I read the thread
http://forum.xda-developers.com/showthread.php?t=715485
I've downloaded the combo file and flash zip via cwm and reboot.
but after checking the baseband does not change.
Rom CM7 Supersonic 180 + Tiamat v4.0.8-sbc
What I am wrong in the flash?
U can try switching to RA n c if that helps
Sent From My Pocket
You have to switch to amon ra
Deck's + SZ + SuperCharger script + ViperMod script.
{ParanoiA} said:
U can try switching to RA n c if that helps
Sent From My Pocket
Click to expand...
Click to collapse
Crossrocker said:
You have to switch to amon ra
Deck's + SZ + SuperCharger script + ViperMod script.
Click to expand...
Click to collapse
Does not crash because I already have cwm?
Can help link tutorial armon ra?
I apologize for asking lots of questions because I still do not understand much
totoadhitama said:
Does not crash because I already have cwm?
Can help link tutorial armon ra?
I apologize for asking lots of questions because I still do not understand much
Click to expand...
Click to collapse
You have to switch to amon ra because the files use amend scripting, which clockwork 3.0+ doesn't support. You can find the amon_ra thread in the development section with instructions on how to flash it. Also you'll have to make a new backup because amon can't restore cwm backups, and vice versa.
You can find info on Amon_RA here.
teh roxxorz said:
You have to switch to amon ra because the files use amend scripting, which clockwork 3.0+ doesn't support. You can find the amon_ra thread in the development section with instructions on how to flash it. Also you'll have to make a new backup because amon can't restore cwm backups, and vice versa.
Click to expand...
Click to collapse
sorry to ask again ....
what difference with Armon cwm?
What immediately install it?
Does it work the same way as cwm?
So far I used to use cwm
Which version of Clockworkmod are you using? There is a custom version that comes with the Revolutionary Root that I am not familiar with but you should still be ok with Amon RA.
Amon RA is similar to Clockworkmod but a little different. For one it still sopports amend scripting which you need for these files. The operation of the recovery is very similar so you should still be able to find your way around.
The install instructions are in the first post of the thread I pointed you to. I used the Bootloader method. You download the PC36IMG.zip and save it in the root of your SD Card and then power it down. Turn it back on with the power button while holding Vol Down.
Once you have switched to Amon RA you will be able to do everything that you did before with clockworkmod.
the problem is solved
thanks for everything
Related
I clockwork mod but whenever i reboot to recovery, its the vanilla type, not clockwork, i have to flash update.zip from SD, and when clockwork comes up, if i press power to select, the screen just goes blank. press power again, clockwork main menu comes back up. what gives?
Wrong Forum.
Questions belong in Q&A.
Flash it via ROM Manager.
Excellent value add
Unknownforce said:
Wrong Forum.
Questions belong in Q&A.
Click to expand...
Click to collapse
I would flash RA recovery as I have found this is the most dependable
Loading Signature....
xlGmanlx said:
Excellent value add
I would flash RA recovery as I have found this is the most dependable
Loading Signature....
Click to expand...
Click to collapse
I would flash Clockwork as I have found it to be problem-free and easy to navigate using one button at a time.
Personal preference.
I agree its still about preference but clockwork had proven to not wipe properly, and some devs suggest using armon. Either way happy flashing
SilverZero said:
I would flash Clockwork as I have found it to be problem-free and easy to navigate using one button at a time.
Personal preference.
Click to expand...
Click to collapse
Loading Signature....
+1 AmonRA recovery
+1,000,000,000,001 clockwork recovery.
i use both I ahve had problems where with AMon it gives an error doing a nand restore soemthign abotu running it form windows. but never have the issue with clockwork. I have the update.zip for clockwork so i use amon to boot into and wipe then clock work to nand and flash.
I am weird i guess
xlGmanlx said:
I agree its still about preference but clockwork had proven to not wipe properly, and some devs suggest using armon. Either way happy flashing
Loading Signature....
Click to expand...
Click to collapse
Do you have a citation for this proof?
SilverZero said:
Do you have a citation for this proof?
Click to expand...
Click to collapse
In the OP for Netarchy's kernal. the Snap or the 2.2 fps fix kernal. He states that clockwork does not wipe dalvik and data completely and recommends amon ra. I myself use clockwork and have never had a problem.
runningwarrior08 said:
In the OP for Netarchy's kernal. the Snap or the 2.2 fps fix kernal. He states that clockwork does not wipe dalvik and data completely and recommends amon ra. I myself use clockwork and have never had a problem.
Click to expand...
Click to collapse
Whatever happened to the scientific method? People will believe anything these days.
I'll do a test today (again) and share my results.
SilverZero said:
Whatever happened to the scientific method? People will believe anything these days.
I'll do a test today (again) and share my results.
Click to expand...
Click to collapse
No i do believe in scientific method, I have tried both and found no error with clockwork, that is why I still use it.
I was just answering his question
Both are better then I could ever do =)
Loading Signature....
I had the dark cherry theme for CM6 RC1 installed on my phone and then went on to the nightlies. Tried to factory reset / dalvik twice before installing the nightly to make sure the theme was gone. When i finished the nightly, the icons that were replaced by the theme were still there, so no, clockwork doesn't wipe completely, it wipes, just not absolutely everything it should. Using latest version via rom manager.
cans ome one tell me how to do it, i remeber trying a while back and it never worked, i mnight have made a mistake, i cant even find the threads for it, partially because i have a splitting headache and partially because it is so damn hot in my room i need to leave. please and thank you.
p.s. i did search for about 7 minutes, between the tempature and the fact that so much has the words clockwork and amon in it its just to much right now.
The easiest way is probably to download ROM Manager onto your phone. It may ask you to install ClockworkMOD again, but that's fine. Once that's done, scroll to the bottom of ROM Manager and select 'Flash Alternate Recovery' or something like that and that will install Amon_RA 1.8.0 onto your phone. Afterwards, you can remove ROM Manager since that only works with ClockworkMOD.
is there any noticable difference, and how will i know its done correctly i thought i tried this once...
mine says no alt. recovery available
Did ROM Manager ask you to flash ClockworkMOD again or no? At the very top of RM, you can try to install ClockworkMOD again and that might allow to you flash alternate recovery. Otherwise, here's the thread for Amon_RA 1.8.0.
[Recovery] [28-August-2010] RA-evo-v1.8.0
ICEReaction said:
Did ROM Manager ask you to flash ClockworkMOD again or no? At the very top of RM, you can try to install ClockworkMOD again and that might allow to you flash alternate recovery. Otherwise, here's the thread for Amon_RA 1.8.0.
[Recovery] [28-August-2010] RA-evo-v1.8.0
Click to expand...
Click to collapse
im using the rom cm6.1.1 it had it on there already so no. however im going to restore to 6.1 because this rom is constantly rebooting itself and getting stuck in bootloops....****.
but yes ill let u no in a few minutes
i flahsed over to an old sense virus rom, i installed rom manager however it didnt ask to redownload clockwork, and i scrolled down to look at the flash alternative recovery, its still grey but this time it has amon ra 1.8 under it but still grey
Went from Myn's Warm Z to CM7 to Myn's 2.2 RLS5. I can't seem to get the latest radio version to show.
After flashing 2.2 RLS5 and followed the steps below:
Downloads:
Download Warm TwoPointTwo RLS 5 (Mirror 1) (Mirror 2) - [MD5sum: ba1cc1aed1d8161e3429909470bd7eb4]
As this ROM now uses the latest official HTC Kernel (#15) you MUST update your Radio/Wimax. I recommend Calkulin's combo update which is available here or via direct download here.
Installation Instructions:
Download Rom and Radio/Wimax updates and place in the root of SDCard.
Reboot into Recovery.
Perform Nandroid backup
Minimally wipe dalvik and cache. For optimal experience, perform full wipe (data/dalvik/cache).
Flash the rom first.
Then the radio/wimax update. While the radios are flashing you'll see a little green arrow phone icon for a bit afterwords, Wait on this. You will then automatically be taken back to recovery.
Once back in recovery, reboot.
Enjoy
But after following those steps exactly, I check my baseband version and it is still on 2.15.00.09.01 instead of 2.15.00.11.19
Can anyone tell me where I may have gone wrong? Or any other suggestions?
Are you using clockwork mod recovery or amon ra? I was having a similar issue using clockwork and I tried it again using amon ra and it worked...
Sent from my PC36100 using XDA App
phsteve said:
Are you using clockwork mod recovery or amon ra? I was having a similar issue using clockwork and I tried it again using amon ra and it worked...
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Using clockwork... never used Amon Ra before, not familiar with it at all. I'll look into and see what happens. Thanks for the reply, really appreciate it.
In the meantime, please reply with any other experiences or suggestions.
DIESTROnG said:
Using clockwork... never used Amon Ra before, not familiar with it at all. I'll look into and see what happens. Thanks for the reply, really appreciate it.
In the meantime, please reply with any other experiences or suggestions.
Click to expand...
Click to collapse
I also suggest using Amon RA recovery. Make the switch, and then try flashing the radio update again.
Sent from my PC36100 using XDA App
I loved clockwork but amon was easier.
Swyped from my sexy EVO.
k2buckley said:
I also suggest using Amon RA recovery. Make the switch, and then try flashing the radio update again.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
i third that. i used clockwork just because it came with my root method (unrevoked) but after having edify issues i flashed to amon ra and havent looked back since. for some reason clockwork complicates something as easy as flashing a simple zip file where as amon ra just makes flashing a simple zip file easy.
Amon Ra is so much better IMO. I got nothin against CWM, but Amon Ra has been flawless for me.
Just for the sake of information. I flashed using that exact same method, using CWM, and everything went off w/o a hitch. However, after all these Amon Ra lovers, I kinda do want to check that out.
thanks for all of the suggestions everyone.
I ended up taking your advice and using Amon RA and it worked! Thanks again.
It is worth noting that when flashing the radios with CWM, I did not see the little green phone icon as described in the instructions. Which I am assuming means that I never REALLY flashed the radios. Although it did seem to flash it, and returned to the main menu of the recovery.
Flash the rom first.
Then the radio/wimax update. While the radios are flashing you'll see a little green arrow phone icon for a bit afterwords, Wait on this. You will then automatically be taken back to recovery.
Once back in recovery, reboot.
Only difference with Amon RA's was that after flashing the radio zip from the sd card, it instructed me to reboot in order to continue the installation of the radio zip.
Anyway, it worked, and thanks to everyone who replied.
Glad you got your issue resolved. I see your kinda new here. Proper forum protocol is to physically click the "Thanks" button for the people that helped you. Just a heads up.
I'm running CM7 with Clockworkmod 3.0.0.5. Im trying to flash the latest radio, so i need to flash back to a Clockworkmod 2.x.
But the thing is Rom manager already says my current recovery is 2.5.0.7. But when i actually reboot into recovery its definitely still 3.0.0.5. I've tried to flash all of the older versions of Clockworkmod available in Rom manager, and it says they flash correctly, and rom manager even reports that my clockworkmod version is the one i tried to flash. But when i reboot into recovery it hasnt changed.
Ive even tried to flash amon ra through rom manager and that did nothing.
I have "erase recovery" checked in settings. I tried to fix permissions. I've rebooted and even wiped data. Ive gone into market and uninstalled the updates to go back to rom manager 3.x but that didnt fix the problem. Ive wiped dalvik cache and that didnt work either.
Does anyone know what the problem is?
If not, does anyone have a link to a clockworkmod 2.x recovery.img so i can just manually flash it through fastboot? ive looked around everywhere but i cant seem to find one.
so i restored a really old backup of cm6 (which has rom manager 3.x), which i didnt even think was possible with CWM 3 and edify scripting, flashed amon ra in rom manager, and once i rebooted into recovery it was actually amon ra. i flashed the radio and all seems well. not sure why CM7 with rom manager 4 wouldnt correctly flash a recovery, but it seems resolved for me at least.
For future reference, it is just as easy and recommended to load amon RA via the bootloader as it is from the ROM Manager app.
posting & replying via the XDA Premium app.
dougjamal said:
For future reference, it is just as easy and recommended to load amon RA via the bootloader as it is from the ROM Manager app.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
whats really the difference between flashing through the bootloader, flashing through rom manager, flashing through fastboot, or flashing through the command line with flash_image?
Obviously rom manager has problems, thats what this whole post is about. But as long as it actually does the flash there shouldnt be difference between the different methods of flashing should there?
You basically answered the question. It's not that ROM Manager is incapable, there have been times when it failed to flash recovery and there have been times when it didn't contain the latest RA recovery. Yea, those things are minor, but it is enough for me to discard using it. Besides, I'm always in the recovery itself so it is only natural for me to do everything from within recovery or the bootloader. But, to each his or her own.
posting & replying via the XDA Premium app.
dougjamal said:
You basically answered the question. It's not that ROM Manager is incapable, there have been times when it failed to flash recovery and there have been times when it didn't contain the latest RA recovery. Yea, those things are minor, but it is enough for me to discard using it. Besides, I'm always in the recovery itself so it is only natural for me to do everything from within recovery or the bootloader. But, to each his or her own.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Can i ask why you prefer amon ra over clockwork mod? Does one offer an advantage over the other? Does RA support edify scripting?
I was a faithful ClockworkMod user when I first rooted my device. I had no problems and no intention to switch until around version 3.x.x.x. after that, I started having issues with it not wiping properly so I switched over to amon RA. Although those problems have since been corrected, I have become quite accustomed to amon RA and until it fails me, I will stick with it. Furthermore, there have been times when people's devices have failed to properly boot or wouldn't allow access to recovery until they flashed amon RA. I like its menu layout and how well it works, but that's just me...
posting & replying via the XDA Premium app.
Hey guys, Sprint ended up changing something on my account and screwing up my evo so I couldn't access 3g. Long story short, I RUU'd to get it back to stock and was able to then get 3g data back. Now it still shows S-Off, but I can't boot into recovery and the clockwork mod rom manager won't work, because it says my phone still needs to be rerooted. I was thinking since when I boot into recovery it says S-Off, i'm already rooted and I just need the zip for clockwork mod recovery and I can then go in and flash roms to my hearts content.
Does anyone know where I can find the .zip for clockwork mod recovery?
You need to flash clockworkmod through the bootloader I wouldnt recommend clockworkmod and most people don't recommend it you can find it on clockworkmod.com under recovery images and look for the EVO
Edit:also you might have to flash a superuser zip to get root back
Sent from my PC36100 using XDA App
I don't personally recommend clockworkmod to use as your recovery, but if you just need to have it, you should find it much easier to run the attached PC36IMG file from your SD card.
Also, you may need to flash (or install from SD card) through clockwork the attached superuser zip file to obtain your root permissions if you are going to continue to use stock ROM.
That works
Thank you Shorty Dogg - the pc36img.zip was exactly what i needed. I'm used to Amon Ra, but wanted to try out clockwork. Thanks again!
I would use amon RA or amon RA style supersonic recovery since u had cwm b4 I'd recommend RA style supersonic recovery 3.0.8 as it will allow you to use your cwm backups as well as RA backups and any backups you make in the future, plus it has capacitive buttons and touch screen working in recovery has a battery level option and etc check it out in development
Sent From My EViLizED-iCS-EVo4G
hcavlnch said:
Thank you Shorty Dogg - the pc36img.zip was exactly what i needed. I'm used to Amon Ra, but wanted to try out clockwork. Thanks again!
Click to expand...
Click to collapse
Good luck cwm is garbage compared to RA on the evo it doesn't like to wipe properly alot of times, as well as it doesn't have the same wipe options as RA, atleast it didnt the last time I used it which has been a minute I ditched it for RA almost immediately
Sent From My EViLizED-iCS-EVo4G
ok i've used the rev tool and installed superuser but says not rooted. I've installed busy box and this is what it is saying. " error. root access not detected. Your device must be rooted to install busy box. if you fell that youare recieving this message in error please go into superuser app and click on busybox installer and then click forget and restart this app." but it is not showing that in superuser. do i just flash the superuser in this section and try it again. i'm rooting a friends phone and followed the instructions to the t. thanks in advanced.