Develop Bugs

how do i stop the automatic synchronized on my active sync

as mentioned on top
I already set it manual. wtf. when i do something on my phone the activesync, the stupid activesync on my laptop will try to sync with my pda
i already change the schedule to manually in both the check box....damn

hi not sure whether it will work for u but it did for me just do a soft reset while the cable is still plug in active sync will not be able to connect but on the other hand you will not be able to do transfer either but it charges the batt though.

shonan70 said:
hi not sure whether it will work for u but it did for me just do a soft reset while the cable is still plug in active sync will not be able to connect but on the other hand you will not be able to do transfer either but it charges the batt though.
Click to expand...
Click to collapse
I want to upload to my pda to test out my program. I dont want the activesync to be running. I already read all my mail. Not required to sync anymore. How can i do that?

tweakmy said:
I want to upload to my pda to test out my program. I dont want the activesync to be running. I already read all my mail. Not required to sync anymore. How can i do that?
Click to expand...
Click to collapse
Have you tried Activesync Toggle,you can get it Here.

Off-road said:
Have you tried Activesync Toggle,you can get it Here.
Click to expand...
Click to collapse
sorry mate, you are stil misunderstand me. I want it to be hooked on to the phone but not synchronise with the server.

upgrade to vista LLLLLLOOOOOOOLLLLLLLLL thanks M$$$ ...

try this
will connect as guest only - very fast - and not syncronize anything
-- not mine, but can't remember where i got-it --

tweakmy said:
I want to upload to my pda to test out my program. I dont want the activesync to be running. I already read all my mail. Not required to sync anymore. How can i do that?
Click to expand...
Click to collapse
bro meaning is u do not want to sync but u want to access ur card,transfer files etc.. if so you need WM5torage which when activated will be able to access ur card but when deactivated active sync will run more details refer here http://www.modaco.com/content/Smartphone-Software-Freeware-Download-Discussion/238545/WM5torage/

Help! Can't connect the device to PC

Hi guys! After upgrading my ROM to "838Pro_HK_ENG_WM6_Upgrade_20070712" I can't connect my device to pc anymore... My PC found it as a "Generic RNDIS" but now it finds it as "Generic Serial"...
My active sync and RUUWrapper cannot find the device... I want to change my ROM. Need help!

oxydiom said:
Hi guys! After upgrading my ROM to "838Pro_HK_ENG_WM6_Upgrade_20070712" I can't connect my device to pc anymore... My PC found it as a "Generic RNDIS" but now it finds it as "Generic Serial"...
My active sync and RUUWrapper cannot find the device... I want to change my ROM. Need help!
Click to expand...
Click to collapse
Why didn't you try to force the device to bootloader and try again? DON"T PANIC!!!
Then Use the RUU tool attached! and put your favorite xxx.nbh in the folder
Enjoy~~

Try Start/settings/connections/usb to pc and click or unclick the check mark.

dioxda2 said:
Why didn't you try to force the device to bootloader and try again? DON"T PANIC!!!
Click to expand...
Click to collapse
How can I do it?
norwstman30 said:
Try Start/settings/connections/usb to pc and click or unclick the check mark.
Click to expand...
Click to collapse
I have tried it before, if it is marked : Genereic RNDIS
if not: Generic Serial!

oxydiom said:
How can I do it?
I have tried it before, if it is marked : Genereic RNDIS
if not: Generic Serial!
Click to expand...
Click to collapse
boot loader =
side "ok" button + power button, keep pressing (like squeezing), then pick the bottom reset hole for half second then ONLY release the reset, keep pressing the 2 buttons until you see the 3 colors.
OK, please see / read my previous post (scroll up ) tools updated

dioxda2 said:
boot loader =
side "ok" button + power button, keep pressing (like squeezing), then pick the bottom reset hole for half second then ONLY release the reset, keep pressing the 2 buttons until you see the 3 colors.
OK, please see / read my previous post (scroll up ) tools updated
Click to expand...
Click to collapse
You know! Another problem!
I forced the device to the bootloader but it can't connect to PC. My PC founds a new hardware: USB Drive and cannot install it...
What should I do now??!

Have u installed some someware likes cisco VPN

cowboy086 said:
Have u installed some someware likes cisco VPN
Click to expand...
Click to collapse
nope!
I searched the net and found a driver, the problem has been solved

cowboy086 said:
Have u installed some someware likes cisco VPN
Click to expand...
Click to collapse
nope!
I searched the net and found a driver, the problem has been solved

Could you tell me what driver you found that fixed the issue?

branden7 said:
Could you tell me what driver you found that fixed the issue?
Click to expand...
Click to collapse
The file "VistaRUU" in the link below:
HTML:
http://www.modaco.com/content/Windows-Mobile-News/252977/RUU-on-Vista-It-can-be-done-the-ultimate-guide/

my device does not connect also. it says the computer does not recognize this usb device?help

naveen said:
my device does not connect also. it says the computer does not recognize this usb device?help
Click to expand...
Click to collapse
1. restart computer, or
2. reset your Hermes, or
3. uninstall Active-sync, then install again (may need to restart PC again),
OK? ^_^
P.S. be sure that you had tick the usb connection option from the activeSync option. ^_^

dioxda2 said:
1. restart computer, or
2. reset your Hermes, or
3. uninstall Active-sync, then install again (may need to restart PC again),
OK? ^_^
P.S. be sure that you had tick the usb connection option from the activeSync option. ^_^
Click to expand...
Click to collapse
i will try that right now. thank you for the tip
i tired, it did not work. quick question, i called htc for help and they belive the device has failed. i think i have installed some program that is confusing the active sync because it is not completely installed. the program is called netcf something. any feedback would be great!

Email Only Download Once!

I'm using BsB 6.5.1 and 6.5 with variety of versions, after I've created an email account , the first time it downloads all the emails. But the subsequent time, I can't get any new emails after I click "Update Folders".... Any ideas what wrong with this??

echoesian said:
I'm using BsB 6.5.1 and 6.5 with variety of versions, after I've created an email account , the first time it downloads all the emails. But the subsequent time, I can't get any new emails after I click "Update Folders".... Any ideas what wrong with this??
Click to expand...
Click to collapse
i would say connection problem and if not then do MTTY and install the ROM again...

I'm pretty sure it's not a connection issue as I can use the connection to browse the web. I've also tried to use the MTTY before flash the ROM but it is still the same

echoesian said:
I'm pretty sure it's not a connection issue as I can use the connection to browse the web. I've also tried to use the MTTY before flash the ROM but it is still the same
Click to expand...
Click to collapse
The next step would be to try a different ROM then...

I think it's because the missing send/receive button!! I just use the update folders function because I thought it is a new send/receive in 6.5!!

send recieve
Using same ROM - the send recieve button is there but invisible, it is actually the space just right of centre on the bottom bar, press the space and the menu appears with send receive near the bottom of the list

I'm having the exact same problem. But I'm using Gen.Y 5.2 ROM which is Win 6.1.
Only updates the first time. I do have a send/recieve button and I see the email client going through all the stages (connecting, looking for changes, closing) but nothing is downloaded.

FInally I found out the problem! The button is there in the bottom, you need to scroll it down !!!

For Singapore user. Root + flash jme v.4 + data 3G

Hi,
Finally got my galaxy tab to work after 6 hours. Now it is running well.
As it is 4 am here, i will post a guide for Singapore users once i wake up as i have meet with problems during the whole process.
Luckily, all information can be found on this forum but just that you will have to read through 20 plus pages from different topic in order to get the answer.
Super happy with my phone now!
*just another newbie* =)
Sent from my GT-P1000 using XDA App

Sorry to steal your thread. Singaporean tab user here as well. I think we should constantly update this thread for singapore users. I was running dxjm4 up til this morning when i decided to flash to roto-jme. spent the last few days reading the thread and considering whether to upgrade or not because of the lack of information for singapore users. so i decided to take the plunge and just go for the upgrade no risk no gain. my tab got stucked at the samsung logo after it auto rebooted but it was fine after i manually rebooted it
what i did was to upgrade from jm4 instead full flashing my tab. it turned out fine so far but there's one thing that puzzles me. the apps that roto mentioned were removed are still in my tab such as daily briefing etc.. do u have this problem as well?

Not Too Sure... I am new to Galaxy Tab or rather Android =P
But i suggest you do a full flash again.
i wasn't ready to even root my device initially as i only gotten my Tab on Saturday 7th Jan 2011.
One thing that actually forced me to root and flash the rom is the stock version whether bug or not i just couldn't sync with my company exchange 2010, which is critical for me.
Nonetheless, i haven't tried the jme v4 as yet (I suppose) as i did not know how to get it to work.
All i did was follow:
http://forum.xda-developers.com/showthread.php?t=895827
And all went well, except that Data doesn't work.
Thoughout the whole process i did not use the file name "Roto-JME-Full-v4"
which set me thinking whether did i actually do the right thing.
One thing is most of the stock app was gone, baseband was change to I9000UGJK3, Kernel Version 2.6.32.9 [email protected] #1 and Build number is Froyo.XXJME.

HCgoh said:
Not Too Sure... I am new to Galaxy Tab or rather Android =P
But i suggest you do a full flash again.
i wasn't ready to even root my device initially as i only gotten my Tab on Saturday 7th Jan 2011.
One thing that actually forced me to root and flash the rom is the stock version whether bug or not i just couldn't sync with my company exchange 2010, which is critical for me.
Nonetheless, i haven't tried the jme v4 as yet (I suppose) as i did not know how to get it to work.
All i did was follow:
http://forum.xda-developers.com/showthread.php?t=895827
And all went well, except that Data doesn't work.
Thoughout the whole process i did not use the file name "Roto-JME-Full-v4"
which set me thinking whether did i actually do the right thing.
One thing is most of the stock app was gone, baseband was change to I9000UGJK3, Kernel Version 2.6.32.9 [email protected] #1 and Build number is Froyo.XXJME.
Click to expand...
Click to collapse
i am new to android too and this is my first android device. your baseband is weird? I9000? which firmware did u flash???

Root devices *Important Points
And Yes i woke up...
Anyway i do not gain credit from the guide itself as everything can be found in this forum. If you want to thank people, please thank the people that writes the program and the trial & error people if you find my thread useful. I am just consolidating all the steps that i used to flash my Tab, important things to take note of and etc...
Step by step guide to Rooting:
Please read
http://forum.xda-developers.com/showthread.php?t=812367
*Important points to Note when Rooting"
Process:
1) Connect your galaxy tab with debugging mode disabled and sync with Kies even once - You must be damn sure Kies can connect to your phone
2) Disconnect it and enable debugging mode from Settings>Applications>Development>USB Debugging
3) Connect the tab again to PC and click on home button so that Tab comes out of Kies connection - I found that after USB Debugging is turn off, Kies can still find your phone but it will just appear as Connecting... on the top left hand side of Kies. (I left my Kies on throughout the process)
4) Launch SuperOneClick.exe
5) Click on root and wait for 5-10 Mins - it stated 5 - 10 min but it took like 5 - 10 sec for SuperOneClick to prompt me saying that device is rooted.
And that all for Rooting whole process took me about 5 min Including all the reading. (Simple Great Job by SuperOneClick!)
Now comes the slightly complicated part: Flashing New Roms
Below is the thread that is used
1) http://forum.xda-developers.com/showthread.php?t=894763
2) http://forum.xda-developers.com/showthread.php?t=895827
What i did was:
1) Download OdinV3 1.7 (Provided in the thread 895827)
2) Download Addon-JME-Modem.zip (http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/)
3) Download P1_add_hidden.pit (http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/)
4) Download Roto-JME-FmtIntSD.zip (http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/archive/)
Additional:
I also downloaded (But till now i have not use any of the file below)
1) Roto-JME-FmtIntSD-v2.zip ( http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/archive/)
2) Roto-JME-Upgrade-v4.zip ( http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/)
Why is it not used, i myself is not too sure. For FmtIntSD alot of people is asking which is it to use as there are 2 different version 1 & 2 (i Suppose).
I have used the Version 1, as the time posted in the FTP link seem to be later than Version 2.
Also as thread http://forum.xda-developers.com/showthread.php?t=895827 shows in the screenshot, under tab CSC: Addon-JME-Hidden.Tar, this file is missing plus confirmation from the thread saying that it will fine without it.
Once downloaded, it is time to get to business =)
Steps i took:
1) Startup Odin
2) Connect Galaxy Tab to Kies make sure Kies is able to connect to the device and is able to Sync with device (Toggle with the USB Debugging option Either On or OFF) *My kies is never turn off from the start Rooting to Flashing* i think in order for Odin to work properly, Kies must be able to detect the device is been plugged in. (Just my Thought)
3) At this point of time Odin will also detect the device been plugged in as show in the screenshot provided in thread 895827. The yellow box will appear stating COM10 or 11 or 12 (DOesn't matter what com Number)..... Left hand bottom of ordin will also show Added!
Checked Make sure and double checked.... Yeah the next part!!!
4) Unplugged my phone from the USB
5) Off my phone
5) On my phone to get to the downloading mode (Hold Power Button and Volume Down Button)
6) Checked my Odin, Bottom left log shows REMOVED!
Hell Ya exactly the same as the sceenshot.....
7) Plugged in my phone with the Downloading screen....
8) Waited.... Waited..... 5 min pass..... Windows 7 is still searching for "Gadget Serial Port" Odin didn't detect the device connected.... don't have to worry Windows 7 will eventually find the driver, just got to give it sometime (Just in case you meet with the same problem like i did, Windows 7 took almost 10 min for the device to be ready)
9) Check Odin, Bottom left hand log.... ADDED!
Almost there.....
10) Plant in all the .Tar file as show in screenshot (Thread 895827)
*Please make sure you unzip the .rar file the logo is similar to winrar icon once you unzip. Can get a little messy, what i did was unzip and delete the original zip file that i downloaded. Remember JME-Hidden.Tar is not needed, just leave it blank*
11) Tick the "Re-partition" in Odin
Now you are all ready to start, double check all the setting and click the "Start" in Odin... =)
12) Pray.... Pray... Pray....
Whole process took me about 5 min, Odin will show you the details as it is flashing, Installing and Bla Bla Bla.... Once it is ready, Odin will prompt you either Successful or Failed...
Phone will automatically restart. Just leave it till you see the main screen comes out.
* I Succeed on my first try, so if you fail i guess you got more reading to do than me, but i am sorry that i am unable to help if you fail at this point*
Now then all good, checked my phone all seem well... did a call to my house number, Working....
Now the complication that i faced: My 3G (data Services) is NOT RUNNING!!!!
Did a search on the forum and found a few threads that is helpful:
1) http://forum.xda-developers.com/showthread.php?t=901021
2) http://forum.xda-developers.com/showthread.php?t=845263&highlight=modem.bin&page=3
3) http://forum.xda-developers.com/showthread.php?t=847273&highlight=modem_bell_i9000
* I Have attached the modem.bin that i use to get my 3G working, but before you download the attachment please do a few check as stated below.Things to check if your 3G (Data Service) is not working:
1) APNs setting
Setting>Wireless and Network>Mobile Networks>Access Point Names
2) Select the Access Point Names and see if there is any setting inside.
3) If it shows "No Setting"
4) Tab on the bottom left hand corner of your galaxy tab, "MENU" button beside the "Home" buttom
5) select "Add APN"
6) Use the information below, key in whatever is there. Those that you don't know just leave it blank. (As long as your are in Singapore i believe you know which telco you are with)
StarHub (Singapore)
APN: shwap or shwapint
Leave user/pass blank.
M1 (Singapore)
APN: sunsurf
user: 65 pass:
user123
swirlyMMS :
MMSC and Proxy server settings MMSC : http://mmsgw:8002/
Proxy : 172.16.14.10:8080
MMS-specific APN Settings
APN: miworld
username:65
password:user123
SingTel (Singapore)
APN: internet
Username: 65IDEAS (or blank)
Password: IDEAS (or blank)
Once Key-in "MENU" button again and safe the setting, now go back to your APNs and check to see if you have selected the setting you key-in (Button on the right hand side will be "GREEN"
Now Wait & Pray that the logo "3G" or "H" appear on the top beside your signal strenght bar.
if no launch your dialer (Press Phone) and Dial *#2263# select "automatic" 1st option. (Select it once and exit by pressing "HOME" or "BACK")
Wait & Pray....
I believe this should get it going as under JME-Modem.zip, the modem should already be in.
__________________ I sincerely hope that you do not have to do the step below________________________________________________
If the 3G or H is still not showing after you tried the above step. Download the modem.bin (Attachment in this thread modem_bell_i9000.zip)
Then follow the step below:
1) Unzip the file
2) startup Odin
3) Browse for the Modem.bin, using Odin "Phone" Tab (File you unzip from the attachment downloaded from here)
4) off your phone and boot it up to the "DOWNLOADING SCREEN"
Checklist:
5) Re-partition is NOT tick
6) Odin detect your device
Hit "Start" and wait for your phone to reboot.
*I succeed with this flashing of modem, if you fail all i can say is good luck*
Once your phone is up, check on the APNs setting again (Key-in the details is there is nothing in the list) Check on *#2263# and set it as automatic.
Then End.....
Conclusion:
I use the exact same step for my phone, and get it going. I hope it helps you.
Again i would want to highlight that none of the above is by me, all information can be found in thread posted by other users. Please give thanks to them as they are the one doing the job, taking risk to try ROMs, Root and etc...
=) i hope my thread helps anyone with the same problem as me...
PS: DO NOT HOLD ME RESPONSIBLE IF THE ABOVE GUIDE DOESN"T WORK FOR YOU.

Hi Kay Kiat,
I Seriously don't know. See the steps i posted, i believe it is because i flash a i9000 modem in that is why my baseband is weird. =p
i believe all i need to do is to re-flash the Jme modem in, and it should be right.
But currently at work no time to try. haha
Best Regards

Hi guys, Singapore GT user here also. Looking forward to try out your guide.
EDIT: Just flashed Roto's JME-Full-v4 with repartition. All works fine. No modem flash required.

HCgoh said:
Hi Kay Kiat,
I Seriously don't know. See the steps i posted, i believe it is because i flash a i9000 modem in that is why my baseband is weird. =p
i believe all i need to do is to re-flash the Jme modem in, and it should be right.
But currently at work no time to try. haha
Best Regards
Click to expand...
Click to collapse
hmmm. my 3g/gprs seems okay.. i went from jj1->jm4 via kies then jm4->rotojme via flash.. my baseband is p1000dxjm2 (i believe this is from jm4 as i did not flash modem when i upgraded to rotojme). hmmm.. did u set your apn correctly?

Sg user here as well
Anyone managed to get chinese input up?
Sent from my GT-P1000 using XDA App

junchen said:
Sg user here as well
Anyone managed to get chinese input up?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
are you talking about the keyboard?

Hi,
wanted to share my experience from flashing this Rom.
The way I've done it is download the latest full version find in the ftp site (not the archive) directory and using Odin to fladh my tab. I also downloaded all the other files but did not use them.
Overall, this rom is good. It solved my exchange problem but i've lost a few things as well. There's no more chinese input and i'm no longer able to zoom and pinch on dolphin browser. Does anubody has any solutions to these problems?
Thx.
Sent from my GT-P1000 using XDA App

中文鍵盤及手寫
This is what I've been using in a US T-mobile Tab with Roto-JME & it's working fine! Enjoy
junchen said:
Sg user here as well
Anyone managed to get chinese input up?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse

xenomage said:
i'm no longer able to zoom and pinch on dolphin browser.
Click to expand...
Click to collapse
This was solved in another thread, maybe the Roto-JME one itself. Theres a new version from Dolphin with the fix. You'll find it

xenomage said:
The way I've done it is download the latest full version find in the ftp site (not the archive) directory and using Odin to fladh my tab.
Click to expand...
Click to collapse
The Roto-JME-Full-v4 will format the internal sdcard only if it is corrupted. So you can shorten the steps to just flashing that one firmware. The ones in the archive are there just in case we needed to test something.

APN settings
Hi
Did you guys copy down the APN settings and did you manage to get your MMS working? I only have my 3G working. Was trying out the different settings to get MMS working too.
ps: for chinese input, can just install google pinyin. been using it since Im only android. swype does have chinese input but the one on the tab doesnt have it. I was testing the beta using my hero and i can do chinese input using the swype keyboard. i wonder if there is anyway to update the swype version to the latest one released by them.

Chinese input
xpgroup said:
This is what I've been using in a US T-mobile Tab with Roto-JME & it's working fine! Enjoy
Click to expand...
Click to collapse
Hi,
this may sound kinda dumb but after i download and install the attached APK, nothing happens on the keyboard.
How is it supposed to work?
Thanks.

go to settings > locale and text > enable whatever keyboard you want. then rmb to change your input method whenever u wanna use the new keyboard

xenomage said:
Hi,
this may sound kinda dumb but after i download and install the attached APK, nothing happens on the keyboard.
How is it supposed to work?
Thanks.
Click to expand...
Click to collapse
You'll need to goto Setting-Locale and text, check the Penpower Input Method. After that, at any input screen, press & hold - then select the input method.

xpgroup said:
This is what I've been using in a US T-mobile Tab with Roto-JME & it's working fine! Enjoy
Click to expand...
Click to collapse
Thanks for the file, it works fine. Just the right hand side part of the keyboard is emtpy. I wonder if there is anything to adjust the scale.
Thanks.

[SOLUTION] Missing camera settings restore

To anyone who has problem with settings in the camera (no settings in non english language)
Download the file camerasettingsmanifest.0409.zip form this thread
1. Translate the file camerasettingsmanifest.0409.xml to your language .
2. From this Microsoft table find the code for your language and rename the file by replacing the "0409" with your code
(For Greece the number is "0408")
3. Then add the txt extention to the file and mail it to an account that you can read by your phone.
4. From your phone open the mail and press the attachment to download and pres again to open with Word.
5. In word save the file as camerasettingsmanifest.XXXX.xml.txt and close word
6. Open Touchexplorer and navigate to \My Documents
7. Rename the file camerasettingsmanifest.XXXX.xml.txt to camerasettingsmanifest.XXXX.xml and copy it to \Windows
8. Restart the phone and you are ready..Your camerra settings are there.
Note that where XXXX is the code number of your country

Hmm I write this http://forum.xda-developers.com/showthread.php?t=1216975 about 30 minutes ago.

Budniu said:
Hmm I write this http://forum.xda-developers.com/showthread.php?t=1216975 about 30 minutes ago.
Click to expand...
Click to collapse
LOL....m8
I just finished in my trophy for the greek lang and i post it here ...
Anyway those 2 are kind of different approach for the same solution...
ohh..its the thread that i post the country codes.
Thanks for your effort m8

Thank you colossus_r ..
Works like a charm in my trophy vodafone greece

Yeah.. but how to touchexplorer in Mango? It's already installed from NoDo, but it dont open.

Your phone is re-locked. Read this: http://forum.xda-developers.com/showthread.php?t=1215501

Budniu said:
Your phone is re-locked. Read this: http://forum.xda-developers.com/showthread.php?t=1215501
Click to expand...
Click to collapse
My phone is dev unlocked.. ;/

Hmmm
What message appears when you open Touch Explorer ? Because if about the application uninstalled so as to re-locked device.

Nothing appears.. The opening animation begins and suddenly stops. Just that..

Ok I remember Mango does not allow to use Interop Services ordinary developers and revealed that it was a mistake but I don't know where I read this news Sr

mikeeam said:
Nothing appears.. The opening animation begins and suddenly stops. Just that..
Click to expand...
Click to collapse
Sinse you are dev unlock remove the Touchexplorer from your phone and re-install it .. It was floating arround a 0.9 version that its not working ...
Be certain to get the last version from HERE

Budniu said:
Ok I remember Mango does not allow to use Interop Services ordinary developers and revealed that it was a mistake but I don't know where I read this news Sr
Click to expand...
Click to collapse
colossus_r said:
Sinse you are dev unlock remove the Touchexplorer from your phone and re-install it .. It was floating arround a 0.9 version that its not working ...
Be certain to get the last version from HERE
Click to expand...
Click to collapse
Yeah, Budniu is right, it is indeed the problem with the interop service.
Don't understand why MS have done that.