Develop Bugs

Galaxy S II died..

so i was in the middle of a call, and it just died on me.
i was trying to change my vibrating settings on go sms so it doesnt vibrate during calls(because thats annoying)
then out of no where, it cuts off on me and died
i thought it was just a reset but it does not turn on at all
took batteries out, took sim/ memory card out too, still nothing
plugged wire in, doesnt turn on at all, as if it has no life.
current rom is bomb and bullet kernel
any ideas on how to get it up and working..?

dorksturhh said:
so i was in the middle of a call, and it just died on me.
i was trying to change my vibrating settings on go sms so it doesnt vibrate during calls(because thats annoying)
then out of no where, it cuts off on me and died
i thought it was just a reset but it does not turn on at all
took batteries out, took sim/ memory card out too, still nothing
plugged wire in, doesnt turn on at all, as if it has no life.
current rom is bomb and bullet kernel
any ideas on how to get it up and working..?
Click to expand...
Click to collapse
Were you on DaBomb or Bombaridie?r

Definitely sounds dead to me. If you can't get the device turned on, you can't get into recovery or download mode which means you really can't do anything.
I'd start by calling T-Mobile, tell them what happened and see if you can get it replaced under warranty. If it's as dead as you say it is, they probably won't be able to get far enough in to it to find that its been rooted etc...
Good luck

Tell me if you can download mode or recovery. If you cant go to download mode try this way.
1. Pull out battery along with sim card and sd card
2. Hold Up+Down volume buttons
3. Plug in the usb to connect to your pc
4. Put in your battery should work
dorksturhh said:
so i was in the middle of a call, and it just died on me.
i was trying to change my vibrating settings on go sms so it doesnt vibrate during calls(because thats annoying)
then out of no where, it cuts off on me and died
i thought it was just a reset but it does not turn on at all
took batteries out, took sim/ memory card out too, still nothing
plugged wire in, doesnt turn on at all, as if it has no life.
current rom is bomb and bullet kernel
any ideas on how to get it up and working..?
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App

dorksturhh said:
so i was in the middle of a call, and it just died on me.
i was trying to change my vibrating settings on go sms so it doesnt vibrate during calls(because thats annoying)
then out of no where, it cuts off on me and died
i thought it was just a reset but it does not turn on at all
took batteries out, took sim/ memory card out too, still nothing
plugged wire in, doesnt turn on at all, as if it has no life.
current rom is bomb and bullet kernel
any ideas on how to get it up and working..?
Click to expand...
Click to collapse
Use a jig to revive your phone...
Sent from my GT-I9100 using XDA Premium App

Athavan said:
Use a jig to revive your phone...
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Is the jig for the GSII different than the one from the first Galaxy S? Mine died too while trying to root...tried everything to get back into download mode

DavidXSU said:
Is the jig for the GSII different than the one from the first Galaxy S? Mine died too while trying to root...tried everything to get back into download mode
Click to expand...
Click to collapse
Dont have any idea about it.. Search ebay or any other shopping site with keyword galaxy s jig.. In ebay u get it jusy for $8-10...
Sent from my GT-I9100 using XDA Premium App

damit.. even with my description of the phone, you guys still think jig would resurrect it? :\
how many of you guys used jig before? can you tell me your experiences?
yeah im on Bombaridier 3.0 bullet 2.2

Once my galaxy s was dead.. I used jig to recover it.. why, do u have any bad experience with jig?
Sent from my GT-I9100 using XDA Premium App

oh i was just wondering because i've never heard of jig before, so im curious what it could do to my phone

I found one that I got last year for my Vibrant but it wouldn't throw my GSII into download mode so I was wondering if there were newer ones to support GSII or if the old ones were supposed to work.
I just ended up calling T-Mobile for an exchange right now though.

dorksturhh said:
oh i was just wondering because i've never heard of jig before, so im curious what it could do to my phone
Click to expand...
Click to collapse
Search the internet for how jig works... You can buy jig from ebay or any other shopping website.. Costs around 10$.. Very useful one...
Sent from my GT-I9100 using XDA Premium App

DavidXSU said:
I found one that I got last year for my Vibrant but it wouldn't throw my GSII into download mode so I was wondering if there were newer ones to support GSII or if the old ones were supposed to work.
I just ended up calling T-Mobile for an exchange right now though.
Click to expand...
Click to collapse
yes buddy you shouls buy new one..
Sent from my GT-I9100 using XDA Premium App

Try my way before you do the jig
dorksturhh said:
oh i was just wondering because i've never heard of jig before, so im curious what it could do to my phone
Click to expand...
Click to collapse
Sent from AN AMAZING PHONE WITH A FREAKING DENT TT^TT

+1
If this doesn't work you are probably screwed! Sorry
phreshjoker said:
Tell me if you can download mode or recovery. If you cant go to download mode try this way.
1. Pull out battery along with sim card and sd card
2. Hold Up+Down volume buttons
3. Plug in the usb to connect to your pc
4. Put in your battery should work
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
Sent from my SGH-T989 using xda premium

hmmm if i order a jig, its gonna take way too long,
i called tmobile for a replacement instead, they charged me $20 service fee..
so much for the best phone out :\

Lol try phreshs method an you can probably still get into download mode
sent from my real Gs move in silence like lasagna

dorksturhh said:
hmmm if i order a jig, its gonna take way too long,
i called tmobile for a replacement instead, they charged me $20 service fee..
so much for the best phone out :\
Click to expand...
Click to collapse
Meh get an Amaze then. People offered you the best advice and you decline all of it, despite making a thread asking for it.
**The regular Samsung Jig (there's only one kind) works on our device, I have confirmed this myself. AllGamer also made a thread that answers a lot of questions about download mode, binary counter, and the jig itself. Please search before making new threads looking for a savior, only to reject the help. Thanks in advance.

You are one stubborn member -.- i shouldnt even had replied
dorksturhh said:
hmmm if i order a jig, its gonna take way too long,
i called tmobile for a replacement instead, they charged me $20 service fee..
so much for the best phone out :\
Click to expand...
Click to collapse
Sent from AN AMAZING PHONE WITH A FREAKING DENT TT^TT

phreshjoker said:
Tell me if you can download mode or recovery. If you cant go to download mode try this way.
1. Pull out battery along with sim card and sd card
2. Hold Up+Down volume buttons
3. Plug in the usb to connect to your pc
4. Put in your battery should work
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
hey sorry about that, i did your method before hand and it didnt work :\

[Q] HELP! Bricked!

I just bricked my rooted T989. Nothing happens when I hit power (no display) and my PC does not show the drives when I connect via USB. I have tried vol buttons + power (with battery and [no battery + cable]). Does anyone have any ideas as to what I should try next? Is TMO likely to replace/repair my phone even though it had been rooted?

Have you tried getting into download mode? And what caused the brick?
Sent from my SGH-T989 using xda premium

I was flashing a new ROM and it bricked when it finished flashing. It just never rebooted. I can't get into download mode.

TomSilverSpring said:
I was flashing a new ROM and it bricked when it finished flashing. It just never rebooted. I can't get into download mode.
Click to expand...
Click to collapse
What rom did you flash?
Sent from my Hercules using XDA App

This is really embarassing but I somehow stumbled up WickedRom, which is for the I9100, somehow thought it was for T989, and tried to flash it. Obviously a major league screw up. I have requested a replacement from TMO. I just hope they don't hit me with a major financial penalty if Samsung notices that it has been rooted (it was rooted when I tried flashing WickedRom).

TomSilverSpring said:
This is really embarassing but I somehow stumbled up WickedRom, which is for the I9100, somehow thought it was for T989, and tried to flash it. Obviously a major league screw up. I have requested a replacement from TMO. I just hope they don't hit me with a major financial penalty if Samsung notices that it has been rooted (it was rooted when I tried flashing WickedRom).
Click to expand...
Click to collapse
Same thing happened here... I was odining back to stock and the power in my office at work went out... total fail. All Black, no power button, battery pull or Jig will make the phone do anything... anyone find a work around for this... I did this to my VIB before and was able to get it to work again but this just feels bad. Any help is appreciated. Los Angeles area dev's feel free to come play with it.

hey i know im new here but i got the answer... u need 2 odin back 2 stock 4 download mode pull battery plug usb into computer then 2 phone hold vol up and trackpad then insert battery and u will be in download mode also if using CWM dont fix permissions and also dont forget 2 place unzipped recovery file in /system/bin folder and overwrite it over existing file also make sure that cache, data, sdcard ,and system are all unmounted in mounts option of recovery took me 3 days of flashin back 2 stock with odin and soft bricking my phone 2 figure this out hope it helps

http://forum.xda-developers.com/showthread.php?t=1358401
perhaps people should have shown a bit more support?

Your fault !
Damn that sounds bad, big mistake on your part though, differentiating between i9100 and T-989 is key, among the other models too.

Mine did the same thing after doing a backup. I'm in the 30 day grace period and I'm gonna try to take it back in.. Hopefully I get away with it unless I find a way to fix it

blakemoo said:
Same thing happened here... I was odining back to stock and the power in my office at work went out... total fail. All Black, no power button, battery pull or Jig will make the phone do anything... anyone find a work around for this... I did this to my VIB before and was able to get it to work again but this just feels bad. Any help is appreciated. Los Angeles area dev's feel free to come play with it.
Click to expand...
Click to collapse
The power going out Iz the biggest fail ever....definitely my biggest fear and always in back of my head while using odin
Sent from my SGH-T989 using xda premium

TomSilverSpring said:
This is really embarassing but I somehow stumbled up WickedRom, which is for the I9100, somehow thought it was for T989, and tried to flash it. Obviously a major league screw up. I have requested a replacement from TMO. I just hope they don't hit me with a major financial penalty if Samsung notices that it has been rooted (it was rooted when I tried flashing WickedRom).
Click to expand...
Click to collapse
my brother did this exact same thing to our neighbors phone, flashed a I9100 rom into a T989 phone and now it wont turn on at all. unfortunately dont have warranty or insurance. whats the fix to this? will the jig work? or is the phone an expensive paper weight? thanks for any help.

http://www.youtube.com/watch?v=zN7le4GmxZs&feature=youtube_gdata_player
Sent from my SGH-T989 using xda premium

h0use gr00ves said:
my brother did this exact same thing to our neighbors phone, flashed a I9100 rom into a T989 phone and now it wont turn on at all. unfortunately dont have warranty or insurance. whats the fix to this? will the jig work? or is the phone an expensive paper weight? thanks for any help.
Click to expand...
Click to collapse
Only way is to send it to Samsung or get it JTAG. JTAG will probably be cheaper.

[Q] Download Mode Not Working After KP8 Install

I was trying to go back to 2.3.x using ODIN after I installed the KP8 (update for a "leaked" ics) on my phone. Now my computer won't read the phone on download mode. Anyone have a fix for this?
Or do you know if that USB JIG will fix it?

that was not for our phone....malciado....jtag is your only fix
sent from the near past

Yea..... GSM + CDMA = your screwed
There is no leak for ICS for our phones yet.
So you flashed the GSM version.
2 options:
Sprint insurance
or
buy a new phone
No one has been successful at jtag, I wouldn't even waste my time.

kthejoker20 said:
Yea..... GSM + CDMA = your screwed
There is no leak for ICS for our phones yet.
So you flashed the GSM version.
2 options:
Sprint insurance
or
buy a new phone
No one has been successful at jtag, I wouldn't even waste my time.
Click to expand...
Click to collapse
Not even with the USB JIG? No one has tried it?

Its been tried and unsuccessful
sent from the near past

Sigh. Add one more to the list of bricked phones due to flashing an ICS leak meant for the International SGS2. As said above, your only option is to send the phone to JTAG if you want to use it again.
Sent from my SPH-D710 using Tapatalk

So what's the head count up to? 30s?
sent from the near past

I'm screwed. I flashed this phone to Cricket so no insurance. And I doubt Samsung will warranty it if though it has a clean esn with Sprint right?

Can anyone vouch for this?
/watch?v=mjZ7gVK-IE8
youtube video

I wish we all knew how to read

tkemack said:
I wish we all knew how to read
Click to expand...
Click to collapse
What is that suppose to mean?

malcriiado said:
I'm screwed. I flashed this phone to Cricket so no insurance. And I doubt Samsung will warranty it if though it has a clean esn with Sprint right?
Click to expand...
Click to collapse
Look up JTAG on Google. I believe they charge $50 for unbricking service. You'll be out of a phone for awhile, but it's not like the phone is going to do you any good in its current state anyways.
Good luck.
Sent from my SPH-D710 using Tapatalk

Dchibro said:
Look up JTAG on Google. I believe they charge $50 for unbricking service. You'll be out of a phone for awhile, but it's not like the phone is going to do you any good in its current state anyways.
Good luck.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Yea bro just placed my order from Mobile Tech Videos i'll post up how everything went to help others out with this problem. Good thing I kept my EVO for backup

I can vouch that nothing will work. I had someone send me theirs to try and,I installed drivers through Kies, got drivers from XDA, tried a USB jig, hard reset, my SD card with Mobile Odin on it, etc, etc, etc. If when you hold volume up and power and you have the green Android guy holding a box and your phone says I9100, its jtag or nothing. I spent a week (about an hour a day) trying everything. If your phone powers on but you can't connect to wifi or SD card isn't recognized and no network is found, don't even waste your time. I tried because I hoped I could pull it off with the help of some of the great minds from around here but it just wouldn't be recognized by Odin....and it does beep when I plug it into my laptop....so close yet so far
Sent from my SPH-D710 using xda premium

JohnCorleone said:
I can vouch that nothing will work. I had someone send me theirs to try and,I installed drivers through Kies, got drivers from XDA, tried a USB jig, hard reset, my SD card with Mobile Odin on it, etc, etc, etc. If when you hold volume up and power and you have the green Android guy holding a box and your phone says I9100, its jtag or nothing. I spent a week (about an hour a day) trying everything. If your phone powers on but you can't connect to wifi or SD card isn't recognized and no network is found, don't even waste your time. I tried because I hoped I could pull it off with the help of some of the great minds from around here but it just wouldn't be recognized by Odin....and it does beep when I plug it into my laptop....so close yet so far
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
That Volume Up + Power does work. So you haven't looked into Mobile Tech Vids' method?

malcriiado said:
That Volume Up + Power does work. So you haven't looked into Mobile Tech Vids' method?
Click to expand...
Click to collapse
If you have a link great. If not I will search in the am. It gets sent back to owner. As soon as I am about to send back another idea pops up
Sent from my Nexus S 4G using xda premium

malcriiado said:
Yea bro just placed my order from Mobile Tech Videos i'll post up how everything went to help others out with this problem. Good thing I kept my EVO for backup
Click to expand...
Click to collapse
Josh is good. You are in good hands
Sent from my SPH-D710 using Tapatalk

I flashed my wife's phone and ended up with this same issue. I tried everything with no success. Luckily the phone was within the 14 day period and was able to return it and get a replacement.
Just told them the battery would not last 4 HRS, it was fully stock besides the bootloader.
Odin wouldn't recognize it but the pc would. Tried mobile Odin, tried flashing anything and everything, nothing would work.
Sent from my SPH-D710 using xda premium

malcriiado said:
What is that suppose to mean?
Click to expand...
Click to collapse
Deleted post. Now responding with *sigh*
Let me get one more in just to cover the 101st thread we'll have on this by Friday. *sigh*

KCRic said:
Deleted post. Now responding with *sigh*
Let me get one more in just to cover the 101st thread we'll have on this by Friday. *sigh*
Click to expand...
Click to collapse
Asking for help not helpless remarks, if want to keep doing that I also live in Kansas City just in case you want to keep goin at it. Let's keep these forums full of usefull tools not full of useless comments.

Hard bricked sprint gsIII but read!!!!

have a sprint galaxy s 3 here.
someone tried to flash an international rom therefor flashing the gsm stuff.
i cant access download mode at all however i did install the QHSUSB_drivers.
now with odin 3.07 the .com box will not light up however on previous versions of odin for ex odin v1.85 the .com box will light. im trying to flash the cdma bootloader for the sprint version and it doesnt fail just hangs at setup connection.
any ideas?

vabeachfc3s said:
have a sprint galaxy s 3 here.
someone tried to flash an international rom therefor flashing the gsm stuff.
i cant access download mode at all however i did install the QHSUSB_drivers.
now with odin 3.07 the .com box will not light up however on previous versions of odin for ex odin v1.85 the .com box will light. im trying to flash the cdma bootloader for the sprint version and it doesnt fail just hangs at setup connection.
any ideas?
Click to expand...
Click to collapse
Have you tried following the steps on this thread http://forum.xda-developers.com/showthread.php?t=1727171 ? Also they may be able to help you out more than the QA section.
Edit: Sorry posted the wrong link.

yes ive tried that way.

any ideas welcome

did you switch to download mode/
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.

^^^^He cannot get to dl mode it is hard bricked.
And to the op-
Unlike some devices where this was a savior it is worthless to us. You are hard bricked. Go get some jtag as this mode won't help you
I tried for a few days to talk to this phone in that mode.Using everthing from odin to cdma workshop to qpst to emma. Nothing will do it trust me

It was a customer phone i dont brick phones.
Sent from my Galaxy Nexus using xda app-developers app

vabeachfc3s said:
It was a customer phone i dont brick phones.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
At least its not urs then. Well be happy ur not the owner of a shiny doorstop and let the customer know its a paperweight and they need JTAG.:good:

All he have to do is call Samsung and they will replace it you have a year factory warranty as long as theres no physical damage. They send the phone fast. I did it four times already don't waste your time looking for solution just tell them it won't boot just turned off and won't start that's all i said. You don't have to have insurance either.
Sent from my SPH-L710 using XDA Premium App

bonebeatz1234 said:
All he have to do is call Samsung and they will replace it you have a year factory warranty as long as theres no physical damage. They send the phone fast. I did it four times already don't waste your time looking for solution just tell them it won't boot just turned off and won't start that's all i said. You don't have to have insurance either.
Sent from my SPH-L710 using XDA Premium App
Click to expand...
Click to collapse
Really? You've done this four times? I'd be interested in if anyone else has had such luck? Seems like they would try to turn on the device or figure out whats wrong when they get it back. Thats awesome though!

thatisandwas said:
Really? You've done this four times? I'd be interested in if anyone else has had such luck? Seems like they would try to turn on the device or figure out whats wrong when they get it back. Thats awesome though!
Click to expand...
Click to collapse
I can vouch for that cause I've had to swap out my 1st. Maybe not due to that particular reason, but still, if it doesn't light up they gets frustrated and swap time.
Sent from my SPH-L710 using xda premium

bonebeatz1234 said:
All he have to do is call Samsung and they will replace it you have a year factory warranty as long as theres no physical damage. They send the phone fast. I did it four times already don't waste your time looking for solution just tell them it won't boot just turned off and won't start that's all i said. You don't have to have insurance either.
Sent from my SPH-L710 using XDA Premium App
Click to expand...
Click to collapse
I used to have an Epic 4G Touch and yesterday accidentally flashed a kernel for it on my S3. I was left with a beautiful pebble blue coffee table piece. I started to freak out because I couldn't power on or anything. Long story short, I purchased my phone less than 14 days ago so I took it back to the store. The technician took a look at it, couldn't power it on and they gave me a replacement phone, no questions asked!!

I promise if you hard bricked hell or even soft bricked you can get it exchanged from Samsung as long as it's been less than a year and no water damage or cracked screen .I really think they don't look into all the rooting stuff they just install new software in the phone and send it right back out to someone else which works for me.
If you go threw your carrier avoid it they ask to much question call Samsung and i sware they will send you a new or refurbished phone but a working one and that's all you can ask for and i didn't pay a dime the box they send you to send your phone is prepaid by them i just put my bricked phone in there then dropped it off to ups. I will say this two times i wasn't at home and ups left the damn phone in the box right on my door step than goodness no one stole it.
Sent from my SPH-L710 using XDA Premium App

Hard? Soft? brick galaxy s3 t999

Hey, I flashed I9300 rom on my T999 and after it turned off, it never turned back on again. It won't turn on/ download mod/ recovery mode or vibrate. If I take the battery out and plug it in the PC, it LED turns red for a short period of time only. I did a little research and it was no help. Will a usb jig work? Mine is Tmobile version 2 years contract and I got it in Dec 2012, is it still covered?
UPDATE: I saw one on ebay for half price, which is $30, is it reliable? Have anyone here used the service on ebay?

vietthanh1206 said:
Hey, I flashed I9300 rom on my T999 and after it turned off, it never turned back on again. It won't turn on/ download mod/ recovery mode or vibrate. If I take the battery out and plug it in the PC, it LED turns red for a short period of time only. I did a little research and it was no help. Will a usb jig work? Mine is Tmobile version 2 years contract and I got it in Dec 2012, is it still covered?
Click to expand...
Click to collapse
A couple options.
1.) File insurance claim with asurion if you have that
2.) Send to samsu ng but more costly
3.) Send to mobiletechvideos.com $60 and you'll have it fast and fixed.
Yes if you flashed an Intl ROM your phone is bricked. Good luck
Sent from my SGH-T999 using xda app-developers app

monkeypaws said:
A couple options.
1.) File insurance claim with asurion if you have that
2.) Send to samsu ng but more costly
3.) Send to mobiletechvideos.com $60 and you'll have it fast and fixed.
Yes if you flashed an Intl ROM your phone is bricked. Good luck
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Is mobiletechvideo reliable? I don't mind spending $60 but will they come and pick up at my door or I have to go send it?

vietthanh1206 said:
Is mobiletechvideo reliable? I don't mind spending $60 but will they come and pick up at my door or I have to go send it?
Click to expand...
Click to collapse
a USB jig will not work in this case.
Yes they are reliable. You will have to send them your phone, on their website they have instructions on how to send them the phone.
|When Emotion Goes Up, Logic Goes Down|
|Even If You Fall Face First You're Still Moving Forward|

send it in for jtag repair but next time you flash read around more so you dont run into trouble. good luck :good:

vietthanh1206 said:
Is mobiletechvideo reliable? I don't mind spending $60 but will they come and pick up at my door or I have to go send it?
Click to expand...
Click to collapse
do chickens lay eggs? dont worry, we wouldnt let you use a shady phone service man

yeah man, just send it to mobiletech videos. They have a few youtube videos too to show you how they'll do it. I did the same to my s3 a while back sent it to them and got back a week for date I shipped it to them. I did get the express overnight return shipping for extra $20.00. I recommend you get it too if you can or get the $15.00 rush processing where they fix on first or second day, otherwise can take as many as 4 days to fix if they have a lot if business. Mines was done in 3 days. Anyway hope that helped, I guarantee you have nothing to fear sending it to them if you decide to.
Sent from a galaxy far away using xda premium

KingKostas said:
send it in for jtag repair but next time you flash read around more so you dont run into trouble. good luck :good:
Click to expand...
Click to collapse
ziggy46 said:
do chickens lay eggs? dont worry, we wouldnt let you use a shady phone service man
Click to expand...
Click to collapse
Cyphers23 said:
yeah man, just send it to mobiletech videos. They have a few youtube videos too to show you how they'll do it. I did the same to my s3 a while back sent it to them and got back a week for date I shipped it to them. I did get the express overnight return shipping for extra $20.00. I recommend you get it too if you can or get the $15.00 rush processing where they fix on first or second day, otherwise can take as many as 4 days to fix if they have a lot if business. Mines was done in 3 days. Anyway hope that helped, I guarantee you have nothing to fear sending it to them if you decide to.
Sent from a galaxy far away using xda premium
Click to expand...
Click to collapse
Thanks, I'll reach for help from my older sister because I got no credit card and no car to go to the post office lol.

Hello,
last night i ran into this same problem with my sgh-t999. The phone will power up to the Samsung Galaxy s3 screen. I can also get into download mode and cwm. I am hoping this means that phone has been soft bricked.
As far as why my phone did this...I booted into cwm and i did a restore through the menu options. I'm not sure if i hit the wrong one, or what exactly happened at this point. Whatever it was loaded and i was unable to get past the gs3 screen.
I tried loading that .Tar file from the link provided by "Theexcel". However, in the tutorial, it says to make sure that the flash counter is set back at zero. How can i do this when my phone won't power on. I am not aware of how to reset the counter without getting an app from Playstore.
As you can see, i am new to the forum. I posted here because this seems to be a similar topic. Please let me know if you have any ideas. I tried to address what i think my be wrong with the phone and some of the steps i have done to try and repair it already. I will gladly provide answers to more specific questions.

nickcross88 said:
Hello,
last night i ran into this same problem with my sgh-t999. The phone will power up to the Samsung Galaxy s3 screen. I can also get into download mode and cwm. I am hoping this means that phone has been soft bricked.
As far as why my phone did this...I booted into cwm and i did a restore through the menu options. I'm not sure if i hit the wrong one, or what exactly happened at this point. Whatever it was loaded and i was unable to get past the gs3 screen.
I tried loading that .Tar file from the link provided by "Theexcel". However, in the tutorial, it says to make sure that the flash counter is set back at zero. How can i do this when my phone won't power on. I am not aware of how to reset the counter without getting an app from Playstore.
As you can see, i am new to the forum. I posted here because this seems to be a similar topic. Please let me know if you have any ideas. I tried to address what i think my be wrong with the phone and some of the steps i have done to try and repair it already. I will gladly provide answers to more specific questions.
Click to expand...
Click to collapse
I got hard brick which means it cannot get into download mode or anything, the screen won't even turn on. Lucky you just got soft brick. I need to spend $80 bucks for jtag fix and fast shipping.

Cyphers23 said:
yeah man, just send it to mobiletech videos. They have a few youtube videos too to show you how they'll do it. I did the same to my s3 a while back sent it to them and got back a week for date I shipped it to them. I did get the express overnight return shipping for extra $20.00. I recommend you get it too if you can or get the $15.00 rush processing where they fix on first or second day, otherwise can take as many as 4 days to fix if they have a lot if business. Mines was done in 3 days. Anyway hope that helped, I guarantee you have nothing to fear sending it to them if you decide to.
Sent from a galaxy far away using xda premium
Click to expand...
Click to collapse
If I send my phone in, will it cause any problems if I remove my sim card to use in another phone? I need my phone for work. Does anybody see this cause potential problems?

nickcross88 said:
Hello,
last night i ran into this same problem with my sgh-t999. The phone will power up to the Samsung Galaxy s3 screen. I can also get into download mode and cwm. I am hoping this means that phone has been soft bricked.
As far as why my phone did this...I booted into cwm and i did a restore through the menu options. I'm not sure if i hit the wrong one, or what exactly happened at this point. Whatever it was loaded and i was unable to get past the gs3 screen.
I tried loading that .Tar file from the link provided by "Theexcel". However, in the tutorial, it says to make sure that the flash counter is set back at zero. How can i do this when my phone won't power on. I am not aware of how to reset the counter without getting an app from Playstore.
As you can see, i am new to the forum. I posted here because this seems to be a similar topic. Please let me know if you have any ideas. I tried to address what i think my be wrong with the phone and some of the steps i have done to try and repair it already. I will gladly provide answers to more specific questions.
Click to expand...
Click to collapse
Following these instructions below will get you back to a stock rooted phone which works perfectly.
The very best advise is to do the following, doing anything else will most likely prolong
the problems you are having or making them even more difficult to resolve.
First thing you need to do is to install the stock Tmobile T999 rooted firmware.
Here are the exact step by step instructions with the download link for the firmware.
After you have followed these instructions your phone will be working properly and if
you like you will be able to flash any custom roms made for the Tmobile T999 phone
or restore any backups unless the the backup is corrupted in some way or another.
Here is the link to the Tmobile Stock & Rooted firmware you need:
http://www.androidfilehost.com/?fid=9390169635556426451
After downloading it make a folder on your desktop and unzip the file
using Winzip or 7zip so the .TAR file is in the new folder you just made.
Here is a link for ODIN which is required for flashing the stock rooted firmware
(a windows app) http://d-h.st/Q14
Download and extract Odin into the same folder you made containing the TAR file.
Here is a step by step guide for you.
Download the firmware of your choosing (use the root66 version if you want root)
Run Odin by double clicking the Odin.exe within the folder you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the FW you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache! (It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!

nickcross88 said:
If I send my phone in, will it cause any problems if I remove my sim card to use in another phone? I need my phone for work. Does anybody see this cause potential problems?
Click to expand...
Click to collapse
No actually, when you send it in they ask you to only send in your bare phone, no battery, sim/sd card just the phone itself. So yeah you can switch out to another phone while waiting.

Try searching craigslist for JTAG repair.
My buddy found a local repair shop for $60. He picked it up the next day.
A USB jig will get your phone into download mode if soft bricked and costs $3.
transmitted from my SGH-T999.

phantomthuggie said:
Try searching craigslist for JTAG repair.
My buddy found a local repair shop for $60. He picked it up the next day.
A USB jig will get your phone into download mode if soft bricked and costs $3.
transmitted from my SGH-T999.
Click to expand...
Click to collapse
I don't know any local so I asked my older sister to sent it to the mobilevideo guy. Not sure when they'll send it back. Hopefully next friday or the following Monday :good:

Hey guys, I just want to let you guys know that I got my phone fully working in the mail box today. Thanks Mobiletechvideo :laugh:
Definitely recommend to anyone who got hard bricked.

vietthanh1206 said:
Hey guys, I just want to let you guys know that I got my phone fully working in the mail box today. Thanks Mobiletechvideo :laugh:
Definitely recommend to anyone who got hard bricked.
Click to expand...
Click to collapse
I'm a witness lol
Sent from my Nexus 4 using xda premium

After a week of using, seems to work perfectly.

vietthanh1206 said:
After a week of using, seems to work perfectly.
Click to expand...
Click to collapse
Yeah, their work is professionally done. That's why they are so highly recommended by everyone. Myself included.
Sent from a Galaxy far away using xda premium

hey guys quick info thing. my phone had sudden death. nothing would work. had a disc with axeman who informed me of MT for jtag. long story short i found this dude named Joe on ebay. from seattle to Mich, repaired at half the price.. this dude rocks and is pleasent to deal with. like i said you ship it to him 1 or 2 day, i went with 2 small sups box, just the phone and back, wuld have gotten it in four had it not been sunday
search Unbrick Samsung Galaxy S .. mipick22..29.00$ .. just a heads up . ink