Related
For some reason my HTC at the bottom is getting very hot and rebooting because of it. I pulled the battery and with the charger in and battery out its still overheating. With just the battery it is also overheating and now it's not charging.
No software changed so it has to be hardware, can anyone tell me if their Desire gets hot at the bottom with charger in and battery out? If so I might be able to try a new battery (the current one isn't getting hot at all). Phone was bought second hand so I could be stuffed!
Cheers, Andrew
Sometimes with hard use (many downloads at the same + 720p streaming and charging) the battery take over 45C. But never reeboot. So i think you have a battery failure, or even worth, a motherboard failure.
Sent from my HTC Desire using XDA App
I'm gonna go with what you said.
Doubt its the battery (not ruling it out though).
My desire kept rebooting when I used GPS / Wifi or mobile data. I just took it back.
Hope you're still under warrantee.
Nope, last phone I buy without one.
It's basically dumping all power including that in the battery into heat, I presume the GPRS chipset has failed as I lost signal. Battery drained extremely fast and now wont charge as the full 500mA from the USB is going into heat.
New mainboard time. Finding one though...
i doubt its a motherboard problem.
more just a problem with heavy use. maybe try not to do 10 things at the same time.
it is still a mobile phone afterall.
Err no, liquidmonkey it doesnt work like that.
IF its overheating to the point where its constantly rebooting, then its a hardware failure. All this stuff about putting phones in the freezer is a load of rubbish, just like the old Xbox 360 towel trick. If its overheating - its faulty.
just got my Desire back from vodafone, new mainboard, i already tested in sunny Lisbon (27c) working in the sun, for navigation in the car with google maps navigation, *
the old one, in direct sun lite it would not stay on for 5m.
Now it is ok!
and since it is a new mainboard and IMEI, i have a renew 2 YEAR WARRANTY . thx voda... lol
but that's not all, they also changed my screen from a SLCD to a OMOLED ???
and i don't think that's ok!
when i delivered my desire to vodafone, they lent one other htc desire to me, it also was amoled, but it add much better viewing angle, and less tending to blue.
my new screen was a very poor viewing angle because the colors tend to much to the blue when i tilt the phone, it also is very bright, does not have as much definition as the SLCD, and i think the one voda lent to me ad also better definition, but at least the black is really black and color very vivid!
do you think that what i have *seen, 3 different screen's in 1 week, and considering the characteristics of my new screen, are normal for amoled screen? ?
thx in advance (sorry for the inglish)
hi guys ! its a overheating problem 100% didnt find a fix yet...
pacattosul said:
hi guys ! its a overheating problem 100% didnt find a fix yet...
Click to expand...
Click to collapse
Mine will get very hot if charging whilst playing video or using GPS but I think its only rebooted once.
I have bigger problems with my other phone, in comparison the desire really is a cool phone.
I guess you could try under clocking it if you have problems?
Just to encourage anyone suffering from the overheating - get HTC to change the main board - it's like a new phone ...
I did the same... got the board replaced... they recognise it as a hardware fault over the phone and will replace the main board.... I've got a PVT3 now, I used have a PVT1
There is another very, very long post on this issue, and have been meaning to ask for some advice - this much shorter post has reminded me!
I also have the overheating/rebooting issue, have called HTC and reported the problem. Just waiting to sort myself out with a replacement handset before I call up and ask them to send the courier round... What I would like to know is, what is the best way to ensure that the main board is replaced first time around without any to'ing and fro'ing between me and HTC? How do you get them to recognise it's a hardware fault over the phone (I'm in the UK)? I basically just want to get my phone repaired ASAP and back to me ASAP without any hassle!! (and it's very ovious what the problem is!)
I also suffer from this problem occasionally.
I don't think I will bother sending it back to HTC as it will mean unrooting and flashing the stock ROM. I'm also due an upgrade soon so it will probably be more hassle than it is worth.
I may unroot it and flash the stock ROM and send it off to HTC after I have upgraded. I will then have a spare Desire or can give it to a good home.
Sent from my HTC Desire using XDA Premium App
Possible Fix for Overheating
Hi!
I have a HTC Desire with the AMOLED-Screen, which is said to be way better than the SLCD. I did a lot of research using Google and various forums, but did not find a real fix for my overheating phone: everytime i did more than just listen to music, my phone rebooted over and over again. It did get hot in the commonly described areas (around the microSDHC and SIM-Card and the little black square), and i had to rip off the battery to make it stop. I was really annoyed since i read that i would get a replacement without the AMOLED-Screen, that is why i decided to do some testing on my own. I found out, that i had less trouble with higher workload when i enhanced cooling by putting it in the fridge for example. (Other things like changing the microSDHC did not solve the problem for me.) When it comes to computers overheating, you clean them and have a look at the thermal grease between the chips and the coolers - and that is what i decided to do to my phone. On the inside of the battery cover, there is some metal-like shield in the lower area. I guess it is there for heat dissipation - but maybe it did not have proper contact. As i did not want to clutter the phone with thermal paste, i ordered a pad on ebay (for about 2€), cut it into smaller pieces and attached it to the parts that are known to become hot (see above). Then i attached my phone to the charger and ran a lot of apps, that would usually make my phone crash (Music Player, Skype, Internet Browsing at the same time). The back of the phone grew hotter and hotter (and was, in the end, a lot hotter than anything i have encountered over the last few month with my crashing phone), but it was stable!
So, if you are annoyed with your overheating HTC Desire: This might be a fix for you:
Buy a thermal pad (as it is used for CPUs, GPUs or Chipsets, mine was about 0,5mm thick) and attach it to the metal parts over SIM and microSDHC as well as the tiny black square and the area to the left of it. Mount the battery cover and enjoy!
Hope i could help
Terminator
EDIT: Turns out, the "fix" only delays the reboot-loop. It appears a lot more stable, yet it did still annoy me. Yesterday i handed it in for a replacement.
Hi all. In need of a bit of advice here. Hope this is in the right forum.
My beloved DHD has suffered from one too many falls. Despite being protected in an Otterbox Commuter case, he now lies on his deathbed. Even though I was considering an upgrade, I'm thinking I might want to stretch out his life for as long as possible instead. So I've come here to ask for repair advice.
- The phone seems structurally sound from the outside, no damage besides minor aesthetic scratches from before the phone was protected by the Otterbox.
- It appears to boot. Makes the vibration noise etc. Heck the alarm even went off the other morning, at the set time of 0630.
- Screen does not function at all. Lifeless. But not broken in any way externally. Because of this, had to pull the battery to shut the alarm off.
- When plugged in to charge, charging light indicator does not illuminate.
Any ideas?
Sent from my nipple running windows 95 NT.
Cheers, although I'm gonna try a different approach for now.
Any ideas? Can anyone point me in the right direction of some advice?
Sounds like 2 things. Broken lcd and a broken charging port. It wouldn't be worth repairing. You could buy one second hand on ebay for aboot £120.
Sent from my nipple running windows 95 NT.
Thanks for that. Considering trying to sell it broken, for parts. Only thing that concerns me is any sensitive data that may be readily accessed by someone who knows how to get to it.
Is there a way to wipe it?
You could use another dhd with the same firmware and copy the key/button presses and reset it in bootloader mode.
Sent from my laser emitting mammary glands.
Could also be that the connector for the screen has been dislodged due to being drop to many times you mite try opening it up and see if it is that.
lincolnep said:
Could also be that the connector for the screen has been dislodged due to being drop to many times you mite try opening it up and see if it is that.
Click to expand...
Click to collapse
Hi, thanks for the response. So I assume you're referring to this part here?
http://www.parts4repair.com/htc-desire-hd-lcd-screen-fpc-connector/
Seen in this disassembly video from the 3:05 minute mark?
http://www.youtube.com/watch?v=JfatoeWbMRk
bump...
I have a problem similar to yours. But in my case, I'd turned the phone off to go to the cinema and the LCD and touch never turned on again.
In order to erase your data, did you try overwriting a stock rom? (In case it's just the charging LED that is broken)
That sucks! Self detonating phone. Does yours still vibrate and 'turn on'?
Haven't actually managed to clear the data. I'm ordering this part here (http://www.parts4repair.com/htc-desire-hd-lcd-screen-fpc-connector/) and I'm going to attempt to pull it apart and fix it.
If I can get it to work again I'll sell the One V I'm using and go back to the old faithful!
Well this saves me from starting a new thread haha
Anyway i am having the exact same problem as you have.
My dad brought home a Desire HD from work wich was not working so i am trying to fix it.
The phone boots, it vibrates ones and after a minute it makes the boot sound.
But nothing responses and the lights wont turn on.
Also no charging light..
Also it does not charge but usb does connect.
Could this be the FPC connector or the screen?
Hmmm...interesting, exact same issue as mine.
Well, I've ordered the FPC connector replacement part I linked above...going to attempt to play around with it when it arrives and see if I can breathe new life into the phone. So I can tell you how that goes...
Although:
1. Would the charging light and screen problem be connected? Is this feasible? Or does it suggest something else is likely shot?
2. I believe the FPC connector requires a solder to replace. This could be a bit ambitious on my part to attempt to repair...any ideas on what sort of a solder would be suitable?
Sent from my HTC One V using xda premium
suitup said:
Hmmm...interesting, exact same issue as mine.
Well, I've ordered the FPC connector replacement part I linked above...going to attempt to play around with it when it arrives and see if I can breathe new life into the phone. So I can tell you how that goes...
Although:
1. Would the charging light and screen problem be connected? Is this feasible? Or does it suggest something else is likely shot?
2. I believe the FPC connector requires a solder to replace. This could be a bit ambitious on my part to attempt to repair...any ideas on what sort of a solder would be suitable?
Sent from my HTC One V using xda premium
Click to expand...
Click to collapse
no clean flux core solder would work best, preferably something very thin (about .015"). A small bottle of noclean flux would also help and you probably will need lead free solder as that is likely what they used on the board to begin with, and lead and leadfree dont typically mix as well.
Thanks for the quick reply...
Something like this?
http://www.oritech.com.au/productDetail.aspx?productID=23244
What sort of iron would be suited? Would any of these suit?
http://www.oritech.com.au/categories.aspx?categoryID=321
Would you say it'd be a difficult process? I've soldered before, but a that was a while ago in high school...
Also the cost of all this equipment will far outweigh the cost of the $3 FPC connector spare!
suitup said:
Thanks for the quick reply...
Something like this?
http://www.oritech.com.au/productDetail.aspx?productID=23244
What sort of iron would be suited? Would any of these suit?
http://www.oritech.com.au/categories.aspx?categoryID=321
Would you say it'd be a difficult process? I've soldered before, but a that was a while ago in high school...
Also the cost of all this equipment will far outweigh the cost of the $3 FPC connector spare!
Click to expand...
Click to collapse
yes, those should both work fine. ya it is costly for equipment. i have a edsyn iron i use at home and solder i get from work. i would say it can be tricky, i havent seen the connector but im sure its similar to other inline ribbon connectors. remember, short burst soldering, heating it for too long will take the pad off the pcb, and repairing THAT can become very difficult.
suitup said:
Hmmm...interesting, exact same issue as mine.
Well, I've ordered the FPC connector replacement part I linked above...going to attempt to play around with it when it arrives and see if I can breathe new life into the phone. So I can tell you how that goes...
Although:
1. Would the charging light and screen problem be connected? Is this feasible? Or does it suggest something else is likely shot?
2. I believe the FPC connector requires a solder to replace. This could be a bit ambitious on my part to attempt to repair...any ideas on what sort of a solder would be suitable?
Sent from my HTC One V using xda premium
Click to expand...
Click to collapse
Thanks. We have a spare DHD with broken glass here wich my sister is using unter her SGS is back from repair. Will swap the motherboard when her phone is back.
Sent from my HTC Vision using xda premium
Many One X owners, including me, has be having from display/screen issues that are quite annoying. And apparently, none has a definite answer as to what the main cause is. hTC has exchanged all those faulty devices, claiming it's a "hardware" issue...while in fact, it's their stupid back covers...i'll explain as we speak.
First, to know what screen/display problem i'm talking about, please refer to this Video.
Few days ago, i got my hands on a "Dead" One X...but i just refused that fact...because it just works! but no screen....screen is always blank....can touch it, go to dealer and make a phone call even. Sometimes the screen turned, sometimes, and it was like in the video, exactly like it.....so what's the problem?!
yesterday, i'll be honest, i got mad at this phone and held it with a tight grip...my finger happened to press just above something...and the screen turned on! worked great in fact! i was astonished! it just worked....but, oops, i turned off screen, then when wanting to turn it back on...blank...
I kept pushing on the back casing of the phone, trying to find the same place that made the screen turn back on...and viola, same place pressed on, screen back on.
Wanna know what's causing all of this?
Here you go:
Click me!
And those connectors Should be in good contact with this on the back cover
Click me too!
But you know, hTC ****ed this one up, just like it does on most devices with connectors on the back cover...*sigh*...like the sensation for example...
So what to do now?
i tried a bunch of things, and almost broke those connectors with a stupid thick aluminum foil on top of them...
also i tried bending them up, but that doesn't help either, as when the cover pushes them down, their shape will change and well...didn't work.
i also tried putting aluminum foil on the metal connectors on the actual cover...didn't help as well!
it seems only pushing on it from outside does the trick!!
i also tried pushing on the connectors together while the back casing is off, didn't work...as it seems there must be a triple connection...board, connectors, and cover...
I think the only solution would be with a new back casing? but...if hTC f****d it up with this one, wouldn't all back casing suck too?? or is this a manufacturing problem that the connectors are just short and won't connect well?!
here are pictures of how the phone turned on magically after pressing over that connector, and another of how the screen gets messed up when the, well, there's not a good connection...Thank you hTC!
Sample 1 Sample 2
Tomorrow i will buy a new back casing and report if that helped me or not.
I only came to this because i have no warranty...if you have warranty, please consider an exchange!
Oh, and finally, i was able to get into bootloader, first time i saw that screen! always has been blank!...pushing on the connector also did the trick.
Finally!
Soooo...comments?
If anyone has an idea on how to make the back casing come in better contact with those connectors, please let me know.
UPDATE
Hmm, why did you put this into Q&A?
what? in a bad mood and wanna bash me?
where should i put it then? as people with such problem would come ask here, am i right?
EDIT: lol, it's all good now ^^
arabology said:
what? in a bad mood and wanna bash me?
where should i put it then? as people with such problem would come ask here, am i right?
Click to expand...
Click to collapse
Well nah, would post it into General , as this was more like a guide. I wasn't bashing.. and not in a bad mood... If anything I bumped your thread up...
Also wanted to say that those contacts and that case seems to be f..cked up in general. As next to those you have the WIFI ones which in another thread, thats in General is shown how to fix...
My first comment was a compliment and you could clearly see I was smiling as I am on my avatar smiling. No reason to get defensive...
PAGOT said:
Well nah, would post it into General , as this was more like a guide. I wasn't bashing.. and not in a bad mood... If anything I bumped your thread up...
Also wanted to say that those contacts and that case seems to be f..cked up in general. As next to those you have the WIFI ones which in another thread, thats in General is shown how to fix...
My first comment was a compliment and you could clearly see I was smiling as I am on my avatar smiling. No reason to get defensive...
Click to expand...
Click to collapse
oh well...also WIFI connectors are bad?...no wonder SIII is flying and hTC is dying...
anyway, maybe a moderator can take this thread to the general forum, thanks for pointing those things out!
and sorry i seemed mean, but many, really, many users have nothing better to do but nag...trolls
thanks ^^
Soldering would fix this!
putting two round solders on the gold plates of the back cover. i will try that tomorrow. but i fear they would squash the connectors on the board? as that's what happened when i used two tiny balls of aluminum foil....one connector got squashed by it and i had to push it back up and play with it to make it look normal again.....hmmmm
arabology said:
Soldering would fix this!
putting two round solders on the gold plates of the back cover. i will try that tomorrow. but i fear they would squash the connectors on the board? as that's what happened when i used two tiny balls of aluminum foil....one connector got squashed by it and i had to push it back up and play with it to make it look notmal again.....hhhhh
Click to expand...
Click to collapse
Moved to general forum hope youll fix it bro...
So it is a hardware fault,would never guess that...in the general forum you have a topic with the name "wifi fault" give a look on that
Sent from my HTC One X using XDA
muamers said:
Moved to general forum hope youll fix it bro...
So it is a hardware fault,would never guess that...in the general forum you have a topic with the name "wifi fault" give a look on that
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
arabology said:
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
Click to expand...
Click to collapse
Like you guys would say: "inshallah" :d
Just dont rush with the opening and be carefull
Sent from my HTC One X using XDA
waw another fellow citizen
so before we go ahead and go
doooom gloooom htcccc suxxxxxxx
lets first affirm tons of people have no problems with their wifi and their screens
so yes those connectors issues whether screen or wifi are another forum of a manufacturing defect, things might not be perfectly aligned and hence the issue
the flickering issue your thread title suggests finding the source of, isnt related to this, 90% of the corruption we saw out of box on the HOX turned out to be software including the back-light flicker which HTC fixed by readjusting the LCD voltage
moving on to your question a new back cover might very well fix it unless the misalignment is on the board
but im wondering why is this pin related to the screen to begin with? the Sensation didn't have such a pin you could remove the back cover and the screen kept operating, also the disassemble photos that were posted for the HOX showed the board and screen running perfectly without the back cover
as for the stupid copper foil, make sure you don't loose it unless you are planning to make a bomb its added to distribute Tegra3 heat
arabology said:
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
Click to expand...
Click to collapse
Before you do that, please check the WIFI thread. There was already one member that described that soldering or adding a wire might be possibly harmful in the long run.
Changing the electricity stuff, how its called, the resistance or something (for the antenna though)
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Update:
well, My One X is just cursed, few days ago it feel off my hand and the screen got cracked. now i'm waiting for my local repair station to get hold of a One X digitizer.
ALSO, HUGE NEWS, seems i was wrong. it's not the connectors. it's the whole part where there is a copper kinda sheath over it...i guess that's where are the cores are plus the Nvidia Tegra chip??! turned out, when i push there, that the screen lights up. at first i thought it's the connector, coz that's the most reasonable right?
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
walker07 said:
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Click to expand...
Click to collapse
i say you should demand an exchange. hopefully the device they'll give will be of a different tier of products that doesn't have that silly, unknown problem.
also, i'm pretty well sure that they won't repair your device. as i read many users regarding this issue, all of them got an exchange......seems pretty messed up. and i doubt my paper trick will hold long before this issue comes back
PAGOT said:
Before you do that, please check the WIFI thread. There was already one member that described that soldering or adding a wire might be possibly harmful in the long run.
Changing the electricity stuff, how its called, the resistance or something (for the antenna though)
Click to expand...
Click to collapse
now that i have a paper inside my back casing, i can see that my WIFI connection is not at it's best, because of the extra space it took. so i'll most probably solder all the connectors
arabology said:
Update:
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
Click to expand...
Click to collapse
there was some guy, who posted a youtube video of when he pushed a certain area of his screen (the front part), it would switch off!
It only did it when pushed in that area, it was literally like a second power button.
Sorry I don't know exactly what it was, just the fact that somebody else had a similar problem!
HTC repaired my phone as the screen was faulty, it had a yellow tint, when i sent it for repair it did have screen flickering, ever since its come back, with a new screen, i rooted it and also put in the NEW ARHD rom, 2.05.2 base or something, it has stopped flickering :fingers-crossed:
walker07 said:
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Click to expand...
Click to collapse
Finally found someone with the exact same problem. I haven't been able to use my hox properly for weeks. Think I need to be sending back to HTC
Sent from my X10i using XDA
Finally I've got my OneX replaced with a new unit.:laugh: Hoping this will not have any sort of hardware faulty anymore.
interestingly. while waiting for my turn in the service center, I was just talking to a guy sitting and waiting beside me who came to report a problem with his OneX
and apparently its his 4th time visit to the service center. And all his previous 3 visits ended up with his OneX getting replaced each time....and each time with a different hardware issue (screen flickering / dead pixels / color faulty). Oh man....I thought the OneX was the best quality product from HTC.
and now I'm having a slight regret that I shud have just waited for another 2 more months and bought the SIII instead. God knows what other problems my OneX is going to come up with.
Hi
arabology said:
Update:
well, My One X is just cursed, few days ago it feel off my hand and the screen got cracked. now i'm waiting for my local repair station to get hold of a One X digitizer.
ALSO, HUGE NEWS, seems i was wrong. it's not the connectors. it's the whole part where there is a copper kinda sheath over it...i guess that's where are the cores are plus the Nvidia Tegra chip??! turned out, when i push there, that the screen lights up. at first i thought it's the connector, coz that's the most reasonable right?
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
Click to expand...
Click to collapse
Probably what's referred to as a dry joint or some other connection not connecting very well, not uncommon in electronics.
You need to get it repaired or replaced, simple as that. If it is a dry joint under one of the chips that use a ball grid array of solder points, you will never be able to sort that out yourself and it would be scrapped more than likely rather than a repair attempted for such a fault. To repair, it would need to go into a special over to heat it enough to melt the solder under the chip. Exerting pressure will just eventually make things worse as you can end up fracturing more of the soldered connections as there is little give to resist flexing.
Regards
Phil
Hello. I start writes at the beginning of what the problem is. My G3 is very unlucky. Underwent operations 3 exchanges panel (display + touch). After the final exchange of the phone came two days after what appeared screen flickering. Having traced the various forum decided according to the recommendations of users heating the main processor. Not happily operation failed. The phone does not respond to anything. Now I have a chance at a low cost to get a G3 with a broken touch to transplantation motherboard. Only now is the question. Is it really the problem lay in the motherboard whether there is a possibility that the display itself is defective. Sorry for a bad English. Thank you gentlemen for your interest in the subject and I hope that you will help me with this problem. At the end I might add, with the phone still went smoothly in the display white spots. Have a nice day guys!
yes the problem is in the motherboard -- the SOC heat cause that issue
So the change of the motherboard will fix it ?
Okey tommorow or later arived to me brake screen g3 and i swipe motherboard and type there result thanks again for yours interesting this thread.
It's either a:
A) Dying battery
B) Bad screen or not a proper connection
C) Motherboard
I would check the screen and battery first as they were the first tampered with.
Taking the motherboard from another G3 is a good plan. You can also try applying a thermal pad to the back plate.
And for ****s sake, for the 1000th time:
DO NOT PUT YOUR MOTHERBOARD IN THE OVEN.
And expect a repair that is... As a means to try to boot it up for a couple of minutes to backup your data, sure, suit yourself.
If it is the same problem that others describe it is probably the motherboard. I just bought a new one and replaced mine. Like a new phone now. You can read my comment on another thread here for more details.