Hi
I have MS2Gingerr Beta2 installed and want to install MotoGinger 2.3.4 Teaser Version,
I need to downgrade to 2.2.2 or just wipe in CWM and Stock is enough?
Wipe, restore the nandroid, flash fixrd sbf.
Done
Sent from my Defy using Tapatalk.
Hi, I'm newbie, I have installed MS2 Ginger for my Defy
for my view, It's so cool but after I installed the others App, such as Motonav
Camera and cemcorder went to dead
I try to remove Motonav, but Camera did not work
Any one help??
Thanks
Related
Hello
I finally took the jump into trying the 4.1 beta of CM7 today, but am having problems with my camera.
I decided to downgrade, to 2.21 which was my original firmware using RSD and although the flash works, and the phone reboots it gets stuck at the Motorola Blur logo and won't boot.
I suspect I cannot go back to 2.21.
Can anyone tell me if it's possible to go back to 2.21 or if not, what is the earliest UK version of software I can restore to using RSD?
Thanks
Glen
I'm not sure on the lowest, but I would reflash the .sbf file posted in the tutorial in this section
There's been an update released today so It's Beta 5.
My camera, video camera, and play back is working fine now!
Everyone on cm7 should have flashed Nordic then put cm7
Sent from my MB525 cm7 beta 5
I have the same problem, tried to install cm7 from T-Mo rom and now it keeps rebooting, I did backup and everything before but cant stop it, any help please?!
drwario said:
Everyone on cm7 should have flashed Nordic then put cm7
Sent from my MB525 cm7 beta 5
Click to expand...
Click to collapse
I did that and got the bootloop problem. So Nordic not always work. Then i tried to flash several sbf and finally saved my mobile flashing Korean 3.4-74 Fixed SBF (http://defy-sbf.4shared.com)
then i rooted and installed without any problem cm7 beta 4
Well I've now got CM7 working fine, but would still like to know what stock ROM I can go back to.
Any ideas?
Hi guys,
i'm reading everthing I find since this morning trying to find out exactly what I have to do in order to install CM7 or CM9.
I have a green lence Defy with 2.1 (2.51.1).
I have rooted my phone with SuperOneClick and then
I installed 2ndInit Recovery Installer v2.0 (http://forum.xda-developers.com/showthread.php?t=1032212).
Now, I would like to install CM7 but it seems that I should first install a 2.2 ROM before. Is it still the case today or can I immediatly install a CM7 ROM ?
Is it possible to use the dual boot tool with Android 2.1 ? So that I could install CM7 as virtual system and keep my sms, contacts and apps on my real system ?
Should I use RSD Lite or can I use the bootmenu to install CM7 ?
I'm lost so your help is really wlecome.
Thank you all for your help !
Sorgue311 said:
Hi guys,
i'm reading everthing I find since this morning trying to find out exactly what I have to do in order to install CM7 or CM9.
I have a green lence Defy with 2.1 (2.51.1).
I have rooted my phone with SuperOneClick and then
I installed 2ndInit Recovery Installer v2.0 (http://forum.xda-developers.com/showthread.php?t=1032212).
Now, I would like to install CM7 but it seems that I should first install a 2.2 ROM before. Is it still the case today or can I immediatly install a CM7 ROM ?
Is it possible to use the dual boot tool with Android 2.1 ? So that I could install CM7 as virtual system and keep my sms, contacts and apps on my real system ?
Should I use RSD Lite or can I use the bootmenu to install CM7 ?
I'm lost so your help is really wlecome.
Thank you all for your help !
Click to expand...
Click to collapse
Its highly recommended that u install a 2.2 rom first....u should use the custom recovery to install cm7
And I really don't know about dual boot with 2.1 so sorry I can't help u with that
Sent from my MB525 using xda premium
Sorgue311 said:
Hi guys,
i'm reading everthing I find since this morning trying to find out exactly what I have to do in order to install CM7 or CM9.
I have a green lence Defy with 2.1 (2.51.1).
I have rooted my phone with SuperOneClick and then
I installed 2ndInit Recovery Installer v2.0 (http://forum.xda-developers.com/showthread.php?t=1032212).
Now, I would like to install CM7 but it seems that I should first install a 2.2 ROM before. Is it still the case today or can I immediatly install a CM7 ROM ?
Is it possible to use the dual boot tool with Android 2.1 ? So that I could install CM7 as virtual system and keep my sms, contacts and apps on my real system ?
Should I use RSD Lite or can I use the bootmenu to install CM7 ?
I'm lost so your help is really wlecome.
Thank you all for your help !
Click to expand...
Click to collapse
You can't use Dualboot with Eclair 2.51-1. Try to save your Apps with Titanium Backup, Appmonster or else. Your contacts should be saved if you use Gmail. Otherwise try My Phone Explorer as example. So your SMS should be saved this way too. After that flash Froyo 2.2 using RSD Lite.
Root Froyo with Gingerbreak or Superoneclick and install SndInit again. You can now install CM7 using Recovery.
Sent from my MB526 (CM9) using xda premium
OK thank you guys !
I had a trouble with my old CM7 after try to install a new BOOTLOADER, as I explain in this post
Now I follow the instructions in this post and I have a 4.5.1-134-DFP-132-Android 2.3.6, and I wans't able to downgrade. I flashed various Full SBF, some worked some not.
I was trying to install a CM rom but I can't, I even don't know which one I have to chose.
Can some one give me a link with the one I must use?
I got the rom rooted with SuperOneclick and sndInit instaled the 1.0.7 BL instaled.
Thanks
I wonder... what is the puprose of installing updated kernel and bootloader? What did it give to you???
I guess nothing good, in my case now I'm locked with a ROM I dislike, full BLUR and battery drain... :_(
LLKS said:
I had a trouble with my old CM7 after try to install a new BOOTLOADER, as I explain in this post
Now I follow the instructions in this post and I have a 4.5.1-134-DFP-132-Android 2.3.6, and I wans't able to downgrade. I flashed various Full SBF, some worked some not.
I was trying to install a CM rom but I can't, I even don't know which one I have to chose.
Can some one give me a link with the one I must use?
I got the rom rooted with SuperOneclick and sndInit instaled the 1.0.7 BL instaled.
Thanks
Click to expand...
Click to collapse
well grosss! the sbf you ve flashed. its mentioned above there that no downgrade to GB 2.3.4. and can't even flash cm7. so betta not to flash those. try flashing MS2Ginger By Walter79 or any defy+ Rom or any rom of spears DHT. this would definately help you. after that you could downgrade .but never flash the full sbf as you hae done
Whenever you install a new ROM or zip file, do a wipe data / cache before and after, to be sure.
If you do not make any new SBF will not work.
To do this, turn on the device with the vol-button pressed until the icon appears Custon recovery. After that press Vol + (or both together), select wipe data / factory and then cache (go to Vol-/ + and OK button to power on / off).
If the android does not start, reinstall the SBF and do the procedure again.
Hi,
After "bricking" my new Defy, i installed the ROM of section "
Installed full Gingerbread SBF and can’t go back to another rom" of All-in-One Defy Beginners Guide.
Its works and after i install the firmware, it stops working. And after that, i can't install any SBF, i tried Froyo CEE2.2.2(i want to install CM7 or CM9), but nothing.
Then i have to start all over again(go to RSD Lite, flash with JORDN_U3_97.21.51,
install 2init, reboot wipe the data/cache, the install other SBF). But it doesnt work with others SBF i tried. Between those i tried, JORDN_U3_97.21.51 is the only one that worked, and i don't like it =(
Can somebody help me?
Please be more clear. You had a defy with froyo? You flashed a full gingerbread 2.3.6 sbf? What sbf was that? You then flashed a froyo sbf with bootloader 5? And now you want to flash back your old froyo?
What defy do you have? Green or red lens? You can find a guide about that in the forums.
Sent from my MB526 using xda premium (app needs update!)
Hi. All was working well when I was running Quarx's version of CM10 on my Green Lens Defy. I could update to each new update CM10 ROM by clearing the data and cache then flashing the ROM and GApps. After that, I wiped the dalvik cache and reboot. Note my Defy is using a Froyo kernel.
Then I decided to try out Codename Android JB Beta and I did what I normally did with the ROM and then GApps. I ended up stuck in a bootloop. No problem I thought. I'd just reflash Quarx's own version of CM10 after wiping data and cache. I got stuck in a bootloop again. Odd. I tried it with older versions of Quarx's CM10 and they result in me getting stuck in a bootloop as well. So I flashed the US T-Mobile SPF for the Defy using RSD Lite then I logged in to BLur and such as that is needed to access the homescreen where I then turned on USB debugging. I then plugged in my phone into my computer to use SuperOneClick Root to root my device. It said my device was already rooted though I don't think that should happen since I flashed a stock 2.1 SPF. Well I rebooted and installed the 2ndinit apk then installed 2ndinit using the app. I think it said that 2ndinit was already installed. But if my memory is wrong in this case, I then installed 2ndinit and rebooted my Defy but I never got a blue LED.
Then I did the same steps as I did previously over and over again with variations to try to get it to work.
Can someone help?
I caution anyone who may attempt to install Codename Android JB Beta from CM10.
On another matter, downloading an OTA update then rebooting when pressing "install now" brings me to the triangle with exclamation screen and gets stuck there.
Have you done a fullwhipe in the Motorola Recovery before flashing the SBF??(usually you would get a bootloop without fullwhiping but maybe the solution is that easy )
And why did you flash a 2.1 SBF you should maybe try some other SBFs like the Froyo SBFs for your Country
Steveletack said:
Have you done a fullwhipe in the Motorola Recovery before flashing the SBF??(usually you would get a bootloop without fullwhiping but maybe the solution is that easy )
And why did you flash a 2.1 SBF you should maybe try some other SBFs like the Froyo SBFs for your Country
Click to expand...
Click to collapse
Oh a full wipe in stokc recovery is needed? I'll try it.
Can you suggest a good SBF for a US Green Lens Defy if you know any?
Is it fine if I use the 3.4.2-179 CEE Deblur SBF as recommended by Quarz for a base then root, install 2ndinit. and flash CM10 from Clockwork Mod Recovery?
j814wong said:
Is it fine if I use the 3.4.2-179 CEE Deblur SBF as recommended by Quarz for a base then root, install 2ndinit. and flash CM10 from Clockwork Mod Recovery?
Click to expand...
Click to collapse
Yep fine for using that one but you should definitely check out the begginers guide for sbf rooting ect as you've been having trouble with this for the last few days now and I'd really like to see get this sorted once and for all
Sent from my MB525 using xda app-developers app
after you instaled 2ndinit
are you opend it and appli the recovery?
if you dont applied the recovery you will not find the led blue and the CWM