Develop Bugs

HTC desire 2.2 HELP please

Ok so, this is my first android phone and after being prompted to install the 2.2 update on my European htc desire, i downloaded and started it installing. It gets to about 23% and says process system unavailible and after reading what people said i cleared the phone and tried to install the update manually from the SD card. This didn't work
My phone currently does this
Will boot into what it says is 2.2 but with no wifi, no service, and no SD card showing up
then after about 5 minutes it will reboot.
I have no idea what i can do to fix this? could someone please help me, i'm a noob with android so a clear step by step would be much appreciated

anyone

I am having the same issue... Anyone some help please...

I had a symetrical experience.. I can't post links yet, but you if you look at my posts you should be able to find what worked for me.

Futurian said:
I had a symetrical experience.. I can't post links yet, but you if you look at my posts you should be able to find what worked for me.
Click to expand...
Click to collapse
how did you create a blank goldcard, i can't access my SD card on my phone while it's in the phone so how did you do it

Do you have a WIFI connection? I do, and did the OTA 2.2 upgrade over WiFi with no problems, on my Unbranded European HTC Desire.
If youre phone won't boot properly, there are a few answers; 1) Return in to HTC, they're getit working and back to you, 2) Return it to th place of purchase, 3) Root/reflash (but sounds like it might not be an option).
Dale

F3L1X1 said:
how did you create a blank goldcard, i can't access my SD card on my phone while it's in the phone so how did you do it
Click to expand...
Click to collapse
I followed the instuctions in the "[TUT]Complete upgrading guide(root, unroot, flashing ROM & updates)" thread within Desire Android Development. (Post #3)
dedlite said:
Do you have a WIFI connection? I do, and did the OTA 2.2 upgrade over WiFi with no problems, on my Unbranded European HTC Desire.
If youre phone won't boot properly, there are a few answers; 1) Return in to HTC, they're getit working and back to you, 2) Return it to th place of purchase, 3) Root/reflash (but sounds like it might not be an option).
Dale
Click to expand...
Click to collapse
When I got in touch with HTC they wanted £50 to do a reflash, falsely accusing me of rooting my device..

was that 50$ to send it to them? or can they do it without having it there. Because if THEIR update screwed up my phone i don't see why i should have to pay for a fix

maybe a silly question but did you try a factory reset?
http://www.htc.com/www/howto.aspx?id=805&type=1&p_id=312

HugoTouchHD said:
maybe a silly question but did you try a factory reset?
http://www.htc.com/www/howto.aspx?id=805&type=1&p_id=312
Click to expand...
Click to collapse
yeah i did that, about the only advice the australian HTC support guy gave me -____-

F3L1X1 said:
was that 50$ to send it to them? or can they do it without having it there. Because if THEIR update screwed up my phone i don't see why i should have to pay for a fix
Click to expand...
Click to collapse
Tell me about it, so thankful I managed to fix it myself!

It sounds like you are alll applying an OTA update for the standard ROM to what was a branded device. There are lots of explanations as to how to fix this if this is the case
In summary
Download update from mentioned here
Copy this to root of your goldcard and rename to update.zip
Turn off phone
Turn on holding down vol down
Select Bootloader then Recovery (an image of device should appear with exclamation mark over)
In menu (sorry forgot how you get in, if it does not appear then try power+vol down or power + back). From there choose apply update.zip
Wait while update applied
After update select reboot and wait for device to boot
Video of it here

jameson_uk said:
It sounds like you are alll applying an OTA update for the standard ROM to what was a branded device. There are lots of explanations as to how to fix this if this is the case
In summary
Download update from mentioned here
Copy this to root of your goldcard and rename to update.zip
Turn off phone
Turn on holding down vol down
Select Bootloader then Recovery (an image of device should appear with exclamation mark over)
In menu (sorry forgot how you get in, if it does not appear then try power+vol down or power + back). From there choose apply update.zip
Wait while update applied
After update select reboot and wait for device to boot
Video of it here
Click to expand...
Click to collapse
I've just tried this again, installation looked like it went through ok, rebooted and relaoded into sense, then it shows me a status bar counting, normally this gets to about 10% then says ?Sorry process system is not responing, so i can either click wait or force close, then in continues upto about 97% then reboots and reloads only to load a white screen showing htc and continues counting in percentages, gets to about 15% then says force close, then onto about 91% then reboots this goes on for a while until it just shows me a sorta bricked phone with no wifi, gsm or any real functionailty and it continues to reboot every 5 mins, back to where I started showing 2.2 as installed
One strange thing I have noticed is that my CID is
CID: 00000000000000000049E917D100A69E
Reversing CID
CID: 00A600D117E949000000000000000000

Can't find update.zip on SD card during recovery
Tried all this, thanks. Goldcard created using Gold Card Tool 0.0.5 (awesome job Klutsh) . I get the error message:
"E:failed to open /sdcard/update.zip (No such file or directory)" even though it is in the root dir when I look at the card on my PC.
Should it be in a directory called /sdcard ?

chessmaster82 said:
I've just tried this again, installation looked like it went through ok, rebooted and relaoded into sense, then it shows me a status bar counting, normally this gets to about 10% then says ?Sorry process system is not responing, so i can either click wait or force close, then in continues upto about 97% then reboots and reloads only to load a white screen showing htc and continues counting in percentages, gets to about 15% then says force close, then onto about 91% then reboots this goes on for a while until it just shows me a sorta bricked phone with no wifi, gsm or any real functionailty and it continues to reboot every 5 mins, back to where I started showing 2.2 as installed
One strange thing I have noticed is that my CID is
CID: 00000000000000000049E917D100A69E
Reversing CID
CID: 00A600D117E949000000000000000000
Click to expand...
Click to collapse
i get this same problem. How do i create a gold card if when i plug in my phone to my pc it won't recognise it and when i put the SD in the phone the bricked 2.2 won't recognise it

F3L1X1 said:
i get this same problem. How do i create a gold card if when i plug in my phone to my pc it won't recognise it and when i put the SD in the phone the bricked 2.2 won't recognise it
Click to expand...
Click to collapse
I had to format the card in a card reader in my PC, then use the Gold Card Creator mentioned elsewhere in the thread. You have to install HTC Sync because enough drivers are in there to at least allow the apps to 'see' the card at physical level, even if the bricked Android doesn't. Set the phone to USB debug mode in Settings/Applications - the phone stays 'on' long enough between reboots to do that and get a CID out of it! Then Gold Card Creator works well enough to get the CID from the SD.
I'm trying this again with a 2GB card to see if makes any difference.

Check folder settings when using windows
bearMedicine said:
Tried all this, thanks. Goldcard created using Gold Card Tool 0.0.5 (awesome job Klutsh) . I get the error message:
"E:failed to open /sdcard/update.zip (No such file or directory)" even though it is in the root dir when I look at the card on my PC.
Should it be in a directory called /sdcard ?
Click to expand...
Click to collapse
Quick update to this. Make sure you have extensions of known file types SHOWING in your folder settings. I was naming the file update.zip.zip!!
Thanks to ALL in this forum for get apps and assistance. I unbricked my phone tonight thanks to you all

well i phoned the shop here in australia that i bought it from and they said they've had alot of desires being returned because they've been bricked by the update and to just send it back and they'll fix it and update to 2.2 for me

[Q] Can not escape bootloader - volume and power keys unresponsive?

Hey guys,
I hope you're all well.
Great forum by the way.
I've searched extensively for solutions to my problem, yet I've been unable to find anything.
I think the problem started yesterday, when I restarted my phone and for some reason it went into safe mode.
I didn't lost any functionality so I didn't care too much until this morning, when I tried to get out of safe mode.
My phone has taken me to the bootloader (white screen with skateboarding Android) and for some reason, the power key (used to select options) and the volume keys (used to scroll) are not functioning.
As a result I cannot click or choose anything and the white bootloader screen persists in limbo.
I desperately need some suggestions, any help is very much appreciated.
Just so you know:
I've taken the battery out and put it back in, which takes me straight back to the bootloader screen, same with sim card.
The phone is running Coredroid (can't remember which version).
Has S-OFF.
Sorry I'm not much of an expert...
Also, on startup, phone says something along the lines of:
SD Checking...
LOADING... [PD98DIAG.zip]
NO IMAGE!
LOADING... [PD98DIAG.nbh]
NO IMAGE OR WRONG IMAGE!
LOADING... [PD98IMG.zip]
NO IMAGE!
LOADING... [PD98IMG.nbh]
NO IMAGE OR WRONG IMAGE!
Kind regards,
- Ric

Something has become corrupted.
Best bet would be to use an ruu 2.36.405.8 and lower, once loaded up, skip through the setup and then root again.
http://driphter.com/index.php?topic=3867.0
after you've done all that, install rom manager, and then restore your last backup.

Just a quick update.
Managed to get into Clockwork Mod Recovery.
Got the SD Card to mount.
Formatted it in windows.
Copied over Coredroid.
Went thru the install process.
Installed without error.
Booted up.
Took it's time, displayed the Coredroid animation but then vibrated and took me straight to Bootloader again.
Any advice or best to do this RUU thing?

Would this:
RUU_Ace_HTC_WWE_1.32.405.3_Radio_12.28b.60.140e_26.03.02.15_M3_release_155032_signed
Be ok?
Am I in the right ballpark?
Truly got no clue when it comes to this stuff

use the 2.36.405.8 RUU, then you wont have to spend your time updating the radio and such, that version of gingerbread is rootable using gingerbreak (so just follow that path of my method and you're set)

JSLEnterprises said:
Something has become corrupted.
Best bet would be to use an ruu 2.36.405.8 and lower, once loaded up, skip through the setup and then root again.
after you've done all that, install rom manager, and then restore your last backup.
Click to expand...
Click to collapse
Hello mate,
Just a quick question.
How do I get my computer to recognize my phone prior to running this RUU thing?
Considering I can't scroll or select anything in bootloader screen?
Can I run this RUU thing from ClockworkMod?
Kind regards,
- Ric

you run it from your pc. its an advaced installer that pushes the stock rom to the device and overwrites everything... it will put the phone into a different bootloader state than the one you can nav through.

Also, sometimes the phone is booting into bootloader, while other times it is booting into ClockworkMod.
It seems I have no control over which screen it initially boots to.
I DO HAVE options in ClockworkMod because my volume keys allow me to scoll and my power button allows selection, whereas in bootloader, the keys do not function.
Could you PLEASE provide some advice on how to boot into ClockworkMod rather than bootloader?
Kind regards,
- Ric

JSLEnterprises said:
you run it from your pc. its an advaced installer that pushes the stock rom to the device and overwrites everything... it will put the phone into a different bootloader state than the one you can nav through.
Click to expand...
Click to collapse
Yes I do realize I run the RUU from the PC.
I don't think I was very clear.
I was trying to ask you what state the phone needs to be in?
Do I have to mount the SD Card from ClockworkMod?
Or can I run the RUU while in Bootloader?
Does it matter?
Neither have worked.
I get a 170 error (USB Connection error).
The RUU cannot see my phone.
I was wondering if there's a way to fix this?

I have also now tried to install Leedroid and Gingervillian.
Both have installed perfectly but refuse to boot all the way.
Instead taking me back to Bootloader...

Ok, Leedroid somehow booted.
No network or anything though.
Very unstable...

if the phone is running leedroid now and you have the htc sync tools installed (but without sync running, just needs to be installed for the drivers)
leave it as it is connected to your pc, doesnt matter if debugging or anything else is on or off. just leave it alone sitting where it is on your desk or wherever it is...
Start the RUU, and then just follow the path the installer takes you through, then let it do its magic...

Ended up d/l Cyanogen.
Installed it.
Working, detected networks, wifi is connected.
All good I suppose.
That was a bit scary!
Thanks for your help mate.

HTC Desire -- Stuck at HBOOT after RUU

Hopefully I'm just being blind here -- and I have tried a number of guides to fix this -- but I'm pretty stuck.
Couple of days ago the volume down button started playing up, then the menu and search keys stopped working. At the time I had rooted the phone with unrevoked and installed CM7.3 (iirc), and taken the S-OFF with Alpharev 1.8. I figured it was probably a software issue and for some reason decided to go back to run an RUU (rather than just running a different ROM, don't really know why on earth I did that). Kind of having a feeling that I was very dense and ran the wrong RUU, as now the phone is simply stuck at HBOOT.
When I say stuck, I mean as soon as I turn on the phone it goes directly into the stock HBOOT (FASTBOOT -- RECOVERY -- CLEAR STORAGE -- SIMLOCK) yet NONE of the buttons work (so I cannot navigate it at all). Perhaps it is actually a hardware issue, which would make sense as it boots straight into HBOOT, no HTC screen or anything. When it runs the SD check it comes back with wrong / image missing in all the checks.
Tried running ADB, couldn't find the phone. Other RUU's return error 170 as though they can't find the phone. Phone does register "HBOOT USB PLUG" when plugged in though, and my Windows 7 machine does recognise it, but as there's a new RUU on there USB debugging is not enabled and I cannot access the SD card through the phone.
The full info on the HBOOT screen is --
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
Any help would be much appreciated... Later on today I'll pick up a card reader, figure my only option now is to try and get through to it that way?

Hmmmm!
I'm not sure but it actually could sound like a hardware issue. You have the STOCK HBOOT and then ran the RUU for the HTC Desire? If u did so I cant see it as a software brick. PM me if you need some more help. I had a Desire for some month ago that i bricked A LOT more than yours, and i got it fixed (by myself... took some nights thought :/

Yeah I thought that as well, but before I flashed the RUU, although the phone was powering directly into HBOOT, I could use the buttons to navigate the menu. Now, I simply can't.
I should maybe add that when it checks the SD it returns with wrong / missing image (can't remember the exact wording -- pops up then goes pretty quickly).
Also this afternoon I opened up the desire and checked and reseated the buttons, all seem to be working as normal. Seeing as it's stuck at HBOOT, I think I'll just need to buy a new SD card and put whatever the image it's looking for is on it?
Edit: I was thinking that reformatting the SD card (through a PC USB reader) as FAT32, then placing the PB99IMG.zip from the latest 2.3 HTC WWE RUU might work? I can't see any reason why not -- think the Desire is unbranded so no goldcard required.
Edit2: Still waiting on a new adapter, but was wondering why the RUU failed -- the file was RUU_Bravo_Froyo_Vodafone_UK_2.33.161.2_Radio_32.49.00.32U_5.11.05.27_release_157522_signed.exe from shipped-roms. Don't see any reason why flashing it would have ended up leaving me in this position -- even if it was a hardware issue underlying it.

Sorry to double post...
Tried putting the PB99img from the RUU (and tried the 2.3 update PB99img) to no avail on both the SD card that I'd been using recently and the one that had originally come with the phone -- no luck; once HBOOT detects the img and runs through it, it gets stuck at the "parsing... [1] [2] [3]" etc page.
Any help would be massively appreciated, would be appalled if I have managed to brick this in my enthusiasm for fixing a volume button problem -.-

Already checked bortak's troubleshooting guide?

Yep and anything else I could find really. Starting to think this little droid is doomed.

[Q] can someone Help with fixing my DINC after Unrooting gone wrong?

Ok, so have a serious issue
at first i was able to successfully root and flash clockwork mod recovery on my DInc using the rooting method from unrevoked 3 and was running Clockwork mod recovery +Cyanogen mod7 through the Rom manager (cannot remember exactly which versions.) it was all running fine, then just decided to unroot it with a few different methods (one didnt work and the others failed as well, maybe because i mismatched the stuff i used during the First try at the unrooting process..but because i tried one method after the other, and it was soo long ago, i forgot exactly how i ran into this problem
basically somehow i screwed up the Unrooting process.
SO now I am Having the System UIDs are inconsistent message every time i start my Incredible, Tried recovery that didnt work, tried factory reset+ erase all data on phone SD card (i probably accidentally erased the recovery image) it seems to reboot and be all restored, like a stock image, but weirdly the Superuser Ninja holding the AR15 still shows up in my app drawer (even after i unrooted and restored everything.) so i i decided to check out if the permissions were still enabled and they were not... SU shows up and doesnt function (just blank). I investigated further by downloading ROMmanager and then everything ended up forceclosing over and over again...I went to download "# Root Checker" and pressed "check" and it proclaims that its not rooted but under "User" it said "root"... i guess that its saying im rooted but im not?!?! LOL
anwhyo here are my DInc Specs as of Right now:
my DInc is an SLCD, running android 2.3.4. baseband is 2.15.10.07.07
Kernel 2.6.35.13-g03546aa
[email protected]#1
Fri Oct 7 10:52:52 CST 2011
software number 4.08.605.2
im still able to Access HBOOT and the screen says
*** UNLOCKED***
INCREDIBLE XD SHIP S-ON,
HBOOT-1.02.0000
MICROP 0417
TOUCH PANEL- ATMELC03_16ac
RADIO-2.15.10.07.07
DEC 21 2011,23:37:16
when i tried to see if i can reflash it through fastboot, the device manager in my W8.1 Pro 64 bit says "Device failed Enumeration" and USB notification popped up from the system tray saying that the device wasn't recognizable
so the drivers provided by Unrevoked for enabling the phone to be detected dont work, and the HTC Sync program doesnt even detect the Incredible.
However,,,,
the Fast boot, Boot Loader, and HBOOT still works upon pressing the Volume-down + Power and am still able to access Internal Phone Memory AND the SD card when the Phone is plugged into my computer via micro USB (so it looks like im able to flash things to it, but stuck as to how and what)
Because im still able to access the the SD card and internal Memory,
I tried putting PB31mg.zip on the root of the SD and ran HBOOT> and i gave it a second to detect the file.. then it said "Main Version is older Update Fail!"
the guy in this thread http://forum.xda-developers.com/showthread.php?t=1286223 seems to have had Similar problems..... I have added symtoms and issues on top of the whole 2.3.4 with S-on and Radio 2.15.10.07.07....
I just want to get back to vanilla-stock on my incredible with absolutely no modifications and without the System UID/feeling lucky pop up bugging me. and dont care what route i take, weather it be rerooting and reflashing , just reflashing. i just dont know what to do to get it that way from here.
Can anyone please help me figure out how to get back to normal with this DInc???
Im sorry if i dont make any sense im having a hard time explaining it. if you do understand me, i would appreciate your help. also if you need me to clarify things just ask me.

I'm a little rusty, but I remember this was the preferred method for rooting because of problem with the 1click unlockers,
(nuts, can't post links yet)... Google, "[HOW TO](gaining root)unlock,downgrade,and achieve s-off with htcDev" and look for it on androidforums.com
Try picking it up from step2, just keep the unlock_code.bin from miniadb_inc files from step1 on the phone. As long as typing 'adb devices' displays your phones serial number, you should be ok. As a long shot, you could try a PC with Windows7.

Try this ruu thru hboot http://dinc.does-it.net/Stock_Images/4.08.605.15/PB31IMG.zip

[Q] Desire Help!!

Hi Guys,
A lot of this stuff is new to me. I have an old HTC Desire which I hadn’t turned on in a while. When I tried to boot it up, it only got as far as the O2 splash screen. I know the basics so tried volume down and power button and got to the fastboot screen,
Bravo PVT4 Ship S-on HBOOT-0.93 0001 MicroP-051d Touch Panel SYNT0101 Radio-5.09.050.30_2 August 10 2010
Tried recovery but again stalled on the splash screen. Been looking through the forum, some great info there and the HTC Desire troubleshooting guide is very good. But I just don’t know exactly whats wrong with the phone as sometimes I get a stall on screen with white HTC, sometimes on O2 splash screen and one time it stopped with three android men in the middle of the screen.
I got myself a SD Adapter for the micro sd in my phone and copied/backup this info on my laptop. I’ve tried clearing all on the Micro sd and running a RUU but always comes up with the error cannot connect to pc (windows 7). Don’t mind losing all on the sd card as I have pics/videos on the laptop, just want to have the phone work again. Would ideally like to start from scratch and put the minimum amount of information needed on my microsd to boot up the phone correctly. I think there may be a chance as I can get to the hboot screen. Appreciate any help I can get
Regards

Well done for finding the troubleshooting guide and having a read in the first place, a lot of people don't bother!
If you just want it booting, try running the the 2.3.3 RUU using the PB99IMG,zip method, which doesn't require a PC connection.
- Download the .zip URL="http://d-h.st/d44"]here[/URL],
- Put it directly on the root of the sd card (not in any folder)
- Boot to bootloader (Vol down + power)
- It should find the file, select power to run it.

Cheers Eddie for getting back so quickly.
Just tried what you said but getting "wrong image or no image" briefly flashing
up on the screen when i select bootloader. I put the zip file itself onto the root of the sd card. Should i delete everything else
on the sd card?
Another thing i've noticed is that i get seven random vibrates every now and again when it HBOOT mode.
Thanks again Eddie

That's weird, should find the file.
Sorry have to double check:
- You didn't rename the file? You shouldn't have to modify the zip at all, should be named PB99IMG.zip and not PB99IMG.zip.zip
- It's definitely on the root of the sd card (not in a folder)
You shouldn't need to format it as it scans the whole card for the file, but no harm in trying if it's backed up. Reformat the sd card completely, to a single FAT32 partition. Put only the zip on there, try again.
If that still doesn't work, try it with another sd card.

Getting there!!
Ok i got my HTC to recognise the zip file. Problem was PB99IMG file was called zip.zip. Easy to miss
because on the root of the sd card it only has .zip but when i tried to copy it in again it asked me do
i want to replace PB99IMG.zip.zip with PB99IMG.zip.zip...
So Vol down and power button and HTC starts the process
Do you want to start update .....vol up
Updated Bootloader ok but
unfortunately for me it stalled while updating RADIO V2.... waited good 5 mins but did not progress
Disappointed as i thought i was nearly there. Has anybody any experience of this!
Eddie only seen your post after i put this one up. You were right with the naming of the file .zip.zip

Eddie only seeing your post now. you were right about the .zip bit, cheers.
Tried again and this time success, got all updated except Radio which gave a "fail PU"
Down the bottom in black it said "partition update fail"
Then i pressed vol up to reboot Htc turned off... and didn't reboot
Going to leave it at that for now and head to bed. Thanks for your help today
If you have any ideas i'll give it a go tomorrow:fingers-crossed:

Well progress is good the .zip.zip error is surprisingly common.
Does it say "RADIO V2 Fail" or similar?
This unfortunately is not a good sign, suggests a radio brick, or an overheating motherboad I believe. You're not the only one to see this error.
Try putting the desire in a bag in the freezer for a few minutes (not joking), the re-running the RUU same method.
This may get it to boot, but I fear that it won't be long before the same thing happens again and it gets stuck on the splash screen, no guarantees at this point with that error.

eddiehk6 said:
Well progress is good the .zip.zip error is surprisingly common.
Does it say "RADIO V2 Fail" or similar?
This unfortunately is not a good sign, suggests a radio brick, or an overheating motherboad I believe. You're not the only one to see this error.
Try putting the desire in a bag in the freezer for a few minutes (not joking), the re-running the RUU same method.
This may get it to boot, but I fear that it won't be long before the same thing happens again and it gets stuck on the splash screen, no guarantees at this point with that error.
Click to expand...
Click to collapse
Yeah "radio v2 fail" tried to run again but now won't turn on at all. Tried freezer...nothing and hasn't turned on since. I suspect your right with
motherboard over heating and i'm resigned to it being a lost cause.
Thanks for the help anyway Eddie