my desire Z is bricked, although by pressing volume UP+power button PC recognizes it as qualcomm cdma tech device, i am now trying to flash it via QPST, but QPST is not recognizing the phone, any idea ?
Related
Hi,
I purchased this phone in a wholesale lot. It powers on and is recognized on the computer as "Qualcomm HS-USB QDloader 9008" after installing the USB Host drivers. The screen stays blank, and QPST is telling me that the phone is in download mode (Q/QCP-XXX).
I need some help on getting the firmware loaded onto the device, if someone could get me a dump of the G2 using QPST or some other app, I'd appreciate it.
i have also bricked my desire Z by installing incorrect Hboot, now its not turning on, volume down+power combo not getting me to the bootloader, its not even recognized by my computer, i have also installed QPST QXDM, what did you install to get your phone recognized by your PC
desirezbilal said:
i have also bricked my desire Z by installing incorrect Hboot, now its not turning on, volume down+power combo not getting me to the bootloader, its not even recognized by my computer, i have also installed QPST QXDM, what did you install to get your phone recognized by your PC
Click to expand...
Click to collapse
you can try getting to hboot by doing trackpad+volume down+power
evilcuber said:
you can try getting to hboot by doing trackpad+volume down+power
Click to expand...
Click to collapse
i tried but that's also not working
My HTC Evo 4G will only boot into HBOOT and fastboot. When in either of these modes, only the power key is functional. I cannot use the volume keys to select options in these modes. Additionally, my computer will not recognize the device via USB. It simply does not respond and does not think there is a device connected to the computer. I have installed, uninstalled, and reinstalled drivers as well as tried multiple cables and computers.
If anyone has a solution for how I can salvage this phone, I would greatly appreciate it.
Thanks,
Go L Den
I can bump dis now?
Help?
So yesterday i tried flashing super LTE lollipop and being the stupid person that i am i flashed the E980 version instead of the actual version E986 (which i found later by removing the battery :| )
When rebooting the phone the home button is constantly on while the screen backlight turns on and then off again and again.
No lg logo, no recovery and no download mode.
Only when i plug in the phone to my pc it detects it as lg androidnet usb serialport and not Qualcomm HS-USB QDLoader 9008 like in other threads. Can i still get stock rom back? help much appreciated.
Edit: Okay i don't know why but apparently when i pressed vol + and vol - simultaneously and then connected the usb to pc despite showing a black screen it actually was download mode because using Lgflashtools i managed to install stock jelly bean. And i thought i was full hard bricked :/
reserved.
mine is detected as Qualcomm HS-USB QDLoader 9008 but nobody has achived to get live my OGPro...
Have you found the required TOT file and DLL?
I am having the same problem with LG G Pro e98820c after flashing wrong rom and unplug USB during flashing process.
Now the phone is stuck at Brick qualcomm hs-usb qdloader 9008 mode. I have some tools such as Smart diagnosis tool, BoardDiag, Androidbrick, Qfil/QPST ....But I have no proper guide how to use them to unbrick qualcomm hs-usb qdloader 9008 mode.
Have you got a solution for your brick phone.
Thanks , Sho Thant.
I was trying to use QFIL to update the phone and get rid of chinese characters,and now my phone is completely blank with no sounds or vibration.The computer still connects to the phone in QFIL but doesnt show as a device on the computer.
Any help in fairly simple language would be great.
alan53 said:
I was trying to use QFIL to update the phone and get rid of chinese characters,and now my phone is completely blank with no sounds or vibration.The computer still connects to the phone in QFIL but doesnt show as a device on the computer.
Any help in fairly simple language would be great.
Click to expand...
Click to collapse
Go to stock recovery if it is possible( both volume + power button) then power off and then press volume up anx cpnnect to pc. What happened now?
Thanks i tried stock recovery nothing happens ie no reaction from the phone,if i hold the power button for a minute and then press volume up and connect to pc the pc bleeps
Does Qualcomm port shows?
Can you use qfil program in this state?
yes qualcomm shows in device manager and qfil seems to work but ends in sahara fail
alan53 said:
yes qualcomm shows in device manager and qfil seems to work but ends in sahara fail
Click to expand...
Click to collapse
qualcomm 9008 or 9006?
Starchm said:
qualcomm 9008 or 9006?
Click to expand...
Click to collapse
qualcomm 9008
got it fixed somehow!
Help please,
My phone messed up when updating via orangefox, now wont switch on.
if i hold the power putton and plugin the phone i get:-
Qualcomm HS-USB QDLoader 9008 (COM10)
i have MI FLASH and have downloaded ugglite_global_images_9.6.27_20190627.0000.00_7.1_global
i fire up mi flash, it finds the device, i login and it says authorised for this computer
select the folder, set clean all and press flash, but it fails everytime, it says cannot not read from com port?
any ideas???
thanks,
mark.
I had same problem. Use Only Mi flash 2016.
not other 2014,2015,2018, or Beta.
Can your device to fastboot mode by press Power + Vol-. If you can, try to connect your device to Computer again in fassboot mode and make sure your computer has installed driver correctly for your device and make sure adb fastboot installed too.
check your device in computer, is it connected or not, if your device connected, you can flashing again with Mi Flash 2017
If you fail again flashing your device, I suggest you try final solution about flashing problem, it's should be open your phone backcover and try EDL point to connect your device with computer
gemadar said:
Help please,
My phone messed up when updating via orangefox, now wont switch on.
if i hold the power putton and plugin the phone i get:-
Qualcomm HS-USB QDLoader 9008 (COM10)
i have MI FLASH and have downloaded ugglite_global_images_9.6.27_20190627.0000.00_7.1_global
i fire up mi flash, it finds the device, i login and it says authorised for this computer
select the folder, set clean all and press flash, but it fails everytime, it says cannot not read from com port?
any ideas???
thanks,
mark.
Click to expand...
Click to collapse
Connect me on Whatsapp +9197Four3Eight338Zero8. I can guide you to recover.
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
gemadar said:
Help please,
My phone messed up when updating via orangefox, now wont switch on.
if i hold the power putton and plugin the phone i get:-
Qualcomm HS-USB QDLoader 9008 (COM10)
i have MI FLASH and have downloaded ugglite_global_images_9.6.27_20190627.0000.00_7.1_global
i fire up mi flash, it finds the device, i login and it says authorised for this computer
select the folder, set clean all and press flash, but it fails everytime, it says cannot not read from com port?
any ideas???
thanks,
mark.
Click to expand...
Click to collapse
If your Mobile is India Redmi Y1 with 32GB ROM.. Then its not ugglite.... Its UGG..... falshing ugglite bricked all the way to blinking light...!