Has anyone replaced the usb on the dash?My brothers dash would disconnect if you look at it......very touchy...
Guitar100 said:
Has anyone replaced the usb on the dash?My brothers dash would disconnect if you look at it......very touchy...
Click to expand...
Click to collapse
You can check sticky's tutorial guide of how to take apart your dash http://forum.xda-developers.com/showthread.php?t=525869 if you want to literally see how you can remove your USB. But if you want anyother info you should be more specific in what help you are seeking in this forum.
Guitar100 said:
Has anyone replaced the usb on the dash?My brothers dash would disconnect if you look at it......very touchy...
Click to expand...
Click to collapse
My phone is the same way I believe it has to do with the connector coming loose. The way I fixed this is by holding the phone by the usb connector when plugged in instead of the phone. I hold the USB cable right by the the part you plug in and the weight of the phone will usually balance out and it will connect. My phone is very touchy also let me know if this has helped.
Eliphas said:
My phone is the same way I believe it has to do with the connector coming loose. The way I fixed this is by holding the phone by the usb connector when plugged in instead of the phone. I hold the USB cable right by the the part you plug in and the weight of the phone will usually balance out and it will connect. My phone is very touchy also let me know if this has helped.
Click to expand...
Click to collapse
Thanks Eliphas......i`ll try it.
Alright let me know how it works man, I hope all goes well.
i have the same issue, does anyone knows where to get the replacement parts ??
mbi0 said:
i have the same issue, does anyone knows where to get the replacement parts ??
Click to expand...
Click to collapse
You can look in ebay
all is good on the car end the cord works everywhere else i any ideas on what might have caused this
Sent from my PC36100 using XDA App
I think you accidentally your post...
I read it a few times, and i think what you're asking is...actually i have no idea. If you can elaborate, I may be able to help you.
Chopper64 said:
I think you accidentally your post...
I read it a few times, and i think what you're asking is...actually i have no idea. If you can elaborate, I may be able to help you.
Click to expand...
Click to collapse
First OFF, I am using a USB port in the car. The phone recognize being plugged in But wont Charge, I tried the typical Cig lighter Plug and i get the same result. Wall and Computer work fine.
I just received my replacement phone from Sprint. I go to boot it up and see that it is saying USB connected and just saying it over and over, like I am plugging it in and unplugging it. This was pure stock. I go to put Cyanogen Mod back on it and it actually stopped it for a while, but it keeps coming back occasionally. The only way to stop it is to plug a charger up to it and then it stops.
Thanks,
Jaculop
jaculop said:
I just received my replacement phone from Sprint. I go to boot it up and see that it is saying USB connected and just saying it over and over, like I am plugging it in and unplugging it. This was pure stock. I go to put Cyanogen Mod back on it and it actually stopped it for a while, but it keeps coming back occasionally. The only way to stop it is to plug a charger up to it and then it stops.
Thanks,
Jaculop
Click to expand...
Click to collapse
Go back to stock and bring it back to sprint... seems as though lots of these phones have been having this same issue... make sure no apps are installed at all when you bring it to them so they can't blame it on an app...
Sent from my SPH-D700 using Tapatalk
Ok, thanks. Glad I waited before swapping an invisishield out and having to do it again.
Sent from my SPH-D700 using XDA App
before you take it back...repartition it on odin also
LORDFIRE00 said:
before you take it back...repartition it on odin also
Click to expand...
Click to collapse
Lol that would bebringing it back to stock as I said...
Sent from my SPH-D700 using Tapatalk
i had this problem also, drives me crazy, The worst thing is this will eat my battery. All i can do is to hide the notification bar (possible if using adw launcher), but when i open an app, the notification bar appears again.
Done anything like back to stock ec05, repartition etc, etc. But now im on MTD and at first the problem with usb is still there, but now it is completely gone, wtf
It may be gunk in your USB port. Look inside with a magnifying glass.
kennyglass123 said:
It may be gunk in your USB port. Look inside with a magnifying glass.
Click to expand...
Click to collapse
i dont know, cleaned my port with thin damp cloth and push it using small stick, i even brush it using toothbrush with no result.
But recently it just go away itself
I had this problem when I first got my epic (bought it used on eBay). I tried blowing in the port and stuff. Eventually the problem went away and hasn't come back.
Sent from my SPH-D700 using XDA App
anyway, any of you with usb issues, did any of you happen to use non original battery ?
webslasher said:
i dont know, cleaned my port with thin damp cloth and push it using small stick, i even brush it using toothbrush with no result.
But recently it just go away itself
Click to expand...
Click to collapse
uh, not to scare you or anything, but you don't clean any ports on a cell phone with a damp cloth, it will do harm to it. take a toothbrush that has never been used before and gently brush the port. then blow into the port to remove debri (small particles), then try it.
webslasher said:
anyway, any of you with usb issues, did any of you happen to use non original battery ?
Click to expand...
Click to collapse
Yes, epic touch 1800mah. Also happened right after installing cm9 alpha0
Sent from my CM7.2 OG Epic
I'm having this issue while trying to get my phone back to stock so i can sell it. It just wont connect on odin, just connected and disconnects over and over... I already have another phone on my service. is there a way to get to stock without using a USB cable? Like, flash to older rom, and get an OTA? can i do that without the phone on my contract?... ive been searching for answers all night... I got it un bricked so far, and im on stock EH06 right now.
LORDFIRE00 said:
uh, not to scare you or anything, but you don't clean any ports on a cell phone with a damp cloth, it will do harm to it. take a toothbrush that has never been used before and gently brush the port. then blow into the port to remove debri (small particles), then try it.
Click to expand...
Click to collapse
yes, i know, just taking desperate measure lol, this thing just made me lost my patience
xopher.hunter said:
Yes, epic touch 1800mah. Also happened right after installing cm9 alpha0
Sent from my CM7.2 OG Epic
Click to expand...
Click to collapse
i'm trying to isolate the problem,
interesting thing is, i found when i plug a mini-usb to micro usb converter (just the converter, not connected to anything), the notification seems stopped, but when i unplug the converter, it shows again.
webslasher said:
yes, i know, just taking desperate measure lol, this thing just made me lost my patience
i'm trying to isolate the problem,
interesting thing is, i found when i plug a mini-usb to micro usb converter (just the converter, not connected to anything), the notification seems stopped, but when i unplug the converter, it shows again.
Click to expand...
Click to collapse
Then you must have pins touching and when you plug something in it straightens them out.
Sent from my SPH-D700 using XDA App
kennyglass123 said:
Then you must have pins touching and when you plug something in it straightens them out.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
but when i plug normal micro usb cable, it has no effect,
any tips to repair bent pin ?
webslasher said:
but when i plug normal micro usb cable, it has no effect,
any tips to repair bent pin ?
Click to expand...
Click to collapse
Ok that is strange. Maybe there is gunk in the micro usb cable as well.
Sent from my SPH-D700 using XDA App
webslasher said:
yes, i know, just taking desperate measure lol, this thing just made me lost my patience
i'm trying to isolate the problem,
interesting thing is, i found when i plug a mini-usb to micro usb converter (just the converter, not connected to anything), the notification seems stopped, but when i unplug the converter, it shows again.
Click to expand...
Click to collapse
Sent you a PM
Sent from my SPH-D700 using Tapatalk
kennyglass123 said:
Ok that is strange. Maybe there is gunk in the micro usb cable as well.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
seems not, i use the cable to charge my Desire HD with no problem..
I'm opening the converter apart, it is just mini-usb 2 cables soldered to the maybe VBUS and ground micro usb, so this is a charger cable, the data pin was shorted, maybe this is why the notification stopped ?
USB Connected message issue fix
My SPH D700 Epic 4G from Sprint started having this issue, I finally fixed it by turning off USB Debugging mode (uncheck it unless your using it).
whala! no more USB Connected annoyance!
Worked on my phone, let me know if this fixes it on yours!
Have Fun, and Happy Holidays!
The Guru
After tried to work to unlock my phone, it does not recognise USB at all, even to charge the battery.
Soon, my battery will go to zero and my phone will not work.
What could be wrong?
Phone does not charge with the wall charge.
Please, help me!
eduardosmelo said:
After tried to work to unlock my phone, it does not recognise USB at all, even to charge the battery.
Soon, my battery will go to zero and my phone will not work.
What could be wrong?
Phone does not charge with the wall charge.
Please, help me!
Click to expand...
Click to collapse
What did you do?
Did you try a different cable ?
Try a different cable. If that doesn't work go get a pogo dock or rig up ur own. There are DIY for that. If those don't work, idk what to tell ya. Warranty it?
Sent from my Galaxy Nexus using xda premium
Drakkula4 said:
Try a different cable. If that doesn't work go get a pogo dock or rig up ur own. There are DIY for that. If those don't work, idk what to tell ya. Warranty it?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thank you very much, guys!
I was updating the phone and - I don't know how - cable got useless.
I thought my phone got bricked.
Really, a new cable fixed the problem.
Thanks again.
It was very nice know you help desperate people.
Would this work with the HTC One? http://www.amazon.com/Micro-Cable-P...=UTF8&qid=1385609474&sr=8-13&keywords=usb+otg
If you get it let us know. It may need something enabled in the kernal to accept power while in OTG mode but I'm not sure
Comet1966 said:
Would this work with the HTC One? http://www.amazon.com/Micro-Cable-P...=UTF8&qid=1385609474&sr=8-13&keywords=usb+otg
Click to expand...
Click to collapse
RLKirk said:
If you get it let us know. It may need something enabled in the kernal to accept power while in OTG mode but I'm not sure
Click to expand...
Click to collapse
I just purchased this same device and can yes it works just like any other USB OTG cable but it will not charge your phone or at least I couldn't get it to charge.
klbjr said:
I just purchased this same device and can yes it works just like any other USB OTG cable but it will not charge your phone or at least I couldn't get it to charge.
Click to expand...
Click to collapse
Makes sense. Thanks fir the enlightenment. Maybe since kernels are starting to come out one of the devs can figure out of a way around it
RLKirk said:
Makes sense. Thanks fir the enlightenment. Maybe since kernels are starting to come out one of the devs can figure out of a way around it
Click to expand...
Click to collapse
I've read comments from people with other phones that say it does charge their phones but I couldn't get it to do anything with my ONE. Now I did read somewhere that while it is plugged in the USB device is powered by the adapter and not the ONE so you can save some battery life but I haven't done any tests to verify or deny that theory.
Did you use the pc to charge or ac adapter?
Sent from my HTC6500LVW using Tapatalk
i think it's used to power the usb device. and it's very useful for device which doesn't support otg natively like nexus4
OK I can confirm that it does charge the device, just not mine, it charges the RAZR M, it will charge the one in recovery and when its off. But the storage doesn't show in recovery. When I have it plugged in while its on the OTG works and when I unplug it from the phone, it says its charging via USB. I'm no dev so I have no idea how I would get this to work.
Charging will work in recovery but not in boot as the phone will be picked as an otg device