms are fantastic but I prefer synergy then kingdom roms
Battery life might be awful but give it 2 days and the battery life will settle in...
Later there will be custom kernels to increase battery life so much but htc hasnt released their kernel source yet
Click to expand...
Click to collapse
Battery life is awful= failed statment. The battery life is by no means awful on Synergy. I have consistently gotten a full day on heavy usage. Synergy is probably the best rom I have used on the EVO.
Evo4eva said:
Battery life is awful= failed statment. The battery life is by no means awful on Synergy. I have consistently gotten a full day on heavy usage. Synergy is probably the best rom I have used on the EVO.
Click to expand...
Click to collapse
I said battery life might be afwful at first
MikeDroid said:
Can't wait for FULLY functional.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
minus hdmi, it is fully functional.
seems to me that if your base supports hdmi, adding a sense 3.0 UI would not be an issue. I thought most of the developers were using a shift base. I guess if it were easy someone would have a fully functional Rom by now.
Sent from my PC36100 using XDA App
MikeDroid said:
seems to me that if your base supports hdmi, adding a sense 3.0 UI would not be an issue. I thought most of the developers were using a shift base. I guess if it were easy someone would have a fully functional Rom by now.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
shift does not have hdmi. that's the problem. the really impressive part is that synergy will have garunteed hdmi quickly after source is released.
dkdude36 said:
minus hdmi, it is fully functional.
Click to expand...
Click to collapse
minus hdmi = almost fully functional. See my "cart in front of horse" comment. If you haven't used hdmi out you're missing one of evo's best functions.
Sent from my PC36100 using XDA App
MikeDroid said:
minus hdmi = almost fully functional. See my "cart in front of horse" comment. If you haven't used hdmi out you're missing one of evo's best functions.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
ok lol my bad. missed that part...
dkdude36 said:
shift does not have hdmi. that's the problem. the really impressive part is that synergy will have garunteed hdmi quickly after source is released.
Click to expand...
Click to collapse
I will be looking for it. But I'm confused as to why the are using shift as a base.
Sent from my PC36100 using XDA App
MikeDroid said:
I will be looking for it. But I'm confused as to why the are using shift as a base.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
bcuz shift has gingerbread and sense 2.1 now (luckyyyy). doing it that way was easier than porting a sense 3.0 rom, and we got 4g right off the bat. but it's still a sense 3.0 rom in everything except base and rosie apk (and you can always flash a sense 3.0 rosie)
dkdude36 said:
bcuz shift has gingerbread and sense 2.1 now (luckyyyy). doing it that way was easier than porting a sense 3.0 rom, and we got 4g right off the bat. but it's still a sense 3.0 rom in everything except base and rosie apk (and you can always flash a sense 3.0 rosie)
Click to expand...
Click to collapse
So shift is a better base than supersonic due to sense 2.1?
Sent from my PC36100 using XDA App
dkdude36 said:
bcuz shift has gingerbread and sense 2.1 now (luckyyyy). doing it that way was easier than porting a sense 3.0 rom, and we got 4g right off the bat. but it's still a sense 3.0 rom in everything except base and rosie apk (and you can always flash a sense 3.0 rosie)
Click to expand...
Click to collapse
This is not a total true statment. It's very close though. Off the top of my head mail application, additional widgets and additional options are some of the missing items that will never be in a hybrid because it is just to much trouble for not enough gain.
Sent from my PC36100 using Forum Runner
Moricon said:
This is not a total true statment. It's very close though. Off the top of my head mail application, additional widgets and additional options are some of the missing items that will never be in a hybrid because it is just to much trouble for not enough gain.
Sent from my PC36100 using Forum Runner
Click to expand...
Click to collapse
ok thanks i didn't kno this. i wonder what other options there are.....
i've found that virus rom is probably the best if you are used to sense and want all the functions with all the stability. flashed different releases on 2 differents evos and both superior to stock sense and no noticeable issues. - always did full wipe with amon ra. (although i personally stick to AOSP, EVO Deck Gingerbread 1.2 specifically... i flash sense if its a new rom or if i need dialer) there's my 2 cents
Is there one or one in the works? Or is it even possible?
Not yet. Maybe. Check on goodandevo website. I heard something about that there.
Sent from my PC36100 using xda premium
I Found this any comments?
http://www.goodandevo.net/2011/11/kernel-included-in-latest-ota-update-supports-trickle-charging-on-htc-evo-4g.html
I have used this kernel and I see no evidence of trickle charging when I look at Battery Monitor Widget.
m20120 said:
I have used this kernel and I see no evidence of trickle charging when I look at Battery Monitor Widget.
Click to expand...
Click to collapse
Ugh that sucks i was really hoping it was a start for better battery life.
I just switched to an Evo from my Optimus V(best battery life ever) not too long ago. After countless days of unplugging my Evo and having 80% in 10 minutes, I was getting pissed and figured out that the kernel didn't support trickle charging.
So question is, what kernel can I use on stock 2.3 that supports trickle charging?
Sent from my PC36100 using XDA App
There are not any at this point. The only SBC (trickle charge) kernels that are out are for aosp roms. For some reason the few kernel devs we have here despise SBC. We had one with froyo but since gingerbread hit there has been nothing
So they just deal with the battery loss? Ugh.
Sent from my PC36100 using XDA App
qccoles said:
So they just deal with the battery loss? Ugh.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Ugh is right. Even with AOSP ROMs using SBC Kernels, battery life has gone way down hill since Gingerbread came out.
I hope they get this all straight with ICS
Well that sucks. Guess ill be getting a 3500 quicker than I thought. Thanks for the replies!
Sent from my PC36100 using XDA App
I agree. Myn's Warm TwoPointTwo was the best battery EVER. 24 hours on stock, imagine my extended battery? Sadly, I fell in love with MIUI..I should be happy because it's theme city here.
Sent from my RED XDA.
Portable chargers do not work on CM10. Not so sure on CM9, but it's working on stock. Going to try it on GB custom roms
Does not work on Mutant ROM
It works for my cm10 slimbean
Sent from my GT-I8150 using xda app-developers app
Gary122 said:
It works for my cm10 slimbean
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Really... Ok, i'm going to try it on. What portable charger are you using?
Gary122 said:
It works for my cm10 slimbean
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Wow... It does, thanks for the suggestion
when will wireless charging works in wonder? :laugh:
imadiu said:
Portable chargers do not work on CM10. Not so sure on CM9, but it's working on stock. Going to try it on GB custom roms
Does not work on Mutant ROM
Click to expand...
Click to collapse
work on cm9 rc2
Sent from my GT-I8150 using Tapatalk 2
imadiu said:
Portable chargers do not work on CM10. Not so sure on CM9, but it's working on stock. Going to try it on GB custom roms
Does not work on Mutant ROM
Click to expand...
Click to collapse
That's odd, charging is hardware based. Should not be affected by ROM in any ways though. Is your charger charged, or does your device not show anything while charging but its charged anyway.
taurus18 said:
when will wireless charging works in wonder? :laugh:
Click to expand...
Click to collapse
It never will, it is hardware based. Unless Samsung or some OEM manufacturers release a chipped battery for our device enabling wireless charging, it never will happen.
Hey xda community,
I'm dealing with a serious problem
So i'm using my galaxy s3 (SGH-I747M running Liquidsmooth JB 4.2.2) and im dealing with this strange issue when I'm using it. it is actually losing charge while im plugging it into the wall charger, and it is getting very hot. im not even doing anything but writing this. im guessing because of me over clocking /undervolting the cpu. right now im at 6 percent and i even reduced the cpu speed to 300-something mHz using the utility the rom came with. please i really need help on this and i really need a fix.
Sent from my SGH-I747M running Liquidsmooth JB 4.2.2
Could be the charger, do you have another you could try?
Sent from my SAMSUNG-SGH-I747 using xda premium
henryd12 said:
Could be the charger, do you have another you could try?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks for the reply,
Im using the stock galaxy s3 charger, but the charging process is either very slow, or its losing charge while charging. I believe the charging method is the most powerful atm in my household, the apple ones suck and my computer is worse than the wall charger. The phone is still hot, but i changed the frequencies to the original configuration. it helped, but not by much.
Sent from my SGH-I747M running Liquidsmooth JB 4.2.2
install battery stats app and find out what app is hogging the resources in the background, and get rid of it.
this happened to me when i installed xbmc and enabled the dlna service by accident and it kept running even after the program was closed.
TRusselo said:
install battery stats app and find out what app is hogging the resources in the background, and get rid of it.
this happened to me when i installed xbmc and enabled the dlna service by accident and it kept running even after the program was closed.
Click to expand...
Click to collapse
Alright, I'll try that and I'll report back.
Sent from my SGH-I747M running Liquidsmooth JB 4.2.2
TRusselo said:
install battery stats app and find out what app is hogging the resources in the background, and get rid of it.
this happened to me when i installed xbmc and enabled the dlna service by accident and it kept running even after the program was closed.
Click to expand...
Click to collapse
Nope, still losing battery. You could link me the .apk file if you are talking about something else. Can anybody else tell me how I could restore previous cpu frequency and governor configurations prior to overclocking/undervolting?
Sent from my SGH-I747M running Liquidsmooth JB 4.2.2
jperry73 said:
Settings => Performance
Click to expand...
Click to collapse
ok for sure partly its the chargers fault because the wire itself has been bent along where the connector is, because i was using the phone without the charger and im gettting results before the overclock. could you tell me the governor and schedule for the cpu? thanks.
BTW, if i shut down the phone, it will charge, but a bit slower than before. AND, could anybody tell me if wiping batterystats.info will be any good?
Sent from my SGH-I747M running Liquidsmooth JB 4.2.2
I have a friend on stock that went through the same thing because his charger was damaged. As soon as he got a new one all problems were solved. Try Amazon for decently priced chargers
Sent from my SAMSUNG-SGH-I747 using xda premium
jperry73 said:
BBS is always good to have, but not in your situation. You have a bad charger. Here is the BBS XDA free version thread:
http://forum.xda-developers.com/showthread.php?t=1179809
Wiping the battery stats will do nothing for your issue.
In Performance, stock Samsung is Min CPU 384Mhz, Max CPU 1512Mhz, and OnDemand / Deadline I believe. It may be Interactive / Deadline.
I use Asswax / Row
Click to expand...
Click to collapse
Thanks for the help and advice, im currently using those settings. my battery charge is at 2 percent. ill report back tomorrow when fully charged.
Sent from my SGH-I747M running Liquidsmooth JB 4.2.2
UPDATE: ok this is bulls***. i wake up to find my phone to be at 5 percent. it must be the charger. i have no understanding why this is happening. ive only had this phone since april and its doing this. is there any original cpu configs and charger configs?
Sent from my SGH-I747M running Liquidsmooth JB 4.2.2
henryd12 said:
I have a friend on stock that went through the same thing because his charger was damaged. As soon as he got a new one all problems were solved. Try Amazon for decently priced chargers
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
UPDATE #2: ok, so i plugged in my phone my computer using a different cable and it works fine. thanks for the help you guys.
Sent from my SGH-I747M running Liquidsmooth JB 4.2.2
jperry73 said:
Don't get a cheap 500, or 600amp charger... Get a Samsung 1AMP charger off of Amazon...
Click to expand...
Click to collapse
im using a different usb cable but the same samsung charger "brick" and its charging perfectly now. the Samsung usb cable is a piece of garbage now. thanks anyway though.
Sent from my SGH-I747M running Liquidsmooth JB 4.2.2