Develop Bugs

Flashing Radio Rom

Hi all, newbie here
i tried flashing a radio rom using the RUU.exe provided via activesync.
when it is detecting my phone radio ver ,it shows my rom ver instead. so i did not continue.
so it is normal? i can jus continue flashing or should flash from phone in the bootloader menu which i rename as "DIAMING.nbh"?

yes that is ok
just keep going....it will change the radio only

charlie0904 said:
Hi all, newbie here
i tried flashing a radio rom using the RUU.exe provided via activesync.
when it is detecting my phone radio ver ,it shows my rom ver instead. so i did not continue.
so it is normal? i can jus continue flashing or should flash from phone in the bootloader menu which i rename as "DIAMING.nbh"?
Click to expand...
Click to collapse
as below... u can continue... or use the internal storage > diaming.nbh method...
for radios i'd continue in activesync... that way if something does go wrong u can flash again in windows to another radio... *thats if you havent used the radio file before and its unknown if it'll work or not...

woh sweet~ thanks for the help..

[SOLVED] Semi Bricked HTC Desire - Need help

Hello guys, I have a major problem on my HTC Desire. Most of it is my fault but please try to help out here and not judge me... :/
I use Miuimod. I had the 1.8.1 version and I went to install 2.1. The thing is that (for the first time!!!) I didn't check the last page of thread to find out that Miuimod 2.1 for Desire a major bug that forces an endless reboot.
And that's not all... Don't ask me why but.. I didn't make a NANDroid backup... :/ I was in a hurry and I didn't check the button from ROM Manager menu.
Also for a reason, I cannot boot into ClockworkMod Recovery. I only have hboot. Hboot lets you install a ROM only with the name update.zip. But even though I have renamed the last OpenDesire ROM as update.zip, it won't install it cause it doesn't have the proper signature.
So I'm kinda stuck with a semi bricked HTC Desire. Any suggestions?
(And just for the record, yeah, lesson learned... )

Are you s-off? If so, just flash a new recovery image through fastboot.
Sent from my HTC Desire using Tapatalk

Wrong forum, Q/A should be right...
Try flashing clockwork over fastboot:
"fastboot flash recovery recovery-clockwork-2.5.0.7-bravo.img"
Put your SD in your computer and copy a ROM.zip on it, than flash as usual ?

Why why why??
What have you learnt from this mistake? Yes, ALWAYS install a custom recovery. Saves you this kind of trouble.
Okay I'm of no help, but I just wanted to tell.

@markuz85 No I'm s-on. In order to change to s-off I need to boot into device (right?).
@westernmg I'm trying to but adb shows no devices and I'm kinda stuck there.
Any suggestions?
Thank you in advance...

Try to pull out the battery and wait a few seconds then power on the phone again and press power+vol- and select recovery.If this don't work try to reflash an official htc desire rom renamed in update.zip from hboot.

Thanks for the answer. Can't find an official rom though. Can you point me at one?
@9600pro87 I did what you said but still nothing...

Try this: http://shipped-roms.com/shipped/Bra...3.00.32U_5.09.00.20_release_140022_signed.exe

Sorry, this is the correct link.
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_159811_signed.exe
Run this program update from windows with the phone connected to the pc.

Am I missing something? These files are .exe. How am I suppose to use them?Shouldn't be .zip so I can install them via hboot?

aventinus said:
Am I missing something? These files are .exe. How am I suppose to use them?Shouldn't be .zip so I can install them via hboot?
Click to expand...
Click to collapse
Run the program from windows with the phone connected via usb cable.

Oh ok, but as I said, I can only boot to the hboot recovery. So at what point should I run the .exe?

aventinus said:
Oh ok, but as I said, I can only boot to the hboot recovery. So at what point should I run the .exe?
Click to expand...
Click to collapse
Hboot is ok, at least with phone off too if i remember right. The updater reboot the phone automatically.

It doesn't work. I get error [170] "Cannot connect to phone.." etc. Is it that I have changed the Radio?
I'm posting you the information on fastboot in case we can figure something out:
BRAVO PVT1 SHIP S-ON
HBOOT-0.80.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO 5.10.05.23
Mar 29 2010, 21:34:33
Any other suggestion?

Fortunately I solved the problem. This is what I did:
I basicaly rerooted my phone using Modaco's method. So when finished I had the default ROM again. Thank you all for your help!

Good that you solved the issue. But just so you know, that method of rooting is outdated. Rooting does not need downgrading, as of current hboots
Sent from the Time portal

aventinus said:
Fortunately I solved the problem. This is what I did:
I basicaly rerooted my phone using Modaco's method. So when finished I had the default ROM again. Thank you all for your help!
Click to expand...
Click to collapse
Good for you, now your desire is "live" again.

How do you upgrade radio?

I'm currently stuck on radio 3.35.20.10 and using custom ROMs such as CM I can't send things over bluetooth, so I am considering flashing a newer radio. Can anyone point me in the right direction please? I understand of the bricking risks, but in my opinion it needs to be done.
Heres my HBOOT information:
- BUZZ PVT SHIP S-OFF
- HBOOT-6.01.1002
- MI CROP-0622
- TOUCH PANEL-SY3KY_01
- RADIO-3.35.20.10
- Nov 17 2010,12:08:53
It is a European phone.

The process is the same as installing a Custom ROM Zip. The only pre-requisite is that you have to use CWM 2.x as Radio zips are not Edify scripted.
Alternately, you can use Fastboot to flash the radio as well using the command fastboot flash radio <file-name>.img. The required radio files can be found here:
http://forum.xda-developers.com/showthread.php?t=1029318 (Post 1, Point 4)
As long as you don't interrupt the process of flashing the radio, you should be fine.

3xeno said:
The process is the same as installing a Custom ROM Zip. The only pre-requisite is that you have to use CWM 2.x as Radio zips are not Edify scripted.
Alternately, you can use Fastboot to flash the radio as well using the command fastboot flash radio <file-name>.img. The required radio files can be found here:
http://forum.xda-developers.com/showthread.php?t=1029318 (Post 1, Point 4)
As long as you don't interrupt the process of flashing the radio, you should be fine.
Click to expand...
Click to collapse
Thanks, how do I know which is the newest radio?

The one you are having at the moment is the newest (ending with 20.10). However, for BT/GPS issues in CM or other AOSP ROMs, it is required that you reflash the radio, even if it is the same version as the one you already have.

3xeno said:
The one you are having at the moment is the newest (ending with 20.10). However, for BT/GPS issues in CM or other AOSP ROMs, it is required that you reflash the radio, even if it is the same version as the one you already have.
Click to expand...
Click to collapse
Thank you very much, I shall go do that now.
But just out of curiosity, will I have to reflash the radio every time I flash a CyanogenMod version?

No, it works fine between versions. (But, if you perform a data wipe before installing a new version, then, you may have to reflash the radio)

Wi-fi problem with CM7-7.1.0.1-buzz
Hi ,I am having problem with Wi-fi.When I connect to a network it works fine for few minutes but after that stops working .While on phone N/w strength is shown :Excellent.
Same case with Market and Browser.
Forgot the network in wireless settings and scaned again.Still the same problem.
Is there any way to get around it ? Is there anything to do with CM7 settings or reflashing the radio is the only option ?
Sorry,i am a newbie here.First time rooted my device like 2 days ago so out of any idea.
According to “3xeno” : http://forum.xda-developers.com/show....php?t=1355101
Do I need to reflash my radio ? RADIO-3.35.20.10 is the latest radio so there is no option of upgrading it . Any ideas ? Thanks.
Android version : 2.3.7
CM7 -7.1.0.1-buzz
Baseband version : 13.55.55.24H_3.35.20.10
Kernel version :2.6.35.14-nFinity([email protected]#1)
Build number : GWK74
HBOOT information:
Revolutionary
- BUZZ PVT SHIP S-OFF
- HBOOT-6.01.1002
- MI CROP-0622
- TOUCH PANEL-SYN3KY_01
- RADIO-3.35.20.10
wifi sleep policy is already set to “never” sleep. still have the problem.

Reflash radio...cm has this problem mine was solved by reflashing it...
Sent from my HTC Wildfire using XDA App

Ankurcul said:
Reflash radio...cm has this problem mine was solved by reflashing it...
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Okey thanks, which radio should i reflash ? RADIO-3.35.20.10 ?
I am using CM7 -7.1.0.1-buzz.
Android version : 2.3.7
CM7 -7.1.0.1-buzz
Baseband version : 13.55.55.24H_3.35.20.10
Kernel version :2.6.35.14-nFinity([email protected]#1)
Build number : GWK74
HBOOT information:
Revolutionary
- BUZZ PVT SHIP S-OFF
- HBOOT-6.01.1002
- MI CROP-0622
- TOUCH PANEL-SYN3KY_01
- RADIO-3.35.20.10

Downloaded radio zip ” buzz.radio-3.35.20.10-signed”
Put on SD card
Started ROM Manager
Clicked Reboot into Recovery
Flashed from there
I got this Error :
Amend scripting (update script) is no longer supported.Amend scripting was deprecated by Google in Android 1.5.It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting(updater-script and update-binary)to create working update zip packages.
Installation aborted.
According to “3xeno” : http://forum.xda-developers.com/show...php?p=20227957
Do I need to use CWM 2.x ? If yes, how ? In ROM manager under “More Recoveries” >>Flash Alternate Recovery >>it says “No alternate recovery available”
When I click on “All CWM Recoveries”,it says “No legacy recoveries found”.
How to get CWM 2.x ? Any ideas ?
Android version : 2.3.7
CM7 -7.1.0.1-buzz
Baseband version : 13.55.55.24H_3.35.20.10
Kernel version :2.6.35.14-nFinity([email protected]#1)
Build number : GWK74
HBOOT information:
Revolutionary
- BUZZ PVT SHIP S-OFF
- HBOOT-6.01.1002
- MI CROP-0622
- TOUCH PANEL-SYN3KY_01
- RADIO-3.35.20.10

Okey ,Thanks,successfully reflashed the RADIO.
Gonna check if it's working now.

Okey ,Thanks,successfully reflashed the RADIO.
Gonna check if it's working now.

reflashing of RADIO didn't help
reflashed the RADIO "radio-3.35.20.10-signed" but still facing the same problem.
When I connect to a network it works fine for few minutes but after that stops working.
Any ideas ?
---------- Post added at 01:07 PM ---------- Previous post was at 01:05 PM ----------
Ankurcul said:
Reflash radio...cm has this problem mine was solved by reflashing it...
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
reflashed the RADIO "radio-3.35.20.10-signed" but still facing the same problem.
When I connect to a network it works fine for few minutes but after that stops working.
Any ideas ?

Acelerometer doesn't work in Android 4.2.2

Good morning everybody, I'm new in this forum, nice to meet you
I write because three months ago I tried rooting the phone and the screen went white. Thus I had to take it to fix. The experts installed Android 4.2.2 (June) on my HTC DesireHD.
It turns out that since they installed the cooked rom, the accelerometer doesn't work and none of the phone sensors . That is, before rooting, when I turned the phone to see a photo in landscape , the mobile spinning perfectly. And also playing the games the sensors worked perfectly . Now, after installing Android 4.2.2, the sensors does not work anymore. It must be a software problem.
Do you know what happens or how to fix it if there is a known solution? Maybe there are missing drivers on my Android 4.2.2 phone?
The information about my phone is, ( in settings -> Phone Info) :
- Android version: 4.2.2
- Kernel version : [email protected] #8
- CyanogenMod Version : JellyTime_R11
Thank you very much!
Best,

Did you try to install new radio? You can try install new version of JellyTIme R11.

sayler said:
Did you try to install new radio? You can try install new version of JellyTIme R11.
Click to expand...
Click to collapse
New radio? What do you mean? Please, specify a little bit more. :good:
How can I install JellyTIme R11?
Thank you so much

First you must download JellyTime R11 from here: http://forum.xda-developers.com/showthread.php?t=1778202 and GAPPS for 4.2 builds (20130301). When you downloaded R11 put it on your sd card and then turn off your phone. Hold volume button down and turn on phone. Chose recovery with your volume button you navigate and with power button you confirm your choice. In recovery you must wipe data/factory, wipe Cache, wipe Dalvik Cache. When you done chose install from sd card and select to install R11 when its done install GAPPS. After that you rebot your phone and you wait 3-5 for first time to boot. I hope that you can understand. Sorry for my english. Good luck mate!

Wait, did you unlock your bootloader or S-Off it? If you unlocked it you can't flash radios. And it doesn't sound like a radio problem anyway. What ROM did you flash? You could also just flash a working ROM. How to do that depends on whether you unlocked your bootloader.

bananagranola said:
Wait, did you unlock your bootloader or S-Off it? If you unlocked it you can't flash radios. And it doesn't sound like a radio problem anyway. What ROM did you flash? You could also just flash a working ROM. How to do that depends on whether you unlocked your bootloader.
Click to expand...
Click to collapse
sayler : I tried what sayler says but the accelerometer doesn't work.
bananagranola: The information when I switch on the pone (- volume and on button) is the following:
*****UNLOCKED ******
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.09.04.11_M2
eMMC-boot
Dec 22 2011
I'm trying to flash this room: cm-JellyTime_42_R11, and after this: gapps-jb-20130301-signed
Could you help me?
It doesn't work
Thank you so much

7toni7 said:
sayler : I tried what sayler says but the accelerometer doesn't work.
bananagranola: The information when I switch on the pone (- volume and on button) is the following:
*****UNLOCKED ******
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.09.04.11_M2
eMMC-boot
Dec 22 2011
I'm trying to flash this room: cm-JellyTime_42_R11, and after this: gapps-jb-20130301-signed
Could you help me?
It doesn't work
Thank you so much
Click to expand...
Click to collapse
Your device have s-on, so u cannot flash radio.. Try to flash stable rom first like arhd or rooted stock rom from development thread. If the accelerometer still does not work, it is probably hardware issues..
Sent from my Desire HD using xda premium

there were similar issues like this reported. Flash stock rooted ROM (available somewhere in the forum)
Set it up, and after setup, flash the ROM of your choice.
It was documented with 4.2.2 releases that this is the fix for accelerometers
> Sent from Guy's tablet
> Galaxy Note 10.1 Stock (GT N8010)

yumm91 said:
Your device have s-on, so u cannot flash radio.. Try to flash stable rom first like arhd or rooted stock rom from development thread. If the accelerometer still does not work, it is probably hardware issues..
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
He can still flash it, even though he has an S-ON.. All he need is to use the fastboot method via ADB command, flash the boot.img first, then he can flash the jellytimeR11
Sorry, I can't collaborate, my english is not good.. Just search for it

yukimoto16 said:
He can still flash it, even though he has an S-ON.. All he need is to use the fastboot method via ADB command, flash the boot.img first, then he can flash the jellytimeR11
Sorry, I can't collaborate, my english is not good.. Just search for it
Click to expand...
Click to collapse
Thank you all. I have done the method by using: fastboot flash boot boot.img, and after this flashing the jellytimeR11. But the accelerometer still does not work....However, if I use the original RRU (stock), it do works
I don't know what to do!!
please, help

yukimoto16 said:
He can still flash it, even though he has an S-ON.. All he need is to use the fastboot method via ADB command, flash the boot.img first, then he can flash the jellytimeR11
Sorry, I can't collaborate, my english is not good.. Just search for it
Click to expand...
Click to collapse
I didn't say he can't. He needs to use the tired stock ROM first
-Sent from Guy's phone via Tapatalk
>Sammy Note 10.1: stock, no root
>Sammy S3 stock, no root

7toni7 said:
Good morning everybody, I'm new in this forum, nice to meet you
I write because three months ago I tried rooting the phone and the screen went white. Thus I had to take it to fix. The experts installed Android 4.2.2 (June) on my HTC DesireHD.
It turns out that since they installed the cooked rom, the accelerometer doesn't work and none of the phone sensors . That is, before rooting, when I turned the phone to see a photo in landscape , the mobile spinning perfectly. And also playing the games the sensors worked perfectly . Now, after installing Android 4.2.2, the sensors does not work anymore. It must be a software problem.
Do you know what happens or how to fix it if there is a known solution? Maybe there are missing drivers on my Android 4.2.2 phone?
The information about my phone is, ( in settings -> Phone Info) :
- Android version: 4.2.2
- Kernel version : [email protected] #8
- CyanogenMod Version : JellyTime_R11
Thank you very much!
Best,
Click to expand...
Click to collapse
Here is your fix http://forum.xda-developers.com/showthread.php?t=1970972

GuyInTheCorner said:
I didn't say he can't. He needs to use the tired stock ROM first
-Sent from Guy's phone via Tapatalk
>Sammy Note 10.1: stock, no root
>Sammy S3 stock, no root
Click to expand...
Click to collapse
Oh, sorry about that.. I did't understand.. My mistake.

[Q] HTC One X GSM/3G/Network problem

My HTC One X doesn't get any signal for any network. WiFi and Bluetooth works fine. I think it is a hardware fault. Please let me know if anyone had the same problem and fixed it or figured the problem.
If anyone got a broken HTC one X who'd like to give/ sell me the phone or the parts I need I would really appreciate!

hasith.rc said:
My HTC One X doesn't get any signal for any network. WiFi and Bluetooth works fine. I think it is a hardware fault. Please let me know if anyone had the same problem and fixed it or figured the problem.
If anyone got a broken HTC one X who'd like to give/ sell me the phone or the parts I need I would really appreciate!
Click to expand...
Click to collapse
Custom rom or stock rom. If you are on custom rom are you flashed the boot.img. If you are on stock Rom are you see your IMEI or it is missing?

boot.img
Thant said:
Custom rom or stock rom. If you are on custom rom are you flashed the boot.img. If you are on stock Rom are you see your IMEI or it is missing?
Click to expand...
Click to collapse
I flashed it with cyanogen Mod to see if that would work somehow. But No signal. Then I downloaded an original rom from the internet and flashed it. Now there is no Signal at all.
I don't think I have flashed the boot.img. Can you please tell me where to find the correct boot.img and how to flash it. The phone has clockwork mod installed.
When I got the phone the signal was barely receiving, Now no signal at all.
Thank you!

hasith.rc said:
I flashed it with cyanogen Mod to see if that would work somehow. But No signal. Then I downloaded an original rom from the internet and flashed it. Now there is no Signal at all.
I don't think I have flashed the boot.img. Can you please tell me where to find the correct boot.img and how to flash it. The phone has clockwork mod installed.
When I got the phone the signal was barely receiving, Now no signal at all.
Thank you!
Click to expand...
Click to collapse
The correct boot.img is in your rom archive just open the archive tale the boot.img and paste it in your fastboot folder then go in fastboot with your phone and from cmd run the command fastboot flash boot boot.img But you must to know exactly wich release on the rom installed because every release is with different boot.img and every time when you flash rom you must to flash the boot.img from rom archive

boot.img
Thant said:
The correct boot.img is in your rom archive just open the archive tale the boot.img and paste it in your fastboot folder then go in fastboot with your phone and from cmd run the command fastboot flash boot boot.img But you must to know exactly wich release on the rom installed because every release is with different boot.img and every time when you flash rom you must to flash the boot.img from rom archive
Click to expand...
Click to collapse
Thanks, But I have little knowledge in this.
This is what comes up in the boot menu,
*** UNLOCKED ***
ENDEAVORU XE SHIP S-OFF RL
CID-11111111
HBOOT-1.36.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC bootmode: disabled
CPU-bootmode: disabled
HW Swcure boot : disabled
MODEM PATH : OFF
I don't have the archive file anymore. Can you tell me how to find the correct boot.img file?

hasith.rc said:
Thanks, But I have little knowledge in this.
This is what comes up in the boot menu,
*** UNLOCKED ***
ENDEAVORU XE SHIP S-OFF RL
CID-11111111
HBOOT-1.36.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC bootmode: disabled
CPU-bootmode: disabled
HW Swcure boot : disabled
MODEM PATH : OFF
I don't have the archive file anymore. Can you tell me how to find the correct boot.img file?
Click to expand...
Click to collapse
Try download this RUU and flash it if not help download this one star it and fallow the instruction on the screen

Still No Signal After RUU
Hi,
I downloaded a boot.img with some lollipop custom rom package. And flashed it. Stucked it in a bootloop.
So I downloaded the RUU using the link you gave me and installed the rom. But I don't get the signals yet. Do I have do anything more. Like flashing a boot.img
I live in Sri Lanka. Small island near india. The RUU used says europe in the file name. Does that has an effect over this?.
WiFi works fine.
Please help.
Thank you

hasith.rc said:
Hi,
I downloaded a boot.img with some lollipop custom rom package. And flashed it. Stucked it in a bootloop.
So I downloaded the RUU using the link you gave me and installed the rom. But I don't get the signals yet. Do I have do anything more. Like flashing a boot.img
I live in Sri Lanka. Small island near india. The RUU used says europe in the file name. Does that has an effect over this?.
WiFi works fine.
Please help.
Thank you
Click to expand...
Click to collapse
I give you two RUU what happend with the second one
Are the RUU installed without any errors try check via wi-fi for update

Thant said:
I give you two RUU what happend with the second one
Are the RUU installed without any errors try check via wi-fi for update
Click to expand...
Click to collapse
I only downloaded the first one. It installed successfully without any errors. There were no updates via wifi. I doubt if this is a hardware failure.
Is there a method only to change the radio version without installing the whole rom every time?
Should I try installing the second Rom? I hesitated because I thought it was a regional matter (Europe , Asia)
Thank you for the support on this. :good:

hasith.rc said:
I only downloaded the first one. It installed successfully without any errors. There were no updates via wifi. I doubt if this is a hardware failure.
Is there a method only to change the radio version without installing the whole rom every time?
Should I try installing the second Rom? I hesitated because I thought it was a regional matter (Europe , Asia)
Thank you for the support on this. :good:
Click to expand...
Click to collapse
Are you see your IMEI in fastboot and radio basband in settings and IMEI

Thant said:
Are you see your IMEI in fastboot and radio basband in settings and IMEI
Click to expand...
Click to collapse
No I don't see IMEI in the fastboot and radio version in system properties.
I can see the radio version in fastboot

hasith.rc said:
No I don't see IMEI in the fastboot and radio version in system properties.
I can see the radio version in fastboot
Click to expand...
Click to collapse
If you don't see your IMEI in fastboot then nothing can help you this maybe is a hardware problem

Even I have the same problem. My SIM when inserted onto other mobiles, the Mobile Data works and other sim is inserted into my mobile, this works. Dont know where the problem is...