Related
Hello everybody, i have a question for you all.. My problem: I have a s-off Desire with Alpharev CM7, CWM Recovery 4.0.0.5 and latest radio on it. I have tried to install many, MANY roms, but all, except 2, have the same problem.. After installation from the recovery, i only see the joker face from Alpharev, and nothing more. AceSMod007, RcMixHD, VillainRom and many more.. The only 2 exceptions are MIUI, that comes to its own bootscreen, but looping and no boot, and CyanogenMod, that works great. Why that? I have tried to install Hboot Sense, Hboot stock, but nothing.. Anyone should help me please? Many thanks, regards
have you partioned you sd, if not make an ext partition of 1GB with Gparted
If you are using cm7 hboot try upgrading to cm7r2 hboot from alpharev.nl as the roms mentioned require it.
TopGear63z said:
have you partioned you sd, if not make an ext partition of 1GB with Gparted
Click to expand...
Click to collapse
Yes both with ext3 (by cmw) and ext4.. hboot r2 but others too
Are you doing a full wipe before flashing the rom? This is needed when switching roms.
Only use cm7 hboot if your using cm7 or a rom that was designed to use that hboot. Otherwise stick with stock unless specifically required by the new rom untill you got it working.
If not maybe your recovery is messed up, try a different version.
Back up your sd and use 4EXT recovery to start from strach. Create aligned partitions with this recovery. Mostly, the boot loops happen when hboot is too small for the rom or ext partition(s) is broken or not aligned. Also you can fix your partition with e2fsck.
Try InsertCoin CM7, and do everything what is said above, should be fine then
mercianary said:
Are you doing a full wipe before flashing the rom? This is needed when switching roms.
Only use cm7 hboot if your using cm7 or a rom that was designed to use that hboot. Otherwise stick with stock unless specifically required by the new rom untill you got it working.
If not maybe your recovery is messed up, try a different version.
Click to expand...
Click to collapse
maybe that is.. I have installed alpharev stock hboot and reflashed original RUU, tomorrow i will try to root my phone again..
PS. with others Alpharev hboot, RUU won't upload, so, if you need to flash a RUU, is important that you install STOCK ALPHABOOT
I would appreciate if someone can help me...
Now, think that problems started with this new Hboot's (r2)... I installed oxygen r2 hboot just to try AOSP roms.
Now I have cm7 r2 hboot but something is very wrong since I can't flash many roms I flashed before. For example I tried to flash Reflex s (I saw many people on xda with cm7r2 hboot and Reflex s CM7 rom.) It reboots over and over at the point when first sense screen shows. Same thing with Insert Coin or StarBurst ROM.
Furthermore, it shows cash error when I use android flasher for Hboot flash so I flash my Hboot's via Hboot (zip file on sd-card and update), also Amon Ra recovery reports that some E: cash (something) can't be found.
I can, however, flash AOSP roms, and some sense roms (Sense-O-Villian CM7 ROM which i use now), but flashlight stoped working at all some time ago, and yesterday camera went blank and now have no camera also (maybe they broke but I cant figure it out since I can't flash other rom's).
I started to think that problem lies in Hboot and tried to downgrade Hboot 6.93.1002. to 0.93 but don't know how because when I used android flasher with Alpharev downgrade.img file i stucked at Hboot which says Alpharev Unlocked and I dont know what next should be done...
So phone works and also doesn't work and for now I'can't find solution and asking for help... Feels like I stucked on one or two roms... I'm not to experienced but tried to follow rules and threads I found here. Sorry for bad english also!
I partitioned sd card with MiniTool Partition Wizard (FAT32 6,5 gb, EXT4 1,5 gb)
--------------------------------
Desire PVT4 AMOLED, S-Off, Alpharev Hboot 6.93.1002. (cm7r2/oxygen r2) Amon Ra Recovery (latest) ROM: Don't know anymore
okay.. to address some of your issues:
1. The Alpharev downgrader is used when you need to S-ON your Desire. Alpharev HBoots are "locked", so they cannot be overwritten when you run a RUU, so you will remain S-OFF. So when you flash the downgrader, then run the RUU, you will be S-ON as the Hboot is "unlocked" and can be overwritten.
2. Some ROM's will not work on the CM7 R2 hboot because the /system partition is too small, so you would need to flash one with a bigger partition.
3. Try this:
- Backup your current rom (nand backup)
- boot into fastboot and use fastboot commander (requires Java SDK). Go to "Misc" and wipe system, cache, userdata & boot.
- flash the stock bravo hboot with fastboot commander (in the hboot, radio & rec tab - select the hboot.img and click flash SPL) (still S-OFF, just stock partition sizes)
- reboot into recovery and flash a new ROM.
Once you've done that and everything works fine go ahead and flash different HBoots that suit your ROM needs
Hboot MD5 7bd5234711364880de1fa982dcf3a2d6
Thanks for reply, but I did similar thing with android flasher and flashed stock Hboot, but it didnt downgraded my Hboot to 0,93 for Bravo PVT, I stucked with Hboot 6.93.1002, same thing here with fastbootComander... I,ll try flashing old CM7 with commander now... and same thing... i get msg that I cant revert to old Hboot... wich means that I can't flash old CM7 Hboot on Hboot ver. 6.93.1002. And here somewhere is prob. cause I saw that many people have Reflex s CM7 rom on phone but with new CM7r2 Hboot partitioning which means that it's compatible with new CM7r2 and that is logical cause new CM7r2 is bigger than old . It doesn't work for me... it simply reboots all the time and I allways pay attention about rom system partition... and sd card partitions ext3/4 (rom supports etc)
Practicly every ROM I flash rebots itself constantly, for example Villain rom which is compatible with cm7r2 reboots but good thing I have it's nand backup and when I restore everything seems ok...!!!??
Anyway I'll thank you for your help.... one more thing.... i think that I should be able to downgrade somehow without flashing RUU and S-ON again?!
When using r2 hboots, you always have to flash downgrader before you can change hboot (especially when you want to flash ruu). After this you can flash any hboot you want and you will still be s-off.
Swyped from Oxygen with Transparent XDA App
MatDrOiD said:
When using r2 hboots, you always have to flash downgrader before you can change hboot (especially when you want to flash ruu). After this you can flash any hboot you want and you will still be s-off.
Swyped from Oxygen with Transparent XDA App
Click to expand...
Click to collapse
Ok, tnx for info but how can I flash downgrade?
I mean, I flashed it and get to the poit where Hboot says Alpharev unlocked... what next... how to flash another hboot... With FastbootCmomander maybee? (After I flashed downgrader I flashed again r2 via hboot zip file cause I don't have old Hboot's zip files... but now I'll use FastbootCommander... i have old cm7 here somewhere...
And furthermore... I don't know what is the problem at all... cause I don't have probs with new Hboot but phone started to act weird, as I said, when I flash a new ROM, Villain for ex. it want let me to start using it due to constant reboots at startup and Villain suports CM7r2, cause I flashed it before and I also have nand backup of Villain which works when restored!!?? (now I have Villain ROM) Strange...
tnx
You flash the new hboot like any other hboot before, so with fastboot:
Code:
fastboot flash hboot <filename>
fastboot reboot-bootloader
fastboot erase cache
<filename> is only a placefolder which has to be replaced which the real filename without the "< >".
Did you flash hboot before or after flashing rom? You should always do it before flashing rom.
wait... my HBoot is 6.93.1002 and I haven't got any problems flashing hboots...... and you don't need to flash the downgrader every time!, only need it when you need S-ON when flashing a RUU.
bortak said:
wait... my HBoot is 6.93.1002 and I haven't got any problems flashing hboots...... and you don't need to flash the downgrader every time!, only need it when you need S-ON when flashing a RUU.
Click to expand...
Click to collapse
Good to know, thanks. Was not completely sure the downgrader is needed when you do not flash a ruu. When I change hboot I would always flash the downgrader, just to be on the safe side.
MatDrOiD said:
Good to know, thanks. Was not completely sure the downgrader is needed when you do not flash a ruu. When I change hboot I would always flash the downgrader, just to be on the safe side.
Click to expand...
Click to collapse
Fair do's, I could never be bothered.. and plus it saves me like.. 3 seconds of my time
Well I know all that and I also flashed Hboots without downgrader. But my problem still stands. For some reason I can't flash Roms I mean I can flash but then it bootloops forever. It feels like I have some files on sistem that can't be wiped anymore.
At the other hand when I restore my old nand of same rom, it works, as long as I don't flash mods, kernels or something that changes system, then I get android.
phone force closes on every home key press.
So now I'm bit scared to turn back S-ON and RUU and I'll have to do that because of warranty issue (camera works no more) Urgh...
Sent by mesage in the bottle ...
before you flash the downgrader make sure you flash the right RUU!!! otherwise if you get the wrong one you'll be stuck with S-ON and a ill-functioning phone. It's better for you to have to do it twice than be in trouble lol
I agree... but strange thing happened, after flashing few roms I tought that camera's gone. Yesterday in 2 am suddenly camera reappears and till now works fine. So I dont know if that's hard or soft error. I think it's soft but that's another reason to reflash s-on and RUU and back again, maybe sistem clears itself.
How can I know which RUU is right for my desire? I forgot to backup when did s-off...
----------------------
Desire Bravo Pvt4 amoled, hboot 6.93... cm7r2, rom: villain 2.7 aosp, ra recovery & cwm recovery both...
Sent by mesage in the bottle ...
If your phone's branded you should've made a goldcard so you can flash the WWE RUU's, if it's not branded.. then just flash the latest WWE RUU.
If it is branded, look here, for the right RUU for your phone.. obviously download the RUU for your network.
Secondly, if you made a backup of your original stock ROM, it helps a lot since you can look at the build version and match it with the RUU (What I did )
Or instead of flashing a RUU, why don't you just get fastboot commander, it allows you to wipe system, userdata, cache, boot & recovery.. which would solve your problem.. if there is one in the first place xD
Hi all!
I'm a little noobish on Android and customizing it, but I've been playing around and I've been trying to install Sense 3.0 Roms like:
Cool3D RunnyMede v2
Cool3D AceS v3
Aurora v03
Aced Off!
PyramidMod007
And every time when I try to install them I would get stuck at the HTC Splash screen(quietly brilliant); it would just constantly reboot that screen for some reason. I've tried letting it sit for 30 minutes but nothing happened
Here's what I have on my phone:
Revolutionary CWM
Bravo PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
And my installing procedure is:
1. Backup current nandroid
2. Delete cache, delete user data, delete dalvik cache
3. Install ROM
4. Install the rom converter CM7 --> HBoot.zip
5. Install Dalvik cache to ext. zip file
6. Reboot
I've actually tried installing them on CM7 too, but I reverted back to HBoot because my current rom requires Stock hboot.
Any help would be awesome! Thanks!
Try installing one at a time, rebooting between each one.
That's very weird something u are doing wrong for sure but can't understand what from what u wrote because there is no way that roms with sense 2.1 works and others with 3 no... It's impossible
Sent from my HTC Desire using XDA App
@ craftycarper1
What I did was backup and install one rom at a time, and when it doesn't work I revert back to my original rom, then I would try installing another one hours after or something, and I just repeated the process. I didn't install one on top of another.
@ halaros2
I was just actually trying to install other roms. I'm not sure what you mean by that 2.1 doesn't work with 3.0?
Thanks for the replies!
Are you rebooting after installing the rom?.....or are you installing rom, then Hboot, then Dalvik zip?
You need an ext partition on your SD card, do you not read the requirements before flashing?
Sent from my HTC Desire using XDA App
@ craftycarper1
I actually just install the rom, then install the hboot converter.zip and the dalvik zip. Am I supposed to reboot then install the zip files?
@ elliottg61
I do have an 1gb ext4 partition
hiohokaybye said:
And my installing procedure is:
1. Backup current nandroid
2. Delete cache, delete user data, delete dalvik cache
3. Install ROM
4. Install the rom converter CM7 --> HBoot.zip
5. Install Dalvik cache to ext. zip file
6. Reboot
Click to expand...
Click to collapse
Maybe add one more step before (3)
2.5. Install Hboot CM7/r2
Then replace step 4 with a reboot, making sure the rom works first, then following by installing any mod. When installing mod, also clear dalvik cache before and after
ikidntu said:
Maybe add one more step before (3)
2.5. Install Hboot CM7/r2
Then replace step 4 with a reboot, making sure the rom works first, then following by installing any mod. When installing mod, also clear dalvik cache before and after
Click to expand...
Click to collapse
I just followed your instruction, did a backup, cleared my data/cache/dalvik cache, installed CM7/r2 to HBoot, it's still giving me the whole constant reboot at the HTC splash screen
hiohokaybye said:
I just followed your instruction, did a backup, cleared my data/cache/dalvik cache, installed CM7/r2 to HBoot, it's still giving me the whole constant reboot at the HTC splash screen
Click to expand...
Click to collapse
Sad to hear that.
Maybe check following things :
1) On Hboot screen, does it show CM7 r2 - S-OFF, once you sure about that, can ignore any hboot installation later, it is because of other problem
2) Does it get to the 2nd stage of the boot i.e. showing "quite brilliant" ? if yes... should be booting to your rom soon, so wait !
3) Boot to recovery, mount sd-card to usb, and use gparted to check if you ext is there, 1GB and it's ext4, the other should be FAT32
- or you can remake it by using the partition sdcard on the recovery, and use gparted to convert it to ext4
This is really strange, you must be doing something wrong but I just can't work out what haha
Sent from my HTC Desire using XDA App
ikidntu said:
Sad to hear that.
Maybe check following things :
1) On Hboot screen, does it show CM7 r2 - S-OFF, once you sure about that, can ignore any hboot installation later, it is because of other problem
2) Does it get to the 2nd stage of the boot i.e. showing "quite brilliant" ? if yes... should be booting to your rom soon, so wait !
3) Boot to recovery, mount sd-card to usb, and use gparted to check if you ext is there, 1GB and it's ext4, the other should be FAT32
- or you can remake it by using the partition sdcard on the recovery, and use gparted to convert it to ext4
Click to expand...
Click to collapse
1) Should I check the CM7/r2 screen on the Bootloader after installing the cm7/r2 to HBoot converter.zip file? I just did that and my boot loader still shows HBoot. And Yes it says S-OFF.
2) When I first boot up after installing the rom, the "quietly brilliant" screen reboots, so it would load HTC quietly brilliant, then do that over and over again. Am I supposed to wait there?
3) I created the partition with a partition wizard, and I double checked that I have an ext 4 partition on my mac.
1) which ROM are you trying to install ? If it's cool3d or aurora, just install the CM7r2, don't install the converter whatsover, once you get it done you will see CM7r2 in pink at your hboot screen. if you don't know what you're having, just download the new one here http://alpharev.nl/
2) Something went wrong... probably hboot
3) OK
ikidntu said:
1) which ROM are you trying to install ? If it's cool3d or aurora, just install the CM7r2, don't install the converter whatsover, once you get it done you will see CM7r2 in pink at your hboot screen. if you don't know what you're having, just download the new one here http://alpharev.nl/
2) Something went wrong... probably hboot
3) OK
Click to expand...
Click to collapse
Attempt #94820
I just tried to install cool3D without flashing the converter, I went to my boot loader, it's showing AlphaRev in pink then:
Bravo PVT1 SHIP S-OFF
HBOOT-6.93.1002
Did I do something wrong again?
Last attempt of mine...
Is it "Alpharev CM7 r2" ? If not, install it by downloading the flasher ultilities
http://forum.xda-developers.com/showthread.php?t=794638
Flash the hboot with the tool using the bravo CM7 r2 image from Alpharev website http://alpharev.nl/bravo_alphaspl-cm7r2.img
If you sure it's already CM7r2, then you can go on try AURORA or COOl3D ( dun install the D2EXT version , you will need another hBoot). If still cannot, I suggest you replace your SDCARD and try again.
hiohokaybye said:
Attempt #94820
I just tried to install cool3D without flashing the converter, I went to my boot loader, it's showing AlphaRev in pink then:
Bravo PVT1 SHIP S-OFF
HBOOT-6.93.1002
Did I do something wrong again?
Click to expand...
Click to collapse
If its only showing Alpharev then you are still on stock hboot. If you are on CM7 hboot you will get:
AlphaRev CM7r2
Bravo PVT1 SHIP S-OFF
HBOOT-6.93.1002
Sent from my HTC Original Desire using Tapatalk
ikidntu said:
Last attempt of mine...
Is it "Alpharev CM7 r2" ? If not, install it by downloading the flasher ultilities
http://forum.xda-developers.com/showthread.php?t=794638
Flash the hboot with the tool using the bravo CM7 r2 image from Alpharev website http://alpharev.nl/bravo_alphaspl-cm7r2.img
If you sure it's already CM7r2, then you can go on try AURORA or COOl3D ( dun install the D2EXT version , you will need another hBoot). If still cannot, I suggest you replace your SDCARD and try again.
Click to expand...
Click to collapse
&@ itachi1706
I actually thought that I could just be on stock hboot and install them then use the ROM converter.zip to boot up the ROM, but I guess not I will give it another try today! Thanks for the help!
hiohokaybye said:
&@ itachi1706
I actually thought that I could just be on stock hboot and install them then use the ROM converter.zip to boot up the ROM, but I guess not I will give it another try today! Thanks for the help!
Click to expand...
Click to collapse
Actually for cool's roms, you can remain on stock hboot. All you do is flash stock_users.zip after the Rom. Although it is better to be on CM7r2 as it gives more space for apps.
Sent from my HTC Original Desire using Tapatalk
itachi1706 said:
Actually for cool's roms, you can remain on stock hboot. All you do is flash stock_users.zip after the Rom. Although it is better to be on CM7r2 as it gives more space for apps.
Sent from my HTC Original Desire using Tapatalk
Click to expand...
Click to collapse
I just flashed CM7/r2 HBoot now when I'm at the boot loader it shows:
AlphaRev CM7 r2
and I just cleared my data, cache and dalvik cache and installed the Cool3D rom, still stuck at the quietly brilliant thing again constant reboot of that screen
EDIT: I'm gunna try to recreate my SD card for 1gb ext4
EDIT2: I recreated the partition, everything is working great now! thanks for the help!
Hello all,
This is the first time I encounter a dilemma like that!
I've been flashing ROMs for more than 6 months, changing recoveries, switching between different Hboot without a single problem. But now, I have this:
I found out that the old Hboot files had the version of 0.93.1000 and the new ones has version 6.93.1002. I flashed RunnyMede V5 stock Hboot by sebastiaan15, and it worked fine (on stock Hboot version 0.93.1000). Now I want to try the cm7r2 version of the ROM, so I flashed cm7r2 Hboot using the command line in windows (as I always do), then wiped and formatted everything (cache, dalvik, data, system...) and flashed the ROM but I am stuck on the first HTC boot screen (green font on white background) for a whole night.
I changed the recovery from RA 2.0.1 to ClockworkMod 5.0.2.0 to 4EXT but with no luck. My SD card is class 6 and partitioned with fat32 and 1GB ext4.
And by the way if I flash the new stock Hboot (version 6.93.1002) and try to install the stock Hboot version of sebastiaan15's RunnyMede V5 (the one that worked for me on the old Hboot version 0.93.1000) I am also stuck on the first boot screen!
I would really appreciate it if anyone can help.
Thank you.
Maybe your sd partition corrupted.
Sent from my HTC Desire using xda premium
Stock tables and no problems
rootSU, i formatted the whole sd card and repartitioned it but with no luck. I believe that the sd card is not corrupted as now am using the old stock hboot version and the rom is working perfectly.
Any suggestions?
supersonictt said:
Any suggestions?
Click to expand...
Click to collapse
What a capacity of your card?
sp1ke11 said:
What a capacity of your card?
Click to expand...
Click to collapse
It is 16GB class 6, partitioned with 1 GB ext4, and the rest for fat32. And it was partitioned with 4EXT recovery.
Yesterday I installed RunnyMede V5.2 stock Hboot version on my old Hboot (version 0.93.1000) and it is working perfectly. I still haven't tried the cm7r2 version of the ROM, I would like to try it but I really want to know if anyone has a solution for the case I posted in the first post. The reason that makes me want to try the cm7r2 version is the more internal space I need.
The RunnyMede V5 stock Hboot didn't work on the new stock Hboot (6.93.1002), and that is what's really confusing me!!
Thanks for help guys.
EDIT:
I just tried this:
Backed up my current ROM (RunnyMede V5.2 installed on stock Hboot 0.93.1000), flashed the new stock Hboot (6.93.1002) the way alpharev site said, then wiped everything and restored the backup, still stuck on the first boot screen!!
No
No you can not.
you must update from cm7 to cm7r2version
It can be downloaded from alpharev official website
Download the cm7r2 version named as "Bravo cm7 r2"
having system 145 mb and cache 5 mb.
Need more help??
Reply this thread I will tell you step by step method
Happy Flashing
---------- Post added at 06:46 PM ---------- Previous post was at 06:41 PM ----------
you will also need to partition your memory card to appropriate ext4, by a good method...
If you have problems reply me..
I will definitely solve your problem
and make you enjoy this amazing ROM
sachin.02 said:
No you can not.
you must update from cm7 to cm7r2version
It can be downloaded from alpharev official website
Download the cm7r2 version named as "Bravo cm7 r2"
having system 145 mb and cache 5 mb.
Need more help??
Reply this thread I will tell you step by step method
Happy Flashing
---------- Post added at 06:46 PM ---------- Previous post was at 06:41 PM ----------
you will also need to partition your memory card to appropriate ext4, by a good method...
If you have problems reply me..
I will definitely solve your problem
and make you enjoy this amazing ROM
Click to expand...
Click to collapse
Thanks for replying
Let me get this first...
I am now on stoch hboot version 0.93.1000, what I have to do is:
1. Flash cm7 Hboot.
2. Flash cm7r2 Hboot.
3. Flash the ROM.
Right?
Concerning my sd card, it is well partitioned as I mentioned before, the ext4 and fat32 are working properly on my current rom (RunnyMede V5.2 stock Hboot), so the sd card is not the issue.
supersonictt said:
Thanks for replying
Let me get this first...
I am now on stoch hboot version 0.93.1000, what I have to do is:
1. Flash cm7 Hboot.
2. Flash cm7r2 Hboot.
3. Flash the ROM.
Right?
Concerning my sd card, it is well partitioned as I mentioned before, the ext4 and fat32 are working properly on my current rom (RunnyMede V5.2 stock Hboot), so the sd card is not the issue.
Click to expand...
Click to collapse
What??
No, there is no need to flash cm7, then cm7r2. Just flash the cm7r2 version.
zedmarcus said:
What??
No, there is no need to flash cm7, then cm7r2. Just flash the cm7r2 version.
Click to expand...
Click to collapse
Yes I know there is no need for that! But I tried every possible solution... Flashing cm7r2 hboot is successful, then flashing cm7r2 rom after full wipe is also successful, but after the first boot, i got stuck on the htc boot screen!!
Solution please!!
To be more specific, I s-offed my phone with the old alpharev method, but as the site says, if the phone is rooted no need to re-root it again, I can just flash the new hboot directly.
here is what I have in bootloader:
--- AlphaRev ---
BRAVO PVT4 SHIP S-OFF
HBOOT-0.93.1000
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
Aug 10 2010,17:52:18
Hope it helps identifying my problem.
Thanks again.
supersonictt said:
here is what I have in bootloader:
--- AlphaRev ---
BRAVO PVT4 SHIP S-OFF
HBOOT-0.93.1000
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
Aug 10 2010,17:52:18
Click to expand...
Click to collapse
If this is what you have then you don't have the cm7r2 hboot. At the top of the Bootloader it should say "AlphaRev CM7 r2" in pink.
To install this hboot, download it from the alpharev site (http://alpharev.nl/). Make sure it's the "Download" one, not the PB99IMG" one.
Download Android Flasher (http://forum.xda-developers.com/showthread.php?t=794638) and use it to install the new hboot.
zedmarcus said:
If this is what you have then you don't have the cm7r2 hboot. At the top of the Bootloader it should say "AlphaRev CM7 r2" in pink.
To install this hboot, download it from the alpharev site (http://alpharev.nl/). Make sure it's the "Download" one, not the PB99IMG" one.
Download Android Flasher (http://forum.xda-developers.com/showthread.php?t=794638) and use it to install the new hboot.
Click to expand...
Click to collapse
Yes, I know that I don't have cm7r2 hboot flashed, I just put the info so if there is any suggestion I can follow.
After I flash the cm7r2 either with android flasher or with the way alpharev site describes, then install the RunnyMede V5.2 cm7r2 version, after the first boot it is stuck on HTC boot screen... This is the problem am facing with every rom I install with the new hboot versions (6.93.1002).
Any suggestions?
Thanks.
Can you try flashing another smaller rom like CM7 on the CM7R2 hboot? Just to rule out a bad ext partition on the sd.
island3r said:
Can you try flashing another smaller rom like CM7 on the CM7R2 hboot? Just to rule out a bad ext partition on the sd.
Click to expand...
Click to collapse
I will try this and report back. Thanks for the suggestion
supersonictt said:
I will try this and report back. Thanks for the suggestion
Click to expand...
Click to collapse
Cyanogenmod 7.1.0 worked on cm7r2 hboot! So now what is the problem with the other rom (RunnyMede)?
Could have been a corrupt download. I just saw there is a new version out. Download it and see if that one works.
supersonictt said:
Cyanogenmod 7.1.0 worked on cm7r2 hboot! So now what is the problem with the other rom (RunnyMede)?
Click to expand...
Click to collapse
Well, if CM7 boots there must be something wrong with your sd. Try to completely wipe and reformat it with Gparted, then create an ext4 (1gb) followed by a fat32 partition. If this still doesn't work, it means the sd must be corrupt and you have to use another one.
Edit:
Or yes, it could be a bad download as zedmarcus said. I thought you checked the MD5 hashes before flashing
sachin.02 said:
you must update from cm7 to cm7r2version
Click to expand...
Click to collapse
Waht?!
sachin.02 said:
I will definitely solve your problem
Click to expand...
Click to collapse
Please don't...
island3r said:
then create an ext4 (1gb) followed by a fat32 partition.
Click to expand...
Click to collapse
The other way around.
SwiftKeyed from my HTC Desire using XDA App.
when i flash bravo cm7r2 and install a custom rom my phone is stuck at HTC logo but when i flash it to stock it's running again what's the problem can anyone help me please???
Which ROM did you flash?
Runnymede_AIO_V6.1_Special_Edition
goceee said:
Runnymede_AIO_V6.1_Special_Edition
Click to expand...
Click to collapse
What is your Radio/Baseband version? Are you on stock HBOOT? More info please.
well
AlphaRev CM7 r2
BRAVO PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
you see when it's alpharev cm7r2 i can only flash mildwild rom without getting stuck at htc logo screen i was using Runnymede_AIO_V6.1_Special_Edition and it was great but i tried to reflash it and i got stuck at htc logo screen..
Suggest you re-read the Rom faqs/install instructions and check your sd ext is big enough, you're selecting INT2SD-S etc
beachcomber said:
Suggest you re-read the Rom faqs/install instructions and check your sd ext is big enough, you're selecting INT2SD-S etc
Click to expand...
Click to collapse
i've read them but no luck..
i can't install any rom using AlphaRev CM7 r2 .. (
is ext4 partition not corrupted? check it in 4ext recovery... for Seb's rom nearly all important files are there
you a) don't have an sd-ext partiton
b) aren't giving the ROM enough time to boot. Sense ROMs take about 10 minutes the first time, they aren't virgins.
Also, I assume you did do a full wipe before flashing?
Sent from my HTC Desire using XDA
goceee said:
when i flash bravo cm7r2 and install a custom rom my phone is stuck at HTC logo but when i flash it to stock it's running again what's the problem can anyone help me please???
Click to expand...
Click to collapse
In the aroma setup,what option did ya choose: basic or customize? You have to choose customize setup so that you can choose the right 1 for your hboot, A2SD, IN2SD+S and so on. Im using runnymede aio v6.1.1 s/e IN2SD+S and im using alpharev data++, 1gb ext4 (no swap) and works fine. Try full wipe, and repartition sd card to 1gb ext4 and try the rom again
Sent from my HTC Desire
well you see when i install the rom at alpharev stock hboot it's fine but when i flash alpharev cm7r2 and perform full wipe also repartition my sd card i install the rom and i'm stuck at htc logo
goceee said:
well you see when i install the rom at alpharev stock hboot it's fine but when i flash alpharev cm7r2 and perform full wipe also repartition my sd card i install the rom and i'm stuck at htc logo
Click to expand...
Click to collapse
How do you flash hboot, via fastboot or .zip?
Sent from my HTC Desire via flashes and thunders
Plus: which recovery do you use?
Sent from my HTC Desire via flashes and thunders
That ROM is supposed to be able to handle being installed with stock and then flashing cm7r2 with caches wipe only. Did it myself. Search that thread.