I am trying to install the Fasty ROM and I need to revert to Recovery 2e, I saw the other forum for it, but my build number is UCKB2 and I can't seem to find the right way to do it, can anyone help? By the way I tried to post to the recovery 2e discussion and I couldn't post there, to nooby! Thanks in advance!
Same problem
I've rooted and downloaded rom manager but everytime I try to reboot into recovery I keep getting the E:failed to verify whole-file signature
I too have uckb2 build and am not sure which CT root or whatever to download. Yes I'm a complete noon but I've had two friends with rooted and Tom flashed phones who can't figure it out either. [email protected]
Noob*-rom*
Sent from my SAMSUNG-SGH-I897 using XDA App
Look in the Captivate developers section. There is a very good guide on how to get around that.
Headed there now. Thanks for the help.
Sent from my SAMSUNG-SGH-I897 using XDA App
I think I found the one you were talking about and yes, it is VERY detailed and informative. Thanks a bunch. Now I just need to get to my PC to do it LOL.
Edit: Well that didn't go as planned. Couldn't find exactly what I was looking for. Want to flash kb1 kernel but not sure where to find the thread for that. Maybe I should give up.
Sent from my SAMSUNG-SGH-I897 using XDA App
I was able to do the modded 3e recovery on the KB2 build, just use trusselo's .bat file, worked like a charm! When you go to load CWM, it might not work the first time, you will have to clear the cache first and then re-install packages and it will work!
outdoorsman14 said:
I was able to do the modded 3e recovery on the KB2 build, just use trusselo's .bat file, worked like a charm! When you go to load CWM, it might not work the first time, you will have to clear the cache first and then re-install packages and it will work!
Click to expand...
Click to collapse
With CWM, you almost always have to resinstall packages twice.
So I just downloaded sgs kernel flasher and flashed speedmod kernel and that was that. It was that simple. Thanks.
Sent from my SGH-I897 using XDA App
Timpdottm said:
So I just downloaded sgs kernel flasher and flashed speedmod kernel and that was that. It was that simple. Thanks.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Dang, I haven't seen a speedmod kernel in forever.
Related
So I finally got the guts to go forward with rooting, which I did, and seemed to go well. I have superuser and rom manager on the phone, and I also followed the steps in the thread:
http://forum.xda-developers.com/showthread.php?t=798067
I can boot into CWM with no problems, and I have the Syndicate Frozen Rom as well as the Frankenstein Rom on my SD Card.
I chose to install the Syndicate ROM first, and it goes through the install process no problem, but when I select "reboot system" it either goes to the Samsung start screen and never boots, or, now, it is giving me an message that says
E: Can't open /cache/recovery/log
What did I do wrong???
Xiutehcuhtli said:
So I finally got the guts to go forward with rooting, which I did, and seemed to go well. I have superuser and rom manager on the phone, and I also followed the steps in the thread:
http://forum.xda-developers.com/showthread.php?t=798067
I can boot into CWM with no problems, and I have the Syndicate Frozen Rom as well as the Frankenstein Rom on my SD Card.
I chose to install the Syndicate ROM first, and it goes through the install process no problem, but when I select "reboot system" it either goes to the Samsung start screen and never boots, or, now, it is giving me an message that says
E: Can't open /cache/recovery/log
What did I do wrong???
Click to expand...
Click to collapse
flash a kernel
Are u rfs or ext4
Sent from my SPH-D700 using XDA Premium App
Esteway.619 said:
Are u rfs or ext4
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Sorry, I guess I don't know what this means.
watch qbking77 vids in general section( sticky) it will help you alot
do you know how to use odin?
ilostmypistons said:
watch qbking77 vids in general section( sticky) it will help you alot
Click to expand...
Click to collapse
Absolutely right. qbking took what randyshear used to do to a whole other level. He has a video for everything you would possibly want to do.
Sent from my SPH-D700 using XDA Premium App
ok, I will check it out and see if he has what I need!
so thanks to qbking77 and Odin I was able to get my phone back to the stock epic, and now I am trying to flash SFR again.
The question now is how long does it usually take for a new ROM to boot once you have installed it?
Xiutehcuhtli said:
so thanks to qbking77 and Odin I was able to get my phone back to the stock epic, and now I am trying to flash SFR again.
The question now is how long does it usually take for a new ROM to boot once you have installed it?
Click to expand...
Click to collapse
If you are hanging at Samsung screen I would try flashing the ROM, then a kernel like Genocide, then reboot. This helped a couple of other people recently. I believe some ROMs have root in the ROM and some in the kernel. I may be wrong here but when I suggested this to others, it worked.
Sent from my SPH-D700 using XDA Premium App
Did you download the version of SRF that's just the Rom and doesn't have Twilight attached to it? I think there's still 2 links in there.
ok, so I have to DL the SRF and the Twilight Kernel?
That's probably what I did wrong because I understood from the guide that the ROM has both the Kernel and the Shell in it.
So is flashing a Kernel essentially the same as flashing the ROM? I just choose "install from Zip"? And if so, which do I need to install first?
Yes just dwnload it from my signature
Xiutehcuhtli said:
ok, so I have to DL the SRF and the Twilight Kernel?
That's probably what I did wrong because I understood from the guide that the ROM has both the Kernel and the Shell in it.
So is flashing a Kernel essentially the same as flashing the ROM? I just choose "install from Zip"? And if so, which do I need to install first?
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA App
Turns out it was the CWM version. Updated that, flashed the kernel and am now running SRF!
Thanks for all your help!
Sent from my SPH-D700 using XDA App
Got it! Turns out it wouldn't work with CWM 2.x. Updated to the newer version and it worked right away.
From SFR Epic with love
Congrats glad you got it all figured out. Whats next EF02 roms? Im lovin them especially Marusants give it a shot
Xiutehcuhtli said:
E: Can't open /cache/recovery/log
What did I do wrong???
Click to expand...
Click to collapse
This is the error you get when you are on the wrong version cwm and not converted to ext4.
tazfanatic said:
This is the error you get when you are on the wrong version cwm and not converted to ext4.
Click to expand...
Click to collapse
Good to know. So from here I can flash ROMs so long as I flash the corresponding Kernel first?
I have been trying to update to the ACS custom recovery 1.0.0.4 but every time i try this in the ACS updater application it starts to download zImage, then gets to 99% and reboots my phonne. It doesnt go into recovery from there and the same version of CWM i was using is still the recovery system.
This has happened across 3 different roms i was trying (acs srf 1.2, and ERA rom, and bamboozle 1.1)
I would like to know iof this is a known issue, how i can get this work work, and if there is a flashable zip that i can use to install the custom recovery myself.
Interesting. I have been testing the recovery for like 2 months. I just thought it was labeled wrong because I am on 1.0.0.3. Let me try to get some info
Sent from my SPH-D700 using xda premium
Any info? It just downloads "zImage" to my sd card.
Sent from my SPH-D700 using xda premium
ac16313 said:
Any info? It just downloads "zImage" to my sd card.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
The person I asked didn't get back to me. Let me try again. It seems like most of the team hasn't been on here lately so I will hit some people up on G-Talk
Sent from my SPH-D700 using xda premium
JohnCorleone said:
The person I asked didn't get back to me. Let me try again. It seems like most of the team hasn't been on here lately so I will hit some people up on G-Talk
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Cool stuff thanks!
It appears I am having the same issue. Gets to 99%, reboots, and I still have cwm 3.1.0.1 on 3 finger and through acs app.
jeffro18 said:
It appears I am having the same issue. Gets to 99%, reboots, and I still have cwm 3.1.0.1 on 3 finger and through acs app.
Click to expand...
Click to collapse
Same here gets to 99 % reboots & nothing what's up with a flashable
Zip?
Sent from my SPH-D700 using XDA App
Hey guys, I'm looking into this issue now. Not sure what caused it to just stop working.... I'll get back to everyone when I have an answer.
As for the zImage file - that's the recovery. It downloads into to your sdcard, then uses bmlwrite to write it, and then reboots.
parabola949 said:
Hey guys, I'm looking into this issue now. Not sure what caused it to just stop working.... I'll get back to everyone when I have an answer.
As for the zImage file - that's the recovery. It downloads into to your sdcard, then uses bmlwrite to write it, and then reboots.
Click to expand...
Click to collapse
Thanks for the response. This recovery is the only one that has never failed on me so I hope people get to take advantage of it ASAP. I have been testing it for 6+ weeks or so and its the first thing I put back on my phone after rooting.
Sent from my SPH-D700 using xda premium
Fixed!
JohnCorleone said:
Thanks for the response. This recovery is the only one that has never failed on me so I hope people get to take advantage of it ASAP. I have been testing it for 6+ weeks or so and its the first thing I put back on my phone after rooting.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Alright, great news everyone - got it fixed. Just uploaded to the market, give it time to reach you. Version is:
(Free) 1.5.0.3
(Donate) 1.5.1.3
I apologize for the issues... not sure how it went so wrong when it worked in testing.... I tested both versions though, all is good.
By the way -
I was able to do the following:
ODIN to stock
Root with One-Click
Here's the best part - even if your one-click does NOT install a custom recovery - you can still install it from the app. After I did ODIN / root, did not have to touch computer at all.... Installed recovery, then kernel, then rom, all from app.
Once again, I apologize for the issues.
parabola949 said:
Hey guys, I'm looking into this issue now. Not sure what caused it to just stop working.... I'll get back to everyone when I have an answer.
As for the zImage file - that's the recovery. It downloads into to your sdcard, then uses bmlwrite to write it, and then reboots.
Click to expand...
Click to collapse
Thanks for the heads up, and information!
So does this have any compatability issues?
Sent from my SPH-D700 using xda premium
ac16313 said:
Thanks for the heads up, and information!
So does this have any compatability issues?
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
After it installs, make a new nandroid backup. I found huge errors when restoring a 3.1.0.1 backup under the new recovery.
Testing now. Uhhh, I can't seem to 3 finger into recovery at all. And now it won't boot at all. Time for some special odin time....
Expect a how to video as well
I have 1.5.03 and still out failed
Sent from my SPH-D700 using XDA App
mottipython said:
I have 1.5.03 and still out failed
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Same here.
Sent from my SPH-D700 using xda premium
parabola949 said:
Alright, great news everyone - got it fixed. Just uploaded to the market, give it time to reach you. Version is:
(Free) 1.5.0.3
(Donate) 1.5.1.3
I apologize for the issues... not sure how it went so wrong when it worked in testing.... I tested both versions though, all is good.
By the way -
I was able to do the following:
ODIN to stock
Root with One-Click
Here's the best part - even if your one-click does NOT install a custom recovery - you can still install it from the app. After I did ODIN / root, did not have to touch computer at all.... Installed recovery, then kernel, then rom, all from app.
Once again, I apologize for the issues.
Click to expand...
Click to collapse
I just saw this thread, but I have ACS Updater (Donate version 1.1) - I only use it for backup and restore and it works perfect - I don't understand this "stops at 99%" thing, but now you guys got me scared to update to the newest version.
One thing that is strange, I had to look up acs updater in the Market Place before I found you could update it - the Market Place never gave me a notification that there was an update until I saw this thread
mouseglider said:
I just saw this thread, but I have ACS Updater (Donate version 1.1) - I only use it for backup and restore and it works perfect - I don't understand this "stops at 99%" thing, but now you guys got me scared to update to the newest version.
One thing that is strange, I had to look up acs updater in the Market Place before I found you could update it - the Market Place never gave me a notification that there was an update until I saw this thread
Click to expand...
Click to collapse
We are talking about trying to install the acs recovery inside the acs updater app.
Sent from my SPH-D700 using xda premium
just to reiterate, this issue is not resolved...
The Root said:
After it installs, make a new nandroid backup. I found huge errors when restoring a 3.1.0.1 backup under the new recovery.
Testing now. Uhhh, I can't seem to 3 finger into recovery at all. And now it won't boot at all. Time for some special odin time....
Click to expand...
Click to collapse
I didn't have this problem I installed ACS Recovery & restored a backup I made earlier with cwm a week ago & everything great! I like the blue in the recovery a little change from the purple which was also nice thanks ACS Team!! Oh my roommate has the evo I told him to instal this but he's scared that it will brick his phone I told him it won't just to make sure so he can see this is it ok for him to have this acs recovery? Thanks for any help I will give you a flower lol!hahaha
Super SRF 1.2/Genocide 2.0 OC 1.4GHZ/Honeycomb Fusion v 1.1
This issue has yet to be resolved. The acsupdater still reboots my phone at 99% . Still no flashble zip yet either.
Sent from my SPH-D700 using XDA App
EDIT:
1.EC09 Deodexed System Rom only, must flash over stock EC09. No Radio or Kernel included. Only scripts to Root and install busybox.
[EC09_Stock deodexed root+busybox.
exported from nandroid. full deodex and rooted in kitchen.
full system intact [bloat etc.]
Must have EC09 running.
reboot cwm recovery
wipe cache and dalvik
flash EC09_STOCK_DEODEXED.zip
reboot...
Now you can pull files to edit and theme. Using the tools found in theme section.
I did release initial ics theme for ec09 in my themes thread.
Beat me to it. Tried to flash mine last night and it wouldn't get past samsung logo. Gotta go back in and fix it. Oh well.
Sent from my SCH-I400 using Tapatalk
Txwolf1980 said:
Beat me to it. Tried to flash mine last night and it wouldn't get past samsung logo. Gotta go back in and fix it. Oh well.
Sent from my SCH-I400 using Tapatalk
Click to expand...
Click to collapse
Can you find radio and kernel for fladhing?
Sent from my SCH-I400 using xda premium
ciscogee said:
Can you find radio and kernel for fladhing?
Sent from my SCH-I400 using xda premium
Click to expand...
Click to collapse
I've got the kernel. Still looking for the command for radio
Sent from my SCH-I400 using Tapatalk
ahh you beat me to it too, lol. i was up all night working on this but i could not find a command to extract the modem.bin file and i searched like over 100 threads with no luck. But i do have the kernel file already. So far i have the rom deodexed and zipaligned. Heimdall and odin file.
finally a post at last lol. when u get the kernal and radio going ill be testing it out for sure and ive always wondered is there a change log somewhere that shows the changes from eco7 to eco9
Confirmed to root stock kernel by one member. Anyone else? If u want to debloat yourself by opening zip with 7zip and delete apks you don't want.
There will be more roms up soon. Not only by me. Stop in irc to see what's new.
Sent from my SCH-I400 using xda premium
These files saved my life,lol thanks
Sent from my SCH-I400 using Tapatalk
Confirmed root stock kernel...
Shameless bump! My PC is still packed away. Still gonna be a week maybe before I get settled. Hope all is well on ec09 guys/gals
Sent from my SCH-I400 using xda premium
Getting this back up since this its a great start. Should we put this in the sticky?
Txwolf1980 said:
I've got the kernel. Still looking for the command for radio
Click to expand...
Click to collapse
Hi,
I have some n00b questions that I would really appreciate some help on...
1. What is the significance of "No radio or kernel included."?
2. Why do I need these to move from EC09 Odexed >> EC09 Deodexed?
3. Where are these files? Can someone link me to them?
4. When I get them, how do I flash them in conjunction with the EC09_STOCK_DEODEXED.zip?
Thank you for taking the time !
firstand said:
Hi,
I have some n00b questions that I would really appreciate some help on...
1. What is the significance of "No radio or kernel included."?
2. Why do I need these to move from EC09 Odexed >> EC09 Deodexed?
3. Where are these files? Can someone link me to them?
4. When I get them, how do I flash them in conjunction with the EC09_STOCK_DEODEXED.zip?
Thank you for taking the time !
Click to expand...
Click to collapse
What ROM are you currently running? If you're already on EC09, your task is simple; go in to CWM and flash the deodexed ROM.
No radio or kernel means you need to already be on EC09 before flashing this EC09 deodexed ROM.
The easiest way (in my opinion) to get the radio and kernel you need for EC09 would be to back up any data you'd like to keep (apps, texts, contacts, etc), revert back to stock DL17, do the OTA to get up to EC09, and then flash the deodexed EC09 linked in the OP through CWM.
Epic Touch Blog: Temporary Stock E4GT from emmc
Utility for CM9 Epic Touch
This is a temporary ROM that boots Samsung's Gingerbread EL29 firmware entirely from emmc without making any changes to the ROM currently installed on your phone. When you reboot, you return to recovery where you can re-flash the ROM to return to CM9. This temporary ROM is useful for several purposes.
Update Profile.
Update PRL.
Sprint Activation.
Dial codes and diagnostic mode.
This should be helpful to users of any AOSP-based ROM including CM9, AOKP, etc.
Thanks to noobnl and mkasick for making this possible!
Really nice thanks a lot.
Awesome can't wait to test it out
Sent from my SPH-D710 using Tapatalk
. This will come in hand
Sent from my SPH-D710 using XDA Premium App
wilderckw said:
. This will come in hand
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
Its a great tool and easy to use. Was testing earlier today.
Sent from my SPH-D710 using Tapatalk
Would this work to flash .zip updates (such as kobridge) or updated ROMs (such as alpha5)?
This definitely will come in handy, can I suggest seeing if you can get a video made of how it works. I can honestly say It seems to help out quite a bit in this forum for a lot of people and does cut down on the crazy questions.
Great job though!
bobjase said:
Would this work to flash .zip updates (such as kobridge) or updated ROMs (such as alpha5)?
Click to expand...
Click to collapse
You can use the directbootCWM file to update CM9 yes. Not sure about using it for Kobridge tweaks.
playya said:
This definitely will come in handy, can I suggest seeing if you can get a video made of how it works. I can honestly say It seems to help out quite a bit in this forum for a lot of people and does cut down on the crazy questions.
Great job though!
Click to expand...
Click to collapse
Maybe qbking can make one for those who need it.
Sent from my SPH-D710 using Tapatalk
I'm sorry but what does this do?
Sent from my SPH-D710 using XDA
m0j09987 said:
I'm sorry but what does this do?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Its for AOSP roms. You currently can't update PRL/Profile, activate your device, or use dialer codes on them so this temporarily allows you to boot stock el29 off the SD card without changing your current rom. You can do what i said from there. Saves you time from doing backups, restoring, etc.
Sent from my SPH-D710 using Tapatalk
I'm hoping that someone can help me out as I am unable to boot into the temporary ROM. Here are the steps I followed:
1. I have everything extracted to emmc as directed.
2. I flashed directboot CWM utilizing mobile odin which correctly booted me into CWM version 5.0.2.7
3. I flashed boot_EL29.zip at location /emmc/multiboot/EL29 and received the following messages that appear to be correct.
Finding Update Package...Opening Update Package...Installing Update...Boot /emmc/multiboot/EL29/zImageCreate mount symlink.Remount partitions read-only.(Re)mount /emmc read-only.Unpack kexec.Load zImage and initramfs.Sync.Reboot into zImage.Install from sdcard complete.4. At this point I expected the phone to reboot into the temporary rom; however, it just shows the standard recovery menu. No reboot occured.
5. Because no automatic reboot occured, I selected "reboot system now" from CWM. Unfortunately this just brings me back into directboot CWM.
Thanks in advance for any help provided.
I am having the same problem I thought it could have been the downloading or unpacking so I downloaded it again and unpacked it and still have the same problem.
smmlee said:
I'm hoping that someone can help me out as I am unable to boot into the temporary ROM. Here are the steps I followed:
1. I have everything extracted to emmc as directed.
2. I flashed directboot CWM utilizing mobile odin which correctly booted me into CWM version 5.0.2.7
3. I flashed boot_EL29.zip at location /emmc/multiboot/EL29 and received the following messages that appear to be correct.
Finding Update Package...Opening Update Package...Installing Update...Boot /emmc/multiboot/EL29/zImageCreate mount symlink.Remount partitions read-only.(Re)mount /emmc read-only.Unpack kexec.Load zImage and initramfs.Sync.Reboot into zImage.Install from sdcard complete.4. At this point I expected the phone to reboot into the temporary rom; however, it just shows the standard recovery menu. No reboot occured.
5. Because no automatic reboot occured, I selected "reboot system now" from CWM. Unfortunately this just brings me back into directboot CWM.
Thanks in advance for any help provided.
Click to expand...
Click to collapse
I what having this same issue. There is a different version of direct boot, v3 that you have to use for this.
Sent from my SPH-D710 using Tapatalk 2
All I see is v1 up on the e4gtcm site. Where did you obtain v3 from?
Worked with V3 direct boot Thanks
---------- Post added at 03:35 PM ---------- Previous post was at 03:34 PM ----------
just click on the direct boot link and it will bring you to the V3
smmlee said:
All I see is v1 up on the e4gtcm site. Where did you obtain v3 from?
Click to expand...
Click to collapse
Nevermind. I found the v3 update. Thanks all!
Anymore questions don't be afraid to ask.
Sent from my SPH-D710 using Tapatalk
This sounds pretty cool and I would like to test it... what I don't understand is when I'm done with the temp rom, how do I get back to AOKP? Do I need to reflash the whole AOKP rom? Just the kernel?
epdp14 said:
This sounds pretty cool and I would like to test it... what I don't understand is when I'm done with the temp rom, how do I get back to AOKP? Do I need to reflash the whole AOKP rom? Just the kernel?
Click to expand...
Click to collapse
When done updating prl/profile, etc. Just reboot your phone and it will take you back to cwm recovery. From there you can either just reflash the rom or just a compatible kernel so it boots.
Sent from my SPH-D710 using Tapatalk
excellent. this could also help people do the gb GPS fix.. sweet man.
I am trying to upgrade my Virgin ROM to the 9.12 build but get a fail upon trying to flash it. The background.... I'm using TWRP recovery and have tried the chainfire root method. Here are the results:
As you can see you can see some conflicting information... all shots were taken in sequence. I'm thinking the fail in twrp is coming from the system not having root but the info is telling me otherwise....
Bump... Anybody???
Sent from my GT-I9505G using xda app-developers app
th3h0ff said:
Bump... Anybody???
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
Do you have the latest SuperSU version?
I'm a little lost at what you are saying.
You flashed a rom, and it said fail, and you think it has to do with Root?
If you have TWRP installed it doesn't matter if you are rooted or not. It's going to over right the system partition regardless if you have root or not.
So it's either a bad download or bad transfer for it to fail.
Sent from my SGH-M919 using Tapatalk 4
I do have the latest SU version by chain fire. And maybe I'm doing something wrong the because I am running the virgin gpe ROM now and that flashed in twrp with no issues. Now when I go to install (after wiping) and select the 9.12 update that I downloaded it hangs on trying to open the zip and fails... I haven't changed any twrp settings but in the write options of twrp what boxes should be checked because system is not by default... Thanks for the replies!
Sent from my GT-I9505G using xda app-developers app
I previously only used cwm so I'm not sure if I should just try that or what... And I've checked the download and md5 for verification
Sent from my GT-I9505G using xda app-developers app
th3h0ff said:
I previously only used cwm so I'm not sure if I should just try that or what... And I've checked the download and md5 for verification
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
You can give CWM a try, I've been using it for a while without any issues. Out of curiosity what version if TWRP you are using? I think most people recommend TWRP 2.5.0.2. I'm using the latest version of CWM.
Sent from my GT-I9505G using xda app-developers app
If all else fails, just start from scratch, get stock UVUAMDL tar, flash it with Odin, make sure to do a factory wipe after you flash it, sometimes bootloops occur if you don't. You don't even have to go past the first screen where you pick the language. Just shut it down from there and boot into download mode and root with Chainfire with Odin, then shut down and boot up again into download mode again and flash custom recovery tar of ur choice with Odin. Then download whatever custom rom zip and install it via custom recovery.
norml said:
If all else fails, just start from scratch, get stock UVUAMDL tar, flash it with Odin, make sure to do a factory wipe after you flash it, sometimes bootloops occur if you don't. You don't even have to go past the first screen where you pick the language. Just shut it down from there and boot into download mode and root with Chainfire with Odin, then shut down and boot up again into download mode again and flash custom recovery tar of ur choice with Odin. Then download whatever custom rom zip and install it via custom recovery.
Click to expand...
Click to collapse
Thanks again to everyone... not going to have time to mess with it tonight but I'll update tomorrow. Thanks again
th3h0ff said:
Thanks again to everyone... not going to have time to mess with it tonight but I'll update tomorrow. Thanks again
Click to expand...
Click to collapse
heyyy saw your reply in my thread.
just as @byron1985 suggested there, it sounds like you got a bad download. the flashing scripts are essentially exactly the same from previous version. the flashing process has absolutely zero to do with SuperSU.
edit: re-read. so you've verified the download. if you had success with CWM previously, i would go back to that. i do not use TWRP.
mrvirginia said:
heyyy saw your reply in my thread.
just as @byron1985 suggested there, it sounds like you got a bad download. the flashing scripts are essentially exactly the same from previous version. the flashing process has absolutely zero to do with SuperSU.
edit: re-read. so you've verified the download. if you had success with CWM previously, i would go back to that. i do not use TWRP.
Click to expand...
Click to collapse
Im going to give the twrp 2.5.2 a try as it seems most of my troubles keep happening on the 2.6.3 build. Hopefully that works either way its back to CWM for me as well. Thanks again for taking the time to help out and again sorry about hijacking the thread for a page... Your ROM is absolutely perfect so I appreciate the efforts and time!,
Andrew
SOLVED... tried 2.5 version of TWRP and all went well... odd but apparently my device doesnt like 2.6 versions of TWRP! Thanks to everyone who helped me out and gave me suggestions and thank you to the dev for taking some of his time to assist! It was a great help to me!
th3h0ff said:
SOLVED... tried 2.5 version of TWRP and all went well... odd but apparently my device doesnt like 2.6 versions of TWRP! Thanks to everyone who helped me out and gave me suggestions and thank you to the dev for taking some of his time to assist! It was a great help to me!
Click to expand...
Click to collapse
Good to know you are out of trouble
Sent from my Nexus 10 using xda app-developers app
See you shoulda said you were running 2.6.3 lol
word of advice (and to all who run twrp)
DO NOT RUN ANYTHING GREATER THAN 2.5.2!!!!!!!!!!!!!!