HI ALL EXPERT,
I was so disappointed for my upgrade sch-i559 firmware with sch-i5570. All complete pass. But when finished my phone was completely dead. Noting response Usb not detect when I connect with my computer only black screen. No power ...Nothing Nothing. Please help me how can I solve my problem. I try with unbricked but not success. Please help me.
mrzm2006 said:
HI ALL EXPERT,
I was so disappointed for my upgrade sch-i559 firmware with sch-i5570. All complete pass. But when finished my phone was completely dead. Noting response Usb not detect when I connect with my computer only black screen. No power ...Nothing Nothing. Please help me how can I solve my problem. I try with unbricked but not success. Please help me.
Click to expand...
Click to collapse
You flashed firmware from a didn't model phone and want help? In my opinion frame out on your wall to reminds yourself not to be foolish.
In all likelihood, only way to repair is at service centre.
Sent from my GT-S5830 using XDA App
Related
Hi all;
i think my SE Xperia Play has crasehd (since some months)
sent it to the nearest phone shop; they said they cannot repair.
It doesnt power on; the red light keeps blinking;
My PC or any MAC doesnt detect the phone when plugged in.
A friend of mine asked me to flash it through a linux-operating computer.
What should i do..
Thhanks.
Vinessen
omg, I got the same problem too. can't turn on completely. just the red led blinking. can't flash any roms because pc doesn't detect my Xperia PLAY :c
Xperia play not being detected by pc
Yeah, in fact when connecting it yesterday the pc displayed 'unknown device' connected but
afterwards says that the device has malfunctioned..
i tried reinstalling the drivers to no avail..
vsen1407 said:
Yeah, in fact when connecting it yesterday the pc displayed 'unknown device' connected but
afterwards says that the device has malfunctioned..
i tried reinstalling the drivers to no avail..
Click to expand...
Click to collapse
what drivers did you install?
try flash fw using flashtool..
ezadsyafiq99 said:
try flash fw using flashtool..
Click to expand...
Click to collapse
how can I flash fw using flashtool if the computer doesn't recognize my phone...
i think nobody can really help us here (just like on the official Sony support forum)
i tried lots of things but still nobody could help me out with this prob.
Think gonna throw that ****ing phone to the trash!
vsen1407 said:
i think nobody can really help us here (just like on the official Sony support forum)
i tried lots of things but still nobody could help me out with this prob.
Think gonna throw that ****ing phone to the trash!
Click to expand...
Click to collapse
yeah me too... :c and buy a new phone. huhu...
Dead boot??
After some research on the net, i foud something called dead boot;
Apparently medusa or setool2 can solve the problem;
CAn anyone help to use this software?
There's something called Testpoint used to recover the r800i??
Please help
Thanks
vsen1407 said:
After some research on the net, i foud something called dead boot;
Apparently medusa or setool2 can solve the problem;
CAn anyone help to use this software?
There's something called Testpoint used to recover the r800i??
Please help
Thanks
Click to expand...
Click to collapse
hey, my phone was fixed. yes it used that testpoint thing. try contact Alejandrissimo (here's his gmail, [email protected])
he is the one who help me about the dead boot problem.
aslo, go http://forum.xda-developers.com/showthread.php?t=1252019
Dead Bootloader
Hi there; I sent her a mail, not replied yet; but would surely answer..
So you mob got fixed?? Glad for you; it gives me hope..
can you explain me how the process goes on?
Thanks;
Vsen1407
I also heard that the guys who unlock bootloaders can also fix that problem using that method, but I guess you fuys figured it out already so im to late to help. Good luck.
Sent from my R800i using xda premium
Try plugging usb into pc and hold the power and the search key for a couple secs?
Sent from my R800i using xda app-developers app
have a look at this post guys: http://forum.xda-developers.com/showthread.php?t=1252038
might just work for you too.
if a phone shop cannot repair, there's always sony repair, i had no option but to do the same
tampering with you're phone can void warranty and is always not suggested
Got some similar probs with my old k610....tohh it to repair and after 8 weeks with guarantee problems,not gettin informed....i got the answer the problem is not fixable.took it back home,plug power on, pressed the power button and this got damn thing worked fine like nothinh ever happened...
Sent from my R800i using xda premium
ihsanfauzi said:
omg, I got the same problem too. can't turn on completely. just the red led blinking. can't flash any roms because pc doesn't detect my Xperia PLAY :c
Click to expand...
Click to collapse
Have you found any solution....pls let me know.....im also facing this problem
Hi guys
I do not know what made the kid from a cell phone, but I have a problem does not turn on, nor download mode or recovery only black obrazovka.V Odin I get, but I end up at connection setup, usb jig also nothing one click unbrick nothing too please thanks for your help everyone , sorry for my English:crying::crying::crying:
putpuda said:
Hi guys
I do not know what made the kid from a cell phone, but I have a problem does not turn on, nor download mode or recovery only black obrazovka.V Odin I get, but I end up at connection setup, usb jig also nothing one click unbrick nothing too please thanks for your help everyone , sorry for my English:crying::crying::crying:
Click to expand...
Click to collapse
U hardbricked it. U'll have to take it to service centre and tell them a lie tht u upgraded with kies and this happen. dont mention about root,custom rom nothing which makes ur warranty invaild
Does anyone have a better solution?
NA
seizitp said:
I was using odin 1.85 to root my phone and by mistake i picked up the pit file only and pressed enter and the process started. Now my phone is not starting at all. Only blank screen. Whenever I connect it to my computer i get a beep from computer meaning the phone is connected but doesn't show anything on screen of the phone. Doesn't even charge. In Device manager it shows Zeus connected. Please help me with the problem. How do i get my phne back to normal????
Need help really urgent as I don't have any spare phone to use. :crying: :crying:
Click to expand...
Click to collapse
Sorry, its hard bricked. Warranty exchange or mobiletechvideo can help you out with a j-tag
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-jtag-brick-repair/
Hi there! First of all I don't speak english very well.
My Galaxy Nexus hard bricked yesterday.
tl;dr no boot animation, no recovery mode, no download mode, no response from computer.
I thought it had just a low battery level, I found it turned off. So I tried to recharge it but it gave no signals, no battery icon, nothing.
After an all night long recharge I tried to turn it on, to enter in download mode or in recovery mode but nothing works. I also tried to connect it with my computer with and without battery, no response, no "OMAP" device found, no sound from Windows for plugging it in, nothing.
I found this thread here in xda, many people has been redirected to it and found their solution to the brick problem.
I tried to follow all the steps but when I plug in the phone and start the .bat file nothing happens, just stuck on "Waiting for device".
The phone is unlocked and rooted. I'm running AOKP JB-MR1 Build 2 and Franco Kernel for a month, never had problems with them, never installed other ROMs after that.
What should I do now? Should I try to do something or just bring it to a support center? The phone is still in warranty, there would be any problem because it has a non-stock ROM?
I've red about a jig to force the Odin mode, should I buy it? (I found this one)
Thanks for the help.
Have you tried booting into Odin mode
ntb81 said:
Have you tried booting into Odin mode
Click to expand...
Click to collapse
Yes, it doesn't work.
have you your warranty on it?
return it and get a new one
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Beauenheim said:
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
Click to expand...
Click to collapse
Yeah, that's why I'm not sure to send it in for warranty. So have I to try with a JTAG first?
[bman123] said:
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Click to expand...
Click to collapse
I'm not understanding that too, I don't know what happened. Suddendly it stopped working. Maybe is just a battery problem, I'll try to use another one before bringing it to the shop where I bought it.
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
---------- Post added at 06:12 AM ---------- Previous post was at 06:02 AM ----------
galiganu said:
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
Click to expand...
Click to collapse
so right after I wrote that I plugged my phone into USB of my PC without battery. when I inserted the battery it started showing me the battery sign and I could started the phone. 3 minutes later it went black again, but the trick didnt work again.
any ideas? thanks
Try This !!
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Tech.Nik said:
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Click to expand...
Click to collapse
Please could you explain a bit more how to go about this? I have a Verizon Galaxy Nexus in a somewhat similar condition. This one is recognised as an OMAP 4430 device. I downloaded OMAP Flasher, installed drivers and tried to bring it back to life but after running the batch file I get this error: Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE). Can the resistor trick work on this and if yes, how can I go about it? I am not faint-hearted; I think I can handle it if given the right instructions.
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
galiganu said:
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
Click to expand...
Click to collapse
Yeah, the faulty USB port is a very common issue.
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
completely dead means stuck at boot or no sign of any powering on?
first thing I would try is a JIG, force it into download mode and see if u can flash the original firmware
for firmware download, I recommend sammobile.com. They also have guides showing how to do so If you are uncertain or new to this
If u dont own a JIG and not willing to wait for one to be shipped, u can build it your own. it is pretty simple, just couple of resistors and a micro usb port
oh, and dont be shy about what you have done. Provide the essential details always for better assistance
wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
Will your computer recognize it? If you connect it to your computer with the USB cable I mean. If it only makes 3 beeping noises (the computer) and doesn't recognize it, and the phone doesn't turn on at all you will need either a JIG service or a JTAG service (most likely JTAG)
Thank you 4 ur help
I will make my own Jig but can you please help with a guide 4 how to use the Jig to force flash new rom?