Develop Bugs

Need help with CDMA Work shop to get msl

Msl reader isnt working for me gives me a error. I put it on modem for both. have dev mode disabled. I run cdma workshop connect to port 2 hit read spc an get a error "Phone ask for SPC. SPC (6 digits) is required. Check "security" tab - "SPC" section."
I really need my MSL to fix my mms and Update my prl because i get a error everytime i try to.
Idk if this is info thats needed but i am rooted 2.2 rom
Am i supposed to enter a SPC before hand... lol or am i just missing something.
Edit: I also have the samsung drivers installed and am using the same cable i rooted with last night. The error i get with MSL reader is "ERROR: /dev/smd0 does not exist. This phone is not compatible."

I'm guessing you already tried this
gokuman56 said:
EDIT: Easier Way to get MSL. Okay so you have to download connectbot from the Market
1. Open ConnectBot
2. Agree Next Next Yada Yada
3. Press SSH and select Local
4. type in whatever you want by local and press enter
5. ok once you see a black screen and to the left a cash sign, type in "getprop" without the quotes
6. You should see a lot of words, scroll up all the way at the top.
7. Near the middle of the screen until you see [ril.MSL]
8. It will be 6 digits and that's your MSL
Click to expand...
Click to collapse
Are you trying to push a new PRL to the phone?
look here

Goto security, then send the default samsung password at the bottom left corner..
Then top right of the the tab click read spc.. the spc is the msl
Sent from my SPH-D700 using XDA App

Send the defualt password? just leave it on the toshiba or select a specific one? also just tried the connectbot way it gave me [ril.msl]: [000000] which IDK if thats right :\

lgevo said:
Send the defualt password? just leave it on the toshiba or select a specific one? also just tried the connectbot way it gave me [ril.msl]: [000000] which IDK if thats right :\
Click to expand...
Click to collapse
Doubtful but not impossible
Try this then see if it works
excerpt from 4g signal mod
1. Dial ##3282#
2. It will open a menu, click WiMAX and enter MSL. Note: 4G radio must be on.
3. Go to extensions and Hold EntryRX and Write Extension
4. Change the Value from -89 to -110 (The Lower the weaker the signal can be for the phone to connect.)
5. Change EntryCINR to 0004
just get to step 2 and see of it accepts your MSL

Lol wow it did thanks guys!

[Q] Help! Have HTC Evo and Even MSL Reader Won't Read Correct MSL

Have new to me Sprint HTC Evo rooted and I cannot activate on Sprint because I cannot get correct MSL. Sprint Tech gave me number it thought was correct but no luck. I downloaded a msl reader, EScode from PCWorld and it gave the same number Sprint had for the msl.
So, can anyone give me some help on how to obtain the msl?
Thanks for the help.

download msl reader from the market, and it'll give you the 6 digit code. You can remove the battery from the phone, and read off the meid number, and make sure the information matches the actual phone you have.

I'm not sure I understand. I have downloaded a msl reader and it did not work. Are you advising I download an another/different msl reader?

Naw, its the same one. The app asks for super user permissions, then gives you a 6 digit code? Also, your bootloader shows s-off?

WhoreDog said:
Have new to me Sprint HTC Evo rooted and I cannot activate on Sprint because I cannot get correct MSL. Sprint Tech gave me number it thought was correct but no luck. I downloaded a msl reader, EScode from PCWorld and it gave the same number Sprint had for the msl.
So, can anyone give me some help on how to obtain the msl?
Thanks for the help.
Click to expand...
Click to collapse
You may want to do a Factory Reset from Menu > Settings > SD & phone storage > Factory data reset.
After the phone reboots, it may go through the hands free activation. If it does, you're set. If not, by this time you should be able to enter the MSL. I would recommend doing a Data Profile restore by opening up the virtual keypad, typing ##DATA#, entering your MSL, going to Edit Mode and then selecting Data Profile. You'll be taken to the Data Profile page. Once you're there, press the Menu button on the phone and tap on the Restore option. Phone will reboot.
I did this even after rooting with Unrevoked3 and encountering the same issue and it worked.

[Q] How to get MSL with CDMA Workshop for ET4G?

Does anyone how retrieve the MSL code using CDMA Workshop for the Epic Touch? I can easily do it with any HTC phone but it doesnt work with the Epic Touch. I know that you can it easily get it with an app but Im not rooted. Also for whatever reason when I activate a phone to my Sprint account they alway give a MSL code that doesnt work so I always have to get MSL code myself to finish activating the phone. Thanks for anyone who helps.

From a terminal or adb shell just type "getprop ril.MSL"
Sprint used to give the MSL and the One Time Key online. Now they just give you One Time Key, which isn't that useful if this isn't the first activation.

1. Download connectbot from market and type getprop ril.MSL
2. Call sprint and tell them you are traveling overseas on a business trip. This method worked just last week with only two tries. First attempt was shot down when I told them that I was a dev and needed msl to complete my project. As soon as I got off the phone, i called right back and told them that Im traveling overseas on a business trip and the rep gave it to me right over the phone.

To get CDMA Workshop to read the MSL, you first need to dial ##8778# and then choose "all". Afterwards, load up CDMA Workshop and connect to it like you would your HTC phones. Go to the security tab and choose custom password and send "01F2030F5F678FF9". After that just read spc and you'll have your msl!

Thanks for the help but the getprop ril.msl only works for rooted phones.
but beserker15 your method work great. thanks

kali323 said:
Thanks for the help but the getprop ril.msl only works for rooted phones.
Click to expand...
Click to collapse
Glad you got what you needed. getprop works on stock unrooted. It is case sensitive. "getprop ril.MSL" not "getprop ril.msl"

1. Open Dialer on phone
2. Dial ##8778#
3. Connect phone to computer. (hope you have the drivers or Kies installed)
4. Start/ Right Click Computer/Select Manage Computer.
5. Select Device Manager
6. Find What Com Port your Sammy is on.
7. Open CDMA WS
8. Select Com port and USB
9. Click Connect
10. Click Read
11. Select the Security Tab
12. Password Select Samsung Default. If that isn't there click where you enter one and enter this; 01F2030F5F678FF9. Click Send
13. Look in the box under SPC and see your MSL.

[Q] Flash help please

I had my Epic touch flashed to Boost, but my MSID is 0000000000 instead of my number, which is giving me error 67 and no data connection. When I go into the menu using the MSL to fix it, it won't take. I select the edit screen, and it has a box at the bottom which says "touch here". I do, then the key pad comes up and I type the number in, but it won't delete the "touch here" characters, and then when I go out and click done and it reboots, theres still no data, and I go back in the the MSID is back to all 0s.
I literally got this phone yesterday and I'm not sure if there's a problem with the flash or if its user error on my part not knowing how to edit my MSID.
Thanks for any help you guys can offer.

I believe you can edit the msid from qpst build 323. I personally use cdma workshop tho.
Sent from my BAD A$$ EPIC TOUCH 4G

I tried finding CDMA workshop, but I couldn't find a free copy. I didn't want to spend $200 just to fix my MSID.
I will try QPST though.
Thanks, will let you know

I did not see anywhere to enter my MSID in CDMA or QPST, but that is most likely user error, I havent used those programs much.
UPDATE: I did get the MSID changed and it saved, but it is still giving Error 67: Data username/password.
Anyone have any ideas how to change this, or should I just reflash it?

[Q] FF11 gives me zero 3g, no data connection at all!

Went to FF11 from stock el29 and I do not get a signal at all. I don't know why but it doesn't matter where I go. I have traveled a couple hours around my area and still no signal. Not even 3g icon appears. This can't be the OTA could it?! Or am I missing something?

update profile and prl

I was getting the same if you turn on airplane mode turn off then reboot it will come back.
Sent from my SPH-D710 using xda premium

did all the above mentioned
thanks for the advice but i've done those things several times, also tried out 5 different modems...can't find one to even get the 3g icon on...weird bc it shows 4 solid bars but no 3g or data

Possible Sprint outage in your area. Its been happening a lot lately.

you could try doing that reactivation thing too...
Type getprop ril.MSL in adb shell or terminal to retrieve your MSL and write it down
Then dial ##72786# from the Dialer and enter that MSL.

vanberge said:
you could try doing that reactivation thing too...
Type getprop ril.MSL in adb shell or terminal to retrieve your MSL and write it down
Then dial ##72786# from the Dialer and enter that MSL.
Click to expand...
Click to collapse
This is probably the best advice you'll get. After fudging with network settings for days trying various tweaks and crazy ideas of mine, I doinked mine completely too. This does a 'factory reset' on your network settings. You'll have to 'activate' your phone afterwards and should also then do a PRL update and Network update again just to make sure.
edit. I'm assuming you used sfhub's stock rooted one-click. If you didn't - do that first!

Yeah, highly suggested the full wipe, not the nodata, version.

Huh?
vanberge said:
Type getprop ril.MSL in adb shell or terminal to retrieve your MSL and write it down
Then dial ##72786# from the Dialer and enter that MSL.
Click to expand...
Click to collapse
I have no idea how to do that.

Jroocan83 said:
I have no idea how to do that.
Click to expand...
Click to collapse
He is trying to get you to clear out your NVRAM, which is where the network programming information is stored. The MSL is a unique code for your phone that allows for many different diagnostics on your phone, including a full wipe, NVRAM wipe only, editing your data settings, and much much more. It is used in conjuntion with different codes you can put into your dialer, all following a ##_____# format.
The reason this might help is because no matter how many times you flash, the NVRAM never gets touched. So forcing this information to reset itself will basically re-attach it to the network.
An easier way to get your MSL is to go to the market and download Get My MSL. Run the program and it will kick out a 6 digit number. Write down that number.
Then go to the dialer and and punch in ##72786#. This will then prompt you for you for your MSL. It will then bring up a window that says SCRTN. Hit yes on that window, and it will wipe your programming out. The phone will reboot and reactivate itself.
It's kind of the end all be all of profile updates. If this doesn't work, nothing will. You will either have to go back to GB, or, if you live in a major city, wait for them to finish working on your tower, as it is likely that they are flipping it over to be the new Sprint towers that have better signal and support LTE.

Jroocan83 said:
I have no idea how to do that.
Click to expand...
Click to collapse
You need a terminal emulator. I assume any of them will work, but I use this. Open said terminal emulator, and type in the command "getprop ril.MSL" without the quotes. It should return a number (mine was 6 digits, I assume they're all 6 digits). This is your MSL. Note the command is case sensitive, meaning getprop ril.msl will not work.
Now open the dialer, like you were going to make a phone call, and type ##72786#. I believe you then push the green "send" button, and then type the MSL. That should send a signal to reprogram your phone's radio from Sprint. (Note I may be slightly incorrect on this part, I've never really had a reason to do this myself).

A little more info would help a lot like, How did you update to FF11? Also did you do a full wipe before updating to FF11? You might have to do a clean wipe! And odin is the best way (safest) to install ICS in my opinion. Could be a modem problem also. Id reflash back to gingerbread with odin, wipe clean with Caulkulins format all zip, then odin back a fresh install of FF11. Always follow the safest ways to flash and you will have better chances of having a good running rom.