Develop Bugs

HELP - HTC Desire Can't access to fastboot (Recovery) - I have S-OFF

Hi,
your help is very apreciated.
I have a HTC Desire (Bravo) and MIUI rom. Today, I try to update the ROM version from 2.3.4.a1 to 2.3.5.a1, I simply go to recovery, and make clear cache, clear Dalvik and install de new rom.
After, the phone start well, but when I make the first reboot, the phone get in a loop on rom (Miui) boot screen and never start (only turn off taking off the battery).
When I try to get into recovery using fastboot, it doesn't work, I push vol down + power, but the Desire always start normaly and freeze in boot screen, fastboot NEVER is showed.
Can you help me please?
p.d:I have the S-Off
Thank you in advance

Try pressing the 'Back' button and power instead. If you can get in to that then it can be fixed.

Parva4 said:
Try pressing the 'Back' button and power instead. If you can get in to that then it can be fixed.
Click to expand...
Click to collapse
Thank you very much!!! it works with this combo.

Hi,
I have a very similar scenario, also MIUI, but the back button + power does not work.
Any ideas?
Thanks.

Have You tried to turn it off an on again?
SCNR

Minz0r said:
Have You tried to turn it off an on again?
SCNR
Click to expand...
Click to collapse
I finally gained access after removing the battery and make a new attempt.
Thank you for your answer.
Greetings.

HTC Desire stuck in hboot screen, no recovery
Well, the phone is/was rooted. I can get into hboot but not recovery. This is a blank sd card also. It was working good, then updated the ROM and now its screwed. Please help. I have been looking all over these forums and nothing. By the way, I dont screw with phones at all. I pay others to do it. LOL, but now I have to do it myself. I need a play by play. PLease help. Thank you

Uonites said:
Well, the phone is/was rooted. I can get into hboot but not recovery. This is a blank sd card also. It was working good, then updated the ROM and now its screwed. Please help. I have been looking all over these forums and nothing. By the way, I dont screw with phones at all. I pay others to do it. LOL, but now I have to do it myself. I need a play by play. PLease help. Thank you
Click to expand...
Click to collapse
we would love to help you out buddy.....but you need to give us further details of your issue such as;
- is your SD a Gold Card?
- were you still able to boot into normal mode?
- what is the ROM you are talking about?
- what is your Hboot?
- is your phone S-On or S-Off?
- what were the attempts you have made in trying to resolve the issue?
If you could provide such details or more than that then you put the chances of resolving your problem as fast as it can be.
Cheers mate.

getting Wired colored display on desire
I've Used RUU_Bravo_hTC_Asia_India_1.21.720.4_Radio_32.36.00.28U_4.06.00.02_2_release_127705_signed but Its giving error 110 and I even dont have a gold card.. After watching this thread I've got confused.. Please help me Out!!!

n33l_ray said:
I've Used RUU_Bravo_hTC_Asia_India_1.21.720.4_Radio_32.36.00.28U_4.06.00.02_2_release_127705_signed but Its giving error 110 and I even dont have a gold card.. After watching this thread I've got confused.. Please help me Out!!!
Click to expand...
Click to collapse
- were you still able to boot into normal mode?
- what is the ROM you are talking about?
- what is your Hboot?
- is your phone S-On or S-Off?
- what were the attempts you have made in trying to resolve the issue?
- why r u using a ruu in the first place?

getting Wired colored display on desire
I think there is no HBOOT currently in my phone.When I put battery into it n press the power button after 3-4mins getting wired colors on display.. This is present condition of my phone.. Please tell me what should I do.. Thanks in advance!!

n33l_ray said:
I think there is no HBOOT currently in my phone.When I put battery into it n press the power button after 3-4mins getting wired colors on display.. This is present condition of my phone.. Please tell me what should I do.. Thanks in advance!!
Click to expand...
Click to collapse
Take battery out and put it back in
Hold volume down and power button
What happens?

Nothing is happening with Volume down n power button. Only when I'm pressing the power button The display is giving different weird colors after 2-3 minuites. Please help me out.

Get on your computer, make sure you have the Android SDK installed (you need adb), open up a command prompt and run "adb reboot bootloader" to get into HBOOT or "adb reboot recovery" to boot into recovery. Keep sending one of these commands until it works. You could also run "adb devices" multiple times during boot to find out if your phone is recognized at some point. If it is, the above commands will work.

Well right now its condition is a little better I think.. When I press Vol down n power key Getting a white HTC printed black display with "! sign each four corners. My pc's device manager also detecting "My HTC" inside "Android USB devices" n when I pull-off the data cable getting white display with the information below:
BRAVO PVT4 SHIP S-OFF
HBOOT-0.93.001
MICORP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
AUG 10 2010,17:52:10
RUU
What should I do Now????

n33l_ray said:
Well right now its condition is a little better I think.. When I press Vol down n power key Getting a white HTC printed black display with "! sign each four corners. My pc's device manager also detecting "My HTC" inside "Android USB devices" n when I pull-off the data cable getting white display with the information below:
BRAVO PVT4 SHIP S-OFF
HBOOT-0.93.001
MICORP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
AUG 10 2010,17:52:10
RUU
What should I do Now????
Click to expand...
Click to collapse
Go to htc dev site and download 2.3 RUU and run it from your PC. You will have to do s-off and root again (using revolutionary) but iy's easy.
Sent from my HTC Desire using flashes and thunders

nlooooo said:
Go to htc dev site and download 2.3 RUU and run it from your PC. You will have to do s-off and root again (using revolutionary) but iy's easy.
Sent from my HTC Desire using flashes and thunders
Click to expand...
Click to collapse
Thanks a lot for your advice but Wana ask a quistion.. I've ran "RUU_Bravo_hTC_Asia_India_1.21.720.4_Radio_32.36.00.28U_4.06.00.02_2_release_127705_signed" this one before n got error 110 n bricked my desire totally with weired colors on display.. Even I was unable to get into fast boot mode... Are you sure your mathod will work?

n33l_ray said:
Thanks a lot for your advice but Wana ask a quistion.. I've ran "RUU_Bravo_hTC_Asia_India_1.21.720.4_Radio_32.36.00.28U_4.06.00.02_2_release_127705_signed" this one before n got error 110 n bricked my desire totally with weired colors on display.. Even I was unable to get into fast boot mode... Are you sure your mathod will work?
Click to expand...
Click to collapse
Preety sure because 2.3 RUU is made for all versions of devices no matter of region. You probably have slcd device and RUU that you flashed is amoled with wrong cid.
Sent from my HTC Desire using flashes and thunders

nlooooo said:
Preety sure because 2.3 RUU is made for all versions of devices no matter of region. You probably have slcd device and RUU that you flashed is amoled with wrong cid.
Sent from my HTC Desire using flashes and thunders
Click to expand...
Click to collapse
Well then I'll surely do that.. Can you please give me 2.3 RUU download link ?

n33l_ray said:
Well then I'll surely do that.. Can you please give me 2.3 RUU download link ?
Click to expand...
Click to collapse
I can't give you the link. Go to htc dev site, kernel source code section, configure filter by device (desire), mark OTHER below, click on find files and the first file on the list will be 2.3 upgrade. Download it and run it from your PC. Don't forget to install htc sync before running RUU exe.
Sent from my HTC Desire using flashes and thunders

HTC DESIRE unroot with RUU 2.3.3 failed

Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!

i_cs_u said:
Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!
Click to expand...
Click to collapse
plug the phone in then turn it on, tell us what it says

bortak said:
plug the phone in then turn it on, tell us what it says
Click to expand...
Click to collapse
It doesn`t say anything.
This is what I do:
1. Take the battery out.
2. Put the battery back in place
3. Try turning phone on using: Volume-down+Power -> the phone doesn`t show anything, it simply takes me to the HTC logo(white HTC logo on black background. It does the same thing if I turn it on using BACK+Power)
If I try running the RUU again, the installer gives me the next message: Error[152]: image update error.
From what I`ve read, this is a radio error which can only be fixed by hTC. Could that be true?
Also, after the RUU gives me the above error, if I unplug the USB cable, the phone shows following:
*************
RUU
Radio_V2 - OK
Splash1 - OK
Recovery - OK
Splash2 - OK
Radio_cust - OK
Bootloader - Bypassed
Userdata - OK
System - Fail-PU
Boot - OK
Partition update fail!
Update fail!
*************
I have the Alpharev CM7 r2 bootloader.

even if it is its covered by htc warranty so don't worry about it

I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.

i_cs_u said:
I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.
Click to expand...
Click to collapse
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.

Yes, I`m still S-OFF.
How do I flash them if I can`t access recovery using Volume-down+Power or BACK+Power?
I`ve downloaded the first one, renamed it into PB99IMG.zip, put it on root of SD CARD, turned phone ON and it takes me to the same htc logo screen as before.
LE
Tried with Android Flasher, but it gets stuck when trying to flash the bravo_alphaspl.img that u`ve given me.
So basically, I can`t enter Clockworkmod, I can`t enter the bootloader menu by turning on phone usine Volume-down+Power / Back+Power, and the phone is stuck in the HTC logo, while still S-OFF-ed, also the 2.3.3 official RUU gives me the error at the end of the installing process.
Does anyone have any idea what I could do?

Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.

i_cs_u said:
Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.
Click to expand...
Click to collapse
Haha it's cool dude but if I ever visit I may holla at you for some of those beers though

I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?

Flash bravo_downgrade.img and then the RUU.

Holabalola said:
I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?
Click to expand...
Click to collapse
bootloader/hboot/spl

Nevermind, I got it to work

So write how to help others and if we helped you, use the thanks-button.

bortak said:
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.
Click to expand...
Click to collapse
Thanks for this. Returning desire tomorrow (switching networks) and forgot to resize and downgrade hboot before running ruu. Good job I ran into this thread for a reminder!

hey, i have a same problem as i_cs_u and dont know how to solve it, can someone give me explained proces?

Did you read the whole thread????

yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?

HTC_Desire_luka__ said:
yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?
Click to expand...
Click to collapse
He probably figured out that he has to use the fastboot flash boot *name of img* command or Android Flasher on that screen with the 4 ! At the corner instead of renaming to PB99IMG and attempting to flash it on the phone.
Sent from my HTC Original Desire with Android 4.0.1 ICS using Tapatalk

but i dont know how to do it from fastboot. i need an explaination of the process.

HTCDEV HBOOT -> brick

I tried installing the htcdev hboot extracting the rom.zip -> PB99IMG.zip using a Goldcard and Fastboot yesterday.
All went fine, but after the reboot the screen just stayed black.
Now when I try to get into Hboot, Fastboot, or a regular boot - all that happens is a black screen.
When connectiong power without battery the leds flash green and orange (as normal) and it still charges the battery.
Any advice?
S-ON, HTC_102, won't show in fastboot when I try to get into Hboot, Fastboot, or a regular boot.
No buzz when trying to turn it on.

excogitation said:
I tried installing the htcdev hboot extracting the rom.zip -> PB99IMG.zip using a Goldcard and Fastboot yesterday.
All went fine, but after the reboot the screen just stayed black.
Now when I try to get into Hboot, Fastboot, or a regular boot - all that happens is a black screen.
When connectiong power without battery the leds flash green and orange (as normal) and it still charges the battery.
Any advice?
S-ON, HTC_102, won't show in fastboot when I try to get into Hboot, Fastboot, or a regular boot.
No buzz when trying to turn it on.
Click to expand...
Click to collapse
I had the same problem about a year ago. Unfortunately it means the hboot flashing DIDN'T go fine. The HBOOT didn't flash, or got corrupted somehow, effectively leaving your phone as a brick. I took mine to the service provider and they did a motherboard swap under warranty. Sorry for the bad news, but from my experience there's no way to recover without opening up the phone.

Lazer Fazer said:
I had the same problem about a year ago. Unfortunately it means the hboot flashing DIDN'T go fine. The HBOOT didn't flash, or got corrupted somehow, effectively leaving your phone as a brick. I took mine to the service provider and they did a motherboard swap under warranty. Sorry for the bad news, but from my experience there's no way to recover without opening up the phone.
Click to expand...
Click to collapse
JTAG is fine with me - I just haven't found the necessary files/commands to flash it yet.

In my sig you have an explanation how it all works, so I think you have hboot brick. If your screen stays black no matter how you turn it on, that's it.
Sent from my HTC Desire using Flashes and Thunders

nlooooo said:
In my sig you have an explanation how it all works, so I think you have hboot brick. If your screen stays black no matter how you turn it on, that's it.
Sent from my HTC Desire using Flashes and Thunders
Click to expand...
Click to collapse
Really good explanation. btw my hboot dead looks a little different and I can't see the the 4 exclamation mark situation in your brick guide
So not even with JTAG?

excogitation said:
I tried installing the htcdev hboot extracting the rom.zip -> PB99IMG.zip using a Goldcard and Fastboot yesterday.
Click to expand...
Click to collapse
I am curious. What were you trying to do? You could have just run the 2.3 RUU ? BTW from htcdev you get the 2.3 RUU which does not require a goldcard.

handy5876 said:
I am curious. What were you trying to do? You could have just run the 2.3 RUU ? BTW from htcdev you get the 2.3 RUU which does not require a goldcard.
Click to expand...
Click to collapse
No I couldn't, because it wouldn't boot past the HTC screen anymore without adb working (got the phone in that state).
I also had the WWE_2.29.405.5 prepared to flash via Goldcard, but I didn't expect the hboot flash to fail.
Bad luck or what did I miss?

Can you boot to fastboot/bootloader?
Sent from my HTC Desire using Flashes and Thunders

excogitation said:
No I couldn't, because it wouldn't boot past the HTC screen anymore without adb working (got the phone in that state).
I also had the WWE_2.29.405.5 prepared to flash via Goldcard, but I didn't expect the hboot flash to fail.
Bad luck or what did I miss?
Click to expand...
Click to collapse
But you said you used fastboot earlier. You could have executed 2.3 RUU from PC while the device was in fastboot mode.

handy5876 said:
But you said you used fastboot earlier. You could have executed 2.3 RUU from PC while the device was in fastboot mode.
Click to expand...
Click to collapse
Ah, I tried that before on my windows machine but I couldn't get RUU to recognize the device - that might have been because of the unrevoked driver though ... not sure.

And again, can you boot your phone to fastboot/bootloader???

Hello,
need help please. I have the same problem. I have not access to fastboot (black screen), the phone don't boot (black screen), have not acces to recovery .
when i plug the cherger with battery, I have red led. when un unblug the battery , and I charge the phone , I have blink led ( red and green)
when I hold volum up and press power , the phone vibrate and I have green led. the phone is detected as Qualcomm CDMA ...
the problem appeared when I flash the HBOOT
Thank you

First which phone do you have (gsm or cdma)?
Then what kinda hboot did you flash?
Sent from my HTC Desire using Flashes and Thunders

nlooooo said:
First which phone do you have (gsm or cdma)?
Then what kinda hboot did you flash?
Sent from my HTC Desire using Flashes and Thunders
Click to expand...
Click to collapse
I think is gsm . P/N:99hkz061-00 . HTC bravo A8181
brevious hboot : cm7r2 . and I flash stock hboot . after reboot, black screen.

Try to restart it with power+volume down and connect it to PC. If PC recognizes the phone, it's on no matter that screen is off. Try to see if fastboot commands work in that state and try to flash downgrader and then to run 2.3 ruu.

nlooooo said:
Try to restart it with power+volume down and connect it to PC. If PC recognizes the phone, it's on no matter that screen is off. Try to see if fastboot commands work in that state and try to flash downgrader and then to run 2.3 ruu.
Click to expand...
Click to collapse
The pc don't detect my phone (in bootloader , and in fastboot mode) (always blaxk screen). and fastboot... give < waiting for device >

You have the hboot brick and the only solution is riffbox.

Thank's a lot for your help

[Q] Major problem HTC HDH. Need immediate help.

I've tried to install this --> RUU_Ace_HTC_WWE_1.15.405.1_Radio_12.21.60.12_26.02.00.09_M_test_148662. I thought it was some kind of downgrade, because i couldn't downgrade with Ace Hack Kit. In the midlle of installation, about 22%, when my HDH rebooted, said error, now my phone won't even boot antything, only when I put it to charge it shows orang led indicator, and after some time it shows black screen with silver HTC screen.. :/ Desperate, any kind of help, suggestion please..

Connect it through the ace hack kit, and start from scratch.
did it automatically download the downgrade ruu? Or is that one you downloaded yourself? Did you disconnect it thinking it had finished or something?
Sent from my HTC Desire HD using xda app-developers app

dannyboy_uk12 said:
Connect it through the ace hack kit, and start from scratch.
did it automatically download the downgrade ruu? Or is that one you downloaded yourself? Did you disconnect it thinking it had finished or something?
Sent from my HTC Desire HD using xda app-developers app
Click to expand...
Click to collapse
Thanks for answering..
When I've got my phone, it was stock 2.3.5, i've unlocked bootloaders, downloaded ace hack kit, rooted, instaled cwm, s-off, installed couple of custom roms. Then, i've locked my phone via fastboot oem lock. Today, I wanted to unlock it again, to instal sabsa prime, but when i reach fastboot oem get_identifier_token it points to some kind of bootloader err error command. When i started the ace kit it demanded the downgrade, but, when the downgrade is downloaded, pushed to phone, phone restart to hboot, but wont flush it. So, i wanted to downgrade on my own. I've downloaded as i said ruu, started flashing, and thats pretty much it.. It showed error, i havent disconnected it on my own.
I can only connect phone by pressing volume up and power, i have a blinking orange led indicator and it reports as qualcomm cdma technologies msm to my computer..

i thought that aahk can only be used for the stock rom.. if you already have s-off and have cwm, just flash the new rom in recovery..
Sent from my Desire HD

You couldn't have run AAHK on an unlocked bootloader. Exactly what have you done to your phone up to this point in time? What does your bootloader say now?

bananagranola said:
You couldn't have run AAHK on an unlocked bootloader. Exactly what have you done to your phone up to this point in time? What does your bootloader say now?
Click to expand...
Click to collapse
i cant enter to hboot, i cant start phone, only when i push volume up + power i have orange led blinking, and when i attach phone to pc, pc recognize it as a qualcomm cdma technologies..
from stock rom, unlocked bootloader via htcdev, used ace AAHK, instaled few custom roms, then relocked bootloader via fastboot (fastboot oem lock), then flashed ruu RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed. After that i wanted to unlock bootloader again, in fastboot got the (bootloader) [ERR] command error !!!, when runed AAHK, AAHK needed a downgrade, downgrade was downloaded, pushed to phone, but when phone restarted to hboot, downgrade coulndt be flashed, it shows PD98IMG-GB2 as a wrong image or something. Then I downloaded RUU_Ace_HTC_WWE_1.15.405.1_Radio_12.21.60.12_26.02.00.09_M_test_148662, started flash, my phone rebooted, and instead rebooting to ruu (black screen), phone just shuted down, ruu on pc showed error, that is it. I've tried to power on phone on different ways, but nothing, just once after i plugged it to pc, showd me black screen with silver letters, now won't even show that. Only with volume up + power, with orange led blinking, and somethimes, after some time attached to pc, phone connects, but how i figured out from computer managment, like a mass storage. Hope you understanded what i said.. :/
Thanks for answering bro..

yumm91 said:
i thought that aahk can only be used for the stock rom.. if you already have s-off and have cwm, just flash the new rom in recovery..
Sent from my Desire HD
Click to expand...
Click to collapse
i relocked bootloader via fastboot, flashed ruu RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed, so i've lost cwm and root..

when you shut down the phone and press voldown + power, do you get into hboot? or nothing happen?
Sent from my Desire HD

yumm91 said:
when you shut down the phone and press voldown + power, do you get into hboot? or nothing happen?
Sent from my Desire HD
Click to expand...
Click to collapse
no, nothing happens.. its fu*ked up i guess..
Edit:
I connected to usbe, pushed a few times volume down + power, after that nothing happened, i left it that way, after 10 mins maybe it powered on itself, showed white screen with green letters htc, and vibrating constantly.. I couldnt do anything, so i removed battery.. Fight continues..

mc0a said:
no, nothing happens.. its fu*ked up i guess..
Edit:
I connected to usbe, pushed a few times volume down + power, after that nothing happened, i left it that way, after 10 mins maybe it powered on itself, showed white screen with green letters htc, and vibrating constantly.. I couldnt do anything, so i removed battery.. Fight continues..
Click to expand...
Click to collapse
if its vibrating constantly it's bad... correct me if I'm wrong but I think somehow you manage to brick your device...

Did your phone ship with Gingerbread by any chance?

bananagranola said:
Did your phone ship with Gingerbread by any chance?
Click to expand...
Click to collapse
yes..

You messed your bootloader. Fix it with instructions from the PDF in post #7 in the thread in my signature.

bananagranola said:
You messed your bootloader. Fix it with instructions from the PDF in post #7 in the thread in my signature.
Click to expand...
Click to collapse
i'll give it a try.. thanks..

If you want step by step assistence go to the irc channel of the aahk team and search help there. I had a lot of issues when trying to gain root so the devs there helped me to do it. It took 2 days to fix. Good luck
Sent from my HTC Desire HD using xda premiu m

bondocel said:
If you want step by step assistence go to the irc channel of the aahk team and search help there. I had a lot of issues when trying to gain root so the devs there helped me to do it. It took 2 days to fix. Good luck
Sent from my HTC Desire HD using xda premiu m
Click to expand...
Click to collapse
No, hboot fix is no longer supported in the hack kit channel, so you won't get any,answers there. Use ths guide and ask in here if you have doubts.
Sent from my GT-N7000 using xda app-developers app

i have problems with fastboot.. <bootloader> [ERR] Command error!!! ADB too, probably because usb debbuging.. :/

mc0a said:
i have problems with fastboot.. <bootloader> [ERR] Command error!!! ADB too, probably because usb debbuging.. :/
Click to expand...
Click to collapse
Fastboot does not need usb debugging. What step are you in? What are you trying to do?

glevitan said:
Fastboot does not need usb debugging. What step are you in? What are you trying to do?
Click to expand...
Click to collapse
http://tau.shadowchild.nl/attn1/?p=188
option two, when need to reboot to ruu.. fastboot oem reboot RUU. I follow that the case are sensitive, only thing i get from fastboot is mentioned error..

mc0a said:
http://tau.shadowchild.nl/attn1/?p=188
option two, when need to reboot to ruu.. fastboot oem reboot RUU. I follow that the case are sensitive, only thing i get from fastboot is mentioned error..
Click to expand...
Click to collapse
are you in fastboot usb (you have to see that in red in the phone)??

[Q] desire stucks black screen htc with /!\ In every corner

hello
after sending it to the repair because it was not able to turn on, my htc desire now boots again but stucks on htc black screen with /!\ In every corner, when i put it on pc via usb and pull it this message appears:
repaired by ORT
BRAVO PVT1 SHIP S-OFF
HBOOT- 6.93.1002
MICROP-031d
TOUCH PANEK-SYNT0101
RADIO-5.11.05.27
so help me please what can i do to repair it myself ? i tought a S-OFF desire is easy to be repaired so i wish it's true !
thank you

Nevermind. Still learning.

/!\ in 4 corners means its pretty much ruu mode. So ul need to flash a ruu.
Try this first, Because ur s-off pull the battery out and put back in then press and hold back button then press and hold power button (so both same time) and see what comes up. Either it will boot into fastboot normaly, or boot into fastboot but with ruu in pink or it will just display the /!\ again.
Ps: jordyNL, its not radio brick, just ruu mode.

JordyNL said:
Nevermind. Still learning.
Click to expand...
Click to collapse
i tried to press return and power on buttons but it boots with the same black screen with 4 triangles !! so what should i do !! i'm scared to flash it with RUU i think it will be S-ON if i flash it with a RUU directly

the reply is for jmcclue

chegue4 said:
i tried to press return and power on buttons but it boots with the same black screen with 4 triangles !! so what should i do !! i'm scared to flash it with RUU i think it will be S-ON if i flash it with a RUU directly
Click to expand...
Click to collapse
What is your aim, I assume you still want a custom ROM?
So you can't boot into bootloader (Volume down + power) or fastboot (Back + power) at all? If you can get to either of these you can flash a new recovery through fastboot, then full wipe and install a ROM like before.
Otherwise I think you will need to flash RUU as advised, find the 2.3.3. GB RUU, don't be scared of flashing it. Yes if you do it correctly you will make it S-ON...but you can always S-OFF again, just like you got it S-OFF in the first place

i want any ROM that makes it work, and i tried both things " back + power" & "volume down+ power" but it still boots with 4 triangles, and also i don't want to make it S-ON because i don't know how to make it S-OFF again cuz it can't boot in fastboot or recovery ! that's the problem !

chegue4 said:
i want any ROM that makes it work, and i tried both things " back + power" & "volume down+ power" but it still boots with 4 triangles, and also i don't want to make it S-ON because i don't know how to make it S-OFF again cuz it can't boot in fastboot or recovery ! that's the problem !
Click to expand...
Click to collapse
Again, don't worry about that. Once you flash the RUU everything will be reset as normal, that's the whole point.
You have two options:
- Do nothing, try all button combinations and keep seeing those 4 triangles...
- Flash the RUU to get it booting. It's the first step in making anything work. I assure you that you can S-OFF once again...
Your choice

okay but how S-OFF again ? and what RUU should i choose ??

Like posted above, use the 2.3gb upgrade. Then to s-off after that use revolutionary. It will s-off ur phone in 2 mins, its really simple.

but the problem in revolutionary is that always when i run it it says "waiting for device" and never detects my device i don't know why !!! and about 2.3GB ruu can u send me the link ?? and should i look for the radio version for every RUU i try to use ?? i wish you answer all this questions plz !! i'm sorry for all that

I'm on phone right now, can't find links as easy, but I promise if you use the internet you'll find what you're looking for...applies to most things actually
As for revolutionary, likely you didn't follow a guide and didn't install the correct hboot drivers? Again find the drivers and a (video) guide by searching.

chegue4 said:
but the problem in revolutionary is that always when i run it it says "waiting for device" and never detects my device i don't know why !!! and about 2.3GB ruu can u send me the link ?? and should i look for the radio version for every RUU i try to use ?? i wish you answer all this questions plz !! i'm sorry for all that
Click to expand...
Click to collapse
if u click the troubleshooting guide by bortak in my sig then ul find 2.3gb ruu there, in resources. and like eddie said u prob dont have the drivers installed, thats why u get the "waiting for device"

i tried to boot it via the command "fastboot oem boot", it boots with white screen and green HTC logo, and vibrates 7 times and then returns to the black triangles screen ! what does it mean ??
also i want to know more about fasboot commands and how to use them, and if can i S-OFF it again with fastboot commands if the RUU doesn't work ! because revolutionary still can't find my phone and the drivers are installed correctly !

chegue4 said:
i tried to boot it via the command "fastboot oem boot", it boots with white screen and green HTC logo, and vibrates 7 times and then returns to the black triangles screen ! what does it mean ??
also i want to know more about fasboot commands and how to use them, and if can i S-OFF it again with fastboot commands if the RUU doesn't work ! because revolutionary still can't find my phone and the drivers are installed correctly !
Click to expand...
Click to collapse
Vibrates 7 times usually means hardware problem. U can only s-off if the phone is working/booting. Where did u send it for repair? Coz they obviously didnt fix it

chegue4 said:
i tried to boot it via the command "fastboot oem boot", it boots with white screen and green HTC logo, and vibrates 7 times and then returns to the black triangles screen ! what does it mean ??
also i want to know more about fasboot commands and how to use them, and if can i S-OFF it again with fastboot commands if the RUU doesn't work ! because revolutionary still can't find my phone and the drivers are installed correctly !
Click to expand...
Click to collapse
The 7 vibrations may indicate hardware failure unfortunately.
However one step at a time...Have you looked the troubleshooting guide?
Have you actually tried running the RUU yet?
You need to get the phone booting properly first. Revolutionary runs when the phone is booted into the OS I believe, not from bootloader.
Which drivers did you install? These are not the same ones when you install htc sync.
You should learn fastboot anyway, again find a guide. You can't s-off the desire with fastboot though.

i sent it to repair in my country ! algeria, it was on bad situation " doesn't boot at all nor charge, like dead phone" so he worked on it i think he does ORT jtag to boot it again, but still on 4 triangles !! so it's sure hardware problem ?? can't be fixed without changing a motherboard ?!

eddiehk6 said:
The 7 vibrations may indicate hardware failure unfortunately.
However one step at a time...Have you looked the troubleshooting guide?
Have you actually tried running the RUU yet?
You need to get the phone booting properly first. Revolutionary runs when the phone is booted into the OS I believe, not from bootloader.
Which drivers did you install? These are not the same ones when you install htc sync.
You should learn fastboot anyway, again find a guide. You can't s-off the desire with fastboot though.
Click to expand...
Click to collapse
i uninstalled htc sync, and installed drivers called " android usb drivers" ! and in my computer indicates "my htc" when i plug it on pc

chegue4 said:
i uninstalled htc sync, and installed drivers called " android usb drivers" ! and in my computer indicates "my htc" when i plug it on pc
Click to expand...
Click to collapse
...Have you tried running the RUU yet.....?
After you get it booting, then you will need to find and install the modified hboot drivers (not normal android usb drivers). Search for a specific revolutionary guide to explain it. The link is also on the revolutionary faq page

if i can boot it it means the problem is solved !! so about the RUU i tried several times before getting it S-OFF !! so it was S-ON and i tried a lot of RUU's and always problem with RADIO it can't flash it !!