Develop Bugs

help - I did something bad

I know I didn't brick my phone because I can still get into bootloader. I've tried to connect to Odin (several times following instructions to remove battery, restart pc, etc) and Odin won't recognize phone in bootloader. I was trying to update to gingerbread 2.3.5 using Odin and it got stuck. it said 'writing, wait 2 minutes' and I waited 8 mins and it never did anything. was I just inpatient? Now when I try to restart my phone it tells me manual files were installed and to hit the OK button. I have no OK button and I've tried all the screen buttons and the 3 hardware buttons to select 'reboot' as instructed per the phone and none work. So I pull the battery and start the vicious cycle all over again. I've been searching and searching (for the past 2hrs) trying to solve this on my own and I'm stuck. I need this phone as it's my work phone and I just got it Friday! (owned by me, not my company thankfully!) please help. thank you.

lol looks like u got urself a sweet paperweight haha. 1st of all make sure u have all the drivers installed, secondly it might be ur usb cable too

klyang88 said:
lol looks like u got urself a sweet paperweight haha. 1st of all make sure u have all the drivers installed, secondly it might be ur usb cable too
Click to expand...
Click to collapse
I could previously connect to Odin so I wouldn't think it was the drivers or the cable. I hope I didn't really brick it! I can't afford a new one! booo

nursemm05 said:
I could previously connect to Odin so I wouldn't think it was the drivers or the cable. I hope I didn't really brick it! I can't afford a new one! booo
Click to expand...
Click to collapse
have u tried a different usb plug in hole?

Pulling the cable on a Odin flash is the quickest way to ruin your phone. Should have left it plugged in and looked around real quick for an answer.

klyang88 said:
have u tried a different usb plug in hole?
Click to expand...
Click to collapse
I have and another computer. still no luck. Won't recognize it.
tenaciousj said:
Pulling the cable on a Odin flash is the quickest way to ruin your phone. Should have left it plugged in and looked around real quick for an answer.
Click to expand...
Click to collapse
doesn't help to tell me what I should've done. Is this fixable or not?

nursemm05 said:
I have and another computer. still no luck. Won't recognize it.
doesn't help to tell me what I should've done. Is this fixable or not?
Click to expand...
Click to collapse
if u can still get into odin mode, then yes it should still be fixable

The only thing I can think of as I have never seen this B4. try holding power down,it takes awhile but it should reboot. I will try to get ahold of more info for you. No promises though. But rule of thumb Be patient.
One last thing where did you get the update from? ie 2.3.5. It helps to know what you were trying to flash.

Indrid Cole said:
The only thing I can think of as I have never seen this B4. try holding power down,it takes awhile but it should reboot. I will try to get ahold of more info for you. No promises though. But rule of thumb Be patient.
One last thing where did you get the update from? ie 2.3.5. It helps to know what you were trying to flash.
Click to expand...
Click to collapse
just tried that and it gives me the same screen I was getting when I just pressed the power button to turn on. then it says to press OK to reboot and none of the buttons work to reboot.

nursemm05 said:
I know I didn't brick my phone because I can still get into bootloader. I've tried to connect to Odin (several times following instructions to remove battery, restart pc, etc) and Odin won't recognize phone in bootloader. I was trying to update to gingerbread 2.3.5 using Odin and it got stuck. it said 'writing, wait 2 minutes' and I waited 8 mins and it never did anything. was I just inpatient? Now when I try to restart my phone it tells me manual files were installed and to hit the OK button. I have no OK button and I've tried all the screen buttons and the 3 hardware buttons to select 'reboot' as instructed per the phone and none work. So I pull the battery and start the vicious cycle all over again. I've been searching and searching (for the past 2hrs) trying to solve this on my own and I'm stuck. I need this phone as it's my work phone and I just got it Friday! (owned by me, not my company thankfully!) please help. thank you.
Click to expand...
Click to collapse
Of the responses so far, I'd start with a new microUSB cable. Whether the current cable worked 30 seconds ago or not, that could certainly be a potential issue, might as well rule it out.
After that, a few things to consider:
1) Can you get into recovery? [Hold Vol. Up] + [Power] for as long as it takes to get to the recovery screen (anywhere from 15 seconds to two minutes of solid holding.) If you can get to recovery, you are going to be in business. If after 120 seconds it hasn't gone into recovery, move on.
2) In your post, you refer to "bootloader", technically correct, but want to make sure you are referring to Odin download mode. The whole "instructions to remove battery, restart pc, etc" throws me off, you shouldn't have to do any of that. Just to make sure, what you want to do is:
Start up Odin 1.85 on your PC
Power down phone
Wait for capacitative button lights to turn off
Simultaneously Press and Hold [Power] + [Vol. Dn] until confirmation screen appears
Press [Vol. Up] to enter Download mode
Connect USB cable to the phone and then to the PC
ODIN should show COM port in first slot
3) If you can successfully get into ODM and the COM port in the first slot lights up, you are golden. Follow the rest of the steps here and you are all set to move forward or hang out from that point.
4) "I was trying to update to gingerbread 2.3.5 using Odin and it got stuck. it said 'writing, wait 2 minutes' and I waited 8 mins" I'm thinking maybe you flashed with Bootloader, Phone or CSC selected rather than PDA in the Odin menu. If that is the case you should still be able to get into ODM as shown above.

Just_s said:
1) Can you get into recovery? [Hold Vol. Up] + [Power] for as long as it takes to get to the recovery screen (anywhere from 15 seconds to two minutes of solid holding.) If you can get to recovery, you are going to be in business. If after 120 seconds it hasn't gone into recovery, move on.
Click to expand...
Click to collapse
yes, that is where it tells me media files have been installed and to press OK to reboot the phone (and other options to wipe data, cache, etc). It is not CWM recovery.
2) In your post, you refer to "bootloader", technically correct, but want to make sure you are referring to Odin download mode. The whole "instructions to remove battery, restart pc, etc" throws me off, you shouldn't have to do any of that. Just to make sure, what you want to do is:
Start up Odin 1.85 on your PC
Power down phone
Wait for capacitative button lights to turn off
Simultaneously Press and Hold [Power] + [Vol. Dn] until confirmation screen appears
Press [Vol. Up] to enter Download mode
Connect USB cable to the phone and then to the PC
ODIN should show COM port in first slot
Click to expand...
Click to collapse
Yes, Odin mode by doing what you said. I was referring to what to do if Odin won't connect. Remove battery, restart PC and try to reconnect to Odin
3) If you can successfully get into ODM and the COM port in the first slot lights up, you are golden. Follow the rest of the steps here and you are all set to move forward or hang out from that point.
Click to expand...
Click to collapse
therein lies the problem, I can't get the first slot to show yellow to show it's connected.
4) "I was trying to update to gingerbread 2.3.5 using Odin and it got stuck. it said 'writing, wait 2 minutes' and I waited 8 mins" I'm thinking maybe you flashed with Bootloader, Phone or CSC selected rather than PDA in the Odin menu. If that is the case you should still be able to get into ODM as shown above.
Click to expand...
Click to collapse
yes. I followed these instructions -
Check only Re partition, Auto reboot & F. Reset time in option
Put the files like this in Odin:
PIT = u1_02_20110310_emmc_EXT4.pit,
PDA = CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5,
PHONE= MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5,
CSC = GT-I9100-CSC-MULTI-OXAKI3.tar.md5
Hit the start button and process will begin

just tried another cable, no joy.

nursemm05 said:
yes, that is where it tells me media files have been installed and to press OK to reboot the phone (and other options to wipe data, cache, etc). It is not CWM recovery.
Yes, Odin mode by doing what you said. I was referring to what to do if Odin won't connect. Remove battery, restart PC and try to reconnect to Odin
therein lies the problem, I can't get the first slot to show yellow to show it's connected.
yes. I followed these instructions -
Check only Re partition, Auto reboot & F. Reset time in option
Put the files like this in Odin:
PIT = u1_02_20110310_emmc_EXT4.pit,
PDA = CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5,
PHONE= MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5,
CSC = GT-I9100-CSC-MULTI-OXAKI3.tar.md5
Hit the start button and process will begin
Click to expand...
Click to collapse
"GT-I9100-CSC-MULTI-OXAKI3.tar.md5"? Aren't you on the E4GT? So flashing all of these files for an international SGSII would be the first issue. What forum did you get these from?
This might be a big issue afterall. Get back to me on where you got the files and I'll see if I can come up with something in the meantime.
EDIT: One thing that will work for sure, but you'd have to wait for it to come in is a $2 jig. Once you get it, you'll back in business in less than 2 seconds. Mine took 5 days via standard shipping. You could do expedited shipping if you need it faster. In lieu of that, I will keep thinking about what you can do tonight.
EDIT 2: I know you said that you have driver's installed an all, but if you downloaded them where you got those files, they might not be what you need for this phone. You might try going to the E4GT Auto Root thread and get everything you need to start fresh from there.
Then/or try this again:
Disconnect phone, and remove battery (wait 30 -60 seconds or so).
Re-insert the battery and power the phone as I noted before by simultaneously pressing and holding [Power] + [Vol. Dn] until confirmation screen appears
Press [Vol. Up] to enter Download mode
Make sure NPS and KIES are NOT running IMPORTANT
Start up Odin v1.85
Keep trying to connect the phone to get a COM port lit. If it's not working, try changing USB ports. Try every port on your PC.
Keep trying, I've seen odin fail to recognize phones over and over and then
suddenly recognize it out of nowhere.

Just_s said:
"GT-I9100-CSC-MULTI-OXAKI3.tar.md5"? Aren't you on the E4GT? So flashing all of these files for an international SGSII would be the first issue. What forum did you get these from?
This might be a big issue afterall. Get back to me on where you got the files and I'll see if I can come up with something in the meantime.
Click to expand...
Click to collapse
oh crap! I just saw the GT-I9100 and thought I was good. I don't remember when I got them originally but just found it again here

Just_s said:
EDIT: One thing that will work for sure, but you'd have to wait for it to come in is a $2 jig. Once you get it, you'll back in business in less than 2 seconds. Mine took 5 days via standard shipping. You could do expedited shipping if you need it faster. In lieu of that, I will keep thinking about what you can do tonight.
Click to expand...
Click to collapse
this will work even though I can get into odin download mode? I can wait a few days instead of buying a new phone if it will really work!

nursemm05 said:
this will work even though I can get into odin download mode? I can wait a few days instead of buying a new phone if it will really work!
Click to expand...
Click to collapse
Yes, the jig should definitely work and it is a good idea to have one around anyway, just in case you ever need to go back to stock to return the phone or something.
But I am certain you can fix it at home in the meantime. I just need to remember or find how.

Just_s said:
Yes, the jig should definitely work and it is a good idea to have one around anyway, just in case you ever need to go back to stock to return the phone or something.
But I am certain you can fix it at home in the meantime. I just need to remember or find how.
Click to expand...
Click to collapse
I am going to order one just in case but in the meantime, going to try one more time to get Odin to cooperate then I'm done for the night. Sadly work calls tomorrow and I can't do any of this on my work computer either thank you SOOO much for all your help!

nursemm05 said:
oh crap! I just saw the GT-I9100 and thought I was good. I don't remember when I got them originally but just found it again here
Click to expand...
Click to collapse
Yeah, definitely not the right files for our phone, but don't worry, yet, I think you can recover from this. The fear is that the radio is borked as those are GSM phones and we are a CDMA phone. I haven't really read much about this issue, but I know it has happened to others. If you have time, you might search around for something like "oops, flashed SGSII GSM files on my E4GT CDMA phone" or something like that and see if anyone else figured out the fix.

I did not think there was a update to 2.3.5 for the epic 4g touch. I thought only the European versions received that update. The only update I know of for our phones was 2.3.6.
Plz link or direct where you downloaded this update you flashed. If it is the European update you will need to install the drivers for that model for Odin to recognize your phone. Then reflash the proper update.
---------- Post added at 10:18 PM ---------- Previous post was at 10:14 PM ----------
Indrid Cole said:
I did not think there was a update to 2.3.5 for the epic 4g touch. I thought only the European versions received that update. The only update I know of for our phones was 2.3.6.
Plz link or direct where you downloaded this update you flashed. If it is the European update you will need to install the drivers for that model for Odin to recognize your phone. Then reflash the proper update.
Click to expand...
Click to collapse
Wow bythe time I typed this all is revealed. The 2.3.5 was the giveaway.
---------- Post added at 10:22 PM ---------- Previous post was at 10:18 PM ----------
Indrid Cole said:
I did not think there was a update to 2.3.5 for the epic 4g touch. I thought only the European versions received that update. The only update I know of for our phones was 2.3.6.
Plz link or direct where you downloaded this update you flashed. If it is the European update you will need to install the drivers for that model for Odin to recognize your phone. Then reflash the proper update.
---------- Post added at 10:18 PM ---------- Previous post was at 10:14 PM ----------
Wow bythe time I typed this all is revealed. The 2.3.5 was the giveaway.
Click to expand...
Click to collapse
It should not kill your radio. I fixed a buddys phone that kinda did the same thing. Main thing is get the drivers for the euro sgs 2. Then Odin should see your device. Then use just s's guide from there.
One last thing the jig is not be needed. You can already get into download mode. Your phone is ready for flashing. What you need are drivers for the the computer to recognize your phone.

Indrid Cole said:
...the European update you will need to install the drivers for that model for Odin to recognize your phone. Then reflash the proper update.
It should not kill your radio. I fixed a buddys phone that kinda did the same thing. Main thing is get the drivers for the euro sgs 2. Then Odin should see your device. Then use just s's guide from there.
Click to expand...
Click to collapse
Yep, this is exactly right.
@nursemm05 you need to find and install the drivers for the phone who's files you flashed. Make sure you know where you save the driver files and where they are installed. In fact, make a backup of your system so that you can restore your PC after you get your ET4G back to good.
Once you can get back into Odin, flash the tar file (singular) that I linked to and you will be back at stock. Then you can hit the other links and you will be very happy with your new setup.
Then do a system restore on your PC to before the i9000 driver's were installed and you should be back to good there as well.
Good luck!

[Q] Gnex wont boot. Cant flash from fastboot (too many links error)

CDMA GALAXY NEXUS> Hey guys, I was running Romanbb's 4.0.4 build earlier today. I clicked on a video (which may or may not have been on a porn site) all of a sudden my screen went all wacky. Where it was kind of fuzzy and running diagnal across the screen. I could only see part of it. I thought I might have gotten a virus or something because i have never had one of my devices do this before. So I immideatly rebooted the phone into recovery and wiped eveything including formatting system. I went to flash a nandroid I had of black ice and in the middle of flashing that my phone rebooted itself and stayed there (bootlooping at the google logo) I can get into fastboot and I can get into recovery about one out of every ten times but I cant do anything in recovery because the phone turns itself off insted of booting recovery most of the time (I have clockwork touch) When I do get into recovery without it turning off it reboots if I try to flash anything. It seems to be stable in fastboot (thank god!) but When I get it connected in Wugs Root tool kit and try to flash the stock image it goes through the motions and says FAILED on every step exept the first (which I believe is checking radio). It says ( error too many links) on the first two) and I cant remember the error on the last four but I have tried it a couple times so I can replicate it if needed. Can anyone tell me what to do from here? I really appreciate in advance!!! If this is a hardware error then I would like to get it back to stock to get it replaced. It is weird that it happened while running a rom. Its not like I messed up while flashing or anything.
ADB will recognize it in Fastboot. I already set all of that up when I rooted. when I try to flash the stock+unroot option on wugfresh's toolbox it errors out on every step like there is something wrong with my internal sd on my phone? Im wondering if I should try odin. IDK? Im hoping somebody who has seen this or had this happen before will save the day and tell me what to do.

lol why did you rush into CWM and start wiping things? you should have let it reboot and it probably could have been a one off..
you can try this http://rootzwiki.com/topic/14145-od...actory-odin-restore-402-with-radios-unrooted/

It is stable in fastboot but in cwr it is still geeking out
It still is glitching in cwr. most of the time it either turns off or reboots when I try to go into cwr. i can wipe but if I flash anything it freezes at the point where it starts writing to storage. I have never seen anything like this before.

I have now tried oden as well
It looks like it is a problem with the hardware. The phone is only a couple months old if that. So I really wish I could flash the stock image or at least get rid of cwm. but that is not looking likely. Here are a couple pics of odin showing the problem. Any guidace would be much appreciated. This SUCKS

Why in the heck are you trying to use Odin?

I can only get into fastboot and odin.
CWM wont let me do anything. it crashes and reboots into a bootloop if I try to flash anything. The poster above suggested odin. I dont know what else to do. Please help if you can!

Can you get a screencap of when it fails fastbooting the stock images?

yes
yes, give me couple min and I will post it. Thank you!
I guess I cant. This is all I get now

drumdestroyer said:
yes, give me couple min and I will post it. Thank you!
I guess I cant. This is all I get now
Click to expand...
Click to collapse
How are you attempting to access fastboot?

Vol + and Vol - and power all at the same time
Vol + and Vol - and power all at the same time from powered off
And oden was Vol - and power at the same time from powered off
Now no matter what I push it goes to the screen with the yellow triangle.

That screen says you (now) have a corrupt partition.
At this point, you must use Odin, which is unfortunate. What URL did you use to download the image? The current image in that thread was on multiupload.

drumdestroyer said:
Vol + and Vol - and power all at the same time from powered off
And oden was Vol - and power at the same time from powered off
Now no matter what I push it goes to the screen with the yellow triangle.
Click to expand...
Click to collapse
during my rooting attempt I had a problem with the two vol buttons. It was quite frustrating. Keep trying them and try pressing the power button a fraction of a second sooner.

I downloaded the one later in the thread
Here's the Modem: http://dl.dropbox.co...15.EK02_LTE.tar
Here's the System: http://dl.dropbox.co...L53F_signed.tar
from this thread on page 3 housry23 posted them from his dropbox:
http://rootzwiki.com/topic/14145-od...restore-402-with-radios-unrooted/page__st__30
there were a couple other posts right around the same time with it but they all were the same file name
I thought I saw the same files in the xda thread i found also
I used that thread because it is the one that the second post linked for me.

drumdestroyer said:
Vol + and Vol - and power all at the same time from powered off
And oden was Vol - and power at the same time from powered off
Now no matter what I push it goes to the screen with the yellow triangle.
Click to expand...
Click to collapse
Send it to me. I might be able to fix it. PM me.
Sent from my Galaxy Nexus using xda premium

loveubuntu said:
during my rooting attempt I had a problem with the two vol buttons. It was quite frustrating. Keep trying them and try pressing the power button a fraction of a second sooner.
Click to expand...
Click to collapse
no luck with that. it seems to only open to the "corupted partision" screen. Thanks for the suggestion.

ljwnow said:
Send it to me. I might be able to fix it. PM me.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I pm'd you to ask how you could fix it. Just wondering if I could do it. I can follow instructions well. I have never had a problem and have been flashing stuff for a year or so. IDK what happened here.

I can't help but I wanted to share that I had a similar experience. I was bonne stock and clicked on a you tube video and my phone immediately shut down and tried to reboot itself, but only would boot loop. I had to manually reformat my partitions to recover. Sounds like your case might be even worse. Still don't know what my problem was.
Sent from my Galaxy Nexus using XDA

Thanks. Any feedback is appreciated.

so you can't get into bootloader or odin screen any more? if so try using a Jig it works to get the phone into odin mode for me. i used the same usb jig i made for the captivate.

I got the same suggestion from someone else. I have to wait until radio shack opens in the morning and I will give it a shot. Otherwise, I went by verizon and they are having samsung send me a replacment. I would much rather keep this one if I can though
I tried flashing the stock image from fastboot and it failed though when I could get there, and I also tried flashing the stock image through oden when I could get there and both failed multiple times so I don't have much hope. I think something broke.
I am headed to radio shack now. Be back soon with a answer as to wheather I can save my baby or not.

phone shuts down/reboots very often

So I thought I would give up my inexperienced life of flashing and possibly bricking my device(sent it in to get jtag repaired), so I attempted to put it back to stock. I got odin up and running, Downloaded(for the most part) the tar that would make it stock again. about 98% into the flashing it failed and made me a little nervous. I later remembered to flash the kernel, and with it, the phone booted up. Fine and dandy one day yadda yadda yadda.
Now comes day 2, and it just randomly turned off and booted again. it got to the little android boot screen, then shut down again, rinse repeat at different times of the boot process, add in some random shutdowns when I'm at the home screen and using my phone and there you have it.
I figured it was using an unfinished stock rom trying it's best to function, so I tried to put in clockwork mod. I did, but it was very difficult as I navigated through clockwork recovery, the phone would select things on its own, making the rooting process a giant pain. With that monkey on my back, I managed to root and install the juggernaut v.5 rom(which totally rocks) to see if the probably persists. The end result was it still happened, but when it didn't, I was able to work with it normally. At this point in time, I am trying to keep my phone turned on because if for a second the screen shuts off, the phone will start trying to shut itself down and game over. This is still very very annoying and was wondering if you fine people would happen to point someone thats green as grass with this stuff in the right direction

s1yfox said:
So I thought I would give up my inexperienced life of flashing and possibly bricking my device(sent it in to get jtag repaired), so I attempted to put it back to stock. I got odin up and running, Downloaded(for the most part) the tar that would make it stock again. about 98% into the flashing it failed and made me a little nervous. I later remembered to flash the kernel, and with it, the phone booted up. Fine and dandy one day yadda yadda yadda.
Now comes day 2, and it just randomly turned off and booted again. it got to the little android boot screen, then shut down again, rinse repeat at different times of the boot process, add in some random shutdowns when I'm at the home screen and using my phone and there you have it.
I figured it was using an unfinished stock rom trying it's best to function, so I tried to put in clockwork mod. I did, but it was very difficult as I navigated through clockwork recovery, the phone would select things on its own, making the rooting process a giant pain. With that monkey on my back, I managed to root and install the juggernaut v.5 rom(which totally rocks) to see if the probably persists. The end result was it still happened, but when it didn't, I was able to work with it normally. At this point in time, I am trying to keep my phone turned on because if for a second the screen shuts off, the phone will start trying to shut itself down and game over. This is still very very annoying and was wondering if you fine people would happen to point someone thats green as grass with this stuff in the right direction
Click to expand...
Click to collapse
I suggest you Odin back to stock. Here is a good guide to Odin back to GB stock:
http://forum.xda-developers.com/showthread.php?t=1513359
Heres a link to Odin back to ICS stock:
http://forum.xda-developers.com/showthread.php?t=1705565.
You can use this App to root your phone afterwards:
http://forum.xda-developers.com/showthread.php?t=1650908
I personally used this thread to Odin CWM then flashed SU later:
http://forum.xda-developers.com/showthread.php?t=1311194
Hope this helps!!

Thanks!
LoopDoGG79 said:
I suggest you Odin back to stock. Here is a good guide to Odin back to GB stock:
http://forum.xda-developers.com/showthread.php?t=1513359
Heres a link to Odin back to ICS stock:
http://forum.xda-developers.com/showthread.php?t=1705565.
You can use this App to root your phone afterwards:
http://forum.xda-developers.com/showthread.php?t=1650908
I personally used this thread to Odin CWM then flashed SU later:
http://forum.xda-developers.com/showthread.php?t=1311194
Hope this helps!!
Click to expand...
Click to collapse
You have definitely earned my thanks for providing such hearty solutions! I am super paranoid now when it comes to downloading files like those. my major concern is if the files never download completely :O I followed what was in that first thread to tooth, and as I installed that md5 towards the end I got a giant fail. regardless, I thank you for the awesome support man:good:

Hmm, try reflashing your recovery. Mount your USB (If you cant, take out your SD card, and mount it on your PC) and place this file on the root of your SD card( Just easier to find this way)
http://sourceforge.net/projects/darksidetools/files/SGH-T989_ClockworkMOD_5.0.2.7.zip/download
Flash it, and restart recovery. Your recovery should act normal, and do a clean install of whatever ROM you wish. By the way, Juggs was my first DD (daily driver) to!!

Superwipe?
LoopDoGG79 said:
Hmm, try reflashing your recovery. Mount your USB (If you cant, take out your SD card, and mount it on your PC) and place this file on the root of your SD card( Just easier to find this way)
http://sourceforge.net/projects/darksidetools/files/SGH-T989_ClockworkMOD_5.0.2.7.zip/download
Flash it, and restart recovery. Your recovery should act normal, and do a clean install of whatever ROM you wish. By the way, Juggs was my first DD (daily driver) to!!
Click to expand...
Click to collapse
that wouldn't happen to be darkside super wipe would it? I just tried it out, and I have the same issue :S
I just re downloaded the stock rom file you flash with odin, but haven't tried it out yet. I really hope it works :/

s1yfox said:
that wouldn't happen to be darkside super wipe would it? I just tried it out, and I have the same issue :S
I just re downloaded the stock rom file you flash with odin, but haven't tried it out yet. I really hope it works :/
Click to expand...
Click to collapse
Lol, no its CWM 5.0.2.7 or aka, CWM non-touch, I got that link from TDJ's OP, he so kindly provided us a link for it. From your OP, it sounds like CWM did not flash correctly, you can flash a recovery within a recovery, you just have to restart it or reboot your phone for it to take into effect. Do you have the T989 or T989D?

lets see
LoopDoGG79 said:
Hmm, try reflashing your recovery. Mount your USB (If you cant, take out your SD card, and mount it on your PC) and place this file on the root of your SD card( Just easier to find this way)
http://sourceforge.net/projects/darksidetools/files/SGH-T989_ClockworkMOD_5.0.2.7.zip/download
Flash it, and restart recovery. Your recovery should act normal, and do a clean install of whatever ROM you wish. By the way, Juggs was my first DD (daily driver) to!!
Click to expand...
Click to collapse
LoopDoGG79 said:
Lol, no its CWM 5.0.2.7 or aka, CWM non-touch, I got that link from TDJ's OP, he so kindly provided us a link for it. From your OP, it sounds like CWM did not flash correctly, you can flash a recovery within a recovery, you just have to restart it or reboot your phone for it to take into effect. Do you have the T989 or T989D?
Click to expand...
Click to collapse
its an sgh t...lets see if 5.0.2.7 can help me :S

no dice man
it still keeps on restarting even after the clockwork

s1yfox said:
it still keeps on restarting even after the clockwork
Click to expand...
Click to collapse
Did you do a clean install? Darkside Superwipe, flash ROM, reboot, wait ten minutes, then reboot?
Sent from AOKP Goodness :-D

Yeah unfortunately it is still randomly rebooting....washing lol

An update to this: all the same symptoms occur, but for some reason when I flashed darkside rom 3 the symptoms occurred less! For example, last night I was able to use this device for 4 hours straight without it acting up. I really wonder what the problem is. I. Mean the thing acts like an angel when in Odin mode, but when it comes. To cwm or anything else it tends to spaz out.

I too have this happening now. I don't know why its been doing it. I was running the latest aokp and than it started rebooting and shutting off. So I went back to my nandroid backup and still continues. Running darkside v7, and problem is still there. Anyone know why this is happening?
It started happening while listening to music.

Here's a logcat, I used catlog right before it shut down. I cannot comprehend what it is trying to say, hopefully one of you can help me out. Thank you.
http://db.tt/kf1iiWqt
Sent from my SGH-T989

Calz- said:
Here's a logcat, I used catlog right before it shut down. I cannot comprehend what it is trying to say, hopefully one of you can help me out. Thank you.
http://db.tt/kf1iiWqt
Sent from my SGH-T989
Click to expand...
Click to collapse
Im beginning to suspect our power buttons may be at fault here.

s1yfox said:
Im beginning to suspect our power buttons may be at fault here.
Click to expand...
Click to collapse
That's exactly what I was thinking. Everytime I would lock my phone with the power button it'll turn off and stay black vibrating. When I lock my phone using screen off and lock app it won't turn off but to unlock it I have to use the power button, than it turns off.
Sent from my SGH-T989 using xda app-developers app

Calz- said:
That's exactly what I was thinking. Everytime I would lock my phone with the power button it'll turn off and stay black vibrating. When I lock my phone using screen off and lock app it won't turn off but to unlock it I have to use the power button, than it turns off.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Bingo. The moment that I touch the power button my phone freaks out and shuts down. If you don't have the stones or craftiness to fix it yourself, you can join me in getting the power button replacement on mobile tech videos

s1yfox said:
Bingo. The moment that I touch the power button my phone freaks out and shuts down. If you don't have the stones or craftiness to fix it yourself, you can join me in getting the power button replacement on mobile tech videos
Click to expand...
Click to collapse
So I went to a T-Mobile store earlier and they told me they can't replace my phone because I'm rooted and they think its the rom, even tho I showed them.
I have to odin flash the original stock rom and go back to T-Mobile to get it replaced.
Know any way you can flash back without an internet connection on a computer?
Sent from my SGH-T989 using xda app-developers app

s1yfox said:
So I tried to put in clockwork mod. I did, but it was very difficult as I navigated through clockwork recovery, the phone would select things on its own, making the rooting process a giant pain. With that monkey on my back, I managed to root and install the juggernaut v.5 rom(which totally rocks)
Click to expand...
Click to collapse
In the non touch clockwork recovery use menu to scroll down. Home to scroll up. Back to go back. And search to select. I figured it out by my power button clicking things.
Sent from my SGH-T989 using xda app-developers app

Calz- said:
So I went to a T-Mobile store earlier and they told me they can't replace my phone because I'm rooted and they think its the rom, even tho I showed them.
I have to odin flash the original stock rom and go back to T-Mobile to get it replaced.
Know any way you can flash back without an internet connection on a computer?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
the only way i know how is through odin. I've done it a few times. at the end of the flashing I find that the phone turns itself off or something which marks it down in odin as a FAIL..when in actuality it flashed....it just needs a kernel flash and it'll all be candysticks and lollipops.
At this point in my phones life though, however, it is increasingly harder to do anything in clockwork since the button is fudged up. I think I might have to pony up 35$, but if you can Odin your phone back to flash and tell T-Mobile/Samsung about it, you can probably get the repair for free

[Q] Samsung t989 Galaxy S II - Bootloop HELP please :(

I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!

still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?

phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.

zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.

If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta

tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?

JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.

sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!

dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know

sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.

JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.

sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.

JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!

sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:

[Q] possbile brick?

The last few days i have found my phone to be stuck with screen off, usually pulling the batt and powering it up again. Although throughout the day it would happen every now and then. It seemed all well yesterday but today i found it frozen again pulled the batt and tryed to power it on and it will not come on.
When plugged into the pc it shows QHSUSB_DLOAD
The GS3 is stock and the last update before the knox addition. It has been bugging me to update for some time now.
Any ideas greatly appreciated , Happy New years

Ligerblue said:
The last few days i have found my phone to be stuck with screen off, usually pulling the batt and powering it up again. Although throughout the day it would happen every now and then. It seemed all well yesterday but today i found it frozen again pulled the batt and tryed to power it on and it will not come on.
When plugged into the pc it shows QHSUSB_DLOAD
The GS3 is stock and the last update before the knox addition. It has been bugging me to update for some time now.
Any ideas greatly appreciated , Happy New years
Click to expand...
Click to collapse
Pull the battery, put it back in, hold volume-, home, and power. It should pull up screen that says warning. If it does its not hard bricked. The QHSUSB DLOAD means hard brick though. You can try THIS method.

joeyhdownsouth said:
Pull the battery, put it back in, hold volume-, home, and power. It should pull up screen that says warning. If it does its not hard bricked. The QHSUSB DLOAD means hard brick though. You can try THIS method.
Click to expand...
Click to collapse
thanks for the reply i was actually thinking bout that one too, is trying a jtag even worth it or just go straight to that method.
no dice on download mode sigh..

Questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNSM

I used the method posted up in http://forum.xda-developers.com/showthread.php?t=2369125.
Phone enters download mode now but using odin and the odin listed in that thread gives me a fail in odin "no pit" and on the phone i get " flash read failure"
looking around seems to sound as if my phone is toast or am i missing something

Ligerblue said:
I used the method posted up in http://forum.xda-developers.com/showthread.php?t=2369125.
Phone enters download mode now but using odin and the odin listed in that thread gives me a fail in odin "no pit" and on the phone i get " flash read failure"
looking around seems to sound as if my phone is toast or am i missing something
Click to expand...
Click to collapse
Try using heimdall
Sent from my SPH-L710 using Tapatalk

​
jesuscash said:
Try using heimdall
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Small update
Got heimdall but i dont have any tars that i can use with it ( they are all MD5 and changing the extension doesn't work)
I looked at utitles and made sure the phone was detected and it is but clicking print PIT gives me a error failed to receive pit size and failed to download PIT file
The phone gives me a flash read failure
Would you happen to have a tar that works? it is a 16gb GS3

Any other ideas i should give a shot?

it seems closer and closer that the board itself is fried , should i look for another motherboard to swap in?