Related
HI ALL EXPERT,
I was so disappointed for my upgrade sch-i559 firmware with sch-i5570. All complete pass. But when finished my phone was completely dead. Noting response Usb not detect when I connect with my computer only black screen. No power ...Nothing Nothing. Please help me how can I solve my problem. I try with unbricked but not success. Please help me.
mrzm2006 said:
HI ALL EXPERT,
I was so disappointed for my upgrade sch-i559 firmware with sch-i5570. All complete pass. But when finished my phone was completely dead. Noting response Usb not detect when I connect with my computer only black screen. No power ...Nothing Nothing. Please help me how can I solve my problem. I try with unbricked but not success. Please help me.
Click to expand...
Click to collapse
You flashed firmware from a didn't model phone and want help? In my opinion frame out on your wall to reminds yourself not to be foolish.
In all likelihood, only way to repair is at service centre.
Sent from my GT-S5830 using XDA App
Hi there! First of all I don't speak english very well.
My Galaxy Nexus hard bricked yesterday.
tl;dr no boot animation, no recovery mode, no download mode, no response from computer.
I thought it had just a low battery level, I found it turned off. So I tried to recharge it but it gave no signals, no battery icon, nothing.
After an all night long recharge I tried to turn it on, to enter in download mode or in recovery mode but nothing works. I also tried to connect it with my computer with and without battery, no response, no "OMAP" device found, no sound from Windows for plugging it in, nothing.
I found this thread here in xda, many people has been redirected to it and found their solution to the brick problem.
I tried to follow all the steps but when I plug in the phone and start the .bat file nothing happens, just stuck on "Waiting for device".
The phone is unlocked and rooted. I'm running AOKP JB-MR1 Build 2 and Franco Kernel for a month, never had problems with them, never installed other ROMs after that.
What should I do now? Should I try to do something or just bring it to a support center? The phone is still in warranty, there would be any problem because it has a non-stock ROM?
I've red about a jig to force the Odin mode, should I buy it? (I found this one)
Thanks for the help.
Have you tried booting into Odin mode
ntb81 said:
Have you tried booting into Odin mode
Click to expand...
Click to collapse
Yes, it doesn't work.
have you your warranty on it?
return it and get a new one
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Beauenheim said:
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
Click to expand...
Click to collapse
Yeah, that's why I'm not sure to send it in for warranty. So have I to try with a JTAG first?
[bman123] said:
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Click to expand...
Click to collapse
I'm not understanding that too, I don't know what happened. Suddendly it stopped working. Maybe is just a battery problem, I'll try to use another one before bringing it to the shop where I bought it.
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
---------- Post added at 06:12 AM ---------- Previous post was at 06:02 AM ----------
galiganu said:
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
Click to expand...
Click to collapse
so right after I wrote that I plugged my phone into USB of my PC without battery. when I inserted the battery it started showing me the battery sign and I could started the phone. 3 minutes later it went black again, but the trick didnt work again.
any ideas? thanks
Try This !!
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Tech.Nik said:
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Click to expand...
Click to collapse
Please could you explain a bit more how to go about this? I have a Verizon Galaxy Nexus in a somewhat similar condition. This one is recognised as an OMAP 4430 device. I downloaded OMAP Flasher, installed drivers and tried to bring it back to life but after running the batch file I get this error: Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE). Can the resistor trick work on this and if yes, how can I go about it? I am not faint-hearted; I think I can handle it if given the right instructions.
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
galiganu said:
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
Click to expand...
Click to collapse
Yeah, the faulty USB port is a very common issue.
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
completely dead means stuck at boot or no sign of any powering on?
first thing I would try is a JIG, force it into download mode and see if u can flash the original firmware
for firmware download, I recommend sammobile.com. They also have guides showing how to do so If you are uncertain or new to this
If u dont own a JIG and not willing to wait for one to be shipped, u can build it your own. it is pretty simple, just couple of resistors and a micro usb port
oh, and dont be shy about what you have done. Provide the essential details always for better assistance
wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
Will your computer recognize it? If you connect it to your computer with the USB cable I mean. If it only makes 3 beeping noises (the computer) and doesn't recognize it, and the phone doesn't turn on at all you will need either a JIG service or a JTAG service (most likely JTAG)
Thank you 4 ur help
I will make my own Jig but can you please help with a guide 4 how to use the Jig to force flash new rom?
So I decided to upgrade my brother s3 phone to 4.3 using odin
And now it won't turn on at all!
I can't access to download mode or recovery.
I guess I hard bricked the s3??
Please help =(
Plug into the computer and check device manager. If it says QHSUSB_DLOAD you're hard bricked.
If so, check the debrick thread for help.
DocHoliday77 said:
Plug into the computer and check device manager. If it says QHSUSB_DLOAD you're hard bricked.
If so, check the debrick thread for help.
Click to expand...
Click to collapse
Its show what you said on the device manager, I guess I hard bricked it =(
Hi all
I got a notification of the latest software upgrade available for my device. I downloaded it and installed it. The installation process was shown to have reached 100% and then the phone screen went black and then did not turn back up. When I connect the phone to charger, I do not see any battery charging icon
I had my phone connected to the power outlet while I was upgrading? Is my phone bricked? Any way I can resolve this issue? My phone is out of warranty.
I have never ever rooted the phone. Not sure why would this happen with an official software upgrade.
Any help will be immensely appreciated
Are u able to enter recovery mode!
nick2408 said:
Hi all
I got a notification of the latest software upgrade available for my device. I downloaded it and installed it. The installation process was shown to have reached 100% and then the phone screen went black and then did not turn back up. When I connect the phone to charger, I do not see any battery charging icon
I had my phone connected to the power outlet while I was upgrading? Is my phone bricked? Any way I can resolve this issue? My phone is out of warranty.
I have never ever rooted the phone. Not sure why would this happen with an official software upgrade.
Any help will be immensely appreciated
Click to expand...
Click to collapse
Bro, hava read here....hopefully this will fix for u, FULL UNBRICKING TUT
http://forum.xda-developers.com/showthread.php?t=2725706
bodmar said:
Bro, hava read here....hopefully this will fix for u, FULL UNBRICKING TUT
http://forum.xda-developers.com/showthread.php?t=2725706
Click to expand...
Click to collapse
I was unable to go to recovery or download mode..
I took my phone to samsung service center and they told my motherboard has problems and it needs to be replaced.. huh
nick2408 said:
I was unable to go to recovery or download mode..
I took my phone to samsung service center and they told my motherboard has problems and it needs to be replaced.. huh
Click to expand...
Click to collapse
So its under warranty? Right? Or do u have to pay for the mess samsung created
doctor_droid said:
So its under warranty? Right? Or do u have to pay for the mess samsung created
Click to expand...
Click to collapse
I had to pay for it. It was out of warranty
nick2408 said:
I had to pay for it. It was out of warranty
Click to expand...
Click to collapse
Thats a really bad consumer behavior from an intl oem...
doctor_droid said:
Thats a really bad consumer behavior from an intl oem...
Click to expand...
Click to collapse
Why do you think so. I am quite sure my phone was hard bricked
nick2408 said:
Why do you think so. I am quite sure my phone was hard bricked
Click to expand...
Click to collapse
I meant behavior towards consumer... not ur fault mate...i knw how pathetic it can be to give away hard earned money when its nt our fault
Ridiculous move from Samsung IMO.
nick2408 said:
Hi all
I got a notification of the latest software upgrade available for my device. I downloaded it and installed it. The installation process was shown to have reached 100% and then the phone screen went black and then did not turn back up. When I connect the phone to charger, I do not see any battery charging icon
I had my phone connected to the power outlet while I was upgrading? Is my phone bricked? Any way I can resolve this issue? My phone is out of warranty.
I have never ever rooted the phone. Not sure why would this happen with an official software upgrade.
Any help will be immensely appreciated
Click to expand...
Click to collapse
Dear friend, Did you repair your phone my case is similar to yours.
agsao said:
Dear friend, Did you repair your phone my case is similar to yours.
Click to expand...
Click to collapse
Dear friend, just download your latest firmware at sammobile and flash it thru odin. Its the easiest and safest way to upgrade in my experience.
kaiserlourdes said:
Dear friend, just download your latest firmware at sammobile and flash it thru odin. Its the easiest and safest way to upgrade in my experience.
Click to expand...
Click to collapse
I could not open my phone and PC recognized it as unknown device.
agsao said:
I could not open my phone and PC recognized it as unknown device.
Click to expand...
Click to collapse
Search the forum on how to root and u can find there the Samsung USB drivers link. Download that
kaiserlourdes said:
Search the forum on how to root and u can find there the Samsung USB drivers link. Download that
Click to expand...
Click to collapse
Previously the PC was able to detect the phone (that mean the driver is installed successfully) but after this problem I can't turn on my phone ,and the screen is always blank.
agsao said:
Previously the PC was able to detect the phone (that mean the driver is installed successfully) but after this problem I can't turn on my phone ,and the screen is always blank.
Click to expand...
Click to collapse
can u explain how did you end up with blank screen when plug into PC?
did u go to download mode?
because mine was perfectly fine when plug into the PC.
kaiserlourdes said:
can u explain how did you end up with blank screen when plug into PC?
did u go to download mode?
because mine was perfectly fine when plug into the PC.
Click to expand...
Click to collapse
Dear friend,
My phone was stuck on logo screen.
I tried to full flash it using Odin I chooses all files except PDA files.
The phone accepted the flashing successfully
Phone restated and showing the android robot for updating
During this screen became black.
The result:
No response from phone it cann' be charged nor be turned on
I can't open the phone in any mode even download mode
When I plug my phone to the PC it's recognized as unknown device not as previous.
Thanks
agsao said:
Dear friend,
My phone was stuck on logo screen.
I tried to full flash it using Odin I chooses all files except PDA files.
The phone accepted the flashing successfully
Phone restated and showing the android robot for updating
During this screen became black.
The result:
No response from phone it cann' be charged nor be turned on
I can't open the phone in any mode even download mode
When I plug my phone to the PC it's recognized as unknown device not as previous.
Thanks
Click to expand...
Click to collapse
After successful flash the phone will reboot automatically and will stay on bootloop, while rebooting press and hols home+vol.up+power button. Then factory reset, wipe dalvik, wipe cache. Then reboot system..
Why not PDA? When i flashed stock rom i choose PDA and choose the file.
Auto reboot and f.reset time are the only checked boxes
kaiserlourdes said:
After successful flash the phone will reboot automatically and will stay on bootloop, while rebooting press and hols home+vol.up+power button. Then factory reset, wipe dalvik, wipe cache. Then reboot system..
Why not PDA? When i flashed stock rom i choose PDA and choose the file.
Auto reboot and f.reset time are the only checked boxes
Click to expand...
Click to collapse
Now I cannot flash it any more because the phone can't start in any mode neither download download mode nor recovery mode. ( may be hard bricked)
agsao said:
Now I cannot flash it any more because the phone can't start in any mode neither download download mode nor recovery mode. ( may be hard bricked)
Click to expand...
Click to collapse
one cannot hard bricked thru OTA update of official samsung. because i once update thru OTA and it updated successfully.
maybe it hard bricked when you flashed thru odin, maybe a wrong step.
i cant help you anymore brother, you can search this forum on how to unbricked device, u can try it. goodluck!