[Q] Crazy digitizer issues - Samsung Epic 4G Touch

Just activated a Epic 4G Touch last night. Been playing with it pretty much ever since but I'm having a strange problem with what appears to be the digitizer. If I put my finger on the lock screen and hold it there at times it will start jumping around in a crazy fashion. Is this behavior normal for the lockscreen?
It will also sometimes stop half-way through a homescreen pan in touchwiz and otherwise behave strangely and/or unresponsive sometimes selecting things that I have not pressed. The keys on the bottom are also sometimes unresponsive. Anyone else having a similar issue?
I did root it but did didn't mess with the kernel or anything else. I used this method:
http://forum.xda-developers.com/showthread.php?t=1282418
I haven't seen any posts relating to this so perhaps I have a defective phone. Anyone know if a Sprint store would swap it out or do I have to send it back to Amazon (where I purchased it)?

It appears to be due to the wall-wart
Well, I've tracked the problem down. This digitizer issue only happens when I have the phone plugged into the wall using the Samsung 120VAC to USB adapter (the cube that came with the phone). No problem when the USB cable is plugged into the PC or through a different adapter that I had laying around.
Now I'm curious, can someone else try this: Plug in your phone with the Samsung adapter then turn it on and hold your finger on the screen... see if the lockstreen starts jumping around on you.
Thanks.

A number of people around here have noticed the problem including me.

Yeah man it's a known issue with pretty much everyone's phone. A small annoyance if I decide I want to use my phone after I've plugged it in for the night.
Also towards the end of the charge cycle and when it's fully charged, the problem will subside. Only when it's pumping a lot of power into the phone.

Try using a different adapter it works for me.I have my old Samsung captivate adapter and that does not happen anymore
Sent from my SPH-D710 using XDA App

I used another adapter and it works fine. Looks like there is a defect in the Samsung ones then... I'm just hoping its not doing any damange to the phone as it's obviously sending a lot of electrical noise into it. None of the local Sprint stores (I tried 3) would swap the adapter for me since I brought it on Amazon. I called them and they gave me credit to buy a new one so I'm happy.
Thanks for the responses, glad to have cleared this up. Going back to root.

http://forum.xda-developers.com/showthread.php?t=1264219
Sent from that damn ET 4-GEE!!

Related

Crazy charging / battery issues.

A few weeks ago I decided to take the plunge and root/unlock my Gnex. Installed Team Kang AOKP Release and then recently updated to Milestone 4. I am running the GSM Version on Tmobile. Originally as yakjuxw and flashed to yakju before rooting, etc.
Has anyone else run into problems with the Galaxy Nexus charging? It seems to have been progressive. About a week ago my phone randomly started turning the screen on and showing the 'charging' icons and animations as if the phone was plugged in. Then A few days ago I had to play with the plug for it to begin charging. Earlier yesterday, I've reached a point where my gnex would only charge if its off. If i plug the Samsung charger into the phone, the battery screen displays "Not Charging" as opposed to the "Discharging/Charging", so its my guess it knows the charger is plugged in but cannot charge the battery for some strange reason.
It seems im not the only one.
http://groups.google.com/a/googleproductforums.com/forum/#!topic/mobile/RahZtFg39DU
I've contacted Samsung and they are aware that this is happening and have offered to take my phone into repair under warranty but that would require sending my phone off for 2 weeks, so i'd like to try something else.
As pointed out by the last poster in the google thread, squeezing the charger seems to fix the issue but just for a couple minutes. Does this have to do with the contacts/usb charge board/plug?
I have the same problem, but I have root on mobile and I did not cover the guarantee in Samsung
supumaster, the galaxy nexus is a phone that is very easily re-locked and un-rooted. do some searching online. you can 'get your warranty back'
I had the exact same problem, tried everything and nothing worked, finally sent phone to UK here's more info
http://code.google.com/p/android/is...s Owner Summary Stars&groupby=&sort=&id=23789
It sounds like liquid damage to me.
Look really closely inside your charging port for anything green/white, especially toward the very base of the pins. Also, look at the charger itself for any green/corrosion on the pins. If you find any, dip a toothbrush in some denatured alcohol and scrub your charging port.
Works like a charm.
Normally. I'd agree with you, but if you check out that google thread chanchan posted above, hundreds of galaxy nexus users are experiencing the same thing. So either this phone is EXTREMELY prone to moisture damage, or there's something very very wrong.
I had this issue for a day or two at the beginning of February. It disappeared by itself and hasn't returned since.
I had the same problems, specifically it wouldn't charge on some chargers (my car charger), and it would think it was plugged into USB when it wasn't, the lightning bolt would light up, and the screen would never go into full sleep.
I went through a whole lot of that thread, and lots of other people having the same problems, one sugestion was to get a toothpick and stick it in the phone's USB plug and lightly bend the 'tab' up towards the screen. so, i did that, and it fixed all my problems.
likely the tolerance between that 'tab' and the bottom of the plug are so tight, having a USB cord pull on the 'tab' makes some of the data pins short out on the metal surround of the plug. bending it back makes it 'unshort', and work like it's supposed to.
i would highly reccomend being VERY careful with this if you attempt it, i'm guessing its VERY easy to snap off that 'tab' in the plug and ruin your phone.
if this happens again on my phone, i'm sending it back to samsung or verizon to fix.
So I seem to have temporarily corrected the problem with the toothpick trick. I can't advise anyone to do the same as the chance of breaking is probably pretty good. Will let you know if the problem returns.
In other news, I'm on hold with Samsung. I've just been informed that the New York based company that I purchased my Gnex device, is actually not a US device and they will not provide any sort of support for it. If i want support I have to contact UK division of Samsung and all repairs would have to go through them.
I am just f***** livid right now.
I had this problem for a couple months. Now even the toothpick thingy no longer works.
Can no longer get USB data connection. Computer keeps saying "Drivers fail to install" or somesuch. Sometimes it manages to charge via USB, no luck via the wall charger...
Time to send it in. Been a Nokia user for 10+ years, no issues that required it to be sent off for repaired. Super disappointed. Google should get someone else to build their Nexii series...
I have this issue every now and then. It goes away after a reboot.
Sent from my Galaxy Nexus using xda premium
I've this problem too. My nexus always gets stuck on 97-98%, and the battery screen says "Not Charging". So, somewhere on some forum I've found this trick and works fine for me.
Just unplug the charger and then plug it in again after waiting for 10sec, it will gradually go to 100% in 5-10mins and the status will change to "Charging" from "Not Charging".
YuryAC said:
Normally. I'd agree with you, but if you check out that google thread chanchan posted above, hundreds of galaxy nexus users are experiencing the same thing. So either this phone is EXTREMELY prone to moisture damage, or there's something very very wrong.
Click to expand...
Click to collapse
This issue has nothing to go with watter i believe. It was only an excuse for Samsung support guys as this happening way too often and they decided to blame us instead of Samsung.
First time this happened to my Galaxy S II when there was no rain oustside and watter damage was near to impossible. Now this happened to my GNex while i had a flu and were in bed for last two days. Watter? Nah, i felt poor but never pissed on my self nor on my phone :-D BTW, GNex started to charge again when i plugged in an HTC charger. So i'd rather blame charger/charging port quality and not the watter.
Don't take this as a fix but I managed to make the problem on mine go away by gently bending the connector inside the USB port with a pair of tweezers.
So it kinda hints at a contact issue with the connector. Could have stemmed from using non-Samsung provided USB cables and chargers...

Phone only charges when it is off.

Starting two days ago, my phone will only take a charge when it is off. When it is on, it acts like nothing is happening when I plug it in, although sometimes it flashes the charging symbol whether the charger is plugged in or not. I have the latest atop build, although I have been running the rom for a couple weeks with no problems. Also, the gps struggles at times. Any ideas?
Same problems here with charging...you are not alone!!
Sent from my GT-P1000 using xda app-developers app
I had this problem too. Was gonna take it back to Sprint so I Odined back stock and it's started charging. So try doing that. It worked for me.
Sent from my Galaxy Nexus using Tapatalk 2
My wife had that issue when we first got her phone. Ended up re flashing the ROM. I still ended up getting it replaced by VZW since it had the issue with dropping signal.
Had this issue with my VZW Gnex. It looks like it is charging when it is off but I'm willing to bet it charges really slowly. There's a defect on GNEX models where the pin on the connector gets bent down.
Try either using the stock charger as it forces the pin up a bit or search on xda for this same issue. I fixed it by using a thin knife blade and gently pushing up the connector. I only had to do it once and it worked well.
Hope that helps!
erodriguez87 said:
Had this issue with my VZW Gnex. It looks like it is charging when it is off but I'm willing to bet it charges really slowly. There's a defect on GNEX models where the pin on the connector gets bent down.
Try either using the stock charger as it forces the pin up a bit or search on xda for this same issue. I fixed it by using a thin knife blade and gently pushing up the connector. I only had to do it once and it worked well.
Hope that helps!
Click to expand...
Click to collapse
Hi, I've been having this problem since a couple of days and this post just remembered me that I had run into the same issue in my very old Motorola Milestone. Here's what I did then and what I did now on my GNex, and I think i've found a solution.
You'll need a needle (the thinner the better) and a can of electronic cleaner, if you've ever opened a PC to clean the memories and slots, this is the one you've used alongside the compressed air can. You can find this on your local electronics shop, and it shouldn't be too expensive (think of an equivalent of RadioShack, since in my country there's no RadioShack).
Now, let's get on with it.
Turn off your GNex and pull out the battery.
Now, VERY GENTLY, with the tip of the needle try to pick out all or the majority of the lint deposited in the charging port. You'd be amazed.
To wrap up, apply a bit of the electronic cleaner into the charging port, clean with a cloth the excess on the chassis of the phone (do NOT use the cloth into the charging port, because in doing so you'll risk leaving lint behind) and let the charging port dry for 5 or 10 seconds, it evaporates really quickly.
Now put the battery back in and power on the phone once more. Let it fully boot and plug your charger in (as recommended in this post, you may want to use the one that came with the phone). In my case it worked.
Not sure if it's definitive solution but it does work now. This happened to me about a month ago running AOKP, I thought it was the rom doing some funny bussiness with my phone, so I switched to Paranoid Android, and it happened once more the day before yesterday. I was ready to switch roms today once more but decided to Google around and again, thankfully I came across erodriguez87's post which reminded me of what I did in the past. I'll update this post for this next month to let you know if the issue happened again or not, to encourage people to apply this solution (or not). Cheers.
erodriguez87 said:
...I fixed it by using a thin knife blade and gently pushing up the connector. I only had to do it once and it worked well.
Click to expand...
Click to collapse
I used a toothpick to bend it up slightly (towards the screen). I didn't want to use anything metallic in case shorting the connectors might cause damage.
Weird thing!!
As everybody here I am having this very same problem, not charging anywhere (mains or pc), even with stock cable and charger.
However, when I tried the eSATA port it worked fine, and I can access the phone normally
Any idea why?
Solution ?!
I had the charger read normal USB ports and charger.
I have done these steps so far, so I guess they must be the solution, however I do not know if the solution is permanent or as some people pointed out it is a come-and-go problem, anyway here are the steps:
- Restart bootloader ( shutdown your phone and hit all three buttons together - GNEX - and press volume down button once and then power button, then volume up and power to start phone again).
- Enable Developer Options ( You do this by tapping several times on the Build Number in About Phone)
- Enable USB debugging in Developer Options.
Again, I don't know which solved the problem, and if it is a permanent one, anyway try it and let me know the result
My son is having exactly the same problem, his Galaxy Nexus only charges when it is turned off.
I found a solution (sort of)....
I discovered that when I put the charger in the wall socket 3 times quickly after eachother (like: tak tak tak) and leave it in the third time, it sometimes starts to charge.
maybe you have to try it a few times to see it work, it doesn't always work.
It should work within 10 times trying i would say.

No Touch

So I have in my possession a very nice kindle fire hd (8.9).
A friend of mine says that she locked it by accident somehow and I said, sure I can fix it.
The problem is it doesn't detect touch. It's not frozen and I've done a lot of research on the matter. I took it apart, put it back together. Nothing. the clock works and so do the buttons but no touch is detected. I know I can get an otg and connect a mouse but while that ships (I need one anyways) I'd like to get this to work.
I've actually had a similar problem with my phone (e4gt) where the touch screen wouldn't work with certain chargers. I ultimately learned that its some sort of grounding issue. Besides that I've never heard of this happening on any device even.
Any help would be greatly appreciated.
Also its in pristine condition. No wear or water damage in the outside or inside.
I don't know about the touch issue, but I can say that a mouse won't work unless it's a very low powered one or you use a powered hub. Just giving you a heads up,
Would a Bluetooth one work? except there's the problem of setting it up.
I think i'll root to diagnose better.
Fixed
I got it. One of the cables was upset or something because when i unplugged and replugged it it started working. Broke some things here and there but it's all cosmetics,

[Q] Tab Pro 12.2: Screen and Button Issues

I just got this tablet (to replace the garbage SGH-I467) a few days ago (Thu., May 15th). For the first couple of days it worked like a dream. However, the last 4 nights/3 days, I have been encountering some strange issues. What I will do here is describe the issues I've been having, what I have done in attempts to fix them, list some of the things I think may have caused it, and include any additional info/questions.
Before all that though, I would like to mention that I am not a developer, but I am a bit 'tech savvy' and am more familiar with/knowledgeable of technology than the average user. Also, I have spoken with Samsung tech support and even had the support guy access my Tab Pro 12.2 remotely (I will explain what I learned from that below). So, without further ado (I apologize in advance for the long winded nature of this post, but I want detailed):
The Issues:
1) Screen "flickering"—By flickering I mean that it is shutting off and turning on rather rapidly and sporadically, though inconsistently.
I first encountered the problem 3 days ago (the 18th).
Four nights ago (the 17th), before going to bed, I plugged the device into the same outlet I have used for all my mobile devices, when I woke up (on the 18th) the screen was doing exactly what I described. I hit the home button a few times and it stopped.
That night (the 18th) I plugged it back in to the usual spot before going to bed. The next morning (yesterday, the 19th), the screen was "flickering" again. I tried to press the home key a few times, as well as both the soft keys, nothing. In between "flickers" you can see the lock screen, where I have to enter a pin, but even while visible I can't type anything. So this time, to try to solve the problem, I held the power button + volume up to get to recovery and wiped the cache partition, rebooted the device, and viola, it worked again. Thinking that I may have to factory reset the device if the problem persists, I used Kies to backup all my data. I used the tablet the rest of the day, even plugged it in (in a different outlet than the one next to my bed) for a while and had no issues.
Last night (the 19th) I did pretty much the same thing, but this time, thinking that it might be an issue with the device getting too much power (the Quick Start Guide says: "Note: Connecting the travel adapter improperly may cause serious damage to the device."), I used a travel adapter from one of my other, USB 2.0 devices (the only difference between the adapters is the output: 2.0 = 5.0V—2.0A vs. 3.0 = 5.3V—2.0A, and output was specifically what I was concerned with). This morning (the 20th) the problem has returned, but now includes my second issue: the hard home button and both soft keys, back and recent apps, no longer function. So I immediately tried to wipe the cache partition and reboot, but this time it didn't work. Thankfully I had anticipated this yesterday and had that Kies backup, so I wiped the entire device back to factory settings. But alas, it was unsuccessful and the problem persists, including the loss of button functionality, with the exception of the power and volume buttons.
It is important to note that when I first got the Tab Pro 12.2 and set up the lock screen, I used the option that delays the actual locking of the device 10 minutes after screen timeout, but set it so that if I lock the screen with the power button it ISN'T delayed and immediately locks. That being said, a couple of times when the "flickering" stopped long enough to momentarily use the device, I was able to enter my pin and unlock. But when the screen starts flickering again, it locks the device, so the power button must be affected as well. Though since the first factory reset of the device, I haven't set up a pin. I have done several factory resets and none of them have worked. The best result has simply been limited (no back, recent apps or home key) and momentary functionality. I tried using Kies to do emergency firmware recovery, but every time I click the option it disconnects the device.
When Samsung tech support remotely accessed by device (I used one of the momentary functionality windows to download the required application) the agent was able to utilized soft and home key functionality, even though I couldn't. This tells me that it was hardware related, not related to UI/software.
So there are a couple of things I think may have caused/contributed to the problem:
The first, which I vaguely touched on above, is the power issue. Perhaps I have shorted the device out somehow. The outlet I use to charge things while I'm sleeping is on the wall behind my bed, so I have to use a common extension cord, one that has 3 outlets at the end. I have a light plugged into that and in the past have charged both my SGH-I467 (AT&T Note 8.0) and my SGH-I747 (AT&T S4 Active) with that cord and outlet. That is the only place I have charged the SM-T900 overnight, but none of the other power sources I have used have caused these issues.
The second possibility is a virus some sort. I have never used the Samsung app store on any of my other devices, but in order to update the Hancom Office suite I had to. Since I had an enjoyable time using it to that end, I decided to see what else I could find on Samsung's store. I downloaded a couple of things (the "Official Captain America game" and a couple wallpaper/theme apps) and was looking around the store to see if there was anything else I wanted to download. I found several apps that had reviews claiming they were trojans, so I immediately checked the reviews for the apps I had downloaded, but none of them had similar reviews. However, that does not mean they didn't have viruses.
So, what do the resident Android gurus of XDA think about these issues?
I tried searching all over the forums and elsewhere online for people having the same issues, but couldn't find anything. Have any of you ever encountered something similar to this?
Until recently, I hadn't ever heard of anyone getting a virus on an Android device. Are they common? What is the nature of Android viruses?
If these issues do have something to do with overcharging/shorting the device, how can I mitigate that problem? Tonight when I charge the tablet, instead of using the USB 3.0 charging cable, I am going to try just using the 2.0 cable. As I understand it, that can be done by simply plugging it into the right side of the port. Hopefully that will stop exacerbating the problem.
Again, I apologize for such a long winded post. I would like to thank you all in advance. If ever I have problems with an Android, you guys are the ones to ask!
*UPDATE* Before I started typing this I was attempting to run the Kies 'Firmware Upgrade and Initialization', as opposed to 'Emergency Firmware Recovery', to see if that too would disconnect the device. Unfortunately it said that my device needed to be charged first. So I shut it down and plugged it into a surge protected strip and began typing this post. Occasionally I would go over an check the charge. While it was shut down and charging I was able to use the home key to bring up the green battery. Once the charge looked like it was about 75% complete I turned it back on and lo and behold, the "flickering" issue looks resolved and so does the button issue. I can go back, enter the recent apps and task manager, and use the home key functions. For how long this will last, however, is unknown. I guess we'll see in the morning. I'll post what happens tomorrow.
What kind of case are you using? Some users have seen issues with some cases that use magnets for auto-sleep-wake. When the front of the cover is flipped back behind the tablet, the magnets seem to activate the auto-sleep feature
Sent from my SM-P900 using Tapatalk
RE: Case?
dodo99x said:
What kind of case are you using? Some users have seen issues with some cases that use magnets for auto-sleep-wake. When the front of the cover is flipped back behind the tablet, the magnets seem to activate the auto-sleep feature
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
I am not using a case or cover at all...
same issues here
Sounds exactly as the same issue I have had the last week. I have done several factory resets triad to avoid installing as many applications as I had prior the factory reset (to see If it was an app causing the issue). No solution yet but I will try your way with kies described above. I have a tab pro 8.4.
VeinkWiles said:
So, what do the resident Android gurus of XDA think about these issues?
Click to expand...
Click to collapse
I am no guru, but it sounds like a loose connection. Maybe it is affected by temperature. Try it on a (not too) hot water bottle or on freezer packs.
Mike Austin said:
I am no guru, but it sounds like a loose connection. Maybe it is affected by temperature. Try it on a (not too) hot water bottle or on freezer packs.
Click to expand...
Click to collapse
It's not overheating. It can get warm, but it's never gotten hot. And I've had other devices that have seriously overheated and still functioned, albeit slowly.
**UPDATE**
After I got it working the night I originally posted I let it fully charge (it's important to note that I got it up to about 75% while it was off; green battery the only thing on the screen, and I had home button functionality), then disconnected it and disabled all the radios, put it in power saving and left it over night without power. Doing that I was able to use it all day yesterday. But while I was full-charging it, after it reached 100%, I noticed that it started acting up almost immediately. The sound was on and kept making the lock screen sound (that's how I noticed it from across the room). So it is tied to the power/lock key. But disconnecting it before it could get out of control mitigated the problem. Last night I was going to try to charge it over night with USB 2.0, but I fell asleep before changing the cable out, so it charged on 3.0 all night and is back in poor repair. I'm currently trying to full charge it while off to see if that gives me functionality again.
Either way, each time I fix it the solution becomes more difficult/timely than the previous one. It's clearly not getting better, so I'm going to have to send it in to repairs.
Sent from my SAMSUNG-SGH-I537
VeinkWiles said:
It's not overheating. It can get warm, but it's never gotten hot. And I've had other devices that have seriously overheated and still functioned, albeit slowly.
**UPDATE**
After I got it working the night I originally posted I let it fully charge (it's important to note that I got it up to about 75% while it was off; green battery the only thing on the screen, and I had home button functionality), then disconnected it and disabled all the radios, put it in power saving and left it over night without power. Doing that I was able to use it all day yesterday. But while I was full-charging it, after it reached 100%, I noticed that it started acting up almost immediately. The sound was on and kept making the lock screen sound (that's how I noticed it from across the room). So it is tied to the power/lock key. But disconnecting it before it could get out of control mitigated the problem. Last night I was going to try to charge it over night with USB 2.0, but I fell asleep before changing the cable out, so it charged on 3.0 all night and is back in poor repair. I'm currently trying to full charge it while off to see if that gives me functionality again.
Either way, each time I fix it the solution becomes more difficult/timely than the previous one. It's clearly not getting better, so I'm going to have to send it in to repairs.
Sent from my SAMSUNG-SGH-I537
Click to expand...
Click to collapse
Sorta sounds like a screen grounding problem. I had a nexus seven with this issue and the charger seemed to really make it act up. Needless to say I gave that to my wife and bought this. If the digitizer is not grounded properly it will act up.
Turning on developer settings and set it to show touches on screen. See if when charging the screen registers more touches than you are doing.
Sent from my SM-T320 using Tapatalk
Re: developer settings; display touches
dottat said:
Sorta sounds like a screen grounding problem. I had a nexus seven with this issue and the charger seemed to really make it act up. Needless to say I gave that to my wife and bought this. If the digitizer is not grounded properly it will act up.
Turning on developer settings and set it to show touches on screen. See if when charging the screen registers more touches than you are doing.
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
Damn! That's an outstanding idea! The only downside is that last night I sent the tablet to Samsung's repair department, so I can't test that out. But once I get it back, if the problem persists I will definitely be doing that first. Thanks for the advice dottat.
Fw:Re: developer settings; display touches
mikegbg said:
Sounds exactly as the same issue I have had the last week. I have done several factory resets triad to avoid installing as many applications as I had prior the factory reset (to see If it was an app causing the issue). No solution yet but I will try your way with kies described above. I have a tab pro 8.4.
Click to expand...
Click to collapse
Hey dude, check out dottat's reply. He's got a really good idea that may shed some light on the source of the problem. Unfortunately, I can't try it out. If you do it, let me know how it goes. Maybe you can take some screenshots? Either way, hopefully you can get something out of it.

[Q] Touchscreen behaves erratically when charging

Hey All
Today I picked up an HTC One M8.
Have set it up and only had it up and running for a few hours.
I plugged it in to charge using the charger that came with it and noticed that the screen would become erratic. Phantom touches would register making it very hard to use. Have tried it in different sockets but the issue remains.
I have tried a spare charger that I have in the house and the issue is not present.I know the HTC charger is a little different in that it supports some kind of quick charger, so its not really a like for like swap I guess.
Is there a chance that the included charger is faulty? Or could the phone be at fault?
I really don't want to have to return it but will it it looks like its the phone that has an issue.
Thanks
Well, at this point its hard to guess from here. Can you upload some snaps/videos ? It would be helpful for anyone who visits the thread. It doesn't take much time either. :good:
Is it a brand new phone? if not I think the digitizer is going bad.
scorror said:
Is it a brand new phone? if not I think the digitizer is going bad.
Click to expand...
Click to collapse
Yeah it's brand new. Phone is fine off charge and when using other charges. It's just the stock charger tat seems to cause issues.
warpkid said:
Hey All
Today I picked up an HTC One M8.
Have set it up and only had it up and running for a few hours.
I plugged it in to charge using the charger that came with it and noticed that the screen would become erratic. Phantom touches would register making it very hard to use. Have tried it in different sockets but the issue remains.
I have tried a spare charger that I have in the house and the issue is not present.I know the HTC charger is a little different in that it supports some kind of quick charger, so its not really a like for like swap I guess.
Is there a chance that the included charger is faulty? Or could the phone be at fault?
I really don't want to have to return it but will it it looks like its the phone that has an issue.
Thanks
Click to expand...
Click to collapse
Do you have a case on your phone? I have a UAG case and the charger sometimes doesn't fully click leading to that behaviour. Without the case there is no problem using the phone while charging.
Maybe the stock charger is faulty. Probably the wires has lost continuity.
I have the same issue with a unofficial charger (2.0A).
No issue with original charger (1.5A)
You are not alone
I also have a HTC One M8 with the same problem!
I have to disconnect the USB cable so that I can use the phone correctly without 'phantom touches' activating things I didn't want.
A classic example is pressing the back button will more often than not take me to google now. It's not supposed to do that. It only ever does this when charging.
Also when using any app the phantom touches will activate things I didn't want it to. Some apps will indicate which button you clicked and this is the perfect way to see this problem in action, because buttons will be clicking that you didn't even touch.
It's almost like the touch screen becomes ridiculously sensitive and even just a touch of breeze from a fan can activate a phantom touch.
My phone has done this since brand new. I've had the phone for around 3 months now. There was a software update since I had the phone and it didn't fix the problem.
It does this for me with the stock USB cable, samsung USB cable, generic USB cable, charging from AC/PC/Car it doesn't matter.
It even has the problem when the battery is at 100% with the cable connected.
The only way to accurately use the phone is to unplug the cable!
I'm in Australia on the Telstra network
Android: 4.4.3
HTC Sense: 6.0
Software: 2.23.841.1
HTC SDK API 6.25
Erratic Touch on Verizon HTC One M8
This has been driving me mad.
Got Verizon Variant Red HTC One M8 near the beginning of August.
I bought a spigen clear case, a longer usb cable, and a 2AMP charger to use at work. I was chewing through the battery while playing Clash of Clans on it at work.
I pretty much always turn on visual feedback for touch on my smartphone now and noticed sometimes while playing Clash I would see multiple touches go in a horizontal line across my screen (if you do not know you play clash of clans in a horizontal position so technically the lines would run vertically down the phone)
I also have a tempered glass screen on my phone so I figured it was some kind of freak nuance with the case pushing the glass or something.
Bought a UAG Case for my phone, few days later I notice the same behavior, bought cases have a small "lip" to protect the screen if you drop the phone face down, I again figured this must be the culprit and bought a new case.
Barely there Clear case by casemate, I have had the case for 3 days and today is my first day at work since, immediately upon connecting my charger I noticed the erratic touch behavior.
At this point I realized it was never the case, it has to be something with charging in general or the specific charger I am using.
Anyone got any clue what is actually causing this issue?
Links to all of the hardware I mentioned in this post for clarification:
iXCC-SMART-Capacity-Travel-Charger/dp/B00HPTU0OU/ref=sr_1_16?ie=UTF8&qid=1410767078&sr=8-16&keywords=2+amp+charger
Hi-Speed-Braided-Tangle-Free-Charging-Motorola/dp/B00HZXYYQ6/ref=pd_cp_cps_2
Case-Mate-Barely-There-Case-HTC/dp/B00IZFYI28/ref=sr_1_1?s=wireless&ie=UTF8&qid=undefined&sr=1-1&keywords=barely+there+htc+one+m8
Spigen%C2%AE-STRONG-FLEX-Release-Capsule-Premium/dp/B00IF5B218/ref=sr_1_6?s=wireless&ie=UTF8&qid=1410767095&sr=1-6&keywords=htc+one+m8+case
URBAN-ARMOR-GEAR-Case-HTC/dp/B00IEFUB3E/ref=sr_1_1?s=wireless&ie=UTF8&qid=1410767120&sr=1-1&keywords=uag+htc+one+m8
EDIT: not enough posts to post links, but if you just insert the standard amazon address in front of all of those you'll get to the items in question.
Hi guys, any news?
I'm experiencing the same issue and this is driving me mad.
Experiencing this with different chargers. My cover is a Spigen Ultra Hybrid Metal Slate...if I put it off, theres no problem while charging
Greetings from Switzerland
Hi guys,
I have faced the issue as well. In my case, if I charge the phone using the dot view case then the touchscreen behaves wrongly. However, if I charge the phone with no case at all it works fine.
Anyway after I flashed the latest firmware (.401.6) the problem is gone. What firmware do you have?
Cheers.
Hi Guys,
For anyone interested, I have just noticed that it happened depending on the charger also.
Cheers.
I have the same problem
Using htc one m8 developer edition 4.4.2. This issue comes with every charger. With or without case or screen protection.
Yep, I've noticed this issue as well. Any solution?
warpkid said:
Yeah it's brand new. Phone is fine off charge and when using other charges. It's just the stock charger tat seems to cause issues.
Click to expand...
Click to collapse
If it's brand new, take it back for a replacement. The sooner the better because the longer you wait, the more they may think it is user caused.
I just got my phone replaced due to bad mic. I had a brand new one on release day and now I got a refurb both suffered the same issues. It's not always that it does it but it certainly pisses you off. Same symptoms as the op describes, I have yet to find a permanent solution.
This is so super irritating. I feel you. I just found out though that it occurs when I have my case on.. So whenever i use the phone when I'm charging I have to pull the case off. It really doesn't make any sense lol but this is my workaround for this bug.
I also have the same problem
It seems to occur when the phone is close to full charge. Every app goes crazy. When I unplug the charger it returns to normal.
jaycaplan said:
It seems to occur when the phone is close to full charge. Every app goes crazy. When I unplug the charger it returns to normal.
Click to expand...
Click to collapse
I have the same issue with mine; I found a website which said to do the following:
Using two fingers swipe down on the status bar then touch the gear icon > Display & Gestures > G-Sensor calibration
Place your phone on a flat surface then touch Calibrate.
After the calibration process has finished tap Ok.
You should also calibrate the finger touch on your screen to deal with the keyboard issue.
Open “Settings” and go to “Language and Keyboard”
Tap “HTC Sense Input”
Tap “Advanced”
Tap “Calibration tool” (Calibrate your screen for a better touch experience)
Now you are asked to type the given sentence
One done, Calibration Complete message appears
Hit “Reset Calibration” to reset screen to factory default
Click to expand...
Click to collapse
It's still present, but it hasn't been as bad - I turned on the visual feedback in the developers settings, and you can watch the cursor fly all about the screen like it's possessed!
Same issue here, on the latest software. This is my second m8 with the same issues.

Categories

Resources