After flashing Emerald Envy my phone does not mount anymore, and yes i uninstalled and reistalled drivers again, changed the port location, everything. Anybody?
Bad USB cable maybe? My stock USB cable will charge just fine but if I use it to try and mount my phone nothing shows up anymore.
shawayne21 said:
After flashing Emerald Envy my phone does not mount anymore, and yes i uninstalled and reistalled drivers again, changed the port location, everything. Anybody?
Click to expand...
Click to collapse
Does your phone make the connection noise on the computer? If so go to control panel>system> device manager find Samsung Android as either Other or in USB and click it and hit update drivers and wait while Windows finds the 5 drivers it needs. I have 2 phones, all of a sudden one could connect and one wouldn't. Updated the drivers and now one shows up as F and the other as E..go figure.
Turn on usb debugging if it's off. Turn off usb debugging if its on.
I tried all of this and still nothing guys anything else?
shawayne21 said:
I tried all of this and still nothing guys anything else?
Click to expand...
Click to collapse
Did Windows load all 5 drivers from Windows update?
kennyglass123 said:
Did Windows load all 5 drivers from Windows update?
Click to expand...
Click to collapse
Windows Update wouldn't get any of the drivers for me (Windows 7 Ultimate, SP1) so I had to install the ones that came with one of the OneClickRoot zips.
kennyglass123 said:
Did Windows load all 5 drivers from Windows update?
Click to expand...
Click to collapse
It only said, your device is already updated to the latest drivers.
jered6323 said:
Windows Update wouldn't get any of the drivers for me (Windows 7 Ultimate, SP1) so I had to install the ones that came with one of the OneClickRoot zips.
Click to expand...
Click to collapse
did this too with no luck.
Related
Bricked my e973
i installed all the drivers and installers
but
whenever i try to perform download mode using windows, it says that the driver is missing
please help..
im depressed atm lol
What rom is on the phone?
Have you installed LG universal drivers?
t1mman said:
What rom is on the phone?
Have you installed LG universal drivers?
Click to expand...
Click to collapse
yeah..drivers are installed...but everytime i try to set it on download mode, it tells me that the driver is not installed
i also tried it on both usb 2 and usb 3 ports
assphunk said:
yeah..drivers are installed...but everytime i try to set it on download mode, it tells me that the driver is not installed
i also tried it on both usb 2 and usb 3 ports
Click to expand...
Click to collapse
Are u using window 8 or 7?
usb drivers are problem in windows 8.
minnaing said:
Are u using window 8 or 7?
usb drivers are problem in windows 8.
Click to expand...
Click to collapse
im using windows 7
my phone might be bricked for good
What usb ports are you using?do you have a laptop,a desktop?
If you are on desktop,do not use front usb ports,usb hub,not.even an usb extension cable. Go for rear usb. Another data cable would do the trick too. If you are on a laptop,try to use another. Go to a friend or something. Sometimes,windows acts strange. Happened to me some time ago,couldn't make the damn thing install drivers for a xperia arc s,while on pc i did it in 30 seconds..after reinstalling windows,the laptop worked too.
So,bottom line,don't give up,just try other machines. It may a corrupted windows.
Sent from LG E975 pwd by CM 10.2
Hello, I cannot get my computer to recognize my phone while in download mode, thus I cannot load a KDZ file to restore my soft bricked phone. I have the latest LG device drivers installed and have been able to transfer files before I bricked my phone (I accidentally wiped the OS in TWRP). Device manager states that there is a problem with the drivers. Is there anyway I can restore my phone? Thanks in advance
- Philip
basketballexplo said:
Hello, I cannot get my computer to recognize my phone while in download mode, thus I cannot load a KDZ file to restore my soft bricked phone. I have the latest LG device drivers installed and have been able to transfer files before I bricked my phone (I accidentally wiped the OS in TWRP). Device manager states that there is a problem with the drivers. Is there anyway I can restore my phone? Thanks in advance
- Philip
Click to expand...
Click to collapse
Reinstall the USB driver, Change USB Port
uppon2 said:
Reinstall the USB driver, Change USB Port
Click to expand...
Click to collapse
I have tried uninstalling the drivers many time and have also let Windows find the drivers itself but it says that the driver cannot be found.
basketballexplo said:
I have tried uninstalling the drivers many time and have also let Windows find the drivers itself but it says that the driver cannot be found.
Click to expand...
Click to collapse
Try a different USB cable and port. Have you got ADB installed? If so you should do a complete update of that too
uppon2 said:
Reinstall the USB driver, Change USB Port
Click to expand...
Click to collapse
uppon2 said:
Try a different USB cable and port. Have you got ADB installed? If so you should do a complete update of that too
Click to expand...
Click to collapse
Thanks for the help. but I finally got it to work by using a Windows 7 computer. I believe that there was something interfering with the drivers on my Windows 8 64 bit version.
basketballexplo said:
Thanks for the help. but I finally got it to work by using a Windows 7 computer. I believe that there was something interfering with the drivers on my Windows 8 64 bit version.
Click to expand...
Click to collapse
Glad to hear you have it working
Need Some Help!
I use the Windows 8.1 and not able to connect to the USB mode!
I can not flash kernel, alas!
In Windows Explorer, locate the device in bootloader mode but no connection!
what is the solution?
szunyi77 said:
Need Some Help!
I use the Windows 8.1 and not able to connect to the USB mode!
I can not flash kernel, alas!
In Windows Explorer, locate the device in bootloader mode but no connection!
what is the solution?
Click to expand...
Click to collapse
Just install latest HTC Sync Manager.
virgolib said:
Just install latest HTC Sync Manager.
Click to expand...
Click to collapse
Nor, unfortunately, is not good
Installed again several times and can not see the device in bootloader mode
usb debugging is turned into.
szunyi77 said:
Nor, unfortunately, is not good
Installed again several times and can not see the device in bootloader mode
usb debugging is turned into.
Click to expand...
Click to collapse
Have you install the latest one? try unintsall & reinstall it again, changing usb port and cable. sometime it will happen as driver conflict and try with another PC also.
virgolib said:
Have you install the latest one? try unintsall & reinstall it again, changing usb port and cable. sometime it will happen as driver conflict and try with another PC also.
Click to expand...
Click to collapse
The problems for the One X One Click v2.3 was the color!
I tried the One X One Click v2.1 and it recognizes the device!
Thanks to your help
After going through a replacement process (twice) after cracking the screen on my first device, I was relieved to find that the replacement I got sent wasn't updated to un-moddable status. However, after using rumrunner to s-off, flashing cwm 6.0.4.8 recovery, and using that to install cm11 m6 snapshot, I was disappointed to find that my phone will not connect to Windows in a manner where I can access USB storage. Enabling debugging in dev options does initiate the "device plugin sound" from Windows, but after looking in device manager, all that shows up there is "Android ADB Interface". When debugging is disabled, Windows makes no sounds, and there is nothing in the device manager. The only response i'm receiving is that the charge light on the device comes on. I would try to install drivers, but seeing as the computer doesn't even recognize that a device is plugged in, i'm pretty much halted on that front. Any comments or solutions would be greatly appreciated.
Cheers!
StaticSpark said:
After going through a replacement process (twice) after cracking the screen on my first device, I was relieved to find that the replacement I got sent wasn't updated to un-moddable status. However, after using rumrunner to s-off, flashing cwm 6.0.4.8 recovery, and using that to install cm11 m6 snapshot, I was disappointed to find that my phone will not connect to Windows in a manner where I can access USB storage. Enabling debugging in dev options does initiate the "device plugin sound" from Windows, but after looking in device manager, all that shows up there is "Android ADB Interface". When debugging is disabled, Windows makes no sounds, and there is nothing in the device manager. The only response i'm receiving is that the charge light on the device comes on. I would try to install drivers, but seeing as the computer doesn't even recognize that a device is plugged in, i'm pretty much halted on that front. Any comments or solutions would be greatly appreciated.
Cheers!
Click to expand...
Click to collapse
try a different USB port?
also, uninstall HTC drivers. reboot the pc then install the drivers again should fix this.
synisterwolf said:
try a different USB port?
also, uninstall HTC drivers. reboot the pc then install the drivers again should fix this.
Click to expand...
Click to collapse
Unfortunately, as the computer doesn't even react at all when I plug in the device, I can't manipulate drivers at all. That means no uninstalling or installing :/
StaticSpark said:
Unfortunately, as the computer doesn't even react at all when I plug in the device, I can't manipulate drivers at all. That means no uninstalling or installing :/
Click to expand...
Click to collapse
which windows are you on?
also HTC driver was an EXE file so you should be able to find in the uninstall program portion of windows.
synisterwolf said:
which windows are you on?
also HTC driver was an EXE file so you should be able to find in the uninstall program portion of windows.
Click to expand...
Click to collapse
Windows 7. But I never used HTC Sync or anything like that. I didn't install any exe's for drivers
StaticSpark said:
Windows 7. But I never used HTC Sync or anything like that. I didn't install any exe's for drivers
Click to expand...
Click to collapse
ah okay, install sync manager:
http://www.htc.com/us/software/htc-sync-manager/
once the windows sees the phone. feel free to remove the sync portion of the install and keep the driver installer on the pc.
this should fix it and wont mess with ADB or fastboot.
Hehe, thanks. I guess I'm just a little paranoid about having junky, manufacturer specific software on my pc. Will see if this works.
StaticSpark said:
Hehe, thanks. I guess I'm just a little paranoid about having junky, manufacturer specific software on my pc. Will see if this works.
Click to expand...
Click to collapse
me too. :/ but i found that this was the less headache way for me. sync and drivers will show up as 2 different installers. i deleted sync and kept the drivers. im sure one can uninstall the driver installer part of htc software and windows will keep the ini file intact but i never tried this.
synisterwolf said:
me too. :/ but i found that this was the less headache way for me. sync and drivers will show up as 2 different installers. i deleted sync and kept the drivers. im sure one can uninstall the driver installer part of htc software and windows will keep the ini file intact but i never tried this.
Click to expand...
Click to collapse
Thanks for your input! Turns out, i'm an idiot. I had to enable MTP in the usb connection settings >.<
StaticSpark said:
Hehe, thanks. I guess I'm just a little paranoid about having junky, manufacturer specific software on my pc. Will see if this works.
Click to expand...
Click to collapse
Your worried about junky software and you run windows
Glad to see you got everything worked out mate
Hey guys,
I am trying to connect my Nexus 7 to my pc (windows 8) so I can unroot it and start over. My problem is that my computer won't recognize my tablet (picture 1). So my first attempt was messing around with changing the tablet in and out of MTP, PTP, and Debugging mode. No luck. Second attempt, different cable that will connect my cellphone to my computer. No luck. Third attempt, updating drivers from google, and I discovered this: looking at picture 2 and picture 3, my computer tells me that there is no driver installed while simultaneously saying that the driver is up to date. Going back one screen it says my driver was last updated 2006. So my computer wont even recognize my tablet and at this point I am almost buy a new one and start over. Any ideas?
Thanks for all the help
Mike
With your nexus pluged in,Try going start computer. Right click on computer go to manage , device manager find where it says android phone at the top of the list click it and should see android composite adb interface right click and Uninstall the drivers. Unplug and reboot computer then plug in nexus and let it reinstall drivers should be good to go.
Rammv said:
With your nexus pluged in,Try going start computer. Right click on computer go to manage , device manager find where it says android phone at the top of the list click it and should see android composite adb interface right click and Uninstall the drivers. Unplug and reboot computer then plug in nexus and let it reinstall drivers should be good to go.
Click to expand...
Click to collapse
The problem is that when I connect my tablet it does not recognize it as a phone or tablet or anything. All that shows up is what Picture 1 I attached shows.
Have you updated your Android SDK?
nhizzat said:
Have you updated your Android SDK?
Click to expand...
Click to collapse
yes. Tried updating with the most recent updates for that day.
Well this is a Herp Derp answer, you need the Google USB Driver.
Sent from my Nexus 7 using XDA Free mobile app