Develop Bugs

Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking

Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rs314.rapidshare.com/files/102261908/RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.

Hi Folks,
Firstly many thanks for everyone's freely given time! Great Forum!
There seems to be a lot of confusion about who and what can be flashed with the German official ROM and then with Bepe's creation.
Can we try to clear some of the ambiguity for us simple folk? Might stop some of the repeated questions littering threads in both related artemis sections.
So, many thanks to anyone who can clarify the situation by providing definitive answers to the following questions!
(1) Can an 02 Orbit from, say, the UK or Holland be flashed with either the German and/or Bepe's ROM, even if it is CID Locked (i.e. same devcie and carrier, different country).
(2) Can a non-Orbit O2 device be flashed with either the German or bepe's ROM, even if it is CID Locked (i.e. different devcie but same carrier).
(3) Is there a fall back Rom available for non-German O2 Orbits should the upgrade fail?
Again, many thanks for your time.
Cheers - Adam.

Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...

Pocha said:
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Click to expand...
Click to collapse
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?

Take a look to this post http://forum.xda-developers.com/showthread.php?t=299154 I tried it, and now I have wm6 on my HTC P3300, it's true that you can't have upgrades to radio or extrom, but meanwhile I can use wm6

kaemon said:
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Click to expand...
Click to collapse
cid = country id i.e. locked to that country/language/vendor thats why cid needs unlocking before flashing diff any of aboves roms.

imei checker
is it just me or is any one on this forum a bit sceptical of a merchant who so brazenly operates their business under the assumption that all potential customers are all fraudsters/criminal scum? is there no - more customer friendly- merchant who can perform this much valued service?
my first serious post!
xan

My HTC has no vendor since I can use all SIMs from different vendors, now I upgraded from HTC Spanish version to HTC WWE version, so Vendor and Language (plus location?) locks are disabled?

meschle said:
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here http://www.imei-check.com/c3unlock.php
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.[/Q
HI I TRY TO FLASH MY HTC P3300 (BRICKED) WITH FACTORY ROMS AND NEGATIVE RESULT THE PROCESS STOP AT 2%.
CAN ANYBODY HELP ?
Click to expand...
Click to collapse

Hello,
I would like to Upgrade my O2 XDA Mini S with Windows Mobile 6 (localized / German version). I hardly searched for such a WM6 Upgrade but there seems to be no final version for my device and german language.
I figured out that there is an WM6 OS Upgrade for the XDA Orbit and XDA Trion (coming soon). Might it be possible to flash only an OS-ROM for WM6 extracted from one of these O2 ROM updates? I was able to extract the OS-Image and I already backed up my current ROM using aWizard. aWizard also supports flashing a single OS-ROM only.
Some people in this forum already said I might brick my device. Is it possible or not to flash the OS ROM? Is it risky to give it a try?
Do you know a final working German Upgrade for the XDA Mini S (Qtek 9100)?
Best Regards
Gabriel

Hello
I am in Bootloader mode right now and I started the updater but it says it can't connect. I see the device in Windows and my Artemis says it sees a USB connection (it says "USB" on the bottom of the screen in the white stripe).
What do I have to do for it to start working for a change?
I think I found the problem: First, it would be wise to close mtty . Then it is important to reboot and after entering Bootloader mode to connect USB not while booting. After trying it a dozen times it suddenly worked.
Please, could someone explain how I can unlock the CID with USPL? It starts the batch, when it's done I have a black screen with the Linux penguin and it says loaded. When the RUU tries to connect, though, the device doesn't respond. So I take it the process doesn't actually get finished...

I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days

Hi I Try To Flash My Htc P3300 (bricked) With Factory Roms And Negative Result The Process Stop At 2%.
Can Anybody Help ?

Just to inform you guys that i tried the USPL Method 3 times and always got an error message UPDATE ERROR (i think it was error number 270 ??).
Well, that was because after the DOS mode went until 100, and the dialog box for the ROM Update Utility appeared, this dialog box ask to wait for the PDA to be activesynced before presing the "UPDATE", so i was waiting for the PDA to reconnect to activesync (while in a black screen mode) before pressing update . THAT was the mistake. Don't wait for it to RE connect to activesync (strange right ?) and just press the NEXT and UPDATE without waiting anything.
THEN it worked i just upgrade to WM6 without VENDOR ID error anymore thanks to the USPL method

just got a dopod m700 for my wife i know it is a g4 ppc hence will this zip file work on it to get the cid unlocked or do i have to follow a similiar procedure as i had to for my wizard

sorry i got my answer
please ignore my earlier question

fout said:
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Click to expand...
Click to collapse
Hi there,
any pointer to this fool-proof way?
A foolish GioVAX

****ed up my artemis with this rom by upgrading stucks in loading mode WM6 screen. Can access bootloader but it always tell me upgrading again that i have the wrong rru....
CAN ANYBODY PLEASE UPLODE THE ORIGINAL WM5 ROM in GERMAN by htc for Artemis
(NOT Orbit oder MDAIII)
OR where can i get the original rom to downgrade????
Please help
thanks

Last night I flash my Dopod M700 to WM6 but after reboot it only enter to the boot flash screen showing IPL SPL 1.11 OS 3.7 etc......
I did unlock the CID but the flashing of WM6 seems not ok.
Then I enter to the bootloader mood and flash the WWE WM5.0 of HTC M700 rom. It did turn the M700 back to WM5.0 and then I flash it with WM 6.0 again.
However, I forgot to unlock CID again before flashing. Then now the device stuck in the boot screen with SPL 1.28 OS 3.7 etc......
I still can enter to bootloader mood, but I have tried to heal the device by flashing it with the WWE WM 5.0 rom of HTC M700 again. But it cannot be flashed again!!!! Error message came out that the rom is not for my device!!
Help!!!!!!!!!

Is the wm5 wwe rom the factory rom for your device or are you from another country?

diamond won't upgrade to 1.93 hspl

I have a gsm diamond (from t-mobile uk) and have flashed it to 1.34 hspl to use the new 25.16 radio and dutty's v3.1 both are working fine however I can't *upgrade* (i know it's not an upgrade per se) to hspl 1.93. it's stuck on 1.34.
using customruu it goes through the normal motions and on screen shows it to 100% then restarts etc, but after i check by going into the bootloader it hasn't updated. I have looked about and search for some time now and don't see anyone expericencing quite the same thing.
any ideas??

paulmurphy777 said:
I have a gsm diamond (from t-mobile uk) and have flashed it to 1.34 hspl to use the new 25.16 radio and dutty's v3.1 both are working fine however I can't *upgrade* (i know it's not an upgrade per se) to hspl 1.93. it's stuck on 1.34.
using customruu it goes through the normal motions and on screen shows it to 100% then restarts etc, but after i check by going into the bootloader it hasn't updated. I have looked about and search for some time now and don't see anyone expericencing quite the same thing.
any ideas??
Click to expand...
Click to collapse
...unfortunately no ideas, just the same problem described here already: http://forum.xda-developers.com/showthread.php?p=2927161#post2927161

paulmurphy777 said:
I have a gsm diamond (from t-mobile uk) and have flashed it to 1.34 hspl to use the new 25.16 radio and dutty's v3.1 both are working fine however I can't *upgrade* (i know it's not an upgrade per se) to hspl 1.93. it's stuck on 1.34.
using customruu it goes through the normal motions and on screen shows it to 100% then restarts etc, but after i check by going into the bootloader it hasn't updated. I have looked about and search for some time now and don't see anyone expericencing quite the same thing.
any ideas??
Click to expand...
Click to collapse
I have the exact same issue... I tired updating it from 1.24 to 1.93 and it restarted like it updated it. But when I go into boot loader its still got the old hardspl.
Does anyone know why??
I have tried searching around for a solution but no luck

I'm no noob and i've flashed 100's of times across many fones and unbricked a few with some careful reading but this seems very odd and stupidly simple. No idea what i'm missing.... only thing i can think to try is to flash from internal storage, but i would think this unwise with the hardspl as I thought hardspl would control access to the internal storage like some sort of bios perhaps?!

Same here
Hey guys,
Does anyone knows what is the resolution for this? I having the same problem as well.

Hi guys!
HSPL blocks write attempts to the SPL-part of the nand! You need to run SSPL from windows mobile and then flash the HSPL-Version you want. This is pretty much the only way to override that write-protection!
cheers
chris

gladiac said:
Hi guys!
HSPL blocks write attempts to the SPL-part of the nand! You need to run SSPL from windows mobile and then flash the HSPL-Version you want. This is pretty much the only way to override that write-protection!
cheers
chris
Click to expand...
Click to collapse
i have almost same problem but the only difference that my Diamond don't have hardspl on it and whenever i try to flash any hardspl phone stops at 0% and stays there for a long time....I want to change my Diamonds language...So can anyone suggest me solution.....I have already posted here on forum but no answer yet!
http://forum.xda-developers.com/showthread.php?t=749664
Another little question that how i can flash hardspl via internal storage and where its root???Root is the device path which we seen as drive in computer when we use mass storage or any other?

gladiac said:
Hi guys!
HSPL blocks write attempts to the SPL-part of the nand! You need to run SSPL from windows mobile and then flash the HSPL-Version you want. This is pretty much the only way to override that write-protection!
cheers
chris
Click to expand...
Click to collapse
Thank you. used this and it worked

Hi everybody,
got yesterday another diamond, after mine died some time ago. It has 193 spl and I cannot upgrade to olinex spl. It runs through everything, but upon reboot it still has the original 193 spl. Any ideas? I really need to flash, mine speaks Dutch and I want it in English. Please help. Kind regards. Ben

Advantage of HardSPL

Hello,
I have a HTC Touch Diamond p3700. Now I have take a look around at the forum/wiki and other external links. and found a solution to my problem. What I wanna do is change the language from my phone to english. Throught a website found on google I was able to get "HTC Touch Diamond_MRII_RUU_Diamond_HTC_Europe_2.03.401.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship"
from the HTC website (by the provided serial number). my question number 1 is is this file I got compatible with my phone?. Also by reading the wiki about SPL I found out I could do a SPL ROM update (just install the rom with the provide file from HTC website) or do a HARDSPL ROM update. Question number 2 is What is the avantage to have a HARD SPL?.
To my situation isnt it better to have a soft SPL over hard? If I just want to change the OS language! I dont need any tweaks or so. Just want it in english, like how it will be like a brand new HTC comes from US or UK.
I hope you guys can help me out with this question. Thanks in advance

If you want to change stock rom, with another language than on your phone, you have to flash HSPL olinex-unsigned, you can find it on this forum, use 1.93-olinex-unsigned.
You don't have to flash SPL, just if you upgrade your stock rom with same language like on it, which came with your phone, where you buyed, form example if you buyed phone in SWE, rom on it is SWE, and if you try to change lang-rom with WWE, it will show message, "wrong vendor id, or lang id" , than what you have to do, if you change lan OS, from originally, you have to flash with olinex-unsigned...

What I have done now is Flashed to Hard-SPL-Diamond-OliNex.
The problem now is when I try to run the SPL ROM update it will stuck at 0 procent (phone screen) and in windows it say 262 update error.
I have tried with _HTC Touch Diamond_MRII_RUU_Diamond_HTC_Europe_2.03.401.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship which I downloaded from the HTC website and also with RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship which is provided in this forum as supported ROM.
Can anyone help me out?

lhyeung said:
What I have done now is Flashed to Hard-SPL-Diamond-OliNex.
The problem now is when I try to run the SPL ROM update it will stuck at 0 procent (phone screen) and in windows it say 262 update error.
I have tried with _HTC Touch Diamond_MRII_RUU_Diamond_HTC_Europe_2.03.401.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship which I downloaded from the HTC website and also with RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship which is provided in this forum as supported ROM.
Can anyone help me out?
Click to expand...
Click to collapse
Place your device into bootloader mode(soft reset + hold vol. down until you see rainbow screen) before flashing.
Connect to pc....u should see bottom switch from serial to usb then flash device using your RUU_exe.

it say "Trigger USB Host..." Few seconds later than in red "Retry Enter USB"
More Info:
Currently
ROM Verion: 1.93.404.1 NLD
ROM Date: 07/10/08
Radioversion: 1.00.25.05
Protocolversion: 52.29.25.12H
Some Extra Info:
SPL I flashed with, comes from http://forum.xda-developers.com/showthread.php?t=400402 file Hard-SPL-Diamond-OliNex.zip (1.92 MB, 49371 views)

lhyeung said:
it say "Trigger USB Host..." Few seconds later than in red "Retry Enter USB"
More Info:
Currently
ROM Verion: 1.93.404.1 NLD
ROM Date: 07/10/08
Radioversion: 1.00.25.05
Protocolversion: 52.29.25.12H
Click to expand...
Click to collapse
It should just read USB in bootloader mode. Not familiar with above statements. Try another USB port.

when I do (soft reset + vol down + back) it comes into the tri color screen. Then it switch screen to something where it say "no image found" and switch to the screen I descript
Edit:
I have plugged the phone into another usb port now I get the tri color screen with USB on the bottom. Then I run the RUU I downloaded from the htc site. But it cannot detect my current ROM version so I ignore that and just go on. Then the phone jumps into the progress bar screen!! it has been 3 minutes now but still @ 0%

I have no idea what it was or why is that. But I have successfully update the ROM into english. What I have changed from my configuration above was searching for SPL 1.40 on the internet. After reading alot I have the idea that the version 1.30 I had downloaded is not the right one. And unfortunately I cannot find 1.40 on this forum so I had to try with google. After flashing the phone into 1.40 UNSIGNED (yes I took the risk and put the unsigned version on it).
When all that has happened I could easily run the ROM I downloaded from the HTC website and update the phone. Everything goes smoothly without problem.
So the problem lies in version 1.30 HSPL vs 1.40 HSPL.
For people just drop into this website and want to change your ROM etc. here is a good tip. The information given on this website is great, good, and correct! but just beware that the tools provided might be outdated while tutorials, FAQ's, WIKI and forum threads are all taking about the newer version of tools.

[Q] ROM Update stays at 0% - help needed

Dear All,
this time, I have a problem and need your help, please.
I just bought a new (used, but not by me ) HTC Touch Diamond. Hard-SPL (1.37 from whoever) was installed.
First MTTY'ed the device - with success (set 14 0, task 29, task 8)
Wanted to install OliNex 1.40 first
Started ROM-Update, everything went fine, screen of Diamond changed into "bar display" - but stays there with 0%
Tried several flashes (OliNex, ROM, Radio - everything the same)
Does anybody have a hint for me what to do? Identifier seems ok, DIAM100 is shown in intial bootloader screen (three color-screen)
I appreciate any hint.
With kind regards from Switzerland - Christoph

Radio
Downgrade your radio to one below 1.02.XXX before flashing the unlocked radio
Full instructions to unlock your diamond are here
http://forum.xda-developers.com/showthread.php?t=749201
Once you have done this, you can flash any ROM you like

Dear Dave,
thank you very much for your support.
Unfortunately it didn't help but showed everytime the same picture - stuck in the bar at 0% and doesn't do anything.
I tried STEP 1, STEP 2 and downgrading to radio 1.00.25.05 (but actually I don't know which is actually installed, as the Diamond never reaches the Touch Diamond page with ROM & HW Info, it stucks in the Touch Diamond page with no information at all, if started not in Bootloader mode)
It seems to me that the bootloader itself could be corrupted or the model number (shows DIAM100 in Bootloader) is somewhat corrupted, as I know that the internal storage consists of more digits (like DIAM10000 or so) - and a way to fix it with MTTY? But I can't find a description of the MTTY tasks of the Diamond.
Any more Idea?
Thank you Dave, and all the others who read and think, in advance.

X
Can you get into Bootloader mode by holding down
Volume down button + Back button (Bottom right button) + Press reset with the pen
Then keep pressed the first two buttons and let go of reset, keep hold of the first two buttons until it reaches the bootloader mode
If you can do this, then reboot and put the radio onto the storage card (4GB one) and enter bootloader mode, then folllow instructions on that screen to flash the radio, and you can do the same for the rom
It sounds to me like maybe you have not managed to flash the HardSPL properly

Hi Dave!
Thanks for your quick reaction.
Yes, I can anter bootloader mode. But nothing more. Flash is not possible. Hard-SPL was the first thing I tried to flash but it also remained at 0%
How can I put files on the internal storage card from within bootloader mode? (Phone is not booting, ONLY bootloader mode is accessible...) I never encountered this before...
But I can reach the phone with MTTY.. can I access the storage card through this?

X
Have your tried different HardSPL versions ?
Im not sure what is wrong... if you are in Bootloader mode, and the USB drivers are installed and you have activesync running on the PC it should update no problem
I would make sure all the above is true, and attempt different HardSPLs
I think that is the issue as you wont be able to flash an unlocked radio or custom rom without HardSPL being flashed first
Here is another version you could try
http://selfmod.net/how-to-hard-spl-a-htc-diamond/
EDIT - And I dont know if there is a way to access the storage card from MTTY or bootloader, my guess is that you wont be able to
Also, this is a GSM Diamond right ? Not a CDMA ? (UK Networks are GSM)
CDMA flash is here
http://forum.ppcgeeks.com/cdma-diam...ond_c-cdma-sspl-hardspl-package-here-now.html

Hi Dave!
Yes, it's GSM. Thanks for your help and the links provided - it didn't help.
I tried various Hard-SPLs: OliNex 1.20, 1.30, 1.37, 1.40 and 1.93 (developers)
Result - all the same: standstill at 0%
I've seen in MTTY that I have an "upload" menu item - but need there the start address and command line for Diamond plus to know what it is meant for, I will try to find out... and if there is some new know-how out of this, I will post it here, in order that future GENERATIONS may find it *laugh*
Dave? THANKS!
Kindest regards from Switzerland - Christoph

X
Ok, lol Another possible !
Maybe your friend flashed a Signed HardSPL which means you can only flash Signed radios and roms until you flash another unsigned HardSPL
If the Radio you are trying to downgrade to is unsigned that could explain the issue... try and find a Signed radio below version 1.02.XXX and try to flash that, then try to flash to another Unsigned HardSPL, if the radio flash goes ok.
------------
Update stops at 0%
Short answer: You're running the normal HardSPL and you're trying to flash an unsigned (not signed by olinex) ROM. You need the developer version which fixes the 0% issue. Link is at the bottom of this post. Read on to understand the difference between Standard/Developer Edition!
Long answer: First you need to understand that there are two definitions of "signed". HTC and the mobile operators sign ROMs so that the RUU flash utility allows them to be flashed. Usually this is what the word "signed" in the filename means.
Then there is another definition of signed: The developers of HardSPL introduced their own signing process. They want to ensure that people flashing cooked ROMs can rely on a certain quality standard. The normal version of HardSPL will only allow ROMs signed by OliNex to be flashed. If the ROM you are about to flash is signed, it will say so in the thread you got it from. If it isn't signed, you will need the developer version of HardSPL. That one will allow any ROM to be flashed. Get it at the bottom of this posting.
A note on this: The signing process by olinex makes sure that the ROM you're about to flash won't brick your device. It doesn't mean all other ROMs are necessarily evil.
-----------
Some help on 0% flash hangs
http://forum.xda-developers.com/showthread.php?t=409425
I`ll have a look into uploading from MTTY as I have never tried that.. sounds a good feature if you can though for dead phones and such !
good luck.. again lol

magicdave26 said:
Ok, lol Another possible !
Maybe your friend flashed a Signed HardSPL which means you can only flash Signed radios and roms until you flash another unsigned HardSPL
If the Radio you are trying to downgrade to is unsigned that could explain the issue... try and find a Signed radio below version 1.02.XXX and try to flash that, then try to flash to another Unsigned HardSPL, if the radio flash goes ok.
------------
Update stops at 0%
Short answer: You're running the normal HardSPL and you're trying to flash an unsigned (not signed by olinex) ROM. You need the developer version which fixes the 0% issue. Link is at the bottom of this post. Read on to understand the difference between Standard/Developer Edition!
Long answer: First you need to understand that there are two definitions of "signed". HTC and the mobile operators sign ROMs so that the RUU flash utility allows them to be flashed. Usually this is what the word "signed" in the filename means.
Then there is another definition of signed: The developers of HardSPL introduced their own signing process. They want to ensure that people flashing cooked ROMs can rely on a certain quality standard. The normal version of HardSPL will only allow ROMs signed by OliNex to be flashed. If the ROM you are about to flash is signed, it will say so in the thread you got it from. If it isn't signed, you will need the developer version of HardSPL. That one will allow any ROM to be flashed. Get it at the bottom of this posting.
A note on this: The signing process by olinex makes sure that the ROM you're about to flash won't brick your device. It doesn't mean all other ROMs are necessarily evil.
-----------
Some help on 0% flash hangs
http://forum.xda-developers.com/showthread.php?t=409425
I`ll have a look into uploading from MTTY as I have never tried that.. sounds a good feature if you can though for dead phones and such !
good luck.. again lol
Click to expand...
Click to collapse
This is the answer. I used to have the same problem because when I bought my diamond I thought everything runs the same as the TyTN but ...
So to cut this story short, almost 90% of the 0% bar situations are because U R not using signed roms. However if Ya want to then use the unsigned HardSPL.

Hi Dave & Nazgul,
it seems that my case belonst to the non-90%
Of course I tried all this, but I have THREE diamonds - two were branded by the Swiss Swisscom (this is, in fact, the same image as the German Vodafone branding), one was the original HTC version
I'm flashing Diamonds since two years though.
My fault this time was, that I THOUGHT, this new one were HardSPL'ed, but it wasn't - and formatted the device using MTTY without Hard-SPL.
After that I had the above mentioned situation.
NO Hard-SPL was flashable - as written above - also noth the unsigned developer 1.93 edition - it always remained at 0%
I managed in the meantime to flash the original Vodafone/Swisscom ROM. So I have back the device in the official configuration (HTC Swisscom 1.97 package http://www.swisscom-mobile.ch/scm/d...pa=0x0x147x18x0x0x0x0x0&odg=SoftwareAndManual)
But - this uses Radio 1.08.xxx and I would like to downgrade because I think, Dave's hint above to use a radio before 1.02.xxx would be worth a try.
BUT - I STILL can't flash anything. Neither ANY Hard-SPL nor any Radio version nor any ROM.
The bar remains at 0%
I tried to find the original (first edition) of the Swisscom ROM Package, which used the Radio 1.00.25.05 - and then to try Dave's proposed steps.. but I can't find it anymore - all you can find is the "latest" package...
So I would still appreciate any help to be able to flash. Ok, now at least, I have a usable phone... but... I wanted to use it (as the other two) for ROM development testing, so who wants to have a PHONE!?!?
Kind regards from Switzerland - Christoph

Here is your radios
Sorry for the short post, I have a really bad hangover lol
http://forum.xda-developers.com/showthread.php?t=407956

Morn' Dave!
I tried them all - none of them was flashable... same 0%-bar.
I thought of having the V 1.00 complete official Swisscom-Pack and as part of it, the radio 1.00.25.05, which is included. Seems to me, that the c(complete) official ROM pack is flashable.
THEN I could re-try to flash Hard-SPL (with then installed radio below 1.02.xxx)
Hangover? What's this?

Christoph21x said:
Morn' Dave!
I tried them all - none of them was flashable... same 0%-bar.
I thought of having the V 1.00 complete official Swisscom-Pack and as part of it, the radio 1.00.25.05, which is included. Seems to me, that the c(complete) official ROM pack is flashable.
THEN I could re-try to flash Hard-SPL (with then installed radio below 1.02.xxx)
Hangover? What's this?
Click to expand...
Click to collapse
YEa that might work, it is almost certain the issue is the HARDSpl being either not flashed, or flashed with a signed version
Good luck !!
And the hangover is nearly gone... I cured yesterdays with more alcohol lol

Have you tried these UNSIGNED dev HARDspls ?
http://forum.xda-developers.com/showthread.php?t=400950

Hi Dave - GOT IT, solved
The "secret" was to flash noit from withi boot loader but from within Win Mobile with ActiveSync/Windows Device Center connected.
Then say "Yes" when "enterbootloader.exe" was asked to be installed/invoked.
Then the Device rebooted, flashed Hrd-SPL 1.40 correctly - and everything else onwards went fine.
Thanks a lot for your assitance, Dave and others.
Kind regards from Switzerland - Christoph

Ah.. I thought you were already using the Activesync and CustomRUU to flash it with !
Yes, the ROMs and Radios can be flashed from the storage card, but the Hard SPL needs to be done from Activesync / CUstomRUU
Pleased you got it working anyway

URGENT Help needed.

Hi, sorry if this is in the wrong section.
I have a touch pro 2 GSM (Rhod100) that i'm trying to hard spl unlock.
whenever i try to unlock (gsm or cdma, ive tried both) it just says
Warning, this package is not intended for your phone, exiting now.
I'm pulling my hair out over this, i've searched this whole forum and cannot find anyone else with this problem!
Thanks in advance

Heres what booting into that tri colour mode says.
Security Unlocked
RHOD*** 32M SS-BC
SPL-0,87.0000
MicroP(LED) 0x0A
MicroP(Key) 0x04
TURBO HW/TURBO SW
TP MFG DATA
.. then some numbers then saying calibrated.
Please help

Security unlocked ? So it's a second hand RHOD already unlocked.

its probably a refurb yes but its not hard spl unlocked so i cant put cfw on it. and yes my sd card was removed, i did notice you removed edited your post

You have checked your radio rom ? Tried to reflash a stock rom and HardSPL after ? Your phone might have met Olipro sim unlocker, flashed with a stock rom, but not SPL relocked after. Many scenarios are possible.

majorasshole said:
You have checked your radio rom ? Tried to reflash a stock rom and HardSPL after ? Your phone might have met Olipro sim unlocker, flashed with a stock rom, but not SPL relocked after. Many scenarios are possible.
Click to expand...
Click to collapse
ive done all of the above already to no avail.

harrylucas123 said:
ive done all of the above already to no avail.
Click to expand...
Click to collapse
-BUMP-
Anyone? Jeez...

And you tried to apply HARDSpl from your SD card ? Or data cable ?

from data cable through activesync (winxp) didnt think through sd card was possible

It was on legacy devices, but unfortunaltely seems not possible with RHOD Just checked. I think at this stage, you could try to switch your usb cable and usb port. If it ain't work, a post in the HardSPL Section might call the attention of Olipro.

its now getting error 246

You should pay attention @ this post : http://forum.xda-developers.com/showpost.php?p=4930529&postcount=979
The cab needed is this one http://hpcmonex.net/roms/enablerapinew.cab

already got that cab. AND IM NOT DONATING FOR SOMETHING THAT ISN'T WORKING, I'LL DO THAT AFTER.

Fixed now. Tip for people who got their hong kong tp2's. Donate and hard reset! Thats the key!