So I just flashed Decks which has a Cyan kernel. For some reason my phone doesn't seem to like when I try and flash anything that doesn't come with the ROM I flash.
I've tried multiple AOSP ones that support undervolting, no dice; will not even boot.
I clear cache before every attempt, no dice.
Any suggestions?
-Sent from my EVO in full derp mode.-
I'm not a 100% on what you said but if your trying to under volt an aosp kernel you can try sz 2.2.1 or tiamat they are the only 2 I use because I use the sbc versions but like I said I'm not that clear on what your question was.
Sent from my PC36100 using XDA App
linsalata28 said:
I'm not a 100% on what you said but if your trying to under volt an aosp kernel you can try sz 2.2.1 or tiamat they are the only 2 I use because I use the sbc versions but like I said I'm not that clear on what your question was.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Wow, re-reading my post I see autocorrect didn't do me any favors.
I've tried both SZ and Tiamat and I can't get either of them to run on my phone. After clearing cache I flash either of them and if I remember right SZ never gets past the white HTC screen before rebooting and Tiamat (if I'm lucky) will start to load my ROM before just locking my phone up.
It's important to clear cache and dalvik cache before flashing a new kernel. I use SZ 2.2.1 with CMod ... works great with interactive x governor. I don't undervolt, simply use 245/998, and haven't had any issues at all. Might give it a try ... good luck.
Try wiping cache & dalvik again after flashing the kernel. You can also try different versions, perhaps the versions of Tiamat & SZ that you used just don't like your phone.
Also, if you have SetCPU set to "set on boot", uncheck that option before flashing a new kernel.
Sent from my Evo + MIUI using Tapatalk!
wmdunn said:
It's important to clear cache and dalvik cache before flashing a new kernel. I use SZ 2.2.1 with CMod ... works great with interactive x governor. I don't undervolt, simply use 245/998, and haven't had any issues at all. Might give it a try ... good luck.
Click to expand...
Click to collapse
I do clear both. I reboot the phone and it either never loads the ROM or starts to load the ROM and locks up.
plainjane said:
Try wiping cache & dalvik again after flashing the kernel. You can also try different versions, perhaps the versions of Tiamat & SZ that you used just don't like your phone.
Also, if you have SetCPU set to "set on boot", uncheck that option before flashing a new kernel.
Sent from my Evo + MIUI using Tapatalk!
Click to expand...
Click to collapse
Tried wiping after kernel install, no dice. And I don't have "set on boot" checked.
Grrr, I don't get why my phone doesn't like flashing kernels. Maybe I'll move to a different recovery and try...
Tried RA - no dice. Now rather than locking up the phone just reboots constantly. That was Tiamat, going to try SZ...
Related
I was wondering what everyones experience with kernels have been before flashing it. Any suggestions?
Sent from my PC36100 using XDA App
I've been using the one that comes with gginggerbread 6. It's surprisingly smooth considering my phone usually doesn't like bfs kernels
For CM7 RC1 I use the .7 savaged-zen cfs havs kernel
For CM7 RC1 with WiMax [gingerbread 6], have to use the provided .37 kernel
I personally have been using the 0.0.5-0.0.9 Savage.zen kernal BFS HAVS SBC kernal with either CM7 RC1 CM7 RC1 + WiMax
nosympathy said:
I personally have been using the 0.0.5-0.0.9 Savage.zen kernal BFS HAVS SBC kernal with either CM7 RC1 CM7 RC1 + WiMax
Click to expand...
Click to collapse
No issues? Every time I try to use the kernel, my handcent force closes on me. Dx
using the 0.0.9...phones been on for 2 days 1 hour and 49 minutes
using the sprint extended battery, still at 45%
teh roxxorz said:
No issues? Every time I try to use the kernel, my handcent force closes on me. Dx
Click to expand...
Click to collapse
not a single force close. Been using the WiMax GB since it came out and have been using the savage.zen kernal since. I dk, but my phone seems to like BFS over CFS aswell. It will work will CFS but I get better battery life with BFS.
went from 32% battery to 18% in 1 day and 8 hours with this setup. I also have SetCPU set to Salvage.Zen
nosympathy said:
not a single force close. Been using the WiMax GB since it came out and have been using the savage.zen kernal since. I dk, but my phone seems to like BFS over CFS aswell. It will work will CFS but I get better battery life with BFS.
went from 32% battery to 18% in 1 day and 8 hours with this setup. I also have SetCPU set to Salvage.Zen
Click to expand...
Click to collapse
Interesting, I'll probably do a complete wipe eventually and restore stuff.
teh roxxorz said:
Interesting, I'll probably do a complete wipe eventually and restore stuff.
Click to expand...
Click to collapse
yeah when I flash a new rom, i wipe cache, delvik, boot, system, data, .android_secure.
boot the room, reboot to recovery, wipe cache and delvik and anroid secure, then flash the kernal, then boot, then reboot to recovery and wipe cache and delvik, and reboot and have fun.
nosympathy said:
yeah when I flash a new rom, i wipe cache, delvik, boot, system, data, .android_secure.
boot the room, reboot to recovery, wipe cache and delvik and anroid secure, then flash the kernal, then boot, then reboot to recovery and wipe cache and delvik, and reboot and have fun.
Click to expand...
Click to collapse
Yea, I normally do too, so I'll have fun.
I have been using the kernal packaged with CM7 and its been doing great. So well in fact I have been reluctant to try another one.
0.0.9 working great hardware 004
Sent from my PC36100 using XDA App
The toast kernel works great for me, better than the packaged kernel since I had slow 3G with that one, but cell standby is showing up as high percentage on the battery usage and I'm not getting the WiMax control settings.
admang said:
The toast kernel works great for me, better than the packaged kernel since I had slow 3G with that one, but cell standby is showing up as high percentage on the battery usage and I'm not getting the WiMax control settings.
Click to expand...
Click to collapse
I find that a lil' awkward since you're running a sense kernel on an aosp rom...but more power to ya.
I have started using the latest savaged and I am getting amazing battery life.
Sent from my PC36100 using XDA App
Why is that no matter what rom I flash with whatever RAM tweaks/kernel combo I try my homescreens and menus lag? I've followed other flashing guides, recommendations, etc. but nothing seems to help?
Did you try wiping cache and dalvik cache after the you flash the Rom and let everything load up?
Sent from my Gruesomes Rom using XDA App
Absolutely. I've even followed some rom flashing guides to get a clean install, but it's the same everytime. The only way I can get a smooth experience is by running the stock RUU on my computer.
Just to give you an idea of what I've tried:
CM7 stable and CM7 nightlies w/ tiamat kernel and w/ Juwe's ram script as well sometimes
MikG w/ stock kernel/ChopSuey/Freedom w/ and w/o ram script
SNS 1.6 and 1.7 with same kernels and same ram script on and off
Swag roms with same setups as above
list goes on and on
V6 supercharger is what I use on every Rom
Sent from my Gruesomes Rom using XDA App
V6 huh? Haven't tried that yet. Which options do you choose?
Edit: Wait yes I have tried this one... I get an error trying to reboot after running the script. I'm not sure if the values were set or not and I didn't notice ant performance changes. Was I doing something wrong?
sivarticus85 said:
V6 huh? Haven't tried that yet. Which options do you choose?
Edit: Wait yes I have tried this one... I get an error trying to reboot after running the script. I'm not sure if the values were set or not and I didn't notice ant performance changes. Was I doing something wrong?
Click to expand...
Click to collapse
What does the error say?
Sent from my Gruesomes Rom using XDA App
What kind of error?
Sent from my Gruesomes Rom using XDA App
The error says failed to reboot. After I do reboot I'm not sure if the values set are still there, and as I said before I didn't notice any performance increases.
I used the video tutorial below and it worked perfect.....
http://forum.xda-developers.com/showthread.php?t=1278783
I flashed tiamat kernel 4.1.0 at the same time i flashed decks new evo gingerbread rom. And its been working pretty good but its been freezing occasionally and also getting some force closes with youtube then rebooting. I'd like to try decks with the original kernel before i just go back to CM7. Should i just reflash the rom? Do i need to do a full wipe first?
JtCann said:
I flashed tiamat kernel 4.1.0 at the same time i flashed decks new evo gingerbread rom. And its been working pretty good but its been freezing occasionally and also getting some force closes with youtube then rebooting. I'd like to try decks with the original kernel before i just go back to CM7. Should i just reflash the rom? Do i need to do a full wipe first?
Click to expand...
Click to collapse
Just wipe cache and dalvik caches then flash the ROM.
Sent from my PC36100 using xda premium
The title says it all. I'm looking for a fast and completely stable ROM and kernel. I would really like something with superb battery life. All suggestions are welcome.
Cm7,salvagmod or decks 1.3
With tiamats 4.1.0
Sent from my PC36100 using xda premium
I like energy rom with chopsuey kernel
THREESTRIPEBRAND said:
Cm7,salvagmod or decks 1.3
With tiamats 4.1.0
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
CM7 is actually the 1st rom I flashed. I like it so far. So how is your battery life with CM7 and Tiamats 4.1.0
DoubleA319 said:
CM7 is actually the 1st rom I flashed. I like it so far. Where can I find tiamats 4.1.0
Click to expand...
Click to collapse
http://tiamat-dev.com/tiamat_evo/
Switch to Amon Ra recovery if you haven't, wipe cache and dalvik, flash and reboot
My favorite right now is MikG with the kernel that comes with it, stupendous battery life.
DoubleA319 said:
The title says it all. I'm looking for a fast and completely stable ROM and kernel. I would really like something with superb battery life. All suggestions are welcome.
Click to expand...
Click to collapse
My favorite right now is MIUI. I have found it to be very stable. It's an AOSP ROM, so it's already fast, and the Theming engine is top notch. I also love the fact that we see weekly updates. If there is a small hiccup one week, you can bet it will be fixed by the next. No 4G, but I don't live in a 4G area. I just use the stock kernel but there seems to be good success with both of the last two Tiamat releases. Downloads are at miui.us. Well worth a try!
Sent from my PC36100 using xda premium
tropicalbrit said:
http://tiamat-dev.com/tiamat_evo/
Switch to Amon Ra recovery if you haven't, wipe cache and dalvik, flash and reboot
My favorite right now is MikG with the kernel that comes with it, stupendous battery life.
Click to expand...
Click to collapse
I have TWRP recovery. That should be ok right? Is there a reason to choose one over the other?
DoubleA319 said:
I have TWRP recovery. That should be ok right? Is there a reason to choose one over the other?
Click to expand...
Click to collapse
I think you should be good for the most part. I've always used Amon Ra, it is extremely reliable in formatting and flashing and partitioning and all the good stuff. And it has support for both Amend and Edify scripting, while TWRP only has Edify support. Amend is older, but some people still use it.
But as long as TWRP works for you, use it by all means
Do any of you guys use SETCPU or any similar apps along with the kernels?
Sent from my PC36100 using XDA App
DoubleA319 said:
Do any of you guys use SETCPU or any similar apps along with the kernels?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Cyanogenmod and most other AOSP ROMs usually have built-in options in settings so SetCPU would be unnecessary. On MIUI and Sense ROMs, then you would need SetCPU, which I do use
Sent from my PC36100 using xda premium
Just to add to this, to further improve battery life try to underclock it, use like the conservative governor, and also undervolt with incredicontrol (app) or vipermod (script) o_0
I have used over 10 ROMs and all had their pros and cons. The one I found had the best battery life AND performance (this is what I use now):
Rom: EVO Deck 1.3 (flashed with google apps obviously)
Kernel: SalvagedZen 2.2.1 CFS + HAVS
Extras:
CoD supersonic tweaking 1.2 (speed things up for multitasking + battery life increase)
AdFree (for no ads)
LauncherPro as my launcher
Backup apps with titanium backup. Wipe data, cache, dalvik cache, boot, and system. Flash EVO Deck, then Gapps, then kernel. Boot it up and go through the setup process, but don't sign in to anything yet. Leave it for 10 minutes then reboot. Go to market and install launcherpro, adfree, titanium backup, and the apps needed for the CoD tweaking. Do the Cod tweaking and set up adfree. Reboot for those to take effect. Now restore you're apps and you're done!
tropicalbrit said:
http://tiamat-dev.com/tiamat_evo/
Switch to Amon Ra recovery if you haven't, wipe cache and dalvik, flash and reboot
My favorite right now is MikG with the kernel that comes with it, stupendous battery life.
Click to expand...
Click to collapse
If u are concerned about battery u should be wipeing/callibrateing every time u flash, you can do this by 1. Charge completely, 2. Wipe batterystats.bin file in amon ra, and POWER PHONE OFF, DO NO REBOOT! Let it charge till the orange light turns green, 3, unplug before you turn on, 4, leave on till dies, do not plug in. 5, charge to 100%, do not unplug, done!
I suggest u do this directly after ur first successfull boot after flashing
Sent from my PC36100 using Xparent Green Tapatalk
Ello guys.
My htc is freezing and reboot constantly, is rooted with ics 4.0.3 rom kang... please help me guys...
Sorry forma my bad english
Sent from my PC36100 using XDA App
Try wiping cache & dalvik cache then changing kernel. If that don't work, wipe everything except for sdcard then reflshing the rom.
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help
Wipe full everything cache and dalvik cache, reflash rom and nothing...
Sent from my PC36100 using XDA App
Maybe an application you have installed? Try a clean install without downloading apps.
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help
orgasmico said:
Wipe full everything cache and dalvik cache, reflash rom and nothing...
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
You tried a different kernel right?
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help
I was having the same problem with the Smartass govenor.
Change it in SetCPU to performance and see if that works.
xNotta said:
I was having the same problem with the Smartass govenor.
Change it in SetCPU to performance and see if that works.
Click to expand...
Click to collapse
my present kernel is tiamat 4.0... maybe other kernel ???? which kernel???
and not tested SetCPU i need try this...
I saw ur on ics right now there is only one kernel tiamat 4.1.0 modified so u need to try changing governers or install your apps one at a time from a clean install and find the culprit
We are legion, for we are many
Reboot
Does it reboot after a clean flash? or only after you load apps / restore data?
Like was stated:
Wipe Full
Wipe Cache
Wipe dalvik
Flash Rom
I had no reboot issues, just standard ICS bugs.
Maybe try to download again and then flash?
I'm flashing the Tom with indicate instructions but the reboot continue.
Although, changed the rom miui and run best, changed setcpu at performance and good... the reboot is less.
Only try change to kernel, Wich kernel improve my phone?
Tanks.guys
Sent from my PC36100 using XDA App
Hey,
Give it a full wipe "Data Davlik and Cache" and try flashing a differnt rom and see if that gives you any different result.
Did you flash a different kernel or are using any tweaks or mods OC or anything like that?
Because they have been known to cause reboots if not used right.
Stevo
Tanks for you opinion. With miui rom not reboot to much, I think that this rom is the best choice for me.
But with other kernel must be run best...
Sent from my PC36100 using XDA App