I need help with a tilt 2 with sllep of death - Touch Pro2, Tilt 2 Windows Mobile General

i bought a tilt 2 (used) in ebay. and it comes with the "sleep of death" problem. it comes with the hard spl installed. i tried fix it flashing with the oem rom of at&t and others cooked rom. and I have not succeeded. however when i install froyo from sd card the power buttom works fine.
the problem exactly is : when the phone screen turns stanby if you want turn on again the screen lcd and touch screen works but the backlight not turn on. i need a soft reset.
if anyone know how help me i will be happy

Related

white screen non stop

hello to all,
I've searched many white screen problem threads, but didn't find any similar.
i am sorry if I missed one.
I am asking you for help.
I have spv m3100(hermes 100)
I bought it used and it had instaled htc europe wm6 rom. after few days I decided to flash black x rc.
before i did this, I made super cid with RUU_HERM_Unlock_v3a.exe and than also flash hard spl v7. everything was fine until few days ago when butons stop working. and at the end the green led was blinking all the time and green and red phone light was on all the time as well (also if phone was in flight mode).
I decided to flash official rom and I checked my bootloader it was showing ipl 1.04 and hard spl 2.10.
I flashed WWE 3.54.255.3 with radio 1.48.00.10 and everything went just fine at the end was written congratulation....
it costumized and make one or two soft reset and than I start to instal my favorite programs (few spb, smartmovie, dictionary...).
I do not remember why but after I set regional settings I did not soft reset with stylus but I put out battery when phone was stil on.
after that screen is white all the time. I made many soft resets, hard resets, try to enter bootloader but screen is all the time white.
when i turn it on and it is white I connect it to computer and it connects normal and i can also explore my files, but screen is all the time white.
I left it more than 20min without battery and try again but is stil the same.
after that I keep battery out of phone and leave it sop over the night. in the morning was stil the same.
i do not know what to do.
please help.
thank you and best regards
miha
since you mention a problem with the buttons, it *could* be hardware related. There is a thread up here where those problems (connections usually) are explained.
would you be so kind and tell me which thread you meant.
it seemed nothing wrong is with my phone only colors are missing (everything is white). i think also touchscreen is working. if I turn it off with power button (holding for few seconds), it beeps and you get message if you realy want to turn it off. because I know exactly where yes button is, the phone goes off.
I apreciate every help I can get.
thanks
I had a white screen issue .. do this in this specific order
1) make sure you have olipro latest version (use the search)
if problem persists
2) Use an WM5 rom and see if the white screen is happening
if problem perisists
3) Replace the battery (cheapest option)
if problem perisists
4) Its a hardware fault and you will have to send it off to get fixed or replace the unit .. sorry
alive again
I solved the problem.
thanks to this thread
http://forum.xda-developers.com/showthread.php?p=1698828#post1698828
and this instructions http://inuchanbt.blog54.fc2.com/blog-entry-100.html.
thanks to people who answer my problem
Medon
I have the same problem, the link to the blog below takes you to How to disassemble your device.... could you find the correct link & repost pretty please?
Thanks,
Andy

Boot problem

Hi.
My Artemis doesn't turn on, and doesn't even charge.
I don't know what has happened, it was in suspend mode, i pressed the power button, and the screen lights up all white.
I had to remove the battery to turn it off.
Now it doesn't do anything. I tried the soft and hard reset, but to no avail.
Is it dead?
PS: I left it without battery for a couple of hours, and it turned on, but then the screen turns all white, and it's dead again.
boot problem
Hi,
I have the same problem.
It doesn´t turn on and it doesn´t charge.
I don´t know how to flash the artemis. I can not enter in bootloader mode and I can´t sync it because activesync doesn´t work.
I remove the battery too but it turns off. I tried a soft and hard reset but
It does nothing.
any solution? please
Thank you
had a similar problem last month too. sent it back to htc authorised service dealer and was diagnosed with a faulty motherboard. luckily, it's still under warranty and they changed the MB. all functioning well now..
I've had five different motherboards and I'm still in trouble - I suspect there is a bad batch out there, as my original worked fine for about six months.... since then (its a long story.....)
Hy.
I have the same problem, can't even start by bootloader, sincer my batterry run out, i can't power up my artemis, any reason why ?
The battery is full .I tested on another artemis .
Edit: The only wrong thing I guess i did was flashing it to a touch rom, but it was all good till it run out of battery, if I sent htc to the warranty, they won't fix my problem because of the rom right ?

Hardware issue after a fall

Hey all,
My friend dropped his P3300 some days ago and it started behaving wierdly.It was freezing when it ran TOMTOM and some times froze at the HTC screen during a soft reset.
After a few days , it froze completely at the HTC screen and never came back on again. Not even the charging indicator LED works.
Any ideas and recommendations?
Does it enter Bootloader mode atleast? If yes, then try flashing a new ROM..
Regards,
Carty..
Thanx Carty.
the boot loader comes on and off... it switches off when the outer case moves.. So I guess we have to send it for a repair.

Touch Pro 2 Turns off randomly

I have this new T-Mobile Touch Pro 2. I currently have the Stock European ROM (6.5) on it. Before that, I was using the TMO 6.5 version. My problem is that the phone randomly freezes/dies/turns itself off while sitting idle. And every time it happens, I either have to soft reset it or take the battery out and put it back in to turn it back on. Simply pressing the power button doesn't do anything. Funny thing is that this phone is a replacement that was sent to me by T-Mobile because my first device was doing the same thing (which I had for about a month). T-Mobile tech support was just as lost as me. Can anyone here help me?
I have the exact same problem! Have you found a solution or at least learned the cause of the problem ?
Phone turns off ramdomly
Hi
I have the same problem the phone is shutting down ramdomly without any warning and i have to use the power button to turn it on again
any solution guys ??
Did you task29 the rhodium before flashing the new rom?
Sometimes flashing the new rom doesn't clear the memory properly leaving traces of old files to foul up the operation. Flashing task29 before flashing a new rom will stop this.
After you flash task29 there will be NO os on the rhodium. You will need to pull the battery, Put it into bootloader and then flash new rom from PC or use sd card method.
Cheers...
I have exactly the same problem, 2-3 times a day, I need to soft reset it. The phone was working well until I moved from 6.1 (original) to 6.5; I believe the new radio has issues. Any recommendation, flashing the radio does not solve the problem.
I used to have 1-3 SODs a day. Now I have only one SOD a month. My solution was to remove compact framework 3.5 and that weathersolution where you can add new cities. By the way; I upgraded to WM 6.5. Before the upgrade I had no SODs.
Sorry to bring up an old topic, but I recently acquired a Touch Pro 2 (RHOD100, original HTC model) and having exact the same issue. There's no saying when it's happening, but always during an action. Had it when pressing the End key after a call, when pulling the Usb cable from the device, and during other things too.
Hardware seems fine, battery is firmly in place and contacts are fine, and clean.
Having factory WM 6.5 Rom on it. And like mentioned before, I also do have Compact Framework 3.5 installed since it's required by some of my software.
Anyone ever found a solution that's confirmed to solve the issue?
I'm sorry for bumping up an old thread but after doing a search this was the first one that was listed which isn't 'That old'. I have just bought one of these phones, brand new, from factory. It comes with windows 6.5 and runs the OS version for the phone is - 5.2.21887 (21887.5.0.86) The phone seems to randomly just shut off without notice and to be able to turn it back on again to use it, I've got to take the battery out and put it back in again, then it will be able to turn back on. When the phone does enter the state of completely turning itself off. I have noticed that my notification LED light does flash green, I don't know why it does this. But if anyone has some help for me to sort this problem out and enable me to use my phone perfectly then that would be great!
Yet again, sorry for bumping up an oldish thread

screen is not responding, help needed please.

my tp2 touch screen is not responding suddenly!!! the problem started only after i answered some call through the screen slider, however, the touch screen is not responding to my fingers ever since !!!!
now i'm operating the phone only through the buttons !! but as if it is not touch screen!!
anyone have a clue about what the problem can be?? please help me. my device runs wm 6.5 and this is the first time to have this problem, i did soft reset many times but no imrovment!!
I had SOD this early morning and it was my first, do you guys think there is a relation between these events???
I have the same problem.
Just happened this morning.
I was able to use my mobiler to access the screen.
Tried several hard resets. No luck.
Tried re-installing energy Rom (4.1)
Then tried the new Energy Rom (4.11) still no luck.
But then I got the big idea to go back to the stock ROM. Now I cannot use the on screen prompts to access "my mobiler"
Anybody have any suggestions or is it back to AT&T for a new phone?
so whe you back to the stock rom, did u get ur screen working again??
No. no workey
Now that stock rom is on. I keep going back to the "Sim Card Changed" screen. I can not tap "cancel" or "Next". I can use the hard buttons so I am able to get to the phone and then use keyboard to dial.
Still no touch screen. And no work around with keyboard to get to screen. need a "Tab" button. then might be okay.
this sucks.
Just a quick bump before I go to AT&t in the morning.
Try running task 29 and then flash back to a stock.
And have you tried taking your sim card out of you're phone? Maybe that will avoid the message.
i'm buying a black berry
Does your screen look as if an oily residue is under the touch screen part?
My screen stopped responding a few weeks after the appearance of the 'oil' and Vodafone swapped it with no problems. It seems like a fairly common problem
yes, I've got that oily spot and somehow i managed to relief the problem only for minutes when i raised the digitizer carefuly which got me the screen working for few minutes untill it went unresponsive again after while. I'm looking forward to do alcohol swab to this oily spot and will see weather this will solve the problem..

Categories

Resources