Mytouch 3G Slide unable to go to bootloader - myTouch 3G Slide Q&A, Help & Troubleshooting

hi all, I'm in a dilemma now. Bought a mytouch 3g slide from ebay, I can't get into bootloader by the VOL - and Power button. Worse is, the phone has a pattern lock and I can't get inside. I think the volume button is not working. Is there anyway I can factory reset the phone w/o using the VOL. button? Is there any method to factory reset probably using the slide-out keypad keys?

ask the seller if they know the pattern to unlock it?

I've successfully run the RUU update on the phone for 2.2.1 but when it boots up the pattern unlock is still there, why isn't it being reset?

Related

Diamond Won't Power On

I tried flashing my Diamond with the XBmod HD ROM and now it won't boot at all. It goes to the Diamond screen and keeps resetting. I tried to get to the bootloader with reset + volume down + center button, but I get nothing. If I broke the bootloader, would Sprint or HTC be able to repair the phone? Or would I get in trouble when they found out it was unlocked?
This ROM: http://forum.xda-developers.com/showthread.php?t=458788
to get to tri-coloured screen, just reset and press the volume down key down.
and then from there flash new rom
mkmatt said:
I tried flashing my Diamond with the XBmod HD ROM and now it won't boot at all. It goes to the Diamond screen and keeps resetting. I tried to get to the bootloader with reset + volume down + center button, but I get nothing. If I broke the bootloader, would Sprint or HTC be able to repair the phone? Or would I get in trouble when they found out it was unlocked?
This ROM: http://forum.xda-developers.com/showthread.php?t=458788
Click to expand...
Click to collapse
I don't think you should be flashing a GSM/WCDMA rom to a CDMA (Sprint) phone. Please someone correct me if I'm wrong, but CDMA diamonds are not compatible with the roms on this board.
R3PUBL1K said:
to get to tri-coloured screen, just reset and press the volume down key down.
Click to expand...
Click to collapse
Doesn't do anything . All I get is the Diamond boot screen and it endlessly resets. If I take this in to see if Sprint can fix it will I lose my contract or anything? I don't even know if flashing is technically legal or not.
Flashing will void your warranty yes, as your changing the bootloader etc, but hopefully they wont notice.
For future reference, read all the guides to ensure you have the correct region rom.
mkmatt said:
Doesn't do anything . All I get is the Diamond boot screen and it endlessly resets. If I take this in to see if Sprint can fix it will I lose my contract or anything? I don't even know if flashing is technically legal or not.
Click to expand...
Click to collapse
Do I need to mention you need to keep the key pressed down? the boot loader (tri-coloured screen should appear in a few seconds.
How long have you had the phone?

Phone Freezing at phone lock - help

Hi,
I have Touch Pro2 on Vodaphone with the stock rom and today when i power on the phone it goes to the enter phone lock as normal but when i press the unlock key after entering the code nothing happens.
Is there a safe boot or anyway to get into the phone without doing a hard reset?
Thanks
Jason

ATT TILT 2 owned since released stuck in Boot Screen

I have a Stock TILT 2 (TP 2) never flashed running basic programs Mobile Shell never had any issues with it, haven't installed new software in a few weeks , but I soft resetted it this morning and it keeps getting stuck in the boot screen. when first turned on it will run through boot screen then load screen for a millisecond then back to boot screen and never advances again , I've tried battery out sim card out Sd card out everything, even tried hard reset , but wont allow me to hard reset with front buttons and power, is there another way to hard reset , is it possible my phone just bricked for no reason ? thanks for any help ?
have you tried to do a hard reset via the pc? the original rom is on the htc website so you can try useing the exe file there. there is also an updated rom you can try to flash there. hope that helps
You might try sending it to the bootloader screen and reflashing. I don't know if it will work, but I thought it might be worth the effort.
I did notice that HTC removed the original shipped ROM for the Tilt2. I'm sure it is floating around here somewhere. If not, I have it and can send it to you when I get home.
Thanks I have original rom and just released wont work.
dod you see anythign on teh screen? if you do, then hard reset may fix it.
Power off your phone (or take teh battery out). Then press and hold teh call and hang up button while press teh power button. it will enter the hard reset mode. (remember hard reset will erase all the info on the phone and rever tot the stock setting).
jcterry said:
I did notice that HTC removed the original shipped ROM for the Tilt2.
Click to expand...
Click to collapse
wow, thank god i dl'd it when i dl'd the updated rom... and they still have the image of the old rom right beside it... lol
as for op, you can try to enter the bootloader with the following steps
Remove the back cover from the phone.
Hold the Volume Down button.
Use the stylus to press the reset hole.
Or if the device was powered off, press the power button whilst holding down the Volume Down button.
and try to flash from there
hope that helps again

[q] need help

I bought the kids A100's last year for Christmas. I ended up un locking the bootloader because the ICS update was WAY too slow for my liking. Two weeks ago my sons decides that the unlock pattern is not going to work. You can get the screen to respond in a couple of spots and then go from there but the lines are jittery. I figure that it might need to have a hardware reset. Do that and get a screen with the bootloader info instead of erasing cache..
Find the sd card I had all the info on and tried to do a master rest. NO go. Brings me back to ICS and his lock pattern. I cannot remember how I unlocked the bootloader, did not add it to my favorites or anything else. Now I am stuck. If I am looking at this right the bootloader is unlocked and needs to be locked before I can do a recovery? Is that correct and how do I get that done and do a factory hardware reset?
Worried that if I call ACER with this I will void his warranty.
Power off, then hold power + furthest from the lock switch, press and hold power then toggle the lock switch a few times when the screen turns on to reset. It didn't reset if there is still a lock screen there.
Edit: forgot to mention, holding volume - while powering on will boot into recovery which if its twrp or cwm you can factory reset there, install a new ROM etc.
Tapatalked from my Nexus 7 - Kuroikaze AOSP
pio_masaki said:
Power off, then hold power + furthest from the lock switch, press and hold power then toggle the lock switch a few times when the screen turns on to reset. It didn't reset if there is still a lock screen there.
Edit: forgot to mention, holding volume - while powering on will boot into recovery which if its twrp or cwm you can factory reset there, install a new ROM etc.
Tapatalked from my Nexus 7 - Kuroikaze AOSP
Click to expand...
Click to collapse
Awww. ****. You beat me to it.
I'm trying to help!
G2x-temasek CM7 build135.3 w/faux 054 kernel
Stang951 said:
I bought the kids A100's last year for Christmas. I ended up un locking the bootloader because the ICS update was WAY too slow for my liking. Two weeks ago my sons decides that the unlock pattern is not going to work. You can get the screen to respond in a couple of spots and then go from there but the lines are jittery. I figure that it might need to have a hardware reset. Do that and get a screen with the bootloader info instead of erasing cache..
Find the sd card I had all the info on and tried to do a master rest. NO go. Brings me back to ICS and his lock pattern. I cannot remember how I unlocked the bootloader, did not add it to my favorites or anything else. Now I am stuck. If I am looking at this right the bootloader is unlocked and needs to be locked before I can do a recovery? Is that correct and how do I get that done and do a factory hardware reset?
Worried that if I call ACER with this I will void his warranty.
Click to expand...
Click to collapse
You definetly need to find out what you have done. As in if the bootloader is definetly unlocked and if you have a custom recovery. Just because it is not neccesary to do anything (ie: root, unlock or recovery) if you just wanted to flash a leaked ICS or the official.
Like Pio said, if you have a custom recovery, boot to it and factory reset/wipe data from there, or flash another rom/reflash. I'm not sure how the tab will react if you do a stock factory reset with the button sequence when you are rooted, unlocked bootloader, and custom recovery.
If the screen only responds in a few places, and is gittery in others, it could be a problem with the digitizer. Digitzer problems are reletively common on the A100. It would covered under warranty if you still have one. If it turns out nothing fixes it, I would restock it though with this concern. They may ***** if they can see it was flashed, if it was bricked it would be a different story.
I used a post on here to go from HC to ICS. Basically It was rolling the HC back first to get the update to push from Acer. I tried to find the post but am having a hard time finding it, and my dumb ass didn't subscribe to it.
This was about in April of this year.
Now when I try to do a hard reset (power + vol down + switch lock) it goes to a black screen with USB bootloader info in the top right corner (near the vol switch). I don't have it with me so I cant tell you right now exactly what it says.
I would have posted sooner, but didn't get emails that there were responses.
Thanks for everyone trying to help. I will try to get back on this this afternoon.
Stang951 said:
I used a post on here to go from HC to ICS. Basically It was rolling the HC back first to get the update to push from Acer. I tried to find the post but am having a hard time finding it, and my dumb ass didn't subscribe to it.
This was about in April of this year.
Now when I try to do a hard reset (power + vol down + switch lock) it goes to a black screen with USB bootloader info in the top right corner (near the vol switch). I don't have it with me so I cant tell you right now exactly what it says.
I would have posted sooner, but didn't get emails that there were responses.
Thanks for everyone trying to help. I will try to get back on this this afternoon.
Click to expand...
Click to collapse
I take it you did the process of going back to HC already and now you can't boot? If its saying its boot loader info in the right corner then its certainly not an ICS boot loader, thats in the upper left corner. It also says ICS in it. Let us know what its actually saying when you boot and we can go from there.
Tapatalked from my Nexus 7 - Kuroikaze AOSP
I will. I also turned on the email instant notification that I know that there are responses. Can't believe that I didn't do that before.
OK top left of the screen where the volume button reads:
Bootloader v0.03.13-ics: Starting Fastboot USB download protocol
This time I was able to do the erase user data. Got to the Welcome screen with the language and Country. Cant get the screen to respond.I am guessing at this point that the screen is shot and needs to be replaced (under warranty) however I need to make sure that this is set to Factory specs so that I don't have to worry about voiding the warranty.
Stang951 said:
OK top left of the screen where the volume button reads:
Bootloader v0.03.13-ics: Starting Fastboot USB download protocol
This time I was able to do the erase user data. Got to the Welcome screen with the language and Country. Cant get the screen to respond.I am guessing at this point that the screen is shot and needs to be replaced (under warranty) however I need to make sure that this is set to Factory specs so that I don't have to worry about voiding the warranty.
Click to expand...
Click to collapse
It sounds stock to me. From what you have said, I think all you did was revert back to a HC version to get the ICS update ( which some did bck when ics came out if their version wasnt getting the update). If you did this a few months ago, you are just running a stock ICS version.
If that is the case is something missing from the ROM that I cannot get it to reconfigure everything automatically? I thought that it should go directly to the recovery information and reflash the entire tablet (may have the terminology screwed up).
Stang951 said:
If that is the case is something missing from the ROM that I cannot get it to reconfigure everything automatically? I thought that it should go directly to the recovery information and reflash the entire tablet (may have the terminology screwed up).
Click to expand...
Click to collapse
If your talking about Google's sync. If you have it turned on and sync'ed prior to a factory reset, and turned on after. It will sync some stuff, it may restore your desktop wallpaper, contacts, WiFi info and some apps. But it will not restore it perfectly. Either way if your screen is still messed up, I think your OK to warranty it. IMO. Verified if your bootloader is locked, and under settings > about tablet, you are running ICS version 4.0.3 with a stock Acer build number.
I cant get there though. The screen will not respobd to input. I was going to try a bt mouse and keyboard but not having screen inputs puts a damper on that.
And about reconfiguring I was refering to the os and stock software not yhe stuff from play.
Sent from my SGH-T999 using Tapatalk 2
Ah I think you mean a factory reset. It doesn't flash anything, it erases /cache and /data (not /data/media but that's another story) and let's the system purge any settings apps or data causing issues.
The system itself is left untouched, if its rooted it stays rooted, if something is corrupted or damaged or missing, it stays that way through a reset.
To replace the system itself you'll need to attempt to flash a stock ROM zip named update.zip on the root of your external SD card and powering on holding the volume - key closest to the lock switch.
Sent from my Galaxy Nexus using Tapatalk 2

Forgot pattern and Gmail

Hi there guys!
I have a friend who had forgotten his pattern and Gmail account on the m8 and now we can't unlock it
We've tried to make it wrong 10 hoping for a reset as I saw on some websites
And tried to enter the recovery no luck as fastboot is on
Tried adb but he never turned it on
He would do anything to unlock it
From flashing a new firmware to unlocking the bootloader anything for a working device
Actuality I am a Sony user and I am a noob Inn htc stuff
So a helping hand is needed
Bootloader is always accessible, doesn't matter if the "Fast boot" power option is on or not:
Hold power and volume up for several seconds. This will force a reboot. The moment the screen goes dark (but before the white boot screen) release vol up, and start pressing vol down. Don't let go until the white bootloader screen appears.
Or you friend can just go to Gmail on a computer and retrieve their password.
John98Zakaria said:
Hi there guys!
I have a friend who had forgotten his pattern and Gmail account on the m8 and now we can't unlock it
We've tried to make it wrong 10 hoping for a reset as I saw on some websites
And tried to enter the recovery no luck as fastboot is on
Tried adb but he never turned it on
He would do anything to unlock it
From flashing a new firmware to unlocking the bootloader anything for a working device
Actuality I am a Sony user and I am a noob Inn htc stuff
So a helping hand is needed
Click to expand...
Click to collapse
Hard reset using key combo. But it will wipe the data from the phone.
Then after reflashing make a nandroid backup!
redpoint73 said:
Bootloader is always accessible, doesn't matter if the "Fast boot" power option is on or not:
Hold power and volume up for several seconds. This will force a reboot. The moment the screen goes dark (but before the white boot screen) release vol up, and start pressing vol down. Don't let go until the white bootloader screen appears.
Or you friend can just go to Gmail on a computer and retrieve their password.
Click to expand...
Click to collapse
Thank You guys It worked after some painful attempts

Categories

Resources