Develop Bugs

Help me... upgraded but now stuck at operator splash

Hi, I seem to have bricked my Universal. Apologies, I did search the forum & wiki etc., I wouldn't say I'm an expert but I've upgraded/downgraded ROM & radio many times before
First I tried to flash with the rDosti, otherwise known as Tomal's - v7.7: WM6.1 Pro
The flashing process went OK, but then after I hard reset the operator splash screen comes up - the T-Mobile screen - and the version is listed as 2. THING xx, like it should. However, my device remains frozen at this screen.
I hadn't upgraded to Bootloader 1.01, it was 1.00 like the documentation in the thread said, so I did this and reflashed again, same thing.
Then I tried flashing with the T-Mobile official WM5 in desperation - the same thing happens, the text on the splash says it's WM5 but it freezes here.
Then I reflashed the bootloader and WM6 several times again with the same results.
Can anybody help me with this pretty please? Thanks for any help!

try original1.....search in de forum.....

diji1 said:
Hi, I seem to have bricked my Universal. Apologies, I did search the forum & wiki etc., I wouldn't say I'm an expert but I've upgraded/downgraded ROM & radio many times before
First I tried to flash with the rDosti, otherwise known as Tomal's - v7.7: WM6.1 Pro
The flashing process went OK, but then after I hard reset the operator splash screen comes up - the T-Mobile screen - and the version is listed as 2. THING xx, like it should. However, my device remains frozen at this screen.
I hadn't upgraded to Bootloader 1.01, it was 1.00 like the documentation in the thread said, so I did this and reflashed again, same thing.
Then I tried flashing with the T-Mobile official WM5 in desperation - the same thing happens, the text on the splash says it's WM5 but it freezes here.
Then I reflashed the bootloader and WM6 several times again with the same results.
Can anybody help me with this pretty please? Thanks for any help!
Click to expand...
Click to collapse
2days ago i got this problem .but now i recover my divice with '' mtty for remove all botloder imege . then updat with new rom.
first u have to know is ur divice G3/G4. then u flash with rom file

Hi, thnx for replies, but im afraid you misunderstood me somewhat.
The *upgrade* process appears to work, ie. Bootloader seems to work fine, the device freezes at the first *operator* screen*, where it shows OS & radio version - the t-mobile screen, NOT the bootloader.
I tried the "Exit_bootloader" app (=mtty?) with no success.
An

do 1thin u update another rom...make sure dat ur fone is g3/g4..then update. coz if u update the wrong rom dis wl happen...

Thanx. I own 3 universal & I upgraded another with the same ROM & it worked no probs. So problem is not with the ROM.
The device with the freeze is G3.

mamaich method
Step by Step :
get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset)
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .
For task 28 55aa in mtty success , will show the message (attachment )
DONE .

Thanks satanisme.
I had the same problem, I have had a good look around but yours is the best description of how to get out of the splash screen.
regards
Gingerchristopher the biodesel king.

Thanks satanisme.
I had the same problem, I have had a good look around but yours is the best description of how to get out of the splash screen.
regards
Gingerchristopher the biodeisel king.

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all

dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.

henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!

i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?

just Change your ROM..,

hard reset is somthing i dont want to do. Is there any other option?

kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.

same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error

Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.

henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution

Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

cool, will try that one. thnx

On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me

dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

HTC Diamond bricked?

i have flashed my diamond with the official htc rom
im on 1.40 olinex, now i can only access boot mode.
sometimes if i leave the phone without a battery for like 2 hours, when i turn it on i see the "touch diamond" logo, if i leave the battery for a whole day i see the windows mobile loading screen, but then suddenly the phone turns off
plz if you have any idea about this problem help me

If you can acces bootloader, then your diamond isn't bricked.
Try the unsigned version of olinex' hard-SPL and flash the ROM again.
Good luck!

hey ElCondor, im on 1.40 olinex, i cant flash it because it is protected
how can i flash the unsigned 1.40 olinex one?

Here is a link to the unsigned hard-spl.
Make sure you download "Unsigned-Hard-SPL-Diamond-OliNex.zip".
Follow the instructions:
1) Download, extract to an empty folder.
2) Run RomUpdateUtility.exe, Have Phone Synced with PC (go into bootloader, connect your cable, then the word "serial" in bootloader will change into "USB".
3) follow steps, check device for prompts after PC shows loading bar. it should go to black screen now.
4) SPL flashes, device automatically reboots, job done.
5) to confirm you got it installed, go into bootloader mode (volume down + reset, i.e. press volume down button and reset then keep holding the volume down key until you see tricolour screen) and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Installing this will hard-reset your device.
Best Regards,
ElCondor

when i flashed the unsigned 1.40 olinex, the device rebooted
windows mobile is preparing your phone for first use
htc logo
phone went off :S
will try flashing rom again

flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?

mzaouar said:
flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?
Click to expand...
Click to collapse
Hi
If you can access the bootloader then your device is not bricked. Therefore download a rom of your choice then connect to the usb when on the bootloader then use a Diamond custom RUU (normally come with the rom) follow the steps. After rom updated make a hard reset. I hope it will run ok.
Looks your symtons are showing like your rom corrupted.
Good luck

i am flashing this ROM
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
the newest one i downloaded from htc. com is giving me rom update error
would you recommend a good rom for my phone?

after flashing and reflashing and hard resetting with the ROM showed above
still cant boot in ROM mode, only in boot mode
el condor sabes, anything ???
should i flash with a new rom, and if yes with which?
(diam100 olinex 1.40 unsigned)

Perhaps try a custom rom?
I found when flashing to an official rom from a different provider (my phones telstra and was flashing 3) I had issues with the rom booting and had to follow a post on here somewhere to get it working, however When I had this problem I could still flash any custom rom with no issues.
Unless its for warrenty purposes then its probably not worth flashing the "original" perhaps flash A.Z.T.O.R. = Alpha Zero Tweaked Official Roms which are close to the original but with benifits of being modded for faster speed etc.
Anyways Im no pro but I know what you are going through and I am trying to find the link to the fix to your problem as I also had the problem. But recommend trying a custom rom to confirm the problem is the same as mine.
For the record now I do not use official roms anymore, with WM6.5 running well for the most part on the diamond its a great step backwards when you revisited 6.1

flashed to SwiftBL-WWE-Diamond-v7.5-Full-16MbPP
still same problem can only go to boot mode
i am feeling there is no solution to my problem ?
is the phone bricked? :S

If you haven't done yet, flash the hard-spl I posted. Just do it, re-instal the hard-spl! Then, flash another ROM, maybe (as said before) your rom is corrupted.
The problem here is, that you first installed the unsigned hard-spl, and then flashed a corrupt rom. In that way, the hard-spl can be damaged too, so flash the hard-spl again and flash another rom should work.
Good luck!

I did :S but to no avail, I will do it again fingers crossed :S !
update: weird, everytime after i flash the hardspl unsigned, it boots up, i can see the "touch diamond" logo
windows mobile booted.. preparing your device..
update 2: windows mobile booted, installing everything
omgomg it looks it might work this time, fingers still crossed !!
el condor !! haha fingers crossed
update 3 :S : windows mobile installed properly, phone rebooted, went again and opened it, then i heard a sound from the speaker and the phone turned off :S
it must work what could the problem be now? last step !

Okay try a hard-reset, maybe that works.
If not, then flash hard-spl again, then hard-reset, then flash another ROM. Then hard reset. Then try again if it boots.
Is your battery enough charged? That could also be a reason.

did not work, wont even boot up
when i said if i leave battery out and such, I thought it might be hardware/heat related
http://www.htcwiki.com/thread/2069847/HTC+Diamond+-+Severe+Crashing+Problem,+maybe+heat+related
could this be it? will i have to send my phone for repairs?
because maybe when WinMo was loaded, the phone started to heat up and it shut down
so basically my solution is not a software fix??

If none of the tips worked, and you have the same problems as described in the site you linked, then you probably have to send it back.
One thing you could do: Try if the other hard-spls (1.37 and 1.93 unsigned) are working for you.
I'm sorry for you, maybe someone more skilled than me (like cmonex or olipro) knows how to solve your problem.

it's alright :S i thank you for all the help you have offered !
( it is customizing right now) but i expect it to reboot anytime now

worked, 5 minutes into winmo it restarts

mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....

mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
OK good to hear that, if you have any more questions in future, just ask!
Glad to be of some help
msvb007 said:
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....
Click to expand...
Click to collapse
Ive sent you a pm, there's no need to use this thread for your questions because the problem in this thread is solved.
So take a look at your pm!

[Q] Problem with my TP2 please help!!!!!

Oke I flashed my TP2 , and the flashing had one problems that was the first time I run the flashing rom(energie) it stop on the tri-color screen, and the flashing stopt there so I ran the same flashing rom again wile the TP2 showed the tri-color and it continued the flashing process so I thought every thing is a oké.
Then the phone did it first boot on the new rom and it stopt at the rom loading screen so right a way I knew somthing is not a oké. I tried flashing with sd, hard reset, mutty, 1 minute battery out the phone. I will give these option another go if you tell me how to do it with this phone.:
So kan somebody help me with this problem.
TP2 Info :
I bought the phone in The Nederlands
I don't know the rest of the specs
SORRY

St3v3-) said:
Oke I flashed my TP2 , and the flashing had one problems that was the first time I run the flashing rom(energie) it stop on the tri-color screen, and the flashing stopt there so I ran the same flashing rom again wile the TP2 showed the tri-color and it continued the flashing process so I thought every thing is a oké.
Then the phone did it first boot on the new rom and it stopt at the rom loading screen so right a way I knew somthing is not a oké. I tried flashing with sd, hard reset, mutty, 1 minute battery out the phone. I will give these option another go if you tell me how to do it with this phone.:
So kan somebody help me with this problem.
TP2 Info :
I bought the phone in The Nederlands
I don't know the rest of the specs
SORRY
Click to expand...
Click to collapse
Go into bootloader, plugin your usb, run task 29. Then when you are finisht, go back into bootloader, plug in your usb. Then flash the rom again true your pc.
btw did you install hardspl? you didn't mention it.

Lennyz1988 said:
Go into bootloader, plugin your usb, run task 29. Then when you are finisht, go back into bootloader, plug in your usb. Then flash the rom again true your pc.
btw did you install hardspl? you didn't mention it.
Click to expand...
Click to collapse
How do i get in bootloader, is that the screen that comes after tri-color screen.
btw and yes I did use install hardspl.

St3v3-) said:
How do i get in bootloader, is that the screen that comes after tri-color screen.
btw and yes I did use install hardspl.
Click to expand...
Click to collapse
The Tri Color screen is the bootloader. When connected to the computer it should say "USB" at the bottom. Otherwise it says "Serial".
EDIT: What version is your SPL? The unlocked version is 85.

stevedebi said:
The Tri Color screen is the bootloader. When connected to the computer it should say "USB" at the bottom. Otherwise it says "Serial".
EDIT: What version is your SPL? The unlocked version is 85.
Click to expand...
Click to collapse
I used the Rhodium-HardSPL_V2_00R3.exe. I am using Radio 2.08.50.05 + task29.zip. I am using the task 29 after is pushed the power, Call, Hang Up, but i keep getting the 260 error. What I am doing wrong.

St3v3-) said:
I used the Rhodium-HardSPL_V2_00R3.exe. I am using Radio 2.08.50.05 + task29.zip. I am using the task 29 after is pushed the power, Call, Hang Up, but i keep getting the 260 error. What I am doing wrong.
Click to expand...
Click to collapse
When you go into bootloader screen, what version of SPL is displayed? It should end in 85.

stevedebi said:
When you go into bootloader screen, what version of SPL is displayed? It should end in 85.
Click to expand...
Click to collapse
I cant see the tri-color screen long enough too read what it shows.
RHOD 100 32M SS-BC
SPL - 0.85.011 MAX
MicroP(LED) 0X0A
MicroP(KEY) 0X04

Read this page for your questions.
http://forum.xda-developers.com/showthread.php?t=550540
Then go into the bootloader. Plugin your usb and flash using your pc. Just run the customruu.exe.
Or you can try flashing from your sd card. your choise

Thanks for helping guys, I have fix the phone. I did not now that I could enter bootloader with VolDown + power button, thanks to that I could fix the phone by flashing the phone with a rom.

HTC Touch Diamond : Cannot Start !! Help Please

hello this is my first post in this forum and I hope you accept me as friends on this section of HTC Touch Diamond
.. I have a HTC Touch Diamond P3700 ( new) and since yesterday he cannot be Started on .. and I tried several solutions (reset ....) but no result
Could you provide me a solution Please
My Greetings
Aziz

Nice use of font colors. Unfortunately the same cant be said for your phone. Whats your location and from which (country) did you buy your touch diamond from

Just be patient and listen ayyu3m to explain you and he will help you 100%.I have more worst problem than u have

sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards​

newlead said:
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards​
Click to expand...
Click to collapse
Okay. So what exactly did you do or what exactly happened to your phone?

man did ya try to charge it? maybe the bettray is dead and can ya load the boot screen u know just press the down volume button and reset see if u can see the three colors screen if its then dont worry ... worst thing is just re-flash the rom PM me for extra help buddy

I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.

lexxa v said:
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
Click to expand...
Click to collapse
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country

ayyu3m said:
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
Click to expand...
Click to collapse
I live in Roumania and bought the phone from someone and i don't know where did he get it from... but when i tried the official htc suport they said that my phone was made for Czech Republic and that's why my ROM update doesn't work...
The answer to second question is that i don't know

Can someone help me please? I don't know what to do now...

Btw the person from whom you bought the device is a resident of Romania?

Yes, he is.

okay can you go into bootloader mode and tell me everything on the screen

DIAM100 MFG 64G
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
USB

thankx. thats all i need for now. let me try to come up with a rom for you...

btw did you have any carrier logo before you ran into this problem...i mean like instead of the orange logo did you have any vodafone logo or just the htc logo during start up
AND do you have a front facing camera for video calls?

I had only the htc logo at start-up and i do have a video camera front facing.

Okay i found your stock ROM.
Do exactly as i say....
go to this link and scroll down to bottom...
http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2
when you go to the bottom of the page, you will be requested to enter ur SERIAL NUMBER which you just found under your battery.
Enter and press submit.
now select the file Windows_Mobile_6.1_East_Europe and start downloading...
let me know if the download has started also

I started the download ...

Okay good. So once the download complete you are ready to flash...
This is how to flash...
1. Put ur device in bootloader mode again.
2. Connect the device to ur PC
3. RUN the downloaded file....and press NEXT NEXT NEXT....
Reply back if the flashing process is goind smooth or even if you face any problem...
Then i can finally go and sleep