Develop Bugs

[Q] SGS2 Odin Question

During an attempt to flash a rom using odin to my rooted sgs2, odin crashed and closed before it was finished. I tried restarting odin, wouldnt see phone.
Removed battery from phone, reconnected to odin and tried using the one click odin to reflash back to stock. Also tried using odin with other roms to flash back.
Heres my problem.
When i power on the phone, it says the Galazy S2 i9100 for a few seconds, then just turns off.
I can open odin, or odin one click, plug in phone, shows me yellow w/com and added. I click start, it gets to Setupconnection and then just sits there.
I have tried
- Different roms and both one click and normal odin.
- Different usb cables
- Different usb ports
- Multiple computers
Is there any way to get past this? God i hope someone can either point me somewhere or help me out.

Reinstall Samsung Kies to your laptop or pc so the proper drivers are re-installed. Once complete with that install, plug your phone into the pc and put the phone into USB mode, hopefully the pc will recognize your phone and install the NEW DEVICE drivers after a few moments. Depending on your pc, sometimes it takes many seconds for your pc to recognize and bring up the drop down menu for the newly recognized drive. BE PATIENT. If the pc does recognize your phone, start Odin again. If Odin also see's your phone, which it now should, you should see a COM:# connection in the ID:COM box of Odin. Doesn't matter what COM # is, as long as something is there. You can now use Odin because it see's your phone. Once you start Odin flashing, make sure not to disconnect anything until you see the upper left GREEN PASS box in Odin. Once its GREEN with PASS in that box, you're finished. You can d/c your phone from the pc and the phone is probably rebooting anyway.
OFC, if your phone will not stay power'd up, all of the above is for nought. Wish I could be more helpful.
Keep in mind that I do not intend to insult intelligence but everyone has limits in experience and I always try to explain in the simplest way I can. No disrespect intended.
Good Luck!
R

Thanks for the reply,
How am i supposed to put the phone in usb mode when i cant boot it?

That does create a problem, I would do some research on a USB Jig for your phone. Search at eBay for: Samsung Galaxy S2 Epic 4G Touch USB Jig
I'm not sure if this will help a phone that will not power up but it does have its uses for Root'd phone especially using Odin to flash and to remover that nasty YELLOW Triangle that comes from ROOT ROMS that are unsign'd.
Wish I could help you further.
R

Scribes said:
Thanks for the reply,
How am i supposed to put the phone in usb mode when i cant boot it?
Click to expand...
Click to collapse
Try to put in download mode if not try a jig ... If that fails it's sprint or jtag
Sent from my SPH-D710 using xda premium

It does power on, basically shows the sgs boot logo (black backgroud w/ white text) then goes dark, but its actually still on cause it gets hot.
I can get it into download mode and i can get it into the android recovery.
Theres gotta be a way to recover with an update.zip from the android recovery via the sd card........

There you go, you have two of us saying about the same thing. Just make sure you get the correct JIG if you go that route. It's like $2.00 and arrives from China in like 2 weeks.
http://www.ebay.com/sch/i.html?_fro...e+for+Samsung+Galaxy+S2/i9100/i9000/T959/i897
---------- Post added at 09:41 AM ---------- Previous post was at 09:37 AM ----------
humm, an idling phone shouldn't get hot. That tells me you've got something going on. I think you just progress'd passed my pay grade my friend.

Heres another thing, as i mentioned in my first post.
The boot logo says i-9100....
and this is a sprint phone, isnt it a d710?
So im gussing in my late night haze i screwed myself by loading an i9100 rom/bootloader/whatever the hell that is.

Samsung calls it: I9100
Sprint calls it: SPH710
We call it: Epic 4G Touch

I see, so thats not the problem?
Im just gonna keep posting here while i mess with this incase i trigger someones mind for a fix.
(picture was here apparently i cannot post an external link yet. Was just a picture of device manager and odin sitting at SetupConnection)
The only way to get odin to see my phone, is if i open odin, put phone in download mode, plug phone in, then uninstall the com port via device manager, reinstall it. When i rescan for hardware changes, odin goes yellow as seen in the picture, i click start, then it sits at SetupConnection all day, so im guessing its losing the connection after it finds it.
My only solution here is via usb card i think, but i cant find a signed package. Cant someone just pull theirs from a stock phone? Why wouldnt that work?

Well, if you can get Odin to work, unroot to full stock with this:
http://www.megaupload.com/?d=ISD9AOP0

Right, getting odin to work is the real problem though i think.
Stuck at SetupConnection forever
This is super frustrating... going without a phone is impossible, work emails, texts, calls, ahhhh

..and there is no way to completely reload the entire phone using an update.zip off the sd card, one that is signed?
I know i used to do that on my droid, and all though i know this is a totally different game, i still have android recovery, one would think it would be possible if the package was signed. unsigned ones just fail, but at least i can attempt to run them from there.
If someone can find a way to do that, and it works for my phone, i will paypal $50

Let me see what I can find for ya....
I have searched two different Forums for a flashable unroot to stock with NO luck. Everything I found requires Odin. Sorry Buddy.

Correct me if I'm wrong but isn't the i-9100 a whole different phone??? Looking at the specs and release date I would believe so. Sounds like he did an ics update for a phone that wasn't the Sph-d710 or something..
http://www.gsmarena.com/samsung_i9100_galaxy_s_ii-3621.php
Sent from my SPH-D710 using XDA App

not sure, all I know it by is: SPH 710
~ via My Epic 4G Touch & XDA'a app ~

Have you tried just flashing a kernel only in Odin
Sent from my SPH-D710 using xda premium

You tried flashing ICS on your phone, didn't you? B/C I'm pretty sure that's why you are seeing I9100 while booting up. If that is the case, do a search here as there are multiple people who have done this, and none of them have been able to fix it.
Sorry, your only solution is exchange at Sprint if you can, or JTAG.

help
beezar said:
You tried flashing ICS on your phone, didn't you? B/C I'm pretty sure that's why you are seeing I9100 while booting up. If that is the case, do a search here as there are multiple people who have done this, and none of them have been able to fix it.
Sorry, your only solution is exchange at Sprint if you can, or JTAG.
Click to expand...
Click to collapse
does not mean he flashed ICS when you odin a kernel that is not signed ie with CWM you will get yellow triangle and it will say i9100 too ..... so does not mean he flashed ics ... if odin sees the phone on a com port he probably didnt .... try flashing a working kernel from our phone

I did attempt to flash ICS. I could find where i got it, but it was supposedly for the Epic 4G touch, aka sprint sgs2 variant.
I am a network and systems admin, i should have known better. I jumped the gun and got ahead of myself. I have rooted and put roms on the og droid, and the droid x, samsung is a different beast all together.
However, i went in to sprint the day after i did this, they looked at it, no insurance, no replacement warranty, they didnt ask me anything, and THEY determined it was a factory defect , they had me sign a sheet that said "After researching found phone to be a factory defect and the solution from SPRINT is to replace the phone. $37.41, and 22 hours later i had a brand new SGS2 in my hand.
They hadnt sent my phone in yet. I honestly am not sure if they are going to be able to tell if i did anything to it or not, i may have just hosed the bootloader enough that odin wont connect, so they probably will have to use something like jtag in house to reflash it, or replace the chip or whatever they do. Even so, if they do see that i was messing with it, and say it voided my warranty, i have a signed receipt showing my payment and agreeing to pay for the replacement at $37.41, and that THEY determined the flaw. My brother in law is a lawyer, so i asked him, because i was curious if they would look at my phone at the service center or hub or whatever, and determine it was my fault. He assured me they could try, but it would all fall back to the employee who had me sign the agreement, so even if they dont like what i did, they are beyond doing anything about it.
I doubt they will even notice it, im sure they will try to boot it, then just flash it or however they do it.
Either way, im not worried anymore.
So...someone wanna point my idiot ass to an actual good rom, with a good method, that works for my phone? lol. I cant stand touchwiz, huge icons and cant replace them ....wtf is that all about.

Optimus S LS670 - please stop me on my el bricko

just bought it for $30. it worked great. so i download rom manager and flash the clockwork recovery because i am really dumb.
i think it still gets into software update or emergency mode, the screen is blank but the buttons light up and in KD500 i CAN flash a bin file to 95% but then it cuts out saying phone disconnected, as the phone reboots it just hangs on LG logo.
ive tried lgpnst but it claims at 0% MASTERBIN DOWNLOAD "NUMBER OF BAD BLOCKS EXCEED LIMIT. PLEASE REPLACE FLASH"
i have spent 16 hours now trying to fix a $30 phone. please stop me guys. either give me a solution or tell me to shove this up my... ahem nevermind

It sounds like there's something wrong with the flash memory in the phone. If that's the case then it's not really your fault, it would've gone anyway. Have you tried booting into recovery and flashing something?
By the way, you posted in the wrong forum, this belongs in Q&A

bluespoon4 said:
It sounds like there's something wrong with the flash memory in the phone. If that's the case then it's not really your fault, it would've gone anyway. Have you tried booting into recovery and flashing something?
Click to expand...
Click to collapse
it wont go into recovery, it just pops up the LG logo and sits there
at first, right after i flashed the bad recovery, i could do the emergency boot sequence (hold backspace and vol down, insert usb). up would pop the SW update mode.
so i did that, and tried the stock LG updater, but it wouldnt keep talking. so i tried the KD500 method, and it appreared to work but thats where im at now. even if i boot into SW update mode, its just a blank screen now, but it will still connect to KD500 and seemingly flash a bin just fine. however when the phone reboots at the end it just lights up the dumb lg logo and sits there.
its just frustrating. i know its not the end of the world, just man. ugh maybe its the wrong cabs? ive tried LS670ZVC_11.SC_11.P60674.cab and such... 75, 70...they all do the same thing

I'm not sure about the KD500, so you may have already done this, but have you tried what is says here? http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=30798348

bluespoon4 said:
I'm not sure about the KD500, so you may have already done this, but have you tried what is says here? http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=30798348
Click to expand...
Click to collapse
thats a wrong link. it just links to a reply for this thread

oh, sorry, I have no idea how that happened, I meant this one. http://forum.xda-developers.com/showthread.php?t=883314

yeah, and it seems i can get that mode to work, however i do not believe i have the right kdz.
thing is, when i try to follow the links to download the original firmware from lg, i cant get anywhere....
ill keep trying. i really think if i just had the right kdz it will work

AAAAAAAAAnnnnnnnnnnnd thats a wrap.
i finally found the right cab i think. i used an LG firmware update app found here on xda.
but i guess the firmware gods did not want this phone alive. during the update, i left for the store. came back, and my laptop wasnt charging, sending it to sleep during the update.
total brick now. no emergency mode. no lg logo. just buttons light up thats it. no communication with the pc at all.
its dead. rip little optimus.
**Update. Just bought a Sanyo Zio for $19.98 shipped off the bay. lets see how fast i can screw this one up!

ha! trying to get my droid x off ics this morning.
BRICKED as well
at least i still got the bootloader!
i forgot then when you do the ota .621 update you NEVER go back. no matter what you flash, youll always be a .621 phone. SO USE .621 CUSTOM ROMS YOU IDIOT
and youre lucky you didnt fry this droid by trying to program it with a dead battery!
sheesh! idiots! (me!) :cyclops:

OK. one last thing.
i had another droid X that has been sitting around for months. i couldnt get it out of bootloader. everything i tried made it worse. it wouldnt even take the linux sbf .621 flash that worked on my other dx's. i really thought it was toast.
but today, i ran across the signed and verified moto stock rom for .621 while i was trying to fix my everyday DX. so i said, "WTF". i flashed the old dx in windows rsd because thats supposedly supposed to flash the radio too.
well, whatever it did, IT WORKED. i am almost in tears right now. this phone is MINT. like brand new, bought it for $40 because the last guy couldnt get it to flash either.
the whole time, it just wanted a verified moto rom!
one more sbf flash to a rooted .621 rom, and bingo. i have a like new fully rooted dx!!!!!!! I cant help but brag! i spent so many hours on this thing!
I could jump through the roof right now!:good::good::good: two droid x phones for less then $80 total! just hours and hours of pulling hair too hahaha

I should have seen this before.. I know a good place for optimus s.
Here

rr0yy said:
I should have seen this before.. I know a good place for optimus s.
Here
Click to expand...
Click to collapse
no i said STOP me!
guess what? i had the battery on an external charger the other day. one last time, i put it in the phone and hooked it up to my laptop. BUH BUM! it connected!
so i quick tried to flash the verified verizon rom. it seemed to take, but again it does not boot up.
HOWEVER, i do now have the S/W upgrade screen back! i dont think this phone is dead yet! its such a joke to keep trying for a $30 phone, but man it bugs me that a simple software problem is keeping this thing from being at least a good mp3 player!
edit- ive seen most of those links though. my problem is i dont have the stock recovery on this phone, and to flash that you need to adb into it... which i cant! I truly believe if i could find the right KDZ file for my phone it would work! all the links i find are for optimus V's! i have an optimus S, model US670 which is VERY hard to find roms for.
i used the LG update app found on xda here, and it downloads an SBF file. even if i change the extension to KDZ it doesnt work! file extract error every time. i need to find my KDZ for this phone and i just know it will work!

[Q] S3 bricked help please

Hi all
Ok was playing around with the samsung toolkit and somehow managed to brick my phone as it will only go to the boot screen.
I can only get it to go in to the download screen (Vol down, home, power)
Ive tried this
http://forum.xda-developers.com/showthread.php?t=1840030&page=3
but when i try even the first step i left it nearly 30 mins and it dosnt seem to do anything
Any help you could give would help me alot
Thanks

avenger79 said:
Hi all
Ok was playing around with the samsung toolkit and somehow managed to brick my phone as it will only go to the boot screen.
I can only get it to go in to the download screen (Vol down, home, power)
Ive tried this
http://forum.xda-developers.com/showthread.php?t=1840030&page=3
but when i try even the first step i left it nearly 30 mins and it dosnt seem to do anything
Any help you could give would help me alot
Thanks
Click to expand...
Click to collapse
Just keep trying to flash via Odin. I had that happen where it just sits there five times in a row. Just gotta keep trying
Sent from my SGH-T999 using Tapatalk 2

elesbb said:
Just keep trying to flash via Odin. I had that happen where it just sits there five times in a row. Just gotta keep trying
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I must have done it 100 times and always seems to hang never seems to get any further, I've gone straight to the rom too and same thing looks like its doing something but nothing how long does it take?

avenger79 said:
I must have done it 100 times and always seems to hang never seems to get any further, I've gone straight to the rom too and same thing looks like its doing something but nothing how long does it take?
Click to expand...
Click to collapse
Are you using the file that is stated in the post you referenced? Im no unbricking expert but Not sure putting verizon firmware on a tmo phone works very well...
Also I had a problem with Odin awhile back and it turned out to be the cable I was using...
If you can get into download mode and have odin recognize your phone I believe you will be good to go if you put the correct software on your phone...
Think you should try to Odin back to a stock firmware for your phone instead of using some sort of "unbrick" method... use only one from this post
http://forum.xda-developers.com/showthread.php?t=1949687

majic12 said:
Not sure putting verizon firmware on a tmo phone works very well...
Also I had a problem with Odin awhile back and it turned out to be the cable I was using...
Click to expand...
Click to collapse
Agreed on both accounts.
Sent from my SGH-T999 using xda app-developers app

From an Odin guide I read, can't remember the one now. I believe it said to use the cable from the wall charger. Other cables may work, but that is the one that should work for some reason no matter what.
Good Luck.

If nothing else works on it, search for mobiletechvideos.com. I flashed I-9300 ROM onto my T-999 phone. Hard bricked it. I sent it to those guys and within 1 week, phone was back and was like it was before I flashed the wrong ROM. Great service they provide. It was also my only option. ha.

[Q]My phone will not start. Just a black screen.

So I recently rooted my phone with this tutorial:
http://www.youtube.com/watch?v=nkkcCCjeUpI
Everything went great and I was rooted. So next I decided I wanted to flash a rom. So I decided this one:
http://forum.xda-developers.com/showthread.php?t=1817345
I looked over it and followed its instructions. So I flashed it. I also flashed the google apps.
This is where the problems started. I rebooted my phone, and It never would show the boot logo. I kept pulling the battery and it would not start. I thought the battery might be dead so I charged it, and still nothing. I noticed when I plug it into my computer and it makes the little connection noise. (Like my computer is reconising the device) But still nothing on the screen. I tried to connect it to odin and it does not show the device.
So I have looked all over the internet (including these forums) and have found no help. Sounds like I might have bricked my device.
So my last question, If I did indeed brick my device will this fix it? (I mean will it atleast get it into download mode?)
http://www.ebay.com/itm/NEW-Samsung...369526?pt=PDA_Accessories&hash=item3a77c2f8b6
Please let me know if you have any ideas.
Thanks, Griffsbrown

Boot into recovery and restore the nandroid you made before you flashed.

Man sure sounds like most the people having problems are cause they are rooted/modded. Hope its a simple fix for you. GL.

You flashed a rom for a different phone, its dead pretty much. research jtag I read its about 60-100$ read more in the future.
Sent from my SGH-T999 using xda premium

You flashed a ROM for a different phone. That is why you can not boot. Are you able to get into download mode? from the power off state, press and hold the volume down and home bottons and the power button. This should bring you into download mode. IF you can get there then you should be able to recover.

always be careful when flashing roms if you can get into download mode like the above poster said then your lucky and can odin a root66 and you will be back to before you installed the wrong ROM.
If you cant ........... your bricked my friend time to learn a lot more about jtag (which is a lot more difficult than odin READ READ READ
The only thing is people have been installing ATT roms for some reason their phones are not bricking but unless the dev says it works i wont try it.
ONLY USE ROMS FOR YOUR PHONE im really new and one of the first things to know.

Bricked! Search for mobile tech videos jtag fix.
Sent from my SGH-T999 using xda app-developers app

[Q] Samsung t989 Galaxy S II - Bootloop HELP please :(

I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!

still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?

phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.

zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.

If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta

tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?

JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.

sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!

dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know

sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.

JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.

sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.

JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!

sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying: