[Q] Coming from Nexus One, is there a similar pouch? - Galaxy S II Accessories

Hey guys, like the title says... is there something like the Nexus One pouch for the Galaxy S2? I don't need fancy cases and what not. Just something to protect the phone when Im not using it...

How was the N1 pouch! I don't know that. But I can recommend some great pouches out there.
For Full cover Flip Top Leather pouch,
Either Zenus Prestige Carbon or SGP Argos.
For Non full cover case,
Case Mate Tough (I am using).
For looking and some protection,
SGP Neo Hybrid.
Regards.

The N1 had a neoprene slip pouch, which added a fair bit to the overall thickness of the phone. While it was handy, there was something perverse about doing the same thing with the ultra slim Galaxy S2!
In the end, I went with the leather pouch case made by Sena. It took a few days to stretch out, especially over the case mate barely there cover, but looks nice.

Related

[Q] Leather pouch that will accomodate Galaxy S2 + TPU S-Line case - help!

Hi guys,
I've just bought a Galaxy S2 and have fitted it into an S-Line silicon case.
The case is great, but I am trying to find a vertical leather pouch that I can fit this combination in to.
Has anybody found a leather pouch that will accommodate this combination of phone and silicon case?
Many thanks
Chris,
I also kinda had a similar thought with you. Since im ising this thin mercury & anymi case and like to combine with leather case. You might wanna consider this
Check out this item I found on eBay:
Cowhide Leather Case for Samsung Galaxy S2 i9100 Brown
Link: http://cgi.ebay.com/Cowhide-Leather-Case-Samsung-Galaxy-S2-i9100-Brown-/160592753187
Of course the only situation is how thick your case right now? Since they are made from leather
sent from my 2.3.3|dxjpe DJGTabs7

[Case]Case compatibility list for 2000mah kit

Hello all,
As i'm sure some of you have been trying to find a case that fits the 2000mah kit from Samsung and having a lot of trouble? well being a case whore i'm building a collective list of cases which do or do not fit, if you have any info please PM me and i'll add your results to the list, please PM fitting and non fitting cases, but please CTRL+F and search for the case your going to PM me incase it's already on the list. without further ado;
DOES FIT
[CM014056] Case-Mate Tough (However it is very tight, and ideally need the rear rubber being trimmed OR removed back cover)
[CM015699] Case-Mate Safe skin (Fits but has a loose area below camera)
[EF-C1A2B*EC] Samsung Galaxy S2 Flip Cover (Rear side cut out around battery cover, perfect fit)
[EF-CA12P] Samsung Leather Pouch Case (Tight but fits, some screen protectors may dislodge)
[Not Known] Samsung D30 Galaxy S II Leather Slip Case (Tight but fits, some screen protectors may dislodge)
[EF-C1A2LBEC] Samsung Galaxy S II Leather Pouch Case (Fits fine)
[Not Known] SGP Samsung Galaxy S2 Case Neo Hybrid EX (Fits fine)
[Not Known] SGP Linear Series (Fits)
[Not Known] SGP Samsung Galaxy S2 Case Neo Hybrid (Fits but has a loose area below camera)
[Not Known] SGP Neo Ultra capsule (Fits)
[F8M136EBC00] Belkin Samsung Galaxy Swell Grip Graphix (Fits but loose around camera area)
[Not Known] Nillkin TPU (Nearly Perfect)
[SAM4-I9100-20-E4OTR_A] Otterbox Commuter for Galaxy S2 (Fits, slightly loose area above the extended battery cover)
[ICPSAI9100D1D] i Case Pro (Fits)
[Not Known] Aeonaz POLARBEAR (Light modification required)
[Not Known] Zenus Air Jacket
[3BSSGXF41] PDair Leather Case Flip Type
[Not Known] Rearth Ringke Case
[CM014641] Case-Mate Pop Case
DOES NOT FIT
[CM014048] Case-Mate Barely There Case (Will not clip on at all)
[SAMGS2CCBL] Samsung Genuine Mesh Vent Case (Will no clip on at all)
[EEB-U20BBUG] Samsung S2 Power Pack (Cannot align usb connector without damage)
[EF-GS2L] Samsung Moulded Leather Flip Case (clips cannot stretch to phone body due to moulded back)
Some pics would be realy realy nice, so everybody could see how it fits and if they could get used to it.
EDIT: Also you can add the SGP Neo Hybrid and SGP Neo Hybrid EX to the list. First one has a loose are around the camera (as seen in another thread) and the other one fits nicely.
I would put some pictures up but I don't own all of them, and a few I've checked out in Retail stores, however If I buy any that fit, i'll make sure I post up photos of the fit.
Then just put the pictures in you own. Some others who have the extended battery and a case could send you their pictures and you could implement them into your post.
When I get my S2, 2000 mAh battery and decided for a case i will do some pictures for you, too.
PS: You could link every name of the cases to their official pages, too.
Here are some:
SGP Neo Hybrid EX: sgpstore.com/cell-phone/samsung/galaxy-s2/sgp-samsung-galaxy-s2-case-neo-hybrid-ex-series.html
SGP Neo Hybrid: sgpstore.com/cell-phone/samsung/galaxy-s2/sgp-samsung-galaxy-s2-case-neo-hybrid-series.html
Case-Mate Tough: case-mate.com/Samsung-Galaxy-S-II-Cases/Case-Mate-Samsung-Galaxy-S-II-Tough-Cases.asp
Case-Mate Barely There: case-mate.com/Samsung-Galaxy-S-II-Cases/Case-Mate-Samsung-Galaxy-S-II-Barely-There-Cases.asp
Hope I can help improving your thread I think your thread can help very many people.
Would love to know about the Otterbox Commuter compatibility.
anyone tried with casemate pop? might as well getting 2000mah battery rather than getting another spare samsung ori battery if pop case fits well
jytow0716 said:
anyone tried with casemate pop? might as well getting 2000mah battery rather than getting another spare samsung ori battery if pop case fits well
Click to expand...
Click to collapse
I've tried it and sad to say it just wouldn't fit
Add nilkin tpu..almost perfect fit
Sent from my GT-I9100 using xda premium
What about this Case:
- Belkin Grip Graphix Swell Does it fit?
would really like to find out if the pleomax casing able to fit?
zOunda said:
What about this Case:
- Belkin Grip Graphix Swell Does it fit?
Click to expand...
Click to collapse
Hi all!
Yes, as most soft cases the Graphix fits, but you'll see some looseness in the camera section. Also, I did not like the grip of this case at all, it felt slippery imo.
I went for the Neon hybrid instead, very satisfied.
How tight is the fit on the Case Mate Tough case with the 2000mah battery? I like the look of it and just placed an order for it. Is it so tight that there's a risk of damaging the phone?
Zenus Skin Air Jacket
Just got the new battery and put it in my Zenus Skin Air Jacket... dont know what to say... sadly it doesnt fit... but its useable.
The edge of the phone comes out a bit and therefore the access to the volume and powerbutton is limited.
I made some photos but cant post the links due lack of postcount
The Walnutt bumper fits for sure, but hell, it it even fits my Momax 2700mah Expower batts, so that's a moot point.
I am within the M25 and have an otterbox for my S2 if you need to try it then pm me.
what is the sense of using a bumper of a sgp neo hybrid ?
i mean, isnt the purpose of a case to cover the whole phone? both the examples above mentioned appear to just cover the borders of the phone, leaving uncovered the whole back of it.
actually sgp neo hybrid series sounds just like a overpriced bumper.
anyone, can prove the opposite?
actually i am very interested in this because it looks like there is no real hard non/bumper case fitting with the new battery: and the only (crappy) solutions appear to be either bumpers or gum/rubber cases ...
sooby77 said:
How tight is the fit on the Case Mate Tough case with the 2000mah battery? I like the look of it and just placed an order for it. Is it so tight that there's a risk of damaging the phone?
Click to expand...
Click to collapse
IT fits but the rubber part is under a small amount of pressure, pushing the phone out of the hard plastic casing. it is MINIMAL, if your like me and fiddle with your phone all the time, it is just a case of pushing it with the lightest touch back in.
It won't damage the phone unless your trying the impossible (pushing the phone into the bottom cutout.) and pushing so hard you crack the hard plastic shell in otherwords impossible. the ideal would be to cut the rubber out in the shape of the battery lid compartment. on the rubber part, then assembling with the hard casing. so you remove the tension off the added thickness.
if I have a hybrid neo spg .... and put the battery without the back cover ... only with the case spg ... looks good? or can cause problems? (Sorry for my English)
Enviado desde mi GT-I9100 usando Tapatalk
diablous said:
IT fits but the rubber part is under a small amount of pressure, pushing the phone out of the hard plastic casing. it is MINIMAL, if your like me and fiddle with your phone all the time, it is just a case of pushing it with the lightest touch back in.
It won't damage the phone unless your trying the impossible (pushing the phone into the bottom cutout.) and pushing so hard you crack the hard plastic shell in otherwords impossible. the ideal would be to cut the rubber out in the shape of the battery lid compartment. on the rubber part, then assembling with the hard casing. so you remove the tension off the added thickness.
Click to expand...
Click to collapse
Cool. Thanks for the detailed description. I hate to mangle new case, but I may have to do that. Wonder if cutting out the battery compartment rubber part may reduce shock resistance of the case.
Can anyone tell me if it will fit in the Samsung Leather Pouch?
If not are there any other 'pouch' style cases that will?
thanks

Searching for a SLIM case

Hi, i'm searching for a SLIM case, but unlike the Barely There from Case-mate i want it to fully cover the phone.
Is there any around them? my research got no results
i have a ringke slim case on mine right now. fits the oem extended battery, its a pretty nice case and very slim
msnglink said:
i have a ringke slim case on mine right now. fits the oem extended battery, its a pretty nice case and very slim
Click to expand...
Click to collapse
It does not cover the phone
try the sgp neo hybrid, its the thinnest dual layer case ive seen. i cut out the backing now so i use it as a bumber case.
hey im like you. i love the barely there case but i also had a problem with it offering just partial protection.
i ended up with the sgp ultra hybrid case. and i couldnt be happier. very slim. very well built. the only thing it doesnt cover is the screen. doesnt add much bulk.
i also have the sgp ultra capsule.. its just too shiny looking for me.
Diztronic Matte
I like the Diztronic Matte Back Black Flexible *Revision 3* TPU Case.
$9.89 on Amazon, thin and covers phone
Incipio Silicrylic case ftw.
Sent from my Galaxy Nexus running AOKP+Franco on Tapatalk 2
baibye said:
I like the Diztronic Matte Back Black Flexible *Revision 3* TPU Case.
$9.89 on Amazon, thin and covers phone
Click to expand...
Click to collapse
+1
I buy Diztronics for all my phones.
Just got the alpine white ringke slim case. Best case I have come across. Looks amazing!
Sent from my Galaxy Nexus using XDA
I recommend either one of these. The Ultra Hybrid may look thick, but it's actually thinner than the Cruzer Lite one as much to my surprise.
Ultry Hybrid:
http://www.youtube.com/watch?v=SHjQdA1ueaY&list=UUbfFMjyhflN4xFOFEmPj-wg&index=1&feature=plcp
Cruzer Lite:
http://www.youtube.com/watch?v=NH8TPxSFt6w&list=UUbfFMjyhflN4xFOFEmPj-wg&index=6&feature=plcp
I like the cruzer lite, it adds a thick enough "lip" over the face of the phone that setting it down doesn't allow your screen to contact the surface you set it on. Plus it's only $9.
theyownus said:
+1
I buy Diztronics for all my phones.
Click to expand...
Click to collapse
+2
I also have this case and I really like it. It's matte, though, so it's not exactly grippy, if you're looking for that.
thinnest and uber cheap case
Hi there,
I'm not quite sure how thin you would like your case to be, but I recently discovered a couple of cases on ebay that may fit your description.
LINK: I'm sorry, I am a relatively new user on XDA and I can't post link just yet. However, you can ebay a seller called "smokydiscount" and keywords: 0.2mm Ultra thin case for galaxy nexus prime. Otherwise, just PM me.
MY OPINION: I really like these cases and they're great for scratch protection. As for drops and bumps, these cases are negligible; your phone will probably be just as damaged as compared to without a case.
PROS:
- Incredibly thin. It's as if your phone doesn't have a case on it
- WILL protect the back from any scratches. You can leave your phone on a rough surface without any concerns
- Very cheap
CONS:
- There is no front lip, meaning if you put your phone face down on a rough surface, beware. However, the case does come with a screen protector which is fairly decent (ALMOST to the same standard as Brando screen protectors)
- For some reason it does make the phone more slippery. The plastic doesn't provide any grip
- The case is very fragile when it is not applied on your phone. I had to get a replacement sent out because the case came to my house cracked, most probably due to the postage and handling.
Despite the cons, this is definitely one of my favourite cases. Check them out.
TPU rubber case with stand on amazon only 3 bucks and it covers everything , just need a screen protector
Sent from a Black Ice Sprint Galaxy Nexus
I just just got the Speck Pixel skin HD, and its pretty great. Thinner profile than my otter box commuter, yet it feels much better. It looks pretty good, but I don't know if it was really worth $30
Sent from my Galaxy Nexus using Tapatalk 2

Any non leather cases?

Leather has a nasty feeling to me, especially when it is cheap leather.
I cannot believe there is not some sort of padded case, or silicone...SOMETHING other than leather. I find it hard to believe all there is is cheap bulky leather cases for the Infinity.
Please link to all non leather cases for those of us that don't like leather cases.
roncoallstar said:
Leather has a nasty feeling to me, especially when it is cheap leather.
I cannot believe there is not some sort of padded case, or silicone...SOMETHING other than leather. I find it hard to believe all there is is cheap bulky leather cases for the Infinity.
Please link to all non leather cases for those of us that don't like leather cases.
Click to expand...
Click to collapse
Wow, I love the feel, and smell of good leather. There are TPU cases too.
I love the Samsung Galaxy Tab case, it's aroiund $60 but looks really good...we need one like this for Asus tabs...
http://www.mobiletechreview.com/ubbthreads/showflat.php?Number=40936
snyph3r said:
I love the Samsung Galaxy Tab case, it's aroiund $60 but looks really good...we need one like this for Asus tabs...
http://www.mobiletechreview.com/ubbthreads/showflat.php?Number=40936
Click to expand...
Click to collapse
This is one of my favorite case,it was great when i had my Galaxy Tab 10.1
I bought this one: http://www.amazon.com/gp/product/B004T655OW/ref=oh_details_o02_s00_i00
It's nothing exciting, but it's not leather, and it has a pocket for SD cards and screen wipes.
I use the ballistic sg case. My wife uses the incipio silicryllic case.
Sent from my Sony Xperia Ion using Tapatalk 2.
There is a whole thread on cases
http://forum.xda-developers.com/showthread.php?t=1734236
I bought the incipio Aoba but returned it immediately because you couldn't even press the buttons through the case, it was rock hard
http://www.amazon.com/gp/product/B0089Q83SS/ref=oh_details_o03_s00_i00
Bought the incipio silicrylic after that and love it. It has a soft gel case that's easy to push the buttons but also has a hard shell that protects each of the corners.
http://www.amazon.com/gp/product/B0085MLUE0/ref=oh_details_o01_s00_i00

[Poll] Which case is better?

Hi guys,
I am looking for a case for a new Galaxy Nexus I bought..
I would like to request answers with advantages and disadvantages for the following cases:
* SGP Ultra Hybrid
* SGP Neo Hybrid
* Diztronic Matte Back Black / Smoke
I must say - I am working in a really rough place - this is why I need a slim and yet really though case
And I currently own a Galaxy S2 with SGP Neo Hybrid case - and I was pretty impressed by its greatness of protecting my phone
But I would like to acquire a case that is a one piece and not two pieces
BTW - please vote on my poll
Thanks in advanced,
Din.
I have the diztronic case and I can say that it does a good job of protecting the phone while still feeling slim in the hand. I can't speak for the SGP as I've never tried one.
I recommend either the ultra hybrid or ultra capsule. They're light , durable, and stylish. Had them both
Sent from my GNex
Diztronic case here also. Great slim case for the price. Nice fit also even with 2000mah extended battery.
Sent from my Galaxy Nexus using xda app-developers app
Thanks for the comments so far,
One thing I didn't mention - the price isn't my concern..
Please - more comments..
winnope said:
I recommend either the ultra hybrid or ultra capsule. They're light , durable, and stylish. Had them both
Sent from my GNex
Click to expand...
Click to collapse
The ultra hybrid or ultra capsule cases...anybody have a link I never hear of those??
here - ultra hybrid:
http://www.spigen.com/cell-phone/google/sgp-samsung-galaxy-nexus-case-ultra-hybrid-series.html
you can find the others in their website
I'm using a cruzerlite right now and love it. The colors they provide, the protection you get, and the soft case that doesn't make it that much bulkier. The only thing is that it's been pushing up on my screen protector..
Sent from my Galaxy Nexus using xda app-developers app
thank you..looks good..i,m really liking the Mercury tpu cases..waiting for my yelow one to arrive
the diztronic has more lip on it so I would go that route for slightly better protection. the mercury TPU cases are also really nice but they only fit the GSM variants.
I have the Dizitronic case as well. I have some others that I use but that is my primary one. Provides a decent amount of protection and doesn't add much bulk - I like the lip on it as well because I can set the phone down on its face without any concern.
If you want something that is more 'tough' might want to check out the Incipio Silicrylic cases as well. Dual layer so will probably handle a drop better than these TPU style cases. I use that for days when I am being active (running, hiking, etc).
mbh87 said:
the diztronic has more lip on it so I would go that route for slightly better protection. the mercury TPU cases are also really nice but they only fit the GSM variants.
Click to expand...
Click to collapse
Yup..i know,thats what I have..GSM..the Future :]
i have the Ultra hybrid and while it doesnt provide that much protection you arent going to find a thin case that offers any true protection, If you want a protective case i would go with the Kraken or Otterbox or something of the like. Otherwise the fit and design of the Ultra Hybrid is absolutely perfect if you have a GSM phone it provides good protection for cosmetic damage and has a small lip which provides some level of protection when you place the phone screen side down.
the Ultrahybrid also does not attract lint nor does it stick in your pocket like some other TPU/silicon cases. I personally recommend the ultrahybrid if you are going for a minimalist case.
The Neohybrid is one i would definitely stay away from especially if you use multiple batteries and need to pull the phone out of the case alot. Over time the silicon sleeve will become loose and just wont fit your phone nice and snug as it had before.
hope this helps.
- Cheers
I have neo hybrid and kraken. Kraken is like wearing a suit of armor. Its huge and heavy but a great case. I have the neo on it now and love it. Light, grips well and looks nice.
From the mind of Minolta

Categories

Resources