Related
Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me
hi there
try thees Steps
1. Run the ROM update program on your PC and go through the installation process until your reach the ‘End User Update‘ window. Leave this running.
2. Go to the Temp file in your Documents. This is usually C:\Documents and Settings\username\Local Settings\Temp but it really depends on how you set up Windows.
3. Look for these 2 files, temp.dat (about 60 MB) and USBDLUpdate_Console.exe (about 4 KB) and copy them to your formatted SD Card using a card reader. You might want to copy these files to another location on your PC before copying it to your card reader if there are problems. Also, rename temp.dat to temp.bin before proceeding to the next step.
4. Put this card into your device and put the device into Bootloader mode. This can be done by pressing (and holding) the power button and voice commander key and then soft resetting. When it restarts, you can remove the stylus but keep your hold on the power and voice commander buttons.
5. The installation will proceed but at a slower rate than if you did it on your PC. This is due to the slower transfer rate between the card and device. It might take about 15-30 minutes so it would be best if your device was connected to the mains charger.
6. Installation is complete when you see this message “USB host is not connected yet“. This is your sign to do a soft reset and setup your device as the ROM installation was successful.
***
you may use this rom
http://rapidshare.com/files/314654442/Eten_X610_WWE.7z
just rename temp.dat to temp.bin put in formatted sd card
and go threw steps 4 to 6
any how you are welcome to
http://www.eten-users.eu/index.php?showforum=52
Hello,
I Tried All Ways & Your Roms On Etenusers
But My Boot Loader Shows a White Screen After Using Magic Numbers Method!
What Can I Do?
My Device Is x610 Samir 020 0702
One An Other That: My Booting With All The Roms That I Tested With Memory Card Method Long Only 4-5 Minutes! Isn't It Wrong?
Aha i got it now
Ok i got it now
I understand your problem
you cant do any thing for your device unless you have another Glofiish device (any model)
because your flasher is corrupted
if you find any working Glofiish device (any model) this is how to do it
1- connect the working device to Active Sync
2- download this tool http://rapidshare.com/files/254487467/UnLock_upgrade.rar
3- put one of my roms in the same folder of the tool.
4- open the upgrade.bat
5- flow the installation steps until the device goes to bootloader
6- now disconnect the working device from usb
7- put your device in boot loader mode connect your device to pc
8- push the update button .
and you are done
any how send me your mobile number as PM and i will call you as long as you are
in ksa
Oh A Big Problem!!!!
I'm In Iran & I Think There Are max 10 Glofiish Device In Iran!!!
Some Time My Boot Loader Work But Only With Sd Card
Isn't Any Other Solution?
I have another problem with x610. After hard reseting the phone after I pressed yes on deleting the files, I got myself callibrating the phone but the callibration stucks forever and it does not passes so the phone wont start...
Is there any solution? Please help as after searching I found nothing as a solution so I am asking here.
can I boot somehow from sd card? I mean formatting the phone?
nephew said:
Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me
Click to expand...
Click to collapse
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..
probir_dev said:
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..
Click to expand...
Click to collapse
Hi,
I tried as you said above, when I click YES it showed as bellow
"erase all data and load default ? (Yes)
please wait... "
and nothing had happened and it was showing like that continuously..
What should I do to get back my device?
please help me to sort out this.
thanks in advance..
Dear All,
i installed wrong rom to acer smartphone E101 and its dont work now , its open and show acer logo then restart ...... i tri install correct rom using SD card but the install screen don't appear.
iknow the proceduer to reset or clean boot or install new rom but its dont work too
please help me to solve this problem >>>>>>>
urgent help
please any help
up>>>>>>>>>>>>>>>
ask hdubli
put it in download mode and try the flasher
Sent from my E400 using the XDA mobile application powered by Tapatalk
what is " download mode" ?
NEED HELP WITH hp iPAQ hx2410
i have " HP IPAQ hx2410 " with WM2003 CE 1.10.0 and i upgraded with this window 5.2 it upgraded successfully but i m stuck on the first loading screen. its stuck when loading complete i have tried every thing such as boot-loader thing and also cant downgrade it . . . so kindly plzzz any one tell me how can i go to my initial state on wm2003 ASAP.
[email protected]
same problem here ? the acer logo starts ..
after that the red LED starts blinking ...
no boot-loader
no hard rest
i tried everything..
please anyone can help us ?
My Device: Acer betouch E101
DJ-XMS
www.acer-club.ru/Vosstanovlenie-telefona-posle-neudachnoj-proshivki-t572.html
DJ-XMS said:
same problem here ? the acer logo starts ..
after that the red LED starts blinking ...
no boot-loader
no hard rest
i tried everything..
please anyone can help us ?
My Device: Acer betouch E101
Click to expand...
Click to collapse
I just had the same symptoms with my e100. and i found out that u can force it to boot by pressing volume up + camera with the silence button up. As soon as the version of your ROM appears on the screen (should b about 3~4 sec) release both button to start windows, release volume up to go clean boot, or release the camera button to go flah ROM (in case u want to flash a new ROM from the sd card - must b 256/512mb formated in fat16).
The Problem can be solved just follow the instructions :
1- Press the camera and the restart button with the sound switcher down (silent mode)
2- Your device will boot to the download mode.
3- download the original rom from global-download.acer.com/GDFiles/OS/OS/OS_Acer_2.003.04.EN_WM65_A.zip?acerid=634013918060286729&Step1=Smart%20Handheld&Step2=beTouch%20Series&Step3=E101&OS=M02&LC=en&BC=Acer&SC=EMEA_1
4- unrar the rom and press setup during the setup it will tell that active sync is not connected , ignore the window and go to program files(86x)\EUU you will find a folder called imageupdater copy the folder to use it later.
5- download this tool .mediafire.com/?ubilx69aawdbrnu
6- unrar the downloaded files move imageupdater in (4-) to the same folder
7- Run DownloadForm_2005 ( for win 7 right click run as administrator)
8- Have fun .
hi sir
my acer e101
i ddnt get my bootscreen.....
have any solution plz help me
no sir
in acer it not gatting download
This Link Not Working.
louis0 said:
The Problem can be solved just follow the instructions :
1- Press the camera and the restart button with the sound switcher down (silent mode)
2- Your device will boot to the download mode.
3- download the original rom from global-download.acer.com/GDFiles/OS/OS/OS_Acer_2.003.04.EN_WM65_A.zip?acerid=634013918060286729&Step1=Smart%20Handheld&Step2=beTouch%20Series&Step3=E101&OS=M02&LC=en&BC=Acer&SC=EMEA_1
4- unrar the rom and press setup during the setup it will tell that active sync is not connected , ignore the window and go to program files(86x)\EUU you will find a folder called imageupdater copy the folder to use it later.
5- download this tool .mediafire.com/?ubilx69aawdbrnu
6- unrar the downloaded files move imageupdater in (4-) to the same folder
7- Run DownloadForm_2005 ( for win 7 right click run as administrator)
8- Have fun .
Click to expand...
Click to collapse
PlayGhost2 said:
I just had the same symptoms with my e100. and i found out that u can force it to boot by pressing volume up + camera with the silence button up. As soon as the version of your ROM appears on the screen (should b about 3~4 sec) release both button to start windows, release volume up to go clean boot, or release the camera button to go flah ROM (in case u want to flash a new ROM from the sd card - must b 256/512mb formated in fat16).
Click to expand...
Click to collapse
it worked !!
THankS !!
I AM NOT RESPONSIBLE FOR ANY NEGATIVE IMPACTS OR CONSEQUENCES ON YOUR PHONE IF YOU SO CHOOSE TO USE THIS GUIDE.
I own the ZTE U950 and had realized that there is very little information (in English) on how to do anything beyond stock for this incredible phone. After hours of research and translation I was able to figure out everything needed to get this phone to a "better" state. Since then I - and other XDA members - have been trying to keep the ZTE U950 alive...
ZTE U950 SPECS
NVIDIA TEGRA 3 (1.3MHz)
1GB RAM
4.3" Display (480x800)
5MP Front Camera/0.3MP Back Camera
Android OS 4.0.4
DRIVERS
Here are the "Join Me" drivers so that your PC can recognize the ZTE U950.
KERNEL
Stock - This is the stock kernel's source file.
Custom - This is a custom kernel for stock ROMs that can be OC'd to 2.5GHz.
ROOT
1) Make sure you have USB Debugging Mode and Unknown Sources checked in your phone Settings.
2) Connect your phone to your PC.
3) Download and open Genotools.
4) The program will open, click the 4th tab (last tab on the right).
5) Ensure that your phone is plugged into your PC.
6) Click the 2nd ROOT button.
7) A popup window will appear, press OK.
8) Your phone will then have a popup window, click the "Restore My Data" option.
9) The phone will restart several times, leave it for a few minutes.
10) This is the odd part... The phone will likely not stop restarting, and when you try to click the unlock key for the screen, it will automatically restart. Disconnect the phone. It should continue to restart.
11) Force the phone off.
12) Restart the phone.
13) If you have SuperUser, you are then rooted. If not, repeat these steps.
ROOT - NEW VERSION #1 (UNTESTED!):
1) Download the file here.
2) The instructions read verbatim are, "1 If your phone is not acquired before the ROOT privileges, we choose 1 root [next line] 2 after enter". Which I assume means click root, then enter...
ROOT - NEW VERSION #2 (UNTESTED!):
1) Download the root kit here made for the ZTE U950 (it uses the Chinese recovery), and extract to your desktop.
2) On your phone, go into Settings and enable USB Debugging under Developer options.
3) Connect the phone to your PC (Windows OS should fail to recognize the device).
4) Run either DrvInst_x64.exe or DrvInst_x86.exe. If you are unsure what you have, run both, the wrong one will fail with an error message.
5) After installation, unplug and replug your phone.
6) Go into Device Manager. You should be able to see a "ZTE TD Handset ADB Interface" under the "Android Phone" section. If you don't, reinstall the drivers again.
7). To root, simply run the U950_Root.bat file, and follow the instructions.
RECOVERY (CWM/TWRP)
1) Download the Chinese CWM or English TWRP recovery.img and place it into the root folder of your external SD card.
2) Download a terminal emulator. (If you are unable to download one, use the APP TRICKS described near the bottom to install a terminal emulator onto your phone.)
3) Open the terminal emulator.
4) Type in "su" then hit the return button.
5) Now type in the following:
dd if=/sdcard/recovery.img of=/dev/block/platform/sdhci-tegra.3/by-name/SOS
(and press the return button)
6) There should be a few lines beginning with something like 14052 or 14272, if not, then the above input was not typed correctly. If so, the recovery should now be installed.
GET INTO RECOVERY
1) Turn the phone off.
2) Hold the Power button + Volume Down button. When the ZTE logo comes up, count two seconds and then let go of the buttons.
3) The phone will enter into recovery. Use the Volume rockers for up and down and the power button to choose (if on CWM), or simply touch the buttons (if on TWRP).
4) I will describe the standard processes here if using CWM - the menus are top-to-bottom on the phone, which are written left-to-right here:
The Main Menu:
[*] Reboot system now
[*] Select zip to flash/install
[*] Wipe data
[*] Wipe cache
[*] Backup and restore
[*] Flash memory/Format
[*] Advanced setting
[*] Turn off phone
The Zip Menu:
[*] Install from zip
[*] Install from internal
Wipe Date:
[*] Confirm wipe data
[*] Do not wipe data
Wipe Cache:
[*] Confirm wipe cache
[*] Do not wipe cache
Backup and Restore:
[*] Backup
[*] Restore
ROMS (ALWAYS MAKE A BACKUP BEFORE FLASHING ANY ROMS TO THIS PHONE!)
Factory ROMs (in order of release)
U950V1.0.0B02
U950V1.0.0B14
U950V1.0.0B18
U950V1.0.0B22
U950V1.0.0B04
U950V1.0.0B05
Custom ROMs (in no particular order)
6240-jingjian
MIUI3.3.7
CustomRom-B14
DeodexedMIUI3.3.7
EN&CN-MIUI3.3.7-msdfyc4zwg
MIUI3.2.8-ysdfyc4zwg
Signed-121223-MZECN-CookedROM
SignedROM
V2.0.0-Hiapk-XC-iSignFile
12-21ROM
4.2CameraROM
RandROM
MIUI1220
V2-MaunJ
CM10/.1 - HeatSka Edition
This should be listed under ROMS, but I felt that it needed its own section. Ska and I worked on this for quite some time getting all the kinks worked out. We did not create the original version of this unofficial Cyanogenmod port, but the original had many issues and was not maintained after its initial release. All the major problems have been worked out in our HeatSka edition.
The ROM was initially CM10 (4.1.2), but it has been mixed with files that list it as 4.2.2 (CM10.1) under the information section. In either case, it is Jelly Bean! Aside from the fixes we have implemented, there are also numerous tweaks and mods for UI speed, network speed, battery consumption, app installs, and much more. There is almost no theming, just enough to know that this is our enhanced (and better) variation.
The only known issue that may arise is CPU throttling. We have included an app called, "LGP880 Booster". This app will allow a CPU speed boost when turned on, with a temperature threshold to prevent overheating. If you wish to save battery, only enable this app when playing a game or using CPU-intensive apps.
DOWNLOAD: CM10.1/2 - HeatSka
FLASH A ROM
1) Download a ROM.
2) Place the ROM in the root of the phone's SD card.
3) Enter into recovery.
4) Wipe data.
5) Wipe cache.
NOTE: Wipe data and cache are the Factory Reset button in TWRP.
6) Follow the menus to get to the ROM in the SD card.
7) Click the power button to choose the ZIP if on CWM (or just push the designated button on TWRP).
8) The ROM is being flashed.
9) Follow the left arrow (the last selection) on the menus to get back to the main menu.
10) Choose the first option on the main menu to reboot on CWM (or click Reboot followed by System in TWRP).
NOTE I: The ROM will probably be in Chinese. Find the Settings icon and click it. Go down to the Language & Input setting and click it (there is a capital "A" next to it). Click the top setting and choose the desired language.
NOTE II: There may not be an English keyboard available, so download this 4.2 keyboard ZIP file and flash it in recovery.
INSTALL GOOGLE PLAY
1) Download and install a file explorer like ES Explorer (free) or Root Explorer (paid). (If the phone is unable to download a file explorer, use the APP TRICKS described near the bottom to install one onto the phone.)
2) Download and take the three files from the RAR file for Google Play and place them in a folder on the phone that can easily be reached with a file explorer.
3) Open up a file explorer.
4) Move the three files to the "/System/App" folder on the phone.
5) Give the three files each the same permissions (Read for all three groups, and Write for User).
6) Restart the phone and Google Play should now be installed.
Notes: a) There are cases where two Google Play store icons may appear. They should both work and not cause problems.
b) If the store does not show, redo the process above.
c) This trick does seem to work on other Android devices as I have successfully done this on a Galaxy Note N7000.
INSTALL FACTORY ROM
1) Download a Factory ROM from above and place the "update.zip" file in the root of your external SD card.
2) Go to Settings.
3) Go down to About Phone and click that.
4) Click on System Updates.
5) Remove the check mark.
6) Click OK.
7) The phone should restore to whichever factory update file was used.
APN FIX (MOBILE DATA FIX)
If your mobile data is not working then use this method to fix your APN:
1) Revert to stock ROM (or any custom ROM where mobile data does work).
2) Download and open a file explorer like Root Explorer or ES Explorer.
3) Go to /system/etc
4) Copy "apns-conf.xml".
5) Go to /sdcard/
6) Paste "apns-conf.xml".
7) Flash ROM.
8) Download a file explorer and open it.
9) Copy "apns-conf.xml".
10) Go to /system/etc
11) Paste "apns-conf.xml" (overwriting the existing file).
12) Reboot the phone.
13) Mobile data should now work.
GAME SUPPORT FOR ZTE U950 (WORKS ONLY FOR U950V1.0.0B02)
Note: I have not tested this. Apparently the first firmware version of this phone is not recognized by Google Play for certain Tegra games. If this occurs, try the following method.
1) Make a backup of the System folder. (It is easier to make a Backup of the entire ROM in recovery...)
2) Insert the build.prop file from this file.
3) Clear the Data for Google Play store (Settings > Apps > Google Play > Clear Data).
4) Reboot the phone.
5) When opening Google Play it should make give their agreement again. If it doesn't, then Data has not been cleared.
6) The rows modified in the build prop is as follows:
Desire ro.product.model = X
HTC ro.product.brand =
Desire ro.product.name = X
Desire ro.product.device = X
...
HTC ro.product.manufacturer =
AGAIN, I HAVE NOT TESTED THIS SO USE AT YOUR OWN RISK!
APP SUPPORT FOR ZTE U950
Note: Some apps will throw package errors after downloaded and then will not install. This method will help a lot of these errors from occurring. It doesn't work for all, but it will for some [tested with Dead Trigger 2].
1) Download this file.
2) Use a file explorer like ES Explorer (free) or Root Explorer (paid) and put com.google.android.maps.xml in /system/etc/permissions
3) Put com.google.android.maps.jar in /system/framework
4) Reboot the phone and now apps should install without issue.
DEAD TRIGGER 1
1) Enable graphics details to High in Setup/Others.
2) Exit the game.
3) Use a file explorer like ES Explorer (free) or Root Explorer (paid) and go to /data/data/com.madfingergames.deadtrigger/shared_prefs/
4) Edit the com.madfingergames.deadtrigger.xml file.
5) Change <int name=”UnityGraphicsQuality” value=”1″ /> to <int name=”UnityGraphicsQuality” value=”2″ />
6) Change <int name=”OptionsGraphicDetail” value=”2″ /> to <int name=”OptionsGraphicDetail” value=”3″ />
7) Save the com.madfingergames.deadtrigger.xml file.
8) Remove all write permission on User, Group and Other for the com.madfingergames.deadtrigger.xml file.
9) Delete the com.madfingergames.deadtrigger.xml.bak file.
Note: This technique works on any non-Tegra device.
APP TRICKS
If apps cannot be downloaded normally (from Google Play), this guide will show an alternative method on how to install them:
1) Download the necessary apk file online.
2) Open the 4.2LatinIme.zip with 7zip or WinRAR and delete the keyboard APK (or keep it if not installed yet).
3) While the ZIP is open go into "/Sytem/App" and place in it any APK you want installed.
4) Boot into recovery.
5) Flash the ZIP file.
6) Reboot and the app(s) should be installed.
Note: I have noticed that certain apps do not flash properly so an alternative APK needs to be downloaded. However, once you have the right apps to install Google Play, you should be able to download any apps from the store.
HARDWARE FIXES BY SKA
NOTE: Always work without the battery attached to the phone.
SIM Card No Longer Works
INFO: There is a diode which provides voltage to the SIM card. Somehow it has become loose, which disallows current to the SIM. Thus, the baseband cannot recognize the SIM card any longer.
FIX: The easiest way to fix and check something is to "re-flow" the PCB (printed circuit board). The modem soldering must be re-flowed in order to reconnect the loose diode and re-allow voltage back to the SIM card.
Touchscreen Not Displaying
Open up your phone. If you don't know how, then you won't be able to continue...
There are three connectors on the left soc side. Check the upper connector near the audio jack and try to seat with a pair of tweezers very gently.
There is a white line on every connector - apart from the battery connector - pull up straight. It must be exactly at the of the beginning of the brown clip when pulled downwards.
MISC
I have successfully paired this phone with a PS3 controller using Sixaxis. This is not unique to my phone as I have verified that there is support within the Kernel for this.
It does seem that Wii controller support can be turned on according to the kernel...
There are no known custom kernels for this phone, however, the incomplete Cyanogenmod ROM available does seem to use its own kernel.
The phone is "stuck" on ICS 4.0.4 with almost every ROM. The incomplete Cyanogenmod ROM upgrades the OS to JB 4.1.2.
The phone is known to have heating issues on different (all?) firmware versions. While these do not seem to attribute to hardware failure, it is an annoyance.
Different firmware versions apparently produce varying levels of GPU performance: The best in GPU performance is U950V1.0.0B14, but this build may produce issues in some games. The worst in GPU performance is U950V1.0.0B18, but it is stable. The U950V1.0.0B22 is stable as well but has better GPU performance than B18. I have found no information on how well the first and last firmware versions perform in terms of GPU.
To disconnect the battery connector you need to place a spudger beneath and lift up. It is the same method used for the connectors of fans, temperature sensors, and the battery in a MacBook Pro 2006/7/8.
Thank you for this Tutorial.
Do you know a method to change language in CWM ?
Best regards
cmoegele said:
Thank you for this Tutorial.
Do you know a method to change language in CWM ?
Best regards
Click to expand...
Click to collapse
Unfortunately I haven't found anything that would suggest that you can. The best I could do is have one of my friends tell me what each section states, but that may be a long while from now.
The menus I have figured out and listed are the most necessary. The others are just icing I suppose.
Unable to switch it back on
Hi,
first of all, please excuse me if this is not exactly related to this post, but I see there is not much discussion around this device so I figured this would be an okayish place to ask.
I got my ZTE U950 just today, put my SIM and MicroSD cards in it, turned it on, all OK. I played with it for a while, changed the language into English, tried some apps, deleted lots of default installed Chinese apps (such as Baidu, QQ, Baidu maps, etc).
I run Debian on my machine, so this guide wasn't working for me. However, I tried to run Genotools on Wine and followed the first steps, but no pop-up showed in my phone and I decided that probably Wine wasn't forwarding the USB dev properly. The phone kept on working normally for a while, I even recieved a phone call.
Then I turned it off just to switch the SIM back to my old phone and, after that, I haven't been able to switch the ZTE back on again. At first I thought it'd be the battery running out (although it reported 50% left while it was on), but I've had it connected for about 30 minutes now and I still can't turn it on...
Do you guys know if there is something I can try?
Thanks a lot and excuse me again if I posted in the wrong place... (and if I have, could you please point out where should I post it?)
Bernat.
EDIT: Today I woke up, I pressed the power button and... surprise! It just worked!
No Popup on phone
Hello
I have tried to follow the steps as you have mentioned.
Root>2nd Button>Popup>ok
But nothing appeared on my phone.
Can you guide me what should I do.
I have USB debugging and Unknown Source checked but no popup appeared on my phone.
raoyasir said:
Hello
I have tried to follow the steps as you have mentioned.
Root>2nd Button>Popup>ok
But nothing appeared on my phone.
Can you guide me what should I do.
I have USB debugging and Unknown Source checked but no popup appeared on my phone.
Click to expand...
Click to collapse
Do you have the usb-drivers installed ? (doublechek in device manager for windows ) Sometimes Win7-64 or Firewalls block uncertified drivers to install correctly. For 7-64 you can press F8 during early boot and choose "force unsigned drivers" or something simiar. On linux you should go through an Android adb installation howto, to correctly get debuginterface running.
Once you have installed chinese recover you can install some prerooted images from the hungarion or chinese sites.
br
cm
PS: has someone skills for implementing other languages or removing the chinese letters on some menues ?
I just bought ZTE V985 which is also tegra 3 device. Can anyone help how to root it?
Sent from my HTC Desire using xda app-developers app
how to root zte v985
someone please tell us how to root zte v985.
3G
Hi guys,
does anybody know if/how it is possible to connect to a 3G network with this terminal? In the specs it says it can only connect to Chinese 3G networks, so I'd like to know whether this is a software or a hardware restriction.
If it's a hardware one, I guess the solution must be pretty complex...
Cheers!
alz_uk said:
someone please tell us how to root zte v985.
Click to expand...
Click to collapse
I was able to root my ZTE V985 couple days ago. Download root installation package from:
http://pan.baidu.com/share/link?shareid=68344&uk=2753639880
1. Install ZTE USB driver first: Goto Settings -Developer options - enable Driver CDROM. Connect your phone to the computer and install driver package from ZTE. 985root.7z package has also ZTE USB driver but it didn't work on my Win 7, so I installed drivers from phone.
2. Turn off CDROM mode and enable USB debugging mode and Unknown sources
3. Unzip 985root.7z file to any folder
4. Run xxxroot.bat and command window appears. Script will stop and ask you to press any key (in Chinese)
5. Check that your phone is connected and press any key. Script will upload files to your phone
6. There will be popup window on your phone. Click Restore my data
7. Phone will then boot up but keep it connected to PC and wait until it is fully booted
8. if there's nothing going on in command window, press any key and command window closes. If your are rooted, you have SuperUser app
Original instructions from here:
http://bbs.gfan.com/android-5226211-1-1.html
And Google translation:
http://translate.google.com/transla...=http://bbs.gfan.com/android-5226211-1-1.html
suunnittelija said:
I was able to root my ZTE V985 couple days ago. Download root installation package from:
http://pan.baidu.com/share/link?shareid=68344&uk=2753639880
1. Install ZTE USB driver first: Goto Settings -Developer options - enable Driver CDROM. Connect your phone to the computer and install driver package from ZTE. 985root.7z package has also ZTE USB driver but it didn't work on my Win 7, so I installed drivers from phone.
2. Turn off CDROM mode and enable USB debugging mode and Unknown sources
3. Unzip 985root.7z file to any folder
4. Run xxxroot.bat and command window appears. Script will stop and ask you to press any key (in Chinese)
5. Check that your phone is connected and press any key. Script will upload files to your phone
6. There will be popup window on your phone. Click Restore my data
7. Phone will then boot up but keep it connected to PC and wait until it is fully booted
8. if there's nothing going on in command window, press any key and command window closes. If your are rooted, you have SuperUser app
Original instructions from here:
http://bbs.gfan.com/android-5226211-1-1.html
And Google translation:
http://translate.google.com/transla...=http://bbs.gfan.com/android-5226211-1-1.html
Click to expand...
Click to collapse
Thank you very much my freind, you are a kind and intelligent person.
---------- Post added at 12:31 AM ---------- Previous post was at 12:27 AM ----------
nabax said:
Hi guys,
does anybody know if/how it is possible to connect to a 3G network with this terminal? In the specs it says it can only connect to Chinese 3G networks, so I'd like to know whether this is a software or a hardware restriction.
If it's a hardware one, I guess the solution must be pretty complex...
Cheers!
Click to expand...
Click to collapse
Hahaha you silly billy, i know whats happened to you! You got the ZTE U985 instead of the V985. The ZTE U985 only supports TD-SCDMA 3g network which is CHINA only. You should have bought the ZTE V985 which is WCDMA 800/1900/2100 mhz which supports western 3G networks. LMFAO. I feel sorry for you fella.
Where did you buy the v985 ? I only can find offers from 350-400$ and for this pricing I can´t find any real advantages buying a chinese phone , there is also no DualSim,and normally very limited languages ( chinese cwm?),....
cmoegele said:
Where did you buy the v985 ? I only can find offers from 350-400$ and for this pricing I can´t find any real advantages buying a chinese phone , there is also no DualSim,and normally very limited languages ( chinese cwm?),....
Click to expand...
Click to collapse
I bought it from fastcardtech.com, only 275 USD with free delivery.
From hardware specs point of view this is a really good phone, fast as my Asus TF700T tab with Tegra 3. It also supports WCDMA 900/2100MHz which are the most used 3G frequencies in EU. It does have only English and Chinese languages, but I used MoreLocale 2 to get more choices. More Locale does not change system language (like settings, caller app etc) so those will remain in English, but for example now other apps like Google play, Chrome etc. supports the language you have chosen in MoreLocale.
Sent from my ZTE V985 using xda app-developers app
cmoegele said:
Where did you buy the v985 ? I only can find offers from 350-400$ and for this pricing I can´t find any real advantages buying a chinese phone , there is also no DualSim,and normally very limited languages ( chinese cwm?),....
Click to expand...
Click to collapse
Dont get it wrong my mate the zte v985 is a beast of a phone + a smart piece of hardware. Only downfall i see is the limited rom/root/customization support since its new (october 2012)
Reasons why you should purchase the zte v985:
1. really supports APP2SD (install apps to external sd so you never run out of space and you dont have to throw away your phone when internal memory of 4GB gets full like most other android phones)
2. quad core cpu + 12 core NVIDIA gpu (theres websites full of games made only for this cpu + gpu)
3. USB OTG (using your superfast cpu and gpu together with usb otg you can turn your phone into an high class gaming system using two usb game controllers playing arcade roms and 3d games ON YOUR PHONE!). This is an awesome feature that not all phones support even some high performance quad core phones dont have this function.
4. 720P HD screen + 1080P HD Playback/Recording
5. Full MHL support (usb to hdmi)
6. Cheapest all round high performance quad core. Awesome price (£190) for a phone compared to other quad core high performance phones e.g galaxy note 2 @ £500
NOTE: if you would like to buy this phone for the price mentioned leave a message with your email or contact me i know a seller in china.
NOTE: Or you could wait another month or two and buy the new mtk 6589 quad core phones such as the UMI X2 which is quad core, DUAL SIM, usb otg, 2GB RAM, 32GB ROM and dirt cheap (£200!!!)
I get my ZTE V985 today through the post, cant wait till i get it!
Recovery in english language?
Hi
Anyone found Recovery in English language?
Google play
I can install google play, but if i open it, it immediatly shuts down again...
Any idea's ?
cwm zte u950 test 1 (build, 28 nov 2012) by me.
===================================
(cwm-u950-6.0.2.3-permanent)
-------------------------------------------
CRC32 : D2CD4005
MD5 : A1C6B72375B2E79100AA9BE52D0F30C2
SHA-1 : C7B3165D1E1F7463BFF16C0DE7747E6B3EC3F807
xxx.media*fire.com/download.php?0411sb2m1kkyrv4
(cwm-u950-6.0.2.3-temporary)
------------------------------------------
CRC32 : 830121A8
MD5 : 8239E70CB81548FE4427C505A5184749
SHA-1 : 9CF9CED3EC6CA2B79AE174E03A423435BB0FFFAC
xxx.media*fire.com/download.php?m90c896m17u0o9p
sorry.. i still need to learn..
please report cwm zte u950 test 1 (build, 28 nov 2012).
suunnittelija said:
I bought it from fastcardtech.com, only 275 USD with free delivery.
From hardware specs point of view this is a really good phone, fast as my Asus TF700T tab with Tegra 3. It also supports WCDMA 900/2100MHz which are the most used 3G frequencies in EU. It does have only English and Chinese languages, but I used MoreLocale 2 to get more choices. More Locale does not change system language (like settings, caller app etc) so those will remain in English, but for example now other apps like Google play, Chrome etc. supports the language you have chosen in MoreLocale.
Sent from my ZTE V985 using xda app-developers app
Click to expand...
Click to collapse
ZTE Grand Era V985 Recovery (support English)download link: pan.baidu.com/share/link?shareid=372147&uk=973327405
If you have any problems,please sent a email to me ,my email address is '[email protected]' ,i can help root your ZTE Grand Era V985,and install the recovery,the recovery includes English language.At last,the Android 4.2 for V985 will coming soon,maybe in April,if anyone need ,i will send to you.Thank you.
i found twrp for the zte u950 in english in this package, it is in the folder recovery_3 :good:
what do you think? is it possible to make the zt3 u980 to work with european 3g network? i thought to flash the baseband from zte v985 on the zte u950... do you think its possible?
More stuff in English
hey Heatshiver...u can add these in your OP
I found some roms HERE for U950 which support english language..and atleast instructions are in english
2 or 3 of them are based on MIUI ...
I've tried the 1st one...works perfectly so didn't flash others
Extracted img file of twrp recovery (english) from the package provided by superpfpf - attached in the post
After 3 months of searching, I'm presenting you the method to Root your ASUS Fonepad 7 FE375CG (FE375CXG)
Introduction:
Originally this Rooting method appeared on 4pda, a Russian android forum meant for Russian community.
I translated the content of the Rooting in English below.
I hope the people, who have long waited for a working Lolipop Root, will find this guide useful.
Disclaimer:
* Warranty is void.
* I don’t guarantee that this will work.
* It maybe cause bad effects to your tablet.
* You are responsible for any damages or other issues that may arise directly or indirectly because of this.
* Very important: All your data and programs will be lost!
Before starting:
This root is specifically for WW_fonepad-12.14.3.18 (that's World wide version - lolipop).
This root will work both for FE375CG and FE375CXG.
To this date, 12-March-2016, WW_fonepad-12.14.3.18 is the latest update for this tablet.
Using this method will require to download 4 objects, in total of 900 MB.
Using this method will require a PC and a SDcard.
As for SDcards, I recommend Class 10 SDcard for android.
Step1: Pre-rooting - Check your software model.
1. Make sure that you are fully updated to WW_fonepad-12.14.3.18 (Lolipop) via OTA update.
2. You can check your firmware version here. ::: Settings --> About --> Software information --> Build number
Step2: Preparing firmware
1. Go ahead and download firmware ==> UL-K019-WW-12.14.3.18-user.zip (Lolipop) (800mb) ::: (Look at this picture)
2. Rename the zip file to MOFD_SDUPDATE.zip
3. Place MOFD_SDUPDATE.zip in your SDcard. (Don't put it inside another folder. ) (Look at this picture)
Step3: Preparing USB connection
1. Download USB-drivers for ASUS connectivity ===> Download ASUS_Android_USB_drivers_for_Windows.zip, then unpack it, then install Install_Driver.bat
2. Download USB-drivers for ASUS connectivity ==> Download and install IntelDnXUSBDriverSetup.zip.
Step4: Rooting
1. Turn off your Asus fonepad 7 FE375CG (FE375CXG)
2. At the same time, Press and hold Vol+, Vol- and Power for 4 seconds. ::: Screen on your Fonepad will remain turned off
3. Connect Fonepad to computer
Initializing rooting/using downgrade.cmd:
4. Download rooting tool ===> Download Downgrade_K019_NEW.zip, unpack it and start Downgrade.cmd. ::: Blue window will appear on your monitor and start working
5. Wait till you see logo Intel appear on your tablet. Disconnect from PC then turn off your tablet by holding power-button.
6. On tablet, again press and hold Vol+, Vol- and Power for 4 seconds.
7. Connect Fonepad to computer
8. On computer, hit Enter. ::: Rooting will continue
9. Later, you'll get a notice "ERASE USER DATA (FACTORY RESET)?". When you see that you should Only press ENTER.
10. Wait at least 10 mins for the rooting process to finish. When everything is done, the blue window (Downgrade.cmd) will close by itself.
Finalizing rooting/using DROIDBOOT:
11. Once Downgrade.cmd closes, your tablet will be in DROIDBOOT screen.
12. On tablet, Insert your SDcard into Fonepad. (MAKE SURE THAT YOUR HAVE PLACED MOFD_SDUPDATE.zip INSIDE YOUR SDCARD (Like in Step2).
13. With Vol+ or Vol- navigate to “Recovery” then click Power to select ::: Your tablet will proceed to root. Wait 5~10 minutes. When everything is done, your tablet will be turned-on and ready.
Congratulations. You've done it!
14. Go ahead and update SuperSu in Play Store.
It worked for me so it should work for you.
Thank yous:
Thank you 4pda for providing this method of rooting, source.
I copy pasted disclaimer from this guy's post, someone else's thread, as this sums everything well.
To Suzukube, for providing feedback to this guide.
Cheers,
Mello
Thank you I bought one yesterday, I'm really lucky ! I can't found the Downgrade_K019_NEW.rar file ? I try this one but no downgrade.cmd inside https://yadi.sk/d/EjGOWsFuicPJE
suzukube said:
Thank you I bought one yesterday, I'm really lucky ! I can't found the Downgrade_K019_NEW.rar file ? I try this one but no downgrade.cmd inside https://yadi.sk/d/EjGOWsFuicPJE
Click to expand...
Click to collapse
Download link has been applied. You can find it in Step4. :good:
Thank you ! I'm trying again !
---------- Post added at 06:23 PM ---------- Previous post was at 05:28 PM ----------
Hello ! I successfully rooted my phone, your tuto is perfect
Just : 5. Wait till you see logo Asus/Intel appear on your tablet. Disconnect from PC then turn off your tablet by holding power-button.
Click to expand...
Click to collapse
>>> Only an Intel logo appeared for me. I waiting a little longer expecting seeing another Asus/Intel logo But it was fine ^^ ! And it's easy to do, we have almost nothing to do ! I rooted because 8gb of memory is not enough, so I want to incorporate Sys App Update in the System partition
Oh Also, after step 13, your tablet will take a lot of time to boot, like 5 minutes ^^ !
To save your device, there is an amazing Asus application. It is called "Sauvegarde" in french. YOu can use it to restore your apps settings
suzukube said:
Thank you ! I'm trying again !
---------- Post added at 06:23 PM ---------- Previous post was at 05:28 PM ----------
Hello ! I successfully rooted my phone, your tuto is perfect
>>> Only an Intel logo appeared for me. I waiting a little longer expecting seeing another Asus/Intel logo But it was fine ^^ ! And it's easy to do, we have almost nothing to do ! I rooted because 8gb of memory is not enough, so I want to incorporate Sys App Update in the System partition
Oh Also, after step 13, your tablet will take a lot of time to boot, like 5 minutes ^^ !
To save your device, there is an amazing Asus application. It is called "Sauvegarde" in french. YOu can use it to restore your apps settings
Click to expand...
Click to collapse
Haha, Keep your smile up!
I'm always happy to share a working solution with good people like you!
I will incorporate your feedback into the guide, thanks for your feedback!
Perfect I linked your tuto on my (frecnh) reviews of that Phablet ^^ ! Rooted, it's just perfect ! You can do so much things with it !
Thank you
it worked with my device fe375cg
Hi , is there any way not losing user data ?
m.tarhsaz said:
Hi , is there any way not losing user data ?
Click to expand...
Click to collapse
Hi Tarhsaz,
In short, there isn't
So for example, you should redownload your calculator........ O_O
Ahaha I'm kidding xD
But really, you should redownload whatever you want to have after Rooting.
And backup your important data on computer or somewhere else, before rooting.
i have message intel soc device detection failed
i need help
I followed all the instructions, and this was the result, I need help to get my phablet
finding update package...
E:failed to mount /sdcard (invalid argument)
E:Can´t mount /sdcard/MOFD_SDUPDATE.zip
SD Instalacion aborted.
E:Installation failed with status 1
Thanks
Carlbornoz said:
i need help
I followed all the instructions, and this was the result, I need help to get my phablet
finding update package...
E:failed to mount /sdcard (invalid argument)
E:Can´t mount /sdcard/MOFD_SDUPDATE.zip
SD Instalacion aborted.
E:Installation failed with status 1
Thanks
Click to expand...
Click to collapse
Did you stop at Step 13?
Did you make sure that you have put MOFD_SDUPDATE.zip in SD card before step 13?
Remember to place MOFD_SDUPDATE.zip in SD cards but not inside a folder
mellomilky said:
Did you stop at Step 13?
Did you make sure that you have put MOFD_SDUPDATE.zip in SD card before step 13?
Remember to place MOFD_SDUPDATE.zip in SD cards but not inside a folder
Click to expand...
Click to collapse
As it is in the instructions at the root of the sd card
Carlbornoz said:
As it is in the instructions at the root of the sd card
Click to expand...
Click to collapse
Try with a new sd card, it will work
hi, i need help. my fe375cxg got rooted according to step 10 without much problem. then i went to step 11 & inserted SD card keeping the file MOFD_SDUPDATE.zip in root folder but recovery at step 13 failed to find the file, so i mistakenly rebooted. now it does not go to recovery state. if i push vol up & power switch at the same time it vibrates & shows "ASUS IN SEARCH OF INCREDIBLE powered by android" but does not go to recovery. i assume if i can go to recovery then i can flash MOFD_SDUPDATE.zip file. can anybody suggest how to go to recovery OR any other idea how to proceed. Thanks a lot in advance for your feedback.
Edit: At last by pushing vol up & power switch at the same time for a short time i was able to go to recovery mode. However, it looks like the file name should be MOFD_SDUPDATE (not MOFD_SDUPDATE.zip, since it is already a zip file) in the root folder of SD card, and it worked smoothly for me.
At the same time, Press and hold Vol+, Vol- and Power for 4 seconds.
Doesnt work with my device Asus Fonepad FE375CXG-1A006A. Whats that for a mode? Is that recovery mode or bootloader? Should I feel a vibration when pushing these 3 buttons? Does this work with win10x64?
I tried now Recovery mode (like smith74 is suggesting in his edit), but now --> Intel SoC Device Detection Failed in the BlueWindow appears
I also tried it again starting the .cmd as administrator --> !!! ERROR !!! FWR_DnX NOT EXIST, EXIT!
Edit: Ok now I got it. (It works with Win10x64 too, you don't have to use Win7 or sth like that). The trick is that you don't get any haptic feedback from the FE375CXG and you also don't (nearly) see anything on screen of the fonepad. You really have to push all 3 buttons (+) (-) and (Power). You can count to 4 or (better) take a deep look on the fonepad-screen, it flickers! Then release the buttons. After when you plugin your device (and everything is ok) Windows shows a screen, installation of "moorefield" or "adb-drivers.." something like that. Then you can go on with 4) Downgrade.cmd
Great Job .. many thanxx
How to downgrade from Lollipop to kitkat on Asus fonepad fe375cg? please, help!
So I'm facing some problems after upgrading to Lollipop via OTA. The device became very slow, I can hardly use it. Can I use this method to downgrade to KitKat? In other words, Can I use Kitkat firmware instead of the lollipop and continue with the same steps?!
Confirmed work for K019 Asus Fonepad 7 FE375CXG, indonesia,
with latest firmware WW_fonepad-12.14.3.18 official ota.
never tampered with, locked bootloader, not rooted.
i only used this tablet for my porn device.
Thank you op,, you have no idea how i bricked 2 different asus devices with different methods,,, and this is the only method that works....
As for problems, i have a few:
1. Step 4-4, like zardoz77 said,, there's no feedback whether i successfully pressed the vol+,- and power button,,, for me,, there's no flickering screen either,,, but what works for me is,, you have to press that 3 button for EXACTLY 4 SECONDS, and then release it,,, more or less than 4 seconds,, then it's gonna be "intel soc detection failed".
2. Step 4-8, when i see intel logo on tablet, then disconnect -> press3 button -> reconnect -> hit enter,,, the blue window unable to recognize the tablet!! and there are dozens of "attempt to reconnect" text,,, then i yanked the usb cable,, and it continues to root,, turns out the problems is my usb cable,, just one of the few solutions of that particular step.
3. Step 4-13, for me, the first time boot after recovery is 15-20 minutes,, at first, i thought it failed,, but then gave it a time,, it will show you the welcome screen.
Thanks a lot OP,,
Now, time to strap those sweet dualshock3 controllers.
tyring to delete my posting ... but don't know how
Now dear friends I will give the solution of problems that occur after unbrick leeco pro3 who has internal storage problem like this
infinite thanks to my Chinese friend Hua found this solution by itself and thanks tora33 from leeco.re and mbtt from forum.one-teams(i use picture from him)
I'm not in charge of the operation to be performed, is designed to assist you in these processes
Charge your mobile phone
1) download : qfil, (that have correct partition) and put in C:/
https://yadi.sk/d/piVn4bpf3MqcHC
2) download : FlashOne1,9 , put in a folder and extract it ,
https://yadi.sk/d/PmVChpqZ3Mj2hz
3) download :fastboot rom
https://yadi.sk/d/uzdwFhie3MqcJs
4)download qq driver
https://yadi.sk/d/U4SIDH3B3Mixsh
run "FlashOne1,9"
How to qfil Flash
When select qfil flash type, press power key, volume up and volume down key at the same time, then the phone enter into qfil mode, connect USB cable with PC, wait for PC install driver automatically, then press ‘Refresh’ button on the tool, serial port will display on UI, select the port you want to flash, and make sure there is no other qcom device connected.
Select corresponding flash zip file, the path of zip file should not contain Chinese and special character. (Under qfil mode, the tool can’t get hardware information, you should check if the software and hardware is matching yourself.)
Press ‘Flash’ button, then start to unzip flash zip file to current folder, but if there is already a corresponding unzip file existing, ‘Decompression folder is exist, re-decompress or not?’ dialog will pop up, if select yes, will re-decompress, else not. After unzip finished, start to flash the phone automatically, and the progress bar display flashing progress(for me the bar not move stuck %1 i did wait 15minute then unplug phone and push power button long time, and at the same time, the flashing log will also be shown on UI.
After flash complete or error happened, a notification dialog will pop up.
after phone start go boot logo and wait by the way open fastboot rom and push le_zl1_fastboot
everyting go fine u get 24gb for 32gb phone and 54gb for 64gb phone
good luck i hope help you
Thanks
Work on x720 ...
Will this work on Custom OMNI rom please?
krugerbud said:
Will this work on Custom OMNI rom please?
Click to expand...
Click to collapse
Yes it should work
All you have to do is follow the steps.
Be careful, all your data will be erased!
lazye53 said:
Yes it should work
All you have to do is follow the steps.
Be careful, all your data will be erased!
Click to expand...
Click to collapse
But I already have 24GB out of 32GB , but still have storage issues when using the phone. APps and services randomly crash unable to fully use phone.
I guess I do not need this then, must be some other issue?
krugerbud said:
But I already have 24GB out of 32GB , but still have storage issues when using the phone. APps and services randomly crash unable to fully use phone.
I guess I do not need this then, must be some other issue?
Click to expand...
Click to collapse
This issue is only for those who are missing storage.
If you have another storage problem, look for another solution.
Storage Problem LeEco Le Pro 3 X720 - 4 GB/32 GB
I followed instructions but it didn't work.
What can I do in order to increase storage to 24 GB?
qfil mode error
Is it for restoring the original storge capacity for Le Pro 3? The reason why I'm asking this is becuase I am currently stuck on qufil rom because it keeps making error everytime I tried to go to the launcher. Will it work on my circumstance?