Related
I was tired of waiting for SGP to get their $^#& together and decided to get yet another case.
I got this Perforated Retro Sports Case from Fommy.com.
http://www.fommy.com/view-full-page.asp?divid=Samsung&model=Samsung+Vibrant+T959&skuno=89299
I'm not sure what makes it "retro", but it is a nice looking case. It's a combination of hard plastic (the perforated area) and flexible plastic sides. It's thin - not like the Samsung mesh or Case Mate Barely There - thin, but probably a touch thinner than the average TPU case.
The case covers all sides, although you can still see a bit of the bezel. However, unlike a different case I tried, the amount that peeks out is consistent all around so it still looks nice.
Now, it's not without it's quirks - which may be deal breakers for some. First there are no cutouts for the speaker or the mic. The speaker is no big deal because the case is perforated - I didn't really notice much difference in volume of some music I tried. The mic, on the other hand, required a hammer and nail to deal with. It was pretty simple, though. I just lined up the hole from another case and then hammered a small nail through. It works just fine and I tested some calls with no reports of sound loss on the receiver's end.
The other "quirk" is that the cutouts on the top and sides are a little strange. The one on the volume side is really long and spans over the rocker keys and the strap-loop-hole. It's tapered well along the edges so it doesn't look bad or anything, just a little odd. The top opening also spans across both the jack and the usb port. This makes the bar along the top feel a little less solid than the rest of the flexible areas. I would have preferred they used two separate openings on top rather than one for the extra support. It's also cut rather close to the port, so if you are using a thick plug, you have to move the plastic up a bit. A little annoying, but at least you don't have to take the case off to plug it in like with some cases.
Things may change after a week of use, but my initial impression is positive. Overall, the case is very nice and is unique compared to the other stuff that's currently available. I do, however, think it's a bit pricey at $14.95+shipping (around $5 for super saver). But hey, money grows on trees.
Just ordered mine, From the looks of it, I think i will like this case better than the perforated plastic snap on case. This one looks like it offers full phone protection. tell me if the case would protect the phone in the event of a fall or drop. Rate its protection from a fall as either minimal, moderate, or maximum protection. I would appreciate your advice. Thanks
Since it covers all sides the protection is going to be better than the snap on. But its thin and pretty stiff so impact resistance is probably minimal to moderate at best, especially compared to silicone or TPU.
Sent from my SGH-T959 using XDA App
thanks for the review, but i would be worried about knowing from the get go that i would need to use a hammer and nails to get a plastic case to work.
mikey98277 said:
thanks for the review, but i would be worried about knowing from the get go that i would need to use a hammer and nails to get a plastic case to work.
Click to expand...
Click to collapse
Very true. I didn't try calls before making the hole so I'm not entirely sure it's necessary (although I imagine you would get a drop in sound quality with the hole covered).
I love this case. It is slim and perfectly follows the contours of the phone. The only thing that i didnt like was the hole missing over the microphone. But the texture and quality of the case is top notch. I have the mesh galaxy s back cover, the tpu grey argyle case, the body glove rubber case, the case mate tough case, and the carbon fiber samsung case. This one is the best of them all, I am very happy with this case
whoa, that looks like it'd be pretty ****in sweet if they made them 2 tone..
turbosix said:
whoa, that looks like it'd be pretty ****in sweet if they made them 2 tone..
Click to expand...
Click to collapse
http://cgi.ebay.com/Black-Blue-XMat...268389?pt=PDA_Accessories&hash=item5d2b1cd525
Like this?
talltexan said:
http://cgi.ebay.com/Black-Blue-XMat...268389?pt=PDA_Accessories&hash=item5d2b1cd525
Like this?
http://s3.amazonaws.com/daydeal_com/t959_xmartrix_blublk1.jpg[/IG][/QUOTE]
i love you more than you could ever know. :eek:
Click to expand...
Click to collapse
turbosix said:
i love you more than you could ever know.
Click to expand...
Click to collapse
they also have pink and white if your into that just search Xmatrix Vibrant case. They are cheaper than OP's so i dont know if they are the same or not but they do look the same.
I ordered this case on Tuesday and it came today. I am very impressed and the quality is much better then I expected.
Did the one you got off Ebay come with the hole for the mic already cut? Looks in their photos like it's there already.
No i ordered it from fommy and I forgot about the missing mic hole lol.
dashed said:
No i ordered it from fommy and I forgot about the missing mic hole lol.
Click to expand...
Click to collapse
I ordered the blue and black one from fommy on thursday and received it today. Mine has the mic hole already cut out. In my opinion it feels just a little bit loose and kinda cheep. I like the way it looks and is very slim so I'm gonna give it some time to see if it grows on me or if i want something else
The black case I received fits extremely well and is not loose at all.
Great Deal on this Case
I'm getting one from Handhelditems.com found here xmatrix case and it's 10.99 and $2.89 shipping, plus I used coupon code 30vibrantsamsung and got 3.30 (30%) off. Price out the door - $10.54. Helluvuh deal
Got the case today. It sucks.
Sent from my SGH-T959 using XDA App
You guys should try this case too. (Incipio Feather case) I spent like 3 days searching for the perfect case for my captivate (from silicone case to leather pouch) and this one has by far the best quality and look, not to mention about the extreme thinness. Got it this afternoon and fits perfect to the phone and looks great as in the picture. The only draw back is that it doesn't cover the front side, but I can live with that.
I loved that case with my iphone, it's crazy light and thin. The only problem I had on my iphone is all I could get was white and it got nasty dirty in a week, so I would advise against white
Sent from my SGH-I897
samzoferrari said:
You guys should try this case too. (Incipio Feather case) I spent like 3 days searching for the perfect case for my captivate (from silicone case to leather pouch) and this one has by far the best quality and look, not to mention about the extreme thinness. Got it this afternoon and fits perfect to the phone and looks great as in the picture. The only draw back is that it doesn't cover the front side, but I can live with that.
Click to expand...
Click to collapse
Is it made of the soft rubber like material that gathers dust?
it's made of plastic, but looks like it's mixed w/ some sort of rubber or soft material because it's got that little bit of soft touch. (maybe that's why it's more flexible too) So far it doesn't gather any dust like some silicone cases do, but i will have to see more since i just got it today.
i wish they had more colors. Black phones get lost in the void that is my purse.
ladymelody said:
i wish they had more colors. Black phones get lost in the void that is my purse.
Click to expand...
Click to collapse
Ebay captivate incipio and they have the exact same case but in pink (but its called magenta)
From the eBay description: "With a convenient two-part sliding design, the EDGE™ embodies innovative cases focused on accessibility. Simply remove the bottom cap to dock your device in most any docking station for quick and easy charging."
I have a home dock I put the phone in every night. This is the main reason I stopped using a case. How does this design work with the Samsung dock? I can't tell from the pictures and I'm not willing to risk $25 to find out.
Miami_Son said:
From the eBay description: "With a convenient two-part sliding design, the EDGE™ embodies innovative cases focused on accessibility. Simply remove the bottom cap to dock your device in most any docking station for quick and easy charging."
I have a home dock I put the phone in every night. This is the main reason I stopped using a case. How does this design work with the Samsung dock? I can't tell from the pictures and I'm not willing to risk $25 to find out.
Click to expand...
Click to collapse
Not sure if you realize but the EDGE is a different case than the Feather, which is what the OP got. Again, sorry if you knew that. Just thought you might not realize.
fooldog01 said:
Not sure if you realize but the EDGE is a different case than the Feather, which is what the OP got. Again, sorry if you knew that. Just thought you might not realize.
Click to expand...
Click to collapse
I thought so, but the one I was looking at on eBay (that I took that quote from) matched the one in the pic the OP posted.
Just wondering if this slides on like a silicone case or if it clips on like other hard plastic cases, is it hard plastic or like a hard silicone?
Any way you could take a picture, the incipio site doesn't really show anything to great about it?
Does it fit tight?
How does it hook on?
Even though I'm a dude I'm tempted to get the "Magenta" one just to spruce up my phone haha.
Is it hard to get on and off? I need to replace my battery once a day.
The Feather is 1 piece that snaps on, and from the pictures, it looks like it only hugs the corners. The EDGE is a 2 piece snap on case.
*taken from http://www.myincipio.com/
Does anyone have any photos of this case from the top or sides? I can't find any real world or manufacturer pics of that.
that looks nice
it doesn't cover the edges and by the looks of it, it only protects the back and if you place it face down it won't lift the phone off the surface any
It looks nice but it doesn't protect anything. The corners and front have no protection. With my experience when you drop a phone the corners get messed up
So a quick synopsis as I have now used it for a day.
The fit is very good, it actually feels like its protected but still has a very light(even lighter than my Ringke Slim) feel to it. The silicone bumper goes on first and elevates the volume and power buttons, then the actually bumper slides over.
The bumper is NOT aluminum.
I was under the impression it was, and at first glance was disappointed. However the plastic maintains a nice rigid feel in my hand where you feel as if the grip is there. The front and back are also fully protected for placement on either side.
Experiment #1 was combining this with my 5000mah battery and backplate however it was extremely tight and did not have a good feel.
Overall it slides in and out of my pocket, not as slippery as the Ringke but it feels "safer" coming out of the pocket and even while in use. Heres a few pics for everyone to see.
GatesHD said:
The bumper is NOT aluminum.
Click to expand...
Click to collapse
Un-sold. Thanks for the clarification on the shady sellers mis-advertising their wares. Shame.
Just got my case as well. Even though it isn't aluminum it seems like it can absorb a shock quite well. The ad on ebay where I bought mine did state the materials are made of "PC and silicon". The bumper itself is polycarbonate the the inner part is silicon. I'm pretty satisfied I remember in the Galaxy S2 Forums people complained about GPS lock problems with an aluminum case, so that may be something to think about if looking at an aluminum bumper.
hmmm I panicked for a moment there, I've ordered this a few days ago, and I cant believe that I didn't notice its not aluminium...
But having read your posts and a few from the aluminium thread I'm thinking this one might be better.
Can we get more pictures of other colours and stuff?
I had an aluminum bumper on my iphone4. It definitely reduced the signal strength and was not as comfortable as this one is in the hands. I am still debating on which to use as daily driver this or my ringke slim. This one is again very comfortable and protects the nice gunmetal trim of the note. The ringke is slimmer and slicker so it pulls out of pocket easier but does not provide full protection.
Looks horrible sorry.
GatesHD said:
I had an aluminum bumper on my iphone4. It definitely reduced the signal strength and was not as comfortable as this one is in the hands. I am still debating on which to use as daily driver this or my ringke slim. This one is again very comfortable and protects the nice gunmetal trim of the note. The ringke is slimmer and slicker so it pulls out of pocket easier but does not provide full protection.
Click to expand...
Click to collapse
The aluminum bumper reduced the signal on the i4 because the band is the antenna ... it wont affect the note AT ALL... just fyi.
Sent from my GT-N7000 using xda premium
This case is.....
So good...
I like it hehe. It's nice. But I find it funny how 1/4 of a case (a bumper) can cost MORE than other cases! Bah.
Anyone with white Note bought this? If so, a photo shot would be appreciated.
I ordered one today, after seeing this thread. It's pretty much what I was looking for
I see that theres a cutout at the top corner. what's that cutout for? thanks
Don't know for sure, but a number of cases have that cut-out. Antenna placement, maybe?
kanate said:
I see that theres a cutout at the top corner. what's that cutout for? thanks
Click to expand...
Click to collapse
That is the antenna for watching DMB(Digital Multimedia Broadcasting) in Korea.
That feature is only for domestic one.
This is my new cover. Aluminum, brushed and shiny.
Even better buttons now. Because buttons are a bit recessed, I don't accidentally push the buttons anymore, yet they are still easily accessible. Also no decrease in antenna performance.
i32.photobucket.com/albums/d39/damulder/P1050024.jpg
i32.photobucket.com/albums/d39/damulder/P1050026.jpg
i32.photobucket.com/albums/d39/damulder/P1050029.jpg
damulder said:
This is my new cover. Aluminum, brushed and shiny.
Even better buttons now. Because buttons are a bit recessed, I don't accidentally push the buttons anymore, yet they are still easily accessible. Also no decrease in antenna performance.
i32.photobucket.com/albums/d39/damulder/P1050024.jpg
i32.photobucket.com/albums/d39/damulder/P1050026.jpg
i32.photobucket.com/albums/d39/damulder/P1050029.jpg
Click to expand...
Click to collapse
Thats not the anymode though is it?
senectus said:
Thats not the anymode though is it?
Click to expand...
Click to collapse
Oops, you're right, it isn't. I probably should have started a new thread. Just wanted to share.
well well... after two weeks, my order just got refunded, with a message that the case was discovered to be an improper fit for the Note. sounds like they're going back to the drawing board
Ya i Have that bumper case to, its ok but i dont like how the rubber covers so much of the front of the phone. I think i just dont like adding any width to an already large phone.
Anybody who is interested in the Bear motion cases from Amazon:
http://www.amazon.com/gp/product/B00BVWJ94E/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1
These are very nice thin and light hard case that will give light protection for your phone while still being stylish. My two case came in the other day (Black/Gray). I have not receive my One yet but the cases feel real nice in the hand. So if you are looking for a thin and light case, give these a shot.
Pics taken with my Nexus 4:
smooth3d said:
Anybody who is interested in the Bear motion cases from Amazon:
http://www.amazon.com/gp/product/B00BVWJ94E/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1
These are very nice thin and light hard case that will give light protection for your phone while still being stylish. My two case came in the the other day (Black/Gray). I have not receive my One yet but the cases feel real nice in the hand. So if you are looking for a thin and light case, give these a shot.
Click to expand...
Click to collapse
Hey smooth,
Thanks for the pics - are these textured on the inside? It seems they could cause scratching to the back and sides on the phone while being shifted around.
D3luSi0n4L said:
Hey smooth,
Thanks for the pics - are these textured on the inside? It seems they could cause scratching to the back and sides on the phone while being shifted around.
Click to expand...
Click to collapse
Yes they have the same finish as the outside. It's hard to explain but it feels really smooth so I doubt its going the scratch the phone.
It actually feels a bit smoother on the inside. It's barely discernible, but it's there. My fingertips are well tuned, thanks to my woodworking.
It's a fantastic case, but offers almost zero screen protection. If that works for you, $6 from Amazon (US) can't be beat.
smooth3d said:
Yes they have the same finish as the outside. It's hard to explain but it feels really smooth so I doubt its going the scratch the phone.
Click to expand...
Click to collapse
CocheseUGA said:
It actually feels a bit smoother on the inside. It's barely discernible, but it's there. My fingertips are well tuned, thanks to my woodworking.
It's a fantastic case, but offers almost zero screen protection. If that works for you, $6 from Amazon (US) can't be beat.
Click to expand...
Click to collapse
Appreciate the responses, may have to pick one up.
Picked up a green one for 5.99 with Prime shipping. I like it a lot, the texture is real nice, and it is a real tight fit so I dont think it will be moving around in the case, I have taken it on and off a lot in order to show people my nice aluminum phone., and have yet to notice any scratches though you do have to be careful taking it out of the case, as I said it is a tight fit. But Overall I really like the case, it really does offer almost 0 protection. It looks nice and feels nice. My one issue with the volume buttons are a bit difficult to press with it on and it kinda feels like it is something I could make if I had a 3d printer, very thin. Someone who is looking for a real protective case can look elswhere, this is almost all about style.
I just got my phone and this is how it look like in the black case:
Sorry for the poor lighting!
Very nice! I just ordered the gray one from amazon because my poetic borderline case is taking forever to ship. Hopefully this case will give just the right amount of protection.
Sent from my HTC One using xda app-developers app
I ordered some myself the other day. Even though they haven't arrived yet, they look very similar to the ROCK Quicksand cases they made for the Galaxy S3, and HOX. I'm just not digging their logo on the back... I'll probably remove it somehow.
bought the blue one. coming in on monday
great thin case
I really like this case. The texture is superb and sublime. Just enough to barely feel. There are just a couple of things that could be improved to make this case perfect for me.
1) The lip at the corners is slighly recessed and the corners should wrap around the phone a bit more. Almost every time I drop a phone it lands on a corner and with this case it's possible the aluminum could take the impact.
2) Lose the SIM tray cutout.
3) I'd feel better about putting the phone face down if the lip was just a half millimeter higher.
4) Power button cutout isn't quite cutout enough. It should be like the usb cutout which is perfect.
5) Volume cutout is just a bit 'sharp'. I wish the edges were smoothed a bit.
That said, these are nitpicky items and more like suggestions I guess. I would endorse this product.
Galaxy S4 cases
New to the forum. Anyone has suggestions regarding cases for Galaxy S4? There are so many choices out there. Just got confused easily.
I used to have a Bear Motion wallet case for my note and loved it. They seem to have the same wallet case available for S4.
But, I really want to have something simpler this time around. Any suggestions for a snap on case?
Same quality and fitment as Incipio and Spigen @ only $5.99... You can't beat em!
I have the Bear Motion case in grey, and yes, it's definitely a nicely fitted, slim, grippy case. However, the rubbery texture DOES begin to wear off with time. The coating on the edges on the front corners of the case have begun to wear off, revealing grey plastic underneath. Fortunately, it does blend fairly well so it isn't much of an eyesore. Hopefully you'll be able to see what I mean from the attached picture.
There have been a few threads linking to the Shenit TPU Bumper Case that have kinda died out because, well, it's no longer available on Amazon despite having been available long ago with a very future ship date. I ordered mine when the listing first went up on Amazon and it just arrived today! Here are my observations and judgments:
The Details
The case is made from two materials: TPU and a hard plastic. You can see the two materials in the photos on Amazon. It's done in a way that is still incredibly low-profile. The TPU covers all buttons, corners/edges, and ports (not the camera lens nor camera light, though). The hard plastic covers the back, the back corners, and some of the sides. The hard plastic is a *perfect fit* over the camera lens ring - from the back of the phone it is 100% impossible to tell the color of my phone.
Something that can be very clearly seen in the photos, and is the same with the official bumper, are the angles at which the sides have. This causes the feeling that the back edges of the phone "stick out". This seems to be a love-it or hate-it thing for most people. I'm torn about whether I like it or not - it definitely seems different than what I'm used to. That said, this was by no means a surprise for me and I expected it to be just like this. So in my Pro/Con list, this is what I'm talking about with the "back corners sticking out".
Oh, and it came with a piece of red velcro for some reason!
The Good
Overall, it's a very nice and snug fit on the phone yet it's not terribly difficult (also not terribly easy, in a good way) to get it off of the phone. With this case on the phone, I'm certainly not concerned with the phone slipping out whether pulling the phone out of a purse with something tugging on the case nor with skinny jean pockets or anything else. The feel of it is a mix of a TPU feel and a "soft" feel for hard plastic (think the feel of the back of the black version of the Nexus 5 to mean what I mean "soft" for hard plastic, not Quicksand case "soft"). Nobody will have problems with this slipping in and out of their pockets nor is it incredibly slippery either.
For protection, this provides the protection you would hope from a TPU case and not much more. As you can see in the photos, every corner and edge is covered by TPU including the four corners on both the front and back as well as the edges along both the front and back of the phone. The back of the phone, however is only covered with the hard plastic. Take a look at the photos and you can tell where the TPU ends on the insides of the case and where the hard plastic begins on the outsides of the case. This case might protect your phone from a drop and it might not - just like with all TPU cases. If you buy this and you play first-person shooter games where you can change your armor out, this case could be thought of as light armor or perhaps medium armor but no where near heavy armor.
It is definitely an attractive (and Nexus branded!) case that doesn't look like what many of the other $14 cases out there look like. As you can see from the photos, the case is molded perfectly to fit with the camera ring cutout. Speaking of the camera ring, the case is just a tad thicker on the back side than your camera ring so if you lay it down on the back, your camera ring is no longer a protrusion. This may have some implications for those of you with magnetic accessories for the camera ring but I can't really comment much on that. Ultimately, unless you look at the port cutouts or see my white speaker on the front, this case makes it impossible to tell the color of my phone - that's how perfect the molding is for the fit. The ONLY flaw I could find with the case's fit was for the microphone on the top of the phone. The microphone isn't perfectly centered in the hole but it's also not covered either.
The Bad
There are three primary problems I have with the case.
First of all, a quick browsing at the time I wrote this turned up quite unfruitful in actually identifying where you can even buy this case today! It is now listed as unavailable on all of the Amazon postings and even all of the eBay cases that look just like the OEM bumper case have seemed to vanish. I'm curious if you can even buy this case anymore as I couldn't find it anywhere now!
So here's the first knock on the case: The buttons have a mushy feel with terrible feedback on the power/volume buttons. We all know that cases tend to be Good, Meh, or Bad here and this case definitely qualifies as bad. Sorry!
And the last thing:The USB Port cutout, while appearing quite large, is unfortunately too small for a variety of USB cables. The first 3 USB cables I randomly grabbed didn't fit comfortable in the space provided although the fourth one did. So you'll have to find a cable that will fit in there if you ever need one and don't use Qi for all of your charging needs.
Pros:
Nexus Branded!
Plenty of color options and cheap (it was $14 shipped from Amazon)
Great snug fit with perfect molding to the phone
Feels like you hope it would feel from the photos
Very low profile - better than your typical TPU case (except for the back corners sticking out)
Plenty of room around the 3.5mm audio port.
Won't affect NFC, Qi, or radios
Cons:
Hard to buy (no longer on Amazon and the eBay lookalikes are no longer listed either)
Took a month to ship
Bad button tactile feedback
Many USB cables won't fit in the cutout for the USB port
I hope you enjoy!!
Sent from my Nexus 5 using Tapatalk
I just got mine today too. I got the blue one. Does it feel like pyramid shaped to you? Mine does. The back is thicker than the front. Buttons are not that bad. Better than some of the cheap tpus. I can still see some white bordering the camera in the back. Not too bad a case. But the shape is weird. Does the original case have that pyramid shape? If you hold it by the sides you cab definitely feel that the back is wider than the front (lip).
Sent from my Nexus 5 using Tapatalk
Just added the more thorough review and several photos. Hope you guys enjoy! Feel free to ask any questions you might have!
guapinoy said:
Does it feel like pyramid shaped to you? Mine does. The back is thicker than the front. <<snip>> But the shape is weird. Does the original case have that pyramid shape? If you hold it by the sides you cab definitely feel that the back is wider than the front (lip).
Click to expand...
Click to collapse
Yup, I commented on this in my more thorough review. It's different than I'm used to but exactly what I expected from the photos on Amazon (and Google's OEM listings/reviews as well). I still don't know if I like it or not. Like you said, it's weird.
guapinoy said:
Buttons are not that bad. Better than some of the cheap tpus. I can still see some white bordering the camera in the back. Not too bad a case.
Click to expand...
Click to collapse
If I compared this to the worst TPU case I've ever had (and I've had some bad ones) that was rated as a 1 from 1-10, then I'd give this case a 2. You're right, there is worse. But not much worse - it's pretty bad. Maybe your blue one has slightly different buttons than mine but mine is pretty bad.
For the white around my camera on the back, I can't see any white whatsoever. At least I don't think I can even as I'm trying to look for it although I guess it's possible that the white + shadow makes it blend in with my light gray case. I don't see it, though.
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Onismurai said:
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Click to expand...
Click to collapse
That looks like the same case but is definitely different packaging than what I received. Thanks for the link though, I was unable to find those on eBay when I tried yesterday.
Onismurai said:
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Click to expand...
Click to collapse
Uhh have you seen what most people have been saying about the official bumper? It's a low quality POS for the most part. Not worth full price, and even at $26 it isn't worth it with the peeling, staining, etc. Doesn't matter if it's from the play store. The unofficial ones might even hold up better, who knows, but the standard Google set with the official bumper case isn't exactly high. Besides, there's extra colors with the unofficial ones that some people might enjoy.
Anyway, if anyone still wants these ones I did find a link for super cheap. Of course it will probably take 3 weeks to a month to get to you, which is the case for most things shipping from overseas. But $12.99 shipped should make up for it. The Nexus logo is printed in a different color than the case on some of the color choices (just scroll down on the page to see).
http://www.aliexpress.com/item/For-LG-Google-Nexus-5-bumper-case-FREE-SHIPPING-front-screen-protectors/1612944308.html
God, it can't be any worse than the official bumper. I wish we had a better selection of actual bumper cases.
I'm using the Gray bumper clone for couple days. No staining (yet) , nice soft touch. Back panel is a bit bigger than front (as mentioned in 1st post).
I also have glass protector from Nillkin on, the case doesn't seem to push the glass.
Update: Now it has some blue from my jeans. sigh..
I may certainly be wrong but I'm beginning to think these unofficial cases are the same as the official ones, same manufacturing line and everything.
Sent from my XT1053 using Tapatalk