[q] sd install using acs updater - Epic 4G Q&A, Help & Troubleshooting

If i choose to update my syndicate frozen rom to 1.2 using install from sd option because of a bad signal area....after i choose it..it sent me into recovery mode..what is my next step after that please...<rooted samsung epic..sfr 1.1...cwm> Thanks you for your time...

MrEpic said:
If i choose to update my syndicate frozen rom to 1.2 using install from sd option because of a bad signal area....after i choose it..it sent me into recovery mode..what is my next step after that please...<rooted samsung epic..sfr 1.1...cwm> Thanks you for your time...
Click to expand...
Click to collapse
this question should be asked in the acs updater thread buddy and if you look in that thread you might find the answer!

Related

[Q] Installing Midnight ROM v4.0 Help

I'm looking to install Midnight ROM v4.0.
I flashed my phone using Odin and followed the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=853209
art3mis-nyc said:
Stock EB13 Deodexed EXT4 + CW 3.0.0.6
Instructions:
Step 1. Boot your phone into download by powering off your phone holding 1 on the keyboard and holding power til you see the little Yellow digger.
Step 2. On your computer launch the included odin.exe and select the included EB13-ext4.pit and under PDA select the included EB13-Extended-3.tar
Step 3. Plug in the usb cable.(if it's done right you should see a yellow Com device.)
Step 4. Tick Repartition
Step 4. Click Start and wait.
That's it. You've got EB13 Release and clockwork preinstalled, rooted, and ready to use.To get into Clockwork, hold Volume Down Camera and Power to flash your own rom.
Enjoy!.
Click to expand...
Click to collapse
I have Midnight ROM v4.0 on my sd card and was wondering if all I have to do now is boot into CW3 and flash the rom. I've tried installing roms before and failing so I'm asking for help now.
Thanks in advance.
You got the hard part done.
Turn off device
3finger into CM3...toggle down to install zip from sd.. push camera button for yes then choose zip from sd...push camera button for yes select midnight rom push camera button for yes and install. Takes along time to install and boot the first time dont freak and make sure you read midnights install instructions
If you want the full rom, be sure to install the second .zip in the midNIGHT extras folder on your sd card.
Sent from my SPH-D700 using XDA App
Overstew said:
If you want the full rom, be sure to install the second .zip in the midNIGHT extras folder on your sd card.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Oh really. good to know. I also sere there is a v4.1. Do I have to install that as well?
yes you need to flash 4.1 after 4.0 and also flash files you want from midnight extras folder. Maybe you can try the syndicate rom frozen loaded edition for your first rom its a one shot flash, very simple.
I will have to check out out. From what I've read and seen midnight rom is the one I want to use though.
Thanks for all the help !
solblack said:
I will have to check out out. From what I've read and seen midnight rom is the one I want to use though.
Thanks for all the help !
Click to expand...
Click to collapse
midNight is totally worth an extra few zip flashes!!
So I flashed both 4.0 and 4.1 and now I'm getting an error that is force closing everything. What now?
Edit:
I believe this is the part where I go and flash in the extras to get stuff working. am I right?
Right; that has all the google apps that will stop those issues
jdelano said:
Right; that has all the google apps that will stop those issues
Click to expand...
Click to collapse
Huzzah! Midnight ROM up and running perfectly how I want it to. I realize now that I installed it right two times before just didn't realize that I needed to go into the extras and install things from there. DUR!
Thanks again for all the help! Love this forum more every time I'm here.
solblack said:
Huzzah! Midnight ROM up and running perfectly how I want it to. I realize now that I installed it right two times before just didn't realize that I needed to go into the extras and install things from there. DUR!
Thanks again for all the help! Love this forum more every time I'm here.
Click to expand...
Click to collapse
Hmmm. So I got a phone call today from my step grandparents today and ignored it. Then for some reason my phone restarted itself 2 or 3 times. Did I forget to install something?
Possibly, what did you install from the extras folder? I just do the standard edition update and delete what I don't want. That will give you everything but sprint bloat.
Sent from my SPH-D700 using XDA Premium App
Rounsy222 said:
Possibly, what did you install from the extras folder? I just do the standard edition update and delete what I don't want. That will give you everything but sprint bloat.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I didn't install much. I ended up Flashing the new Syndicate ROM and am loving it as well. Midnight ROM looks way better but Syndicate's Frozen ROM makes my phone feel way quicker. I'm torn as to which one I want to use.
Use what you feel is best. I have been using the midnight roms for a while and haven't had any issues.
Sent from my SPH-D700 using XDA Premium App

[Q] ROM install faillure

When i install a ROM they install but when i reboot my phone nothing happens some app icons change but that's it Please help
see page 2
Rooted Epic 4g EC05 Stock rom
You have to provide more information so we can help you out. What ROM are you installing? What is your current recovery? Are you using the purp 3.1.0.1? Did you wipe System/data, cache partition, and Dalvik Cache 3x? We can get you straightened out. Just give some more details.
Sent from my SPH-D700 using XDA Premium App
all ROM's do it but im trying to convert over to ext4 and run syndicate ROM . Yes i have wiped data/factory restore and flushed dalvik 3x every time... cwm recovery v2.5.1.0
you cant install srf 1.2 on that recovery.. you need to upgrade to 3.1.0.1, cwm2x does not support ext4
You need to update clockwork to 3.1.0.1. You're using an outdated recovery.
http://forum.xda-developers.com/showthread.php?t=1115999
oh .... how do i update i tried to flash with ROM manager but it obviously didn't work
samsungepic4g said:
oh .... how do i update i tried to flash with ROM manager but it obviously didn't work
Click to expand...
Click to collapse
The link above ur post has a flashed zip.
Sent from my SPH-D700 using XDA Premium App
samsungepic4g said:
oh .... how do i update i tried to flash with ROM manager but it obviously didn't work
Click to expand...
Click to collapse
Rom manager doesn't really work for epic. You have to turn off your phone and then hold camera, vol down and power to get into your recovery. Check qbking's videos. They will make a lot of sense. You may want to odin your phone and restart. I'm not sure how much craziness you may have started. Backup major stuff with Titanium and everything will pretty much be normal without major loss.
Wow, its been a while since I was that far back on recovery. Let me check TheRoot's link...EDIT..yup TheRoot's link has a flashable version of the 3.1.0.1 recovery that will get you right where you want to be to flash all of the current batch of ROMs. PM me if you get stuck and I will go step by step
Sent from my SPH-D700 using XDA Premium App
After you finish, download ACS updater and it'll give you the goodness you were looking for in Rom Manager. There's also a support thread in Apps.
hey tanks to every 1 who helped i flashed my epic to cwm recovery 3.1.0.1 purple now its going to be a pain in the but to convert to ext4
samsungepic4g said:
hey tanks to every 1 who helped i flashed my epic to cwm recovery 3.1.0.1 purple now its going to be a pain in the but to convert to ext4
Click to expand...
Click to collapse
If you're flashing SRF 1.2, don't worry. It's built in. Just flash the rom, journaling on and a kernel and you're on your way. Use the thanks button as well, please.
Ok im running sfr on my epic looks amazing and ext4 and set cpu 1200mhz combined is amazingly fast thanks to all
Sent from my SPH-D700 using XDA App

Themes won't install synergy rom

I have tried multiple times to install warms theme for synergy Rom rs1. I have installed manually from recovery and clockwork but neither one will work, any advice?
Sent from my Synergy Rom using XDA App
I'm a noob and don't really know much about this stuff but I went to this page from my phone and downloaded the warm theme (click on the link that says "View raw file" to start download). Then I moved the file to the root of the sd card, renamed it update.zip and then applied the update from recovery and it worked fine.
Not sure if that helps any.
http://code.google.com/p/synergy-th...eme-RLS1-incredible-synergy.zip?spec=svn4&r=4
+1 on this. I tried several of the sources and this is about the only one that I could get a clean download from.
cvbcbcmv said:
you should use my mirror for the download on page 265 of the rom.
Click to expand...
Click to collapse
Sent from my Synergy Rom using XDA App

[Q] new rom/kernel

Hey guys, I just rooted my phone a few hours ago from the tutorial here on this site for my android 2.3.3 hboot 2.16....well i finally got to root it and got really excited. THe main 2 reasons i rooted were for wifi tethering and terrible battery life. Bought an extended battery before but didnt help much.
Anyway i think i flashed it lol with superuser? ( i backed up files with rom manager and myrombackup) I just downloaded set cpu with the following settings
enabled check notifications check
screen off priority 100 245 max 245 min performance
charging full priority 50 998 max 245 min ondemand
battery<75 priority 50 806 max 245 min ondemand
So my question is, are these good settings? how much better do you think my battery life will be with these settings?
oh and do roms and kernels come in like the same zip file? where i flash them together? and which do you guys think is best for battery life, but similar to the evo stock rom? i dont wanna change my phone too much, i like it, just didnt like the battery life...sorry if this question is redundant, but most of the threads i found were really old so i didnt wanna put in an old rom or kernel if i dont have to.... THANK u guys so much before hand.
If you want to stay stock there are a few roms in the development forum that are stock with bloat removed and minimal mods. You might check some of those out.
One example is: http://forum.xda-developers.com/showthread.php?t=1249615
The next step would be a ROM that is ported to the Evo but with a stock look. I am running MikG which I think is one of the best.
A ROM will always come with a kernel that will be flashed with it. You can always flash a different kernel over it later. Freedom is a good kernel (see my sig for a link).
Sent from my PC36100
If your looking for a stock rooted ROM with good battery life you might want to try a froyo ROM with an sbc kernel you will get almost 2 times more out of your battery and its the same old sense 1.0 so you won't even notice a difference.
Sent from my PC36100 using XDA App
m20120 said:
If you want to stay stock there are a few roms in the development forum that are stock with bloat removed and minimal mods. You might check some of those out.
One example is: http://forum.xda-developers.com/showthread.php?t=1249615
The next step would be a ROM that is ported to the Evo but with a stock look. I am running MikG which I think is one of the best.
A ROM will always come with a kernel that will be flashed with it. You can always flash a different kernel over it later. Freedom is a good kernel (see my sig for a link).
Sent from my PC36100
Click to expand...
Click to collapse
thanks a lot! but umm how is the battery life on MikG? and what does bloating mean and how do i remove them? lol sorry if i sound like a newbie :/ and ohh- one question on roms, can i keep this rom forever lol, or will it end up not working one day and ill have to update to another one???
omg3 said:
thanks a lot! but umm how is the battery life on MikG? and what does bloating mean and how do i remove them? lol sorry if i sound like a newbie :/ and ohh- one question on roms, can i keep this rom forever lol, or will it end up not working one day and ill have to update to another one???
Click to expand...
Click to collapse
Battery is OK like any gb ROM and bloat is what we call any apps that come from our carrier that you don't want or need on the ROM like stocks ,nova , sprint TV etc..
Edit: you can remove apps "bloat" with any app that will let you like titanium backup I use antek app its free on the market.
Sent from my PC36100 using XDA App
linsalata28 said:
If your looking for a stock rooted ROM with good battery life you might want to try a froyo ROM with an sbc kernel you will get almost 2 times more out of your battery and its the same old sense 1.0 so you won't even notice a difference.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thanks, again im sorry if i sound like such a newbie- but the evo comes with sense 1.0? i thought it was something more updated then that lol- and 2x better is a lot better! but um same question, will these roms just up and stop working one day even if i never update the sprint update? or will i be able to keep it if im happy?
omg3 said:
Thanks, again im sorry if i sound like such a newbie- but the evo comes with sense 1.0? i thought it was something more updated then that lol- and 2x better is a lot better! but um same question, will these roms just up and stop working one day even if i never update the sprint update? or will i be able to keep it if im happy?
Click to expand...
Click to collapse
Yeah the evo got stuck with sense 1.0 even with the gb update .
If what ever ROM you flash works for you you can keep it forever if you like you will need to try out a few ROMs they all work different on each evo there are a few different types if evos .
What might work good for me might not for you.
Sent from my PC36100 using XDA App
Here is a link to a very nice froyo ROM that runs nice and you can flash an sbc kernel for better battery.
http://forum.xda-developers.com/showthread.php?t=793471
Sent from my PC36100 using XDA App
linsalata28 said:
Yeah the evo got stuck with sense 1.0 even with the gb update .
If what ever ROM you flash works for you you can keep it forever if you like you will need to try out a few ROMs they all work different on each evo there are a few different types if evos .
What might work good for me might not for you.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
ohhh makes sense now thank u! should i just get the rom i want from this site?
and just to recap, i wipe/factory reset the phone from the loading screen, then backup? even if i already backed up?? and then flash the phone with the new rom and kernel?
Edit: just read ur last post thanks!
omg3 said:
ohhh makes sense now thank u! should i just get the rom i want from this site?
and just to recap, i wipe/factory reset the phone from the loading screen, then backup? even if i already backed up?? and then flash the phone with the new rom and kernel?
Click to expand...
Click to collapse
What recovery are you using ?
I recommend amon ra 2.3 if your not already .
If you already backed up your ROM from recovery "nandroid backup" then you don't need to do it again its just in case something goes wrong so you can go back to it.
Yes download the ROM from here and the kernel then wipe everything except your sd card and battery stats "you can wipe your battery stats if your battery is at a 100%" then flash the ROM and then the kernel.
If you get any fc's after first boot fix permissions if that doesn't work go back into recovery and wipe cache and dalvik cache and reboot that will fix most problems.
Hope that helps you out.
Sent from my PC36100 using XDA App
linsalata28 said:
What recovery are you using ?
I recommend amon ra 2.3 if your not already .
If you already backed up your ROM from recovery "nandroid backup" then you don't need to do it again its just in case something goes wrong so you can go back to it.
Yes download the ROM from here and the kernel then wipe everything except your sd card and battery stats "you can wipe your battery stats if your battery is at a 100%" then flash the ROM and then the kernel.
If you get any fc's after first boot fix permissions if that doesn't work go back into recovery and wipe cache and dalvik cache and reboot that will fix most problems.
Hope that helps you out.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
wow, you're super helpful
i actually used the superuser backup- from this thread- http://forum.xda-developers.com/showthread.php?t=1218386
what's the difference between that and amon ra 2.3?
also i did a backup from the recovery and also from rommanager.
and finally, lets say i get the rom you told me about, http://forum.xda-developers.com/showthread.php?t=793471 - (warm twopoint) it says on that thread,
As this ROM now uses the latest official HTC Kernel (#15) you MUST update your Radio/Wimax. I recommend Calkulin's combo update which is available here or via direct download here.
Installation Instructions:
Download Rom and Radio/Wimax updates and place in the root of SDCard.[/B]
umm does the kernel come in the same file as the rom that i download? and where do I get the radio/wimax updates and what do I do with them? do i flash them too and when?
(should I get a separate kernel for better battery life? some people commented that the battery life wasn't great with this rom, so should i use a different kernel?)
omg3 said:
wow, you're super helpful
i actually used the superuser backup- from this thread- http://forum.xda-developers.com/showthread.php?t=1218386
what's the difference between that and amon ra 2.3?
also i did a backup from the recovery and also from rommanager.
and finally, lets say i get the rom you told me about, http://forum.xda-developers.com/showthread.php?t=793471 - (warm twopoint) it says on that thread,
As this ROM now uses the latest official HTC Kernel (#15) you MUST update your Radio/Wimax. I recommend Calkulin's combo update which is available here or via direct download here.
Installation Instructions:
Download Rom and Radio/Wimax updates and place in the root of SDCard.[/B]
umm does the kernel come in the same file as the rom that i download? and where do I get the radio/wimax updates and what do I do with them? do i flash them too and when?
(should I get a separate kernel for better battery life? some people commented that the battery life wasn't great with this rom, so should i use a different kernel?)
Click to expand...
Click to collapse
Superuser is an app the let you allow root to apps that need it.
You want to make a backup from recovery its called a nandroid backup I think you have clock work mod recovery you might want to switch to amon ra 2.3 you can get the link from my sig.
When you make a backup make sure to backup your wimax keys I think cwm does it on its own in ra2.3 you can pick and choose what you want to backup.
I'm not sure what radios your on but you should be good if you had 2.3 on your phone when you rooted it.
The ROM comes with a kernel but its the stock kernel give me a minute and I'll post a link to the ones that work with it.
Sent from my PC36100 using XDA App
Here are some kernels that work with any 2.2 ROM I use 4.3.4 sbc cfs havs more.
http://forum.xda-developers.com/showthread.php?t=719763
Here is a guide to understand the different kernels.
http://forum.xda-developers.com/showthread.php?t=894880
Sent from my PC36100 using XDA App
linsalata28 said:
Superuser is an app the let you allow root to apps that need it.
You want to make a backup from recovery its called a nandroid backup I think you have clock work mod recovery you might want to switch to amon ra 2.3 you can get the link from my sig.
When you make a backup make sure to backup your wimax keys I think cwm does it on its own in ra2.3 you can pick and choose what you want to backup.
I'm not sure what radios your on but you should be good if you had 2.3 on your phone when you rooted it.
The ROM comes with a kernel but its the stock kernel give me a minute and I'll post a link to the ones that work with it.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
ok, so im putting the PC36IMG.zip to my sd card, then putting phone into recovery, then putting install zip from sd card, and clicking on that PC36IMG...sound right?
omg3 said:
ok, so im putting the PC36IMG.zip to my sd card, then putting phone into recovery, then putting install zip from sd card, and clicking on that PC36IMG...sound right?
Click to expand...
Click to collapse
For the recovery zip make sure its on the root of your sd not in any folder then boot to your bootloader not recovery you can download an app called quick boot to do that or just turn your phone off then hold down volume and power when it comes to the bootloader it will automatically scan for the update just hit volume up to except it then you can reboot the phone or go to recovery.
Sent from my PC36100 using XDA App
You could download ROM Manager from the market and it has the option to flash ra2.3 in the app .
Sent from my PC36100 using XDA App
linsalata28 said:
You could download ROM Manager from the market and it has the option to flash ra2.3 in the app .
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
So if I use rom manager I dont have to go to the bootloader screen? or do i have to do both? I already went to rom manager premium, then used alternate flash and now it says current recovery RA recovery v2.3 and latest recovery Clockworkmod 5.0.2.2....
Do i do a nandroid backup after setting up amona RA?
omg3 said:
So if I use rom manager I dont have to go to the bootloader screen? or do i have to do both? I already went to rom manager premium, then used alternate flash and now it says current recovery RA recovery v2.3 and latest recovery Clockworkmod 5.0.2.2....
Do i do a nandroid backup after setting up amona RA?
Click to expand...
Click to collapse
No you don't have to flash it then I just forgot about rm and flashing it that way I don't use rm anymore only to fix permission.
Now when you go to recovery to make a backup go under backup/restore/ nand backup and select what you want to backup leave the ones that are checked then check android secure ,sdext if your sd is partitioned , and wimax I believe thats all I backup .
You don't need to backup recovery or cache .
You should also make a backup of just your wimax keys that way if you lose them in a flash you can restore just that and not have to restore a whole backup.
Sent from my PC36100 using XDA App
linsalata28 said:
No you don't have to flash it then I just forgot about rm and flashing it that way I don't use rm anymore only to fix permission.
Now when you go to recovery to make a backup go under backup/restore/ nand backup and select what you want to backup leave the ones that are checked then check android secure ,sdext if your sd is partitioned , and wimax I believe thats all I backup .
You don't need to backup recovery or cache .
You should also make a backup of just your wimax keys that way if you lose them in a flash you can restore just that and not have to restore a whole backup.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thank you so much! I did it both ways anyway lol, I'm currently doing a nandroid backup for everything, then doing it juts for wimax. THen ill copy them to my computer and flash drive just incase.
Ok, so i think i decided, I'm gonna get the [ROM] Myn’s Warm TwoPointTwo - [RLS 5 - 01/07/2011] - and for the kernel im gonna flash, 4.3.4-cfs-havs-more-sbc (More Aggressive HAVS) (can u make sure that's the one you have? and does it have at least 12 hours of moderate use? i text a lot, thats about it..)
ok now can you tell me if I have the steps right please?
- I'm going to download the rom Download Warm TwoPointTwo RLS 5 (Mirror 1) and paste it onto the root of my sd card.
- Then I'm going to download the kernel 4.3.4-cfs-havs-more-sbc (More Aggressive HAVS)- and paste it to the root of my sd card.
- Then, I use quick boot to go into recovery, then I wipe what I have to wipe/factory reset, then I flash the rom....
- THen I dont have to wipe again, and i just flash the kernel...THen, I can use myrombackup to get all my apps and the information in the apps back...
Should i use set cpu with this rom and kernel? and is thiss correct? lol- I'm really excited btw thank u sooo much---and oh the kernel i have on my phone right now is kernel version- 2.6.35.10...
omg3 said:
Thank you so much! I did it both ways anyway lol, I'm currently doing a nandroid backup for everything, then doing it juts for wimax. THen ill copy them to my computer and flash drive just incase.
Ok, so i think i decided, I'm gonna get the [ROM] Myn’s Warm TwoPointTwo - [RLS 5 - 01/07/2011] - and for the kernel im gonna flash, 4.3.4-cfs-havs-more-sbc (More Aggressive HAVS) (can u make sure that's the one you have? and does it have at least 12 hours of moderate use? i text a lot, thats about it..)
ok now can you tell me if I have the steps right please?
- I'm going to download the rom Download Warm TwoPointTwo RLS 5 (Mirror 1) and paste it onto the root of my sd card.
- Then I'm going to download the kernel 4.3.4-cfs-havs-more-sbc (More Aggressive HAVS)- and paste it to the root of my sd card.
- Then, I use quick boot to go into recovery, then I wipe what I have to wipe/factory reset, then I flash the rom....
- THen I dont have to wipe again, and i just flash the kernel...THen, I can use myrombackup to get all my apps and the information in the apps back...
Should i use set cpu with this rom and kernel? and is thiss correct? lol- I'm really excited btw thank u sooo much---and oh the kernel i have on my phone right now is kernel version- 2.6.35.10...
Click to expand...
Click to collapse
Use mybackup root to backup apps and data then use it to restore them.
Yes it sounds like you got it wipe everything except your sd card, battery stats and screen rotation I'll post a like to a super wipe I use that you can flash to make sure you wipe everything as well.
Then flash the ROM then the kernel then reboot.
If you get any force closes go back into recovery and wipe cache and dalvik cache then under other run fix uid package mismatch or what ever its called that will fix permissions from recovery.
http://www.4shared.com/file/p6mi6ogM/VR_SUPERWIPE.html
Flash this before you flash the ROM it will wipe everything for you do the wipes on your own as well.
After your all done you should download the app battery calibration and calibrate your battery to get more battery life it wipes you battery stats you can do it from recovery but you should just use the app it will tell you what to do.
Sent from my PC36100 using XDA App

[Q] Rom Manager

Ok so I have Clockwork Mod V. 5
I just installed
Rom Manager so I could use it to update Clean GB easier.
It keeps wanting me to install clock work.
How do I get it to see its already there
Thanks.
svcbadass said:
Ok so I have Clockwork Mod V. 5
I just installed
Rom Manager so I could use it to update Clean GB easier.
It keeps wanting me to install clock work.
How do I get it to see its already there
Thanks.
Click to expand...
Click to collapse
It's not until you install it. Rom Manager keeps it's own official copy on your sd card to unpack each time. Install it.
Sent from my SPH-D700 using XDA App
Yup, I installed CWM via rom manager, then had to flash it from the older ver of CWM before I could fully use it. Kinda odd, but whatever works right?
pvtjoker42 said:
Yup, I installed CWM via rom manager, then had to flash it from the older ver of CWM before I could fully use it. Kinda odd, but whatever works right?
Click to expand...
Click to collapse
No you didn't. Rom Manager uses it's own CWM and your phone via 3 finger has it's own recovery. If you want them to be the same THEN you have to flash CWM5 as well in whatever recovery is on your phone. ROM Managers CWM is on the sd card.
Sent from my SPH-D700 using XDA App
Ok SO I now have 2 versions of clock work ok no biggie.
but Rom manger says I currently have marcasaunt rom something or other installed but thats not what I actually have installed. any ideas?
svcbadass said:
Ok SO I now have 2 versions of clock work ok no biggie.
but Rom manger says I currently have marcasaunt rom something or other installed but thats not what I actually have installed. any ideas?
Click to expand...
Click to collapse
If you simply flash 5.027 you will have 2 CWMs on your phone and they will be the same. As far as the ROM labeling what ROM are you on and did you flash Marcusant's speed up tweaks? That may have caused the labeling error. What does your phone say in About Phone?
Sent from my SPH-D700 using XDA App
kennyglass123 said:
No you didn't. Rom Manager uses it's own CWM and your phone via 3 finger has it's own recovery. If you want them to be the same THEN you have to flash CWM5 as well in whatever recovery is on your phone. ROM Managers CWM is on the sd card.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Thanks for clarifying... Was working under the assumption they were 1 and the same..
crap yes I flashed his speed tweak and yes it now says that in about phone as well. hrmm now im lost on what to do lol
svcbadass said:
crap yes I flashed his speed tweak and yes it now says that in about phone as well. hrmm now im lost on what to do lol
Click to expand...
Click to collapse
You can just edit your build.prop and put your ROM's description on the line where it says marcusant.

Categories

Resources